Bug? Frame moves after placement. IDCS6

I've been using IDCS6 for about 2 weeks now and I've noticed that often when I'm moving a frame with a linked graphic in (by clicking on it with the selection tool and dragging the mouse) and snap it to some guides/smart guides, I'll place it and suddenly it will shift from where I've placed it.
I've done a bit of testing and it seems to happen inbetween me letting go of the mouse button and the frame contents re-drawing itself. If I move my mouse in this time period the frame shifts to the new mouse position. I would expect ofcourse for the position to be used of when I lift my mouse button and for any subsequent movement of the mouse whilst the frame is redrawing its contents to be ignored.
I have tested this on 2 Macs which both show the same behvaiour (both running OSX 10.8 ML).
I have also done a test in CS4 (which I just upgraded from) and it does not have this quirky behaviour. I also notice that CS4 redraws the contents of the frame considerably quicker.
Is anyone else experinceing this/confirm the behaviour? Is it a bug?
PS - If what I'm describeing isn't clear I can do a screen cast!

No problem, screen cast uploaded here:
https://dl.dropbox.com/u/14364688/IDCS6_screencast.mp4
Just to be clear, a brief description of what is happening. The first time I move the frame it works fine, I tried to make the problem happen but I think the frame contents redrew too fast.
The second time I move the frame (starting at 7 seconds in the video). I dragged the frame until the smart guides show -> Released the Mouse button -> Move the mouse quickly down.
You will see the final position of the frame is not where I released the mouse button but at the position of my cursor when the frame has finished redrawing.

Similar Messages

Jerky and abrupt frame movement after rendering (Clip)

Hello,
Would anybody happen to know what's the reason of jerky and abrupt frame movement after rendering?
Please go to the link http://www.youtube.com/watch?v=ANTpUzk3jYY and watch the clip.
- I have a 4Core CPU (Intel i7)
- Graphic Card: Quadro FX 4800 (with the latest 64-bit drivers installed)
- The most recent version of Elemental Accelerator (with the latest drivers installed)
- Adobe After Effects CS4, Adobe Premiere PRO CS4.2
- Adobe Photoshop CS4 Extended
- Windows 7 64-bit
- RAM memory: 12GB
Do you know why does this happen?
Thank you!!
Giannis

I use a Full HD 1080i SONY Semi professional cam (2,930.00 $). I use AVCHD file format which is accepted by premiere and after effects. I could convert it but I would not like to spend time since this kind of format is accepted by the software.
I don't have these problems all the time. Eventually I managed to export the clip properly. I think it has to do with temporal memory. I don't know. I have to check all the memory data for best peformance and best rendering. I think I have already done this but I will dig a little deeper in this..

Movie after playing doesn't stop at the last frame.

Movie after playing doesn't stop at the last frame but goes back to frame one. Movie stops normaly when played on iMac but makes trouble when placed in the iBooks Author. That's not eve problem of looping (repeat none). Help, this makes me mad.

laura4life
You have fragments (leftovers) beyond the end of the Timeline content that you intended.
I am going from an Elements Windows workspace, so please translate into Mac accordingly.
Expand your Timeline content to the maximum with the Zoom Out Zoom In slider above the Timeline.
Press the End key of the computer keyboard. That should take the Timeline Indicator to the fragments which must be deleted.
Explore all the tracks in that area.
Repeat the End key press until the Timeline Indicator stops at the end of the intended Timeline and not some 3 hours afterward.
What you find at "end of track" could be fragments or files that you moved out of the way of the active project and forgot were there.
The fragments typically present as thin vertical black lines scattered about the tracks.
Please let us know the outcome.
Thank you.
ATR

FRAME "GLITCH" AFTER MOTION EXPORT

HELP!
I'm having a problem with some sort of frame "glitch" when I export my Motion project to Quicktime.
Everything will be playing back fine & then there will be one frame that looks all whacked out.
Just for that split second.
It's in different places every time I re-export.
You can view the bad frame here: http://www.photropics.com/bad.jpg
& the good frame(right after it) here: http://www.photropics.com/good.jpg
This project has a lot of movement going on including a particle emitter i the first 20 seconds but that's not where the glitch is.
You'll see that in this particular export, the glitch is actually in a clone layer that I'm using as a reflection of a video.
This is inconsistent though, it can be in different places in the scene in every export.
Export settings are on RENDER BEST / ANIMATION / FULL RESOLUTION / 720 X 480
Same as my setup.
Very frustrated!
I'm starting to question my machine.
I'm working with a PPC G5 Dual 2 Hhz. machine with 3 gigs of RAM.
It's got the original graphics card in it, which is always a problem for me but will that affect the export quality?
I know it's not an Intel machine but it should be able to handle a 1.5 minute clip from Motion. Shouldn't it?
I'll have a new Intel machine in a few months but need some help with making this work if possible.
Thanks in advance.
Any help is appreciated.
JRM

Thanks for the response Adam.
I didn't mean to be so vague about the details originally.
I am exporting out of motion as a Quicktime movie to eventually be brought into DVD Studio Pro & burned onto DVD.
I tried bringing the file directly into DVDSP as a Motion project & it took 18 hours to do a build but
as a QT Movie, it only takes minutes.
If I change the animation codec, will I lose quality? I want it to be as clean as possible.
I have cleared the RAM cache & with the same result.
I might try the FCP import idea but I haven't used Compressor before. The last time worked with video & I used FCP was when it was in version 2 so I'm somewhat new. I've crashed coursed in FCP 6, LiveType, Motion & DVDSP so I just haven't gotten to Compressor yet.
Tell me though, did you look at the samples I uploaded?
Is this just a weird dropped frame or what do you think?
I also tried exporting at Half size & the glitch is still there & in the same place.
I thought it might be something within my motion project in conflict but there's nothing in the particular spot that is starting or stopping or anything.
Anyway, thanks again.
JRM

HT4859 I am unable to recover a rented movie after changing one iPad for another. Music and books were easily restored

I am unable to restore a rented movie after Changing out my iPad for a new one. All music and books were restored easily

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

543 Movement After GR?

Long story short, I forgot add some supplied material to a L type subcontract order. The PO has already been received in. Is there a way to do the 543 movement after the GR has been completed? If not, what's the proper way consume the inventory?

Hi,
the subcontracting cycle tells...
To make the PO with item category "L".The goods is
tranferred to subcontractor by 541 movement type.for this
movement note NO accounting doc takes place.when GR is done
automatically,543 movement takes place which take care of
the consumption os components.
So there is no chance of 543 movement after GR in this cycle..543 movement is auto matic in subcntracting....
For More Information..please follow the below link...
SUB CONTRACTING
Hope it will help you...
Regards,
Udaya.
Edited by: udayareddy on Oct 2, 2011 6:59 PM

Embed question - play one movie after another

I am trying to figure out how to play a short 10 second clip before each movie on my website. The clip may be a short ad or a promo and will depend upon the content of the main video. What is the code that enables you to play one move after another in a web page. I don't want to edit the two clips to become one cos over time the ads and promos will change. In Realplayer I remember using SMIL but how is it done in QT. I will eventually write code to write out the Embed tag but now i am just experimenting. Here is what my drupal site puts out



<object type="video/quicktime" width="483" height="381"
data="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4">


<param name="src" value="http://www.1234567.com/files/videos/Mpeg4TestSnapX-480x360.mp4" />
<param name="AUTOPLAY" value="true" />
<param name="KIOSKMODE" value="false" />
Your browser is not able to display this multimedia content.
</object>
Problems viewing videos?
Download latest Quicktime Player

Embed the initial movie clip as normal, but give it an HREF property.
Set the source for the HREF to be the next movie, set autohref=true, and set target="myself". It's the same technique you use to build a poster movie but (a) instead of having the poster movie open QT Player, you have its target open in its own frame and (b) instead of waiting for a user to click the poster, you have the poster movie "click itself".
Code that I used a very long time ago to display a "Loading..." graphic as a movie loaded (waste of effort, actually, as the movie is fast start and loads very fast):
<embed
src="loading.mov"
height="208"
width="256"
autohref="true"
href="Worm.mov"
target="Myself">
</embed>
(of course this was before I learned about OBJECT and the need to use OBJECT to activate the ActiveX control in IE. Also, it's worth noting that the javascript hack isn't strictly necessary for IE users, but without it, IE users will get a security dialog before they get the movie.)
The code above can be found on:
http://capital2.capital.edu/admin-staff/dalthoff/adventures/worm.html
--Dave Althoff, Jr.

Managing various event listeners in multi-frame movie

I'm working on a gunslinger game. I have numerous frames
which correspond to different stages of the game. The frame that
corresponds to the actual gameplay has a really involved
ENTER_FRAME function attached to particular item on the stage. When
the game is over (or an error occurs, or the network connection
fails) I want to leave the gameplay frame and move to some other
frame. When this happens, I would like the ENTER_FRAME function on
the gunslinger to be removed because the player may finish a game
and then re-enter the gameplay frame later after selecting a new
opponent.
QUESTION: Can anyone recommend a good way to manage the
keyboard event listeners, all the button event listeners, etc? As
you might imagine, I have no reliable way to determine which frame
might be entered after the gameplay frame because the frame change
could be triggered by a variety of different reasons.

I have tried using hasEventListener to check for an existing
ENTER_FRAME function before adding the event listener again but it
never seems to notice that there is an existing enterframe function
running. Furthermore, when I leave the frame, the enterframe
function (which is attached to a particular movie clip on frame 2)
continues to run even though that movie clip doesn't exist on any
other frame in the flash movie.
The first frame in my movie just has a button that takes the
movie to frame 2. frame 2 has a movie clip (myMovie) and a button
(btnFrame1) which goes back to frame 1. It also has the attached
actionscript.
I start the movie.
I click 'goto frame 2'
the enterframe listener is added and starts to output trace
statements of the current frame of myMovie (e.g., 1-2-3).
i click 'goto frame 1' on the main movie
although i am looking at frame 1 of my main movie which has
no instance of myMovie, the enterframe function keeps tracing the
current frame--interestingly, the frame of myMovie does not
advance...it stays on 1, 2, or 3 and announces that frame over and
over again.
Repeating the visit to frame 1 and frame2 over and over again
results in more listeners being added over and over again.
I have uploaded a sample FLA here:
http://jaith.net/questions/listenerExample.zip
I hope that you might help me determine how to remove the
listener upon exiting this frame. I don't want that enterframe
function running (and referring to movieclips that don't exist)
when I exit the frame where it is relevant. I'm wondering if I
should try adding the event listener to the root movie
instead.

How can i let a move clip complete his motion tween movement after dragging and dropping it

hi how can i let a move clip complete his motion tween movement after dragging and dropping it
i am using this code and there is a motion tween applies to the movie clip r_mc
r_mc.addEventListener(MouseEvent.MOUSE_DOWN,fun); r_mc.addEventListener(MouseEvent.MOUSE_UP,fun2); function fun(event:MouseEvent):void { stop(); r_mc.startDrag();
function fun2(event:MouseEvent):void {
play(); r_mc.stopDrag();

i have a simple .fla file wich contains MC that has
a motion tween(its moving from the left to the right of the stage)
this motion tween covers the whole time line ( there is only 50 frames in the time line)
i mean in the frame 1 the MC appears in the left of the stage
and in the frame 50 the MC appears in the right of the stage and there is a motion tween between them
every thing till now working well
i want to make that MC dragabble
so when i drag the MC i will use stop()
and when i drop it i will use play()
but the problem is that the mc doesnt move and complete
his motion tween movement when i drop it
for example the MC will be in the middle of the stage in frame 25
in this frame (25) i am draging the MC ,stoping the timeline,dropping the MC and resum playing the timeline again
but the MC freezes in the middle of the stage and doesnt go to the right of the stageo until the flash loops and start from the frame 1 again
here is the example wich i am worikng on
http://www.mediafire.com/?ia47r4owha7sz8v
thank u very much and sorry for my bad English

AE CS5 - Shape Layer - Anchor point moves after position keyframe

I am experiencing unintuitive (to me) behaviour with a brand new shape layer. Here are the steps to reproduce the issue. I have made a screen cap of the problem but can't figure out how to upload it to this forum.
1. In an existing composition, I create a new Shape Layer
2. By default the anchor point (center point) is in the dead center of the shape layer. Perfect.
3. I turn on Position keyframing, and add a position keyframe at my current time
4. Instantly the anchor point now jumps to the center of the composition, and so now when I scale my shape layer it doesn't scale properly
If I try to use the Pan Behind tool, I get position keyframing. Besides, I SHOULD NOT HAVE TO DO THIS, since the anchor point was in the correct spot to start with, and it's only because of this keyframing "bug" that the anchor point jumps.
What am I missing or doing wrong? How can I add a position keyframe to a BRAND NEW LAYER that has no other animation on it, and still keep the anchor point in the dead center of my shape?
Thanks for your advice,
Tom

Thanks to Rick and Mylenium for your helpful answers. Rick, I'd prefer not to have to manually reposition, because I'm never going to be as mathematically precise as the software for positioning the Anchor Point dead center.
Using the transform controls on the shape rather than the global container certainly did the trick! You guys are great. Thanks.
[rant]
In my defense as far as the constant exhortations to "RTFM", we all know that most veteran software users only go to the manual when there's a problem. You also know that Adobe's help system (particluarly in regards to search) has gotten worse over the years, not better. So when I run into a situation like this, I'm going to search through the help for what I believe the problem is: namely "anchor points", "transformations" and "keyframes", and maybe "shape layers". This is a fair amount of research, and it's exactly what I do as my first line of defense.
The second line of defense that most tech savvy folk do, is a Google search; for example: "anchor point moves after position keyframe" or "After Effects shapes layer anchor point moves keyframe" etc. And you spend your time sifting through forums trying to find the relevant answers. I feel that THAT is my true due diligence, rather than reading the F'n Adobe manual that is so very very sparse.
So after my due diligence, I turn to the experts communities, because there I know I will get educated, reliable help within a reasonable turnaround time. And because I myself contribute to these same forums in areas where I have higher than average expertise. The Adobe Forums have proven to be one of the great online resources.
Finally, now that I have a great answer from two knowledgeable experts (thanks again!), I've also enriched the community, because of the way I have crafted my post title, hopefully the next poor ******* who has a similar problem and a similar methodology to finding resolution will stubmle upon my post because I've tried to overload the title with relevant keywords that will generate hits in google.
Through my question, and your accurate answers, the global knowledgebase has improved.
So forgive me for not memorizing the F'n Adobe online help. I go to the resources that are the most useful, expedient, and provide the greatest value as a whole.
[/rant]
Peace,
Tom

HD icon moves after restart

Hi, silly, but annoying problem. Recently, my HD icon moves after I restart my machine. Only icon to do this. I usually keep it in the upper right hand corner, but now it seems happier in the lower right hand corner - below a folder I have there. This is really annoying. I keep moving it back, and the stubborn fella returns below. I tried in preferences to uncheck it and then recheck it, but no go. Any thoughts? It's driving me crazy. Even more, why did it just decide to change zip codes?
Thanks all.
M

You might try Onyx or Yasu (utilities that are donation ware/freeware) and delete the ds.store files which are supposed to keep track of this. You could also delete your user finder plist(com.apple.finder.plist). If the files are corrupted then they can mess things up.
Also, as Ali says, putting them too close to the side of the screen is like telling the icon " Your master has screwed up and you are free to go where ever you want now.". Put it close to the upper right corner where you want then let the Finder accurately place it by selecting View and then Cleanup.
Occasionally, my icons like to wander. I just get used to it (or have been beaten down by it) and no longer ask why.

Inventory: Movement after count with post date before the count date.

Hi,
We have stock movements all the days of the week.
We conduct physical inventories on Sunday mornings. There are not stock movements on Sunday mornings (stock movements on Sunday starts at night).
Usually we create the SAP Physical Inventory Document on Fridays, assigning Saturday as the Planned Count Date.
We enter the SAP Physical Inventory Count on Sunday (at the end of the count) or on Monday.
How you recommend us to use SAPu2019s Physical Inventory feature in order to calculate the Book Inventory considering all stock movements with posting date less than or equal to Saturday?
Please, suggest us a solution that If we register a movement after we enter the count but with post date before the count date (and the count is not posted yet), the Book inventory is modified accordingly.
Thanks in advance for your support!!

SAP takes the book inventory in the moment you enter the count.
Best you set block movements , this block will be removed automatically when you enter the count. So you can prevent users from posting until you have entered the count.
If you set the freeze book inventory, then SAP takes the book inventory in the moment you create the document.
This is not a good way if you still have movements after inventory document creation and actual count.
You have to make sure - organisational wise, outside SAP - that all movements that happened before inventory count are posted before you start entering the count. There is nothing in SAP that can help you in this case.

[svn] 2649: Committing Josh McDonald' s patch for bug SDK-15795 after review and testing.

Revision: 2649
Author:   [email protected]
Date:     2008-07-29 09:33:23 -0700 (Tue, 29 Jul 2008)
Log Message:
Committing Josh McDonald's patch for bug SDK-15795 after review and testing. Various minOccurs and maxOccurs scenarios could lead to short circuit logic that would not release the schema stack scope if a reference was previously resolved.
Checkintests: Pass
BlazeDS 3.0.x webService flexunit tests: 100% Pass
BlazeDS 3.0.x webService mxunit tests: 100% Pass
QE: Yes, please review schema that is described in this bug and consider adding a test case. Note that I'm seeing intermittent failures on a few tests that pass when re-run (likely due to timeouts being too aggressive?).
Doc: No
Reviewer: Svetlin
Bugs:
SDK-15795 - minOccurs on breaks XMLEncoder
Ticket Links:
    http://bugs.adobe.com/jira/browse/SDK-15795
    http://bugs.adobe.com/jira/browse/SDK-15795
Modified Paths:
    flex/sdk/branches/3.0.x/frameworks/projects/rpc/src/mx/rpc/xml/XMLEncoder.as

Hi.
Alot of good feedback. Personally I miss some keybindings, such as for branch switching.
Anyways, on the github corruption issue it seems like this was fixed in 0.8.4 according to http://www.eclipse.org/forums/index.php?t=msg&th=183637& amp;start=0&S=81dfec74c1b979b21614f923fb09b1da

HT3964 My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. sometimes it never gets past the background. Cannot log back in.

My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. Sometimes it never gets past the background of the homepage, desktop doesn't seem to load. After multiple forced shut downs and left to run for hours, sometimes the desktop loads but the dock does not respond when applications are opened. The computer is then unable to shut down normally. Forced shut downs are necessary most times. Time machine backup takes extremely long, and attempts to use the time machine to bring the laptop back to the time befiore the problem arose was met with extremely slow and hung time machine function.
Please help!

There isn't much besides a failing hard drive or other hardware fault that can cause those symptoms. Run the Apple Hardware Test, or just take it to an Apple Store for testing.

Downloading movies, my iTunes reported "error 50" and won't finish downloading any movies AFTER I've paid for them.. What do I do?

Purchasing movies, my iTunes reported "error 50" and won't finish downloading any movies AFTER I've paid for them.. What do I do?

Hi..
Could be the following:
Firewalls
Web Accelerators
Ad Filters
Virus Protection Software
From here > iTunes Store: "Error (-50)" when downloading purchased content

Bug? Frame moves after placement. IDCS6

Similar Messages

Maybe you are looking for