Bug in 15.1(3)T3 when trying to add an IPv6 name-server?

I have an 877 that I have configured with IPv4 & IPv6 (via a tunnel broker).  I also VPN into this using VPDN with Windows 7 clients.  I have configured the VPN for IPv6 and this is working well.  Unfortunately an IPv6 name-server isn't being sent to the VPN client so I tried adding the IPv6 name servers to the 877 and it won't accept them.  I think this is a bug as I can add them on a Catalyst 3560 I have running 15.0(1)SE.
cisco-877(config)#ip name-server FEC0:0:0:FFFF::1
Not a valid name-server address - 254.192.0.0
Is this a known bug and is it fixed in any other releases?
Andy

I managed to work around my issue by configuing both IPv6CP for address assignment to the client and DHCPv6 relay to supply DNS (and other) information.  See the IPV6 Dial Access thread - https://supportforums.cisco.com/thread/2127028?tstart=0
I am not sure this is the final configuration as it appears there is the possibility DNS will find its way into IPv6CP - http://tools.ietf.org/html/draft-huang-ipv6cp-options-00
Andy

Similar Messages

  • Access Denied when trying to add DP to Windows Server 2003

    Hello. My environment is SCCM 2012 SP1. I have a Windows Server 2003 SP2 machine that I need to set a distribution point up on. I have all the prep work complete like IIS installed, local administrator, etc. I have also already setup 300 DPs successfully
    on the same platform but for some reason this one is causing me problems. I have made sure that the secondary server I am setting the DP up from is in the local administrators group. However, I keep getting access denied errors. I have checked and can access
    the ADMIN$ share on the machine. Any ideas what I am missing.
    Failed to install ISAPI on server.lab.local, failed to copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
    \\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll, Win32 error = 5

    Hi,
    Have you tried to access  \\server.local.lab\ADMIN$\system32\inetsrv or copy E:\ConfigMgr12\bin\x64\..\i386\smsfileisapi.dll to
    \\server.local.lab\ADMIN$\system32\inetsrv\smsfileisapi.dll using the secondary site computer account?
    Best Regards,
    Joyce Li
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • I get error message when trying to add key tags

    I get error message when trying to add key tags

    You should always backup your iPad before ever doing anything major that coould result in a catastrophic loss is something goes wrong. You can then usually restore from the backup when your iPad has recovered.
    You should also be sure to have transfered any new purchases directly to your iPad to the iTunes app on your computer on a regular basis.

  • Error message when trying to create a unique name

    Why do I keep getting an Error message when trying to create a unique name for a location on your site. I am simply looking to use your free 2GB space to store some pics and vids but keep getting an error message.

    How come Leopard let me use the WGM in standard mode?
    While SA complains that it won't work in Standard Configuration, WGM does not. There is some fault in the logic of this for which I don't have an explanation.
    If I want to get control on Dock, selection of Home folder, config of Proxy... which I think are basic things, do I really need the advanced mode?
    If you wish to have complete control of all client settings, yes. There really is no disadvantage of using an Advanced configuration other than the learning curve.
    So if I switch to advanced mode, there is good chance I won't get this error message anymore, right?
    Yes.

  • Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.

    Error message when trying to add signature. An error has occurred that may be fixed by installing the latest version of the Japanese Language Support package.  How can I fix this?
    Thanks
    [email protected]

    What is your operating system?  Reader version?

  • When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    When trying to add music to a slide show from my PC to TV through Apple Tv the photos are fine but I get an error message that says the music cannot be downloaded.

    Because the location for each song in your library is on your hard drive.  If the hard drive isn't there, how can iTunes play it?
    You'll have to move/copy the music from your hard drive to your computer's hard drive.
    Basically, EASIEST way to do all this, if you don't care about your play counts, etc...
    -Delete EVERYTHING from iTunes, so that your library is now empty.
    -Go to "Advanced" inside of the "Preferences" window, found in the "Edit" drop-down.  You can also access Preferences by pressing Ctrl+, (Press Ctrl and the comma key)
    -Change your iTunes Media Folder Location to something simple, but on your computer. I use C:/iTunes.  Make sure "Keep iTunes Media Folder Organized" and "Copy files to...." are both checked.  You can close Preferences now.
    -Now, drag and drop your music from your hard drive into your iTunes library.  iTunes will automatically add the music to your library, as you would expect, and also creates a copy of each file to place into that iTunes Media Folder you just created.
    Shouldn't have any more problems...

  • Error  message when trying to add new user

    Hello,
    Customer is working on 2005B (2005B 7.40.252 SP00 PL39).
    They are working on this database since 2009.
    No upgrade was recently done.
    when trying to add a new user they get athe following error:
    "A user was added outsite the application. Delet it, or preform'Restore Numbering' [Message 3512-7]"
    Could you please advice.
    Regards,
    Maya

    Hi Maya......
    Go to Administration--> Utility and select the restore no. series.
    Update this and try to add User.
    But do it first in your test DB.....
    Regards,
    Rahul

  • I continue to get an error message when trying to add Header

    I continue to get an error message when trying to add Header & Footer.  Therefore I am unable to add page numbers to my pdf.  Help!!

    Sounds like the PDF has an issue. You can try to save it, close, and reopen to see if that fixes it. If there are no tags or other markup, you could print it to a new PDF and try on the new file.

  • Class is not appearing in "Java Batch Job Class Search" when trying to add.

    Hi,
    I have oracle CC&B 2.3.1, with SDK 2.2.0.12. I am trying to create new java batch job class by copying an existing one and modifying it to be used with new Batch Control .
    Steps are as follows:
    1-Created file by copying the exiting file
    CreateLatePaymentChargesProcess.java ; and only changing the name of the class:
    public class CmCreateLatePaymentChargesProcess
    extends CmCreateLatePaymentChargesProcess_Gen
    File location :
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess.java
    D:\spl\ccb231\applycm\ssgc_patch\java\source\cm\ CmCreateLatePaymentChargesProcess_Gen.java
    2-Run ApplyCm build successfully , which generated these files:
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\ CmCreateLatePaymentChargesProcess_Gen$1.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ThreadParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen$ToDoProperties.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$CmCreateLatePaymentChargesProcessWorker_Gen.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen$JobParameters.class
    D:\spl\ccb231\java\target\cm\com\splwg\ccb\domain\billing\batch\CmCreateLatePaymentChargesProcess_Gen.class
    All the above classes are part of CM.jar file
    ContextManagedObjects.xml ;  contains these information
    <com.splwg.shared.environ.ContextManagedObjectData>;
    <domainPackages/>
    <lookupFieldClasses class="tree-map">
    <no-comparator/>
    </lookupFieldClasses>
    <cobolAlgorithmInterfaceExtensions class="tree-map">
    <no-comparator/>
    </cobolAlgorithmInterfaceExtensions>
    </com.splwg.shared.environ.ContextManagedObjectData>;
    packageMetaInfo.xml was not created
    Still the class is not appearing in "Java Batch Job Class Search" when trying to add a new program name referencing this java class.
    I tried restarting the Tomcat application server, still not appearing.
    Where did I go wrong about it?
    Thanks
    Edited by: cc&amp;amp;amp;b-user on Jul 29, 2011 12:39 AM
    Edited by: ccb-user on Aug 2, 2011 9:28 PM
    Edited by: ccb-user on Aug 7, 2011 11:36 PM

    Hi,
    Did you copying the base file CreateLatePaymentChargesProcess.java?
    I also create a new batch job which copying the CreateLatePaymentChargesProcess batch code the only difference in getBills() method query and inner class CreateLatePaymentChargesProcessWorker extend CmCreateLatePaymentChargesProcessWorker_Gen, instead of CreateLatePaymentChargesProcessWorker_Gen.
    The batch is working fine in my end.
    Thanks,
    Atul Singh.

  • I am getting an error when trying to add a caption.

    I get the following error when trying to add a caption to a photo.   "An error occurred while reading files or writing files to disc.  The disc may be full or there may be a problem with the source media."    I am running Windows 7 Pro.   The files are located on my c:.   The drive has 274 GB Free so space isn't an issue.   I have tried deleting a file and readding it to the same catalog and still the same problem.   I have copied the file to the desktop and cataloged it from there and the error went away.  
    If i check on the folder attibutes it is set to read-only but the desktop folder is as well.   If i try to remove the read only it only resets itelf to read only again.   Once i get the error another file shows up with the image name plus -edTM P-1 and it has the caption on it.  

    I was able to get it to work.  The root folder which held the pictures had a lock on it through windows 7.   Even though the drive was shared, I still had to go into the folder properties and share it with everyone.   Once i got the lock off and rebooted I was able to add captions again.

  • An Active Directory error 0x51 occurred when trying to check the suitability of server

    We have several exchange administrators and two exchange 2010 servers and one exchange 2007 server. I am getting the following error message
    when opening up Exchange Management Console on one of the exchange 2010 server. 
    "An Active Directory error 0x51 occurred when trying to check the suitability of server 'dc101.domain.local'. Error: 'Active directory
    response: The LDAP server is unavailable.' 
    dc101 does not exist anymore. I tried changing the Configuration Domain Controller by manually specify a domain controller but get the exact
    same error message and also gets an empty list when selecting the domain. Other administrators who logs into to the same server do not get this error message. 
    If I open the exchange management console on another exchange server, it works without problem. Is there a setting somewhere I need to change
    to point it to the correct domain controller using power shell?

    I fixed it for myself.
    Organization Configuration->Modify Configuration Domain Controller->select Use a default domain controller
     

  • Error: "client-error-request-value-too-long" when trying to add printer

    After installing the 10.4.9 Combo update, my HP 1350 All-in-One printer was not recognized. I reinstalled the driver, but now I can't add the printer. I get the error message "client-error-request-value-too-long" when trying to add the printer. Has anyone else experienced a similar problem.
    Thanks in advance

    Well, I tried all of that and I'm still getting the error message. I've also repaired disk permissions and run Disk Warrior. When I repaired disk permissions, many HP printer items showed up in the list.

  • The current user has insufficient permissions to perform this operation when trying to add Term stored managed navigation.

    Hi,
    i am getting this error "The current user has insufficient permissions to perform this operation." when trying to add the Term store managed navigation like the following screen shot. i am the Farm
    administrator and as well managed services account. also noticed, cannot delete the service application, saying you don't have enough permission to delete the db. but using this account i was able to do everything before in my environment. is anyone already
    face this kind of error, so what will be the way to resolve this?
    Appreciated!

    event though its a farm admin,It should provide the access to MMS.please find the below link for more details and the solution for the issue.
    Go to SharePoint Central Administration Site –> Application Management –> [Service Applications] –> Manage service applications
    2.   Highlight the Managed Metadata Service that your web application is associated with. (Do not click on the link, just click somewhere else on that row to highlight it)
    3.   Click on Permissions button in the ribbon area.
    4.   Add the application pool account used by your web application and give it  ‘full Access to Term Store’
    5.   Click OK.
    http://expertsharepoint.blogspot.de/2014/08/managed-metadata-service-or-connection.html
    Anil Avula[MCP,MCSE,MCSA,MCTS,MCITP,MCSM] See Me At: http://expertsharepoint.blogspot.de/

  • Ora 12154 error when trying to add a database to VS Server Explorer

    Hi Everyone,
    I get the Ora 12154 error when trying to add a database to VS Server Explorer.
    How do I get around this problem.
    The database service is running and I can connect to the database with pl/sql.
    I can also tnsping the database and that is also ok.
    Looks like a problem with the odp.net software.
    I am running the 32 bit Oracle 11g on a Windows7 Home Premium 64 bit PC.
    I am new to this stuff so please help me step by step.
    Thanks.
    Emad

    Hi J. B.
    I have a question related to this. After you told me about the //host:1521/database alias I tried it in a VB 2008 program and it worked and returned data. At least I know that it can be used in a VB program without issues. I just now need to be able to add a connection with the Server Explorer.
    Anyway here is the VB coding I used. I'm new to this and still learning:
    Imports Oracle.DataAccess.Client ' Visual Basic ODP.NET Oracle managed provider
    Public Class Form1
    ' String to connect to the database.
    Dim strConnectionString As String = _
    "Data Source=//emad-pc:1521/emadeva;User ID=scott;Password=tiger;" '
    ' Associate the connection string with a connection object.
    Dim objOracleConnection As New OracleConnection(strConnectionString)
    ' SQL query for returning data rows.
    Dim strSqlQuery As String = _
    "Select dname, deptno " & _
    "From dept " & _
    "Where deptno = 10" '
    ' Command object to make this query work.
    Dim objOracleCommand As New OracleCommand(strSqlQuery, objOracleConnection)
    Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
    ' Identify what type of command is being used.
    objOracleCommand.CommandType = CommandType.Text
    Try
    objOracleConnection.Open()
    ' Set up a Data Reader and load it with data.
    Dim objOracleDataReader As OracleDataReader = _
    objOracleCommand.ExecuteReader()
    objOracleDataReader.Read()
    ' Convert the department number to a string.
    lblDepartmentNumberFromOracle.Text = _
    CStr(objOracleDataReader.Item("deptno"))
    Catch ex As Exception
    MessageBox.Show(ex.Message, "Error")
    End Try
    End Sub
    End Class
    I still want to thank you for the help you are providing.
    Truly,
    Emad

  • FRM-40735 Error when trying to add an employee as key member for a project

    FRM-40735: ON Insert trigger raised unhandled exception ORA-06502 in PAXPREPR when trying to add an employee as key member for a project
    Tried generating FND log messages to see if it shows any error messages but it didn't show any specific error.

    Error ORA-06502 says PL/SQL: numeric or value error.
    The Error could be in the data already exist in the system for key members. If this Project was created using APIs, there are possibilities that some other character( i.e. next line chracter ) got entered in the column value which Form "PAXPREPR" is not able to fetch or update.
    You can query the key member data from back-end to check if any data corruption is there. you may require data-fix to correct that.
    AB

Maybe you are looking for