Bug in form action configuration: problem with multifield

I’ve created a new page in content/geometrixx-outdoors/en/ and added a form component (from the foundation components).
I configure the form’s start element with the action type ‘Mail’ and add a mail address in the Mailto field (xtype="multifield") in the action configuration area.
I save the configuration and see the start node in the JCR having a property ‘mailto’ with the specified value (as expected).
However, if I open the start element’s configuration dialog again and try to change the mail address (in Mailto) or add another mail address (in Mailto, CC or BCC), clicking the dialog’s OK button doesn’t close the dialog and save the values anymore.
Only after I removw a multifield element, I’m able to save the values by clicking the OK button.
(Tested with FF 11 and Chrome 18.)
I'de like to see this problem fixed.
Can I file this problem description as bug anywhere?

I forgott to mention that I've already installed CQ5.5.
Unfortunately, I see this bug not fixed yet.
Note: it's the multifield (xtype="multifield") that's bothering me.
This has nothing to do with the radio or checkbox field. There's no default selection possible.

Similar Messages

  • Configuration problem with external Western Digital My Book 2 TB drive

    How do I fix a configuration problem with my external Western Digital My Book 2 TB drive which used to both read and write. Something has happened so that the drive is now read only? There is 600 GB of data on the drive that I cannot lose, thus am very concerned about messing around with formatting the drive which is raid 1 and filled with data.

    may not like to hear, but I'd skip on MyBook cases, nice looking as they are.
    Get a 2nd drive case to recover to.
    http://www.macsales.com/firewire
    may need to play with the demo Data Rescue 3 from Prosoft
    Backup/recover before repair is usually in order
    never have one backup set. THREE sets of your data, minimum.
    3rd party disk maintenance and repair should be a must and given rather than rely solely on Apple Disk Utility.
    Data and system maintenance and recovery plan - should be like practice for sports, arts, military with practice and making sure you will know how and the tools you need - ahead of time
    Resetting USB/FW ports, try another if one won't work. When 10.6 came out there was a lot of grinding teeth with external drives not working or mounting.

  • Configuration problem with param or code problem

    Hi,
    Im new to this jsp. Currently, i have some some Q here. Im trying on the jsp-tutorial with
    <%@ taglib prefix="my"
    uri="./jsp2/jsp2-example-taglib.tld" %>
    <HEAD>
    <TITLE>Functions</TITLE>
    </HEAD>
    <BODY>
    <H3>Add Numbers</H3>
    <P>
    <FORM action="./compute.jsp" method="GET">
    X = <input type="text" name="x" value="${param["x"]}">
    <BR>
    Y = <input type="text" name="y" value="${param["y"]}">
    <input type="submit" value="Add Numbers">
    </FORM>
    <P>
    The sum is: ${my:add(param["x"],param["y"])}
    </BODY>
    </HTML>
    inside the text box it appear the text with ${param[[/i], may i know is it a configuration problem?
    Thx for reply

    Probably yes it is a configuration problem.
    You have a JSP2.0 container? (eg Tomcat 5)
    If your web.xml starts with this:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems,
    Inc.//DTD Web Application 2.3//EN"
    "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    Replace it with this
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee
    ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
    That should fix it.
    http://forum.java.sun.com/thread.jspa?threadID=629437&
    tstart=0Sorry,
    I already hav
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <web-app xmlns="http://java.sun.com/xml/ns/j2ee"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://java.sun.com/xml/ns/j2ee http://java.sun.com/xml/ns/j2ee/web-app_2_4.xsd"
    version="2.4">
    originaly.

  • Form-based authentication problem with weblogic

    Hi Everyone,
    The following problem related to form-based authentication
    was posted one week ago and no reponse. Can someone give it
    a shot? One more thing is added here. When I try it on J2EE
    server and do the same thing, I didn't encounter this error
    message, and I am redirected to the homeage.
    Thanks.
    -John
    I am using weblogic5.1 and RDBMSRealm as the security realm. I am having the following problem with the form-based authentication login mechanism. Does anyone have an idea what the problem is and how to solve it?
    When I login my application and logout as normal procedure, it is OK. But if I login and use the browser's BACK button to back the login page and try to login as a new user, I got the following error message,
    "Form based authentication failed. Could not find session."
    When I check the LOG file, it gives me the following message,
    "Form based authentication failed. One of the following reasons could cause it: HTTP sessions are disabled. An old session ID was stored in the browser."
    Normally, if you login and want to relogin without logout first, it supposes to direct you to the existing user session. But I don't understand why it gave me this error. I also checked my property file, it appears that the HTTP sessions are enabled as follows,
    weblogic.httpd.session.enable=true

    Hi...
    Hehe... I actually did implement the way you implement it. My login.jsp actually checks if the user is authenticated. If yes, then it will forward it to the home page. On the other hand, I used ServletAuthentication to solve the problem mentioned by Cameron where Form Authentication Failed usually occurs for the first login attempt. I'm also getting this error occasionally. Using ServletAuthentication totally eliminates the occurence of this problem.
    I'm not using j_security_check anymore. ServletAuthentication does all the works. It also uses RDBMSRealm to authenticate the user. I think the biggest disadvantage I can see when using ServletAuthentication is that the requested resource will not be returned after authentication cause the page returned after authenticating the user is actually hard coded (for my case, it's the home.jsp)
    cheers...
    Jerson
    "John Wang" <[email protected]> wrote:
    >
    Hi Jerson,
    I tried your code this weekend, it didn't work in my case. But
    I solved my specific problem other way. The idea behind my problem is that the user tries to relogin when he already logs in. Therefore, I just redirect the user into another page when he is getting the login page by htting the BACK button, rather than reauthenticate the user as the way you did.
    But, I think your idea is very helpful if it could work. Problems such multiple concurrence logins can be solved by pre-processing.
    In your new code, you solved the problem with a new approach. I am just wondering, do you still implement it with your login.jsp file? In other word, your action in login.jsp is still "Authenticate"? Where do you put the URL "j_security_check"?
    Thanks.
    -John
    "Jerson Chua" <[email protected]> wrote:
    I've solved the problem by using ServletAuthentication. So far I'm not getting the error message. One of the side effects is that it doesn't return the requested URI after authentication, it will always return the home page.
    Jerson
    package com.cyberj.catalyst.web;
    import weblogic.servlet.security.*;
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    public class Authenticate extends HttpServlet {
    private ServletAuthentication sa = new ServletAuthentication("j_username", "j_password");
    public void doPost(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, java.io.IOException {
    int authenticated = sa.weak(request, response);
    if (authenticated == ServletAuthentication.NEEDS_CREDENTIALS ||
    authenticated == ServletAuthentication.FAILED_AUTHENTICATION) {
    response.sendRedirect("fail_login.jsp");
    } else {
    response.sendRedirect("Home.jsp");
    public void doGet(HttpServletRequest request, HttpServletResponse response)
    throws ServletException, java.io.IOException {
    doPost(request, response);
    "Jerson Chua" <[email protected]> wrote:
    The problem is still there even if I use page redirection. Grrr... My boss wants me to solve this problem so what are the alternatives I can do? Are there any other ways of authenticating the user? In my web tier... I'm using isUserInRole, getRemoteUser and the web tier actually connects to EJBs. If I implement my custom authentication, I wouldn't be able to use this functionalities.
    Has anyone solved this problem? I've tried the example itself and the same problem occurs.
    Jerson
    "Cameron Purdy" <[email protected]> wrote:
    Jerson,
    First try it redirected (raw) to see if that indeed is the problem ... then
    if it works you can "fix" it the way you want.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    +1.617.623.5782
    WebLogic Consulting Available
    "Jerson Chua" <[email protected]> wrote in message
    news:[email protected]...
    Hi...
    Thanks for your suggestion... I've actually thought of that solution. Butusing page redirection will expose the user's password. I'm thinking of
    another indirection where I will redirect it to another servlet but the
    password is encrypted.
    What do you think?
    thanks....
    Jerson
    "Cameron Purdy" <[email protected]> wrote:
    Maybe redirect to the current URL after killing the session to let the
    request clean itself up. I don't think that a lot of the request (such
    as
    remote user) will be affected by killing the session until the nextrequest
    comes in.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    +1.617.623.5782
    WebLogic Consulting Available
    "Jerson Chua" <[email protected]> wrote in message
    news:[email protected]...
    Hello guys...
    I've a solution but it doesn't work yet so I need your help. Because
    one
    of the reason for getting form base authentication failed is if an
    authenticated user tries to login again. For example, the one mentionedby
    John using the back button to go to the login page and when the user logsin
    again, this error occurs.
    So here's my solution
    Instead of submitting the page to j_security_check, submit it to a
    servlet
    which will check if the user is logged in or not. If yes, invalidates its
    session and forward it to j_security_check. But there's a problem in this
    solution, eventhough the session.invalidate() (which actually logs theuser
    out) is executed before forwarded to j_security_check, the user doesn't
    immediately logged out. How did I know this, because after calling
    session.invalidate, i tried calling request.RemoteUser() and it doesn't
    return null. So I'm still getting the error. What I want to ask you guyis
    how do I force logout before the j_security_check is called.
    here's the code I did which the login.jsp actually submits to
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.io.*;
    public class Authenticate extends HttpServlet {
    public void doPost(HttpServletRequest request, HttpServletResponseresponse)
    throws ServletException, java.io.IOException {
    if (request.getRemoteUser() != null) {
    HttpSession session = request.getSession(false);
    System.out.println(session.isNew());
    session.invalidate();
    Cookie[] cookies = request.getCookies();
    for (int i = 0; i < cookies.length; i++) {
    cookies.setMaxAge(0);
    getServletContext().getRequestDispatcher("/j_security_check").forward(reques
    t, response);
    public void doGet(HttpServletRequest request, HttpServletResponseresponse)
    throws ServletException, java.io.IOException {
    doPost(request, response);
    let's help each other to solve this problem. thanks.
    Jerson
    "Jerson Chua" <[email protected]> wrote:
    I thought that this problem will be solved on sp6 but to my
    disappointment, the problem is still there. I'm also using RDBMSRealm,same
    as John.
    Jerson
    "Cameron Purdy" <[email protected]> wrote:
    John,
    1. You are using a single WL instance (i.e. not clustered) on that
    NT
    box
    and doing so without a proxy (e.g. specifying http://localhost:7001),
    correct?
    2. BEA will pay more attention to the problem if you upgrade to SP6.If
    you don't have a reason NOT to (e.g. a particular regression), then
    you
    should upgrade. That will save you one go-around with support: "Hi,I
    am
    on SP5 and I have a problem.", "Upgrade to SP6 to see if that fixes
    it.
    Call back if that doesn't work."
    3. Make sure that you are not doing anything special before or after
    J_SECURITY_CHECK ... make sure that you have everything configuredand
    done
    by the book.
    4. Email BEA a bug report at [email protected] ... see what they say.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    +1.617.623.5782
    WebLogic Consulting Available
    "John Wang" <[email protected]> wrote in message
    news:[email protected]...
    Cameron,
    It seems to me that the problem I encountered is different a little
    from
    what you have, evrn though the error message is the same eventually.
    Everytime I go through, I always get that error.
    I am using weblogic5.1 and sp5 on NT4.0. Do you have any solutions
    to
    work
    around this problem? If it was a BUG as you
    pointed out, is there a way we can report it to the Weblogic
    technical support and let them take a look?
    Thnaks.
    -John
    "Cameron Purdy" <[email protected]> wrote:
    John,
    I will verify that I have seen this error now (after having read
    about it
    here for a few months) and it had the following characteristics:
    1) It was intermittent, and appeared to be self-curing
    2) It was not predictable, only seemed to occur at the first
    login
    attempt,
    and may have been timing related
    3) This was on Sun Solaris on a cluster of 2 Sparc 2xx's; the
    proxy
    was
    Apache (Stronghold)
    4) After researching the newsgroups, it appears that this "bug"
    may
    have gone away temporarily (?) in SP5 (although Jerson Chua
    <[email protected]> mentioned that he still got it in SP5)
    I was able to reproduce it most often by deleting the tmpwar and
    tmp_deployments directories while the cluster was not running,
    then
    restarting the cluster. The first login attempt would fail(roughly
    90%
    of
    the time?) and that server instance would then be ignored by the
    proxy
    for a
    while (60 seconds?) -- meaning that the proxy would send all
    traffic,
    regardless of the number of "clients", to the other server in thecluster.
    As far as I can tell, it is a bug in WebLogic, and probably has
    been
    there
    for quite a while.
    Peace,
    Cameron Purdy
    Tangosol, Inc.
    http://www.tangosol.com
    +1.617.623.5782
    WebLogic Consulting Available
    "John Wang" <[email protected]> wrote in message
    news:[email protected]...
    Hi Everyone,
    The following problem related to form-based authentication
    was posted one week ago and no reponse. Can someone give it
    a shot? One more thing is added here. When I try it on J2EE
    server and do the same thing, I didn't encounter this error
    message, and I am redirected to the homeage.
    Thanks.
    -John
    I am using weblogic5.1 and RDBMSRealm as the security realm. I
    am
    having
    the following problem with the form-based authentication login
    mechanism.
    Does anyone have an idea what the problem is and how to solve it?
    When I login my application and logout as normal procedure, it
    is
    OK.
    But
    if I login and use the browser's BACK button to back the login
    page
    and
    try
    to login as a new user, I got the following error message,
    "Form based authentication failed. Could not find session."
    When I check the LOG file, it gives me the following message,
    "Form based authentication failed. One of the following reasons
    could
    cause it: HTTP sessions are disabled. An old session ID was stored
    in
    the
    browser."
    Normally, if you login and want to relogin without logout first,
    it
    supposes to direct you to the existing user session. But I don'tunderstand
    why it gave me this error. I also checked my property file, it
    appears
    that
    the HTTP sessions are enabled as follows,
    weblogic.httpd.session.enable=true

  • Datasource Configuration problem with Tomcat-4.0.3

    Hi All !
    When I trying to open connection to my DB2 database in tomcat -4.0.3,
    I have put db2java.jar in /usr/local/jakartha-tomcat-4.03/common/lib directory
    when I am trying to connect Database through my servlet getting expections
    java.lang.NullPointerException: at DataSource ds = (DataSource)envContext.lookup("jdbc/SmsDBDS");
    here is my dbconnection class
    package com.ebizon.util.jdbc;
    import java.sql.*;
    import java.util.*;
    import javax.naming.*;
    import javax.sql.*;
    public class DBUtil {
    /* Ebizon DB Connection for Tomcat */
    public static Connection getEbizDBConnection() throws NamingException, SQLException {
    Connection conn = null;
    try {
    InitialContext initCtx = new InitialContext();
    Context envContext = (Context)initContext.lookup("java:/comp/env");
    DataSource ds = (DataSource)envContext.lookup("jdbc/SmsDBDS");
    conn = ds.getConnection();
    } catch (NamingException ne) {
    throw ne;
    } catch (SQLException se) {
    throw se;
    return conn;
    And my resource definition in server.xml (/usr/local/jakartha-tomcat-4.0.3/conf/server.xml)
    <Context path="/DBTest" docBase="DBTest"
    debug="5" reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_DBTest_log." suffix=".txt"
    timestamp="true"/>
    <Resource name="jdbc/SmsDBDS"
    auth="Container"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/SmsDBDS">
    <parameter>
    <name>factory</name>
    <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>100</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>30</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>10000</value>
    </parameter>
    <!-- DB2 dB username and password for dB connections -->
    <parameter>
    <name>username</name>
    <value>smsdb</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>smsdb</value>
    </parameter>
    <!-- Class name for mm.mysql JDBC driver -->
    <parameter>
    <name>driverClassName</name>
    <value>COM.ibm.db2.jdbc.app.DB2Driver</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:db2:smsdb</value>
    </parameter>
    </ResourceParams>
    </Context>
    this is my Web Application descriptor /WEB-INF/web.xml
    <resource-ref>
    <description>
    Resource reference to a factory for java.sql.Connection
    instances that may be used for talking to a particular
    database that is configured in the server.xml file.
    </description>
    <res-ref-name>
    jdbc/EmployeDB
    </res-ref-name>
    <res-type>
    javax.sql.DataSource
    </res-type>
    <res-auth>
    Container
    </res-auth>
    </resource-ref>
    Please look at once above , Do i missing any thing?
    Anyhelp is greatly appreciate
    Many thanks in advance
    With Regards
    Madhu Reddy

    I don't see any problem with your files, so unfortunately I can't help. Since this forum is about the J2EE SDK, people may not have that much experience with standalone Tomcat. You may want to try the Tomcat user mailing list for a question about Tomcat: http://jakarta.apache.org/site/mail2.html

  • Forms/Designer 10g - problem with attached libraries

    I've problem with forms with attached libraries. All of libraries have removed paths. I can run all forms without any problem on my local application server from Forms Builder 9i or Designer 9i. I added all paths in registry FORMS90_PATH. WORKINGDIRECTORY in formsweb.cfg is blank.
    Unfortunately I can't do it with Developer 10g on second workstation. I added all paths in registry FORMS_PATH. WORKINGDIRECTORY in formsweb.cfg is blank too. When form is running I get ORA-06508. I can't store all files (fmb, fmx, pll, plx etc.) in one folder because I've to use CVS. In this case I can't set any folder in WORKINGDIRECTORY.

    Assuming Forms 10.1.2.x, FMX, MMX, PLX, and OLB files are found based on the value of FORMS_PATH which is set in default.env and not the Registry. This applies to runtime only. The Builder uses the Registry.
    Understand that "runtime" refers to any time a form is displayed in a browser, regardless of whether is was started from the Builder or Application Server.
    Also, be aware that if you have FMX, MMX, or PLX files which were created in older versions they must be recompiled using the 10.1.2 compiler.

  • J2ee agent 2.2 configuration problem with Websphere Portal 5.1

    Hi,
    I am trying to configure j2ee agent 2.2 with Websphere Portal server.
    I have followed the document "Sun Java SystemAccess Manager
    PolicyAgent 2.2 Guide for IBM WebSphere Portal Server 5.1.0.2"
    Please see the thread "Problem with Sun's SSO system and Websphere Portal Server integration" for environment related information.
    Also the security on app server has been enabled and is talking to LDAP.
    My aim here is to enable application server (portal server) to autheticate requests.
    I am getting following error when I log into the portal application.
    07/03/2007 06:32:16:062 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    AmFilter: now processing: SSO Task Handler
    07/03/2007 06:32:16:062 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    SSOTaskHandler: SSO Validation failed for null
    07/03/2007 06:32:16:062 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    URLFailoverHelper: Checking if https://apollo.maxnewyorklife.com:443/amserver/UI/Login is available
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    WARNING: URLFailoverHelper: the url https://apollo.maxnewyorklife.com:443/amserver/UI/Login is not available
    javax.net.ssl.SSLHandshakeException: unknown certificate
         at com.ibm.jsse.bs.a(Unknown Source)
         at com.ibm.jsse.bs.startHandshake(Unknown Source)
         at com.ibm.net.ssl.www.protocol.https.b.o(Unknown Source)
         at com.ibm.net.ssl.www.protocol.https.q.connect(Unknown Source)
         at com.ibm.net.ssl.internal.www.protocol.https.HttpsURLConnection.connect(Unknown Source)
         at com.sun.identity.agents.common.URLFailoverHelper.isAvailable(URLFailoverHelper.java:190)
         at com.sun.identity.agents.common.URLFailoverHelper.getAvailableURL(URLFailoverHelper.java:129)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getLoginURL(AmFilterRequestContext.java:757)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:285)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:258)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:363)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:345)
         at com.sun.identity.agents.filter.SSOTaskHandler.doSSOLogin(SSOTaskHandler.java:210)
         at com.sun.identity.agents.filter.SSOTaskHandler.process(SSOTaskHandler.java:98)
         at com.sun.identity.agents.filter.AmFilter.processTaskHandlers(AmFilter.java:189)
         at com.sun.identity.agents.filter.AmFilter.isAccessAllowed(AmFilter.java:152)
         at com.sun.identity.agents.websphere.AmIdentityAsserterBase.processRequest(AmIdentityAsserterBase.java:195)
         at com.sun.identity.agents.websphere.AmTrustAssociationInterceptor.negotiateValidateandEstablishTrust(AmTrustAssociationInterceptor.java:91)
         at com.ibm.ws.security.web.TAIWrapper.negotiateAndValidateEstablishedTrust(TAIWrapper.java:101)
         at com.ibm.ws.security.web.WebAuthenticator.handleTrustAssociation(WebAuthenticator.java:191)
         at com.ibm.ws.security.web.WebAuthenticator.authenticate(WebAuthenticator.java:928)
         at com.ibm.ws.security.web.WebCollaborator.authorize(WebCollaborator.java:531)
         at com.ibm.ws.security.web.EJSWebCollaborator.preInvoke(EJSWebCollaborator.java:262)
         at com.ibm.ws.webcontainer.webapp.WebAppSecurityCollaborator.preInvoke(WebAppSecurityCollaborator.java:132)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:506)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
         at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
         at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
         at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
         at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
         at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
         at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    URLFailoverHelper: disconnected the connection for availability check
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    ERROR: URLFailoverHelper: No URL is available at this time
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    ERROR: AmFilter: Error while delegating to inbound handler: SSO Task Handler, access will be denied
    [AgentException Stack]
    com.sun.identity.agents.arch.AgentException: No URL is available at this time
         at com.sun.identity.agents.common.URLFailoverHelper.getAvailableURL(URLFailoverHelper.java:133)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getLoginURL(AmFilterRequestContext.java:757)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:285)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:258)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:363)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:345)
         at com.sun.identity.agents.filter.SSOTaskHandler.doSSOLogin(SSOTaskHandler.java:210)
         at com.sun.identity.agents.filter.SSOTaskHandler.process(SSOTaskHandler.java:98)
         at com.sun.identity.agents.filter.AmFilter.processTaskHandlers(AmFilter.java:189)
         at com.sun.identity.agents.filter.AmFilter.isAccessAllowed(AmFilter.java:152)
         at com.sun.identity.agents.websphere.AmIdentityAsserterBase.processRequest(AmIdentityAsserterBase.java:195)
         at com.sun.identity.agents.websphere.AmTrustAssociationInterceptor.negotiateValidateandEstablishTrust(AmTrustAssociationInterceptor.java:91)
         at com.ibm.ws.security.web.TAIWrapper.negotiateAndValidateEstablishedTrust(TAIWrapper.java:101)
         at com.ibm.ws.security.web.WebAuthenticator.handleTrustAssociation(WebAuthenticator.java:191)
         at com.ibm.ws.security.web.WebAuthenticator.authenticate(WebAuthenticator.java:928)
         at com.ibm.ws.security.web.WebCollaborator.authorize(WebCollaborator.java:531)
         at com.ibm.ws.security.web.EJSWebCollaborator.preInvoke(EJSWebCollaborator.java:262)
         at com.ibm.ws.webcontainer.webapp.WebAppSecurityCollaborator.preInvoke(WebAppSecurityCollaborator.java:132)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:506)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
         at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
         at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
         at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
         at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
         at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
         at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    AmFilter: result =>
    FilterResult:
         Status      : FORBIDDEN
         RedirectURL     : null
         RequestHelper:
              null
         Data:
              null
    07/03/2007 06:32:16:078 PM IST: Thread[Servlet.Engine.Transports : 1,5,main]
    AmIdentityAsserter: result => TAIResult: status: 403, principal: null, subject: null
    From whatever analysis I have done so far, I believe this issue is related to the personal certificate for sun one webserver (on which access manager & LDAP are installed) not registered with the application server (portal server).
    I am not sure about the way I go by solving the issue.
    Please can anybody help me out.
    Thanks,
    Yaseer
    Message was edited by:
    yazee
    Message was edited by:
    yazee

    Ankush,
    I am getting error as follows in the webserver error log:-
    Error receiving request from 172.23.213.75 (SSL_ERROR_CERTIFICATE_UNKNOWN_ALERT: SSL peer had some unspecified issue with the certificate it received)
    Although I can get into am console but with https://apollo.maxnewyorklife.com/amconsole
    Tried the same thing, but couldnt resolve it. I will give it another go.
    Generally I am getting same error again and again.
    In my amWebsphere log file of j2ee agent (under root\am_wps_agent\agent_001\logs\debug) error I get.....
    07/15/2007 04:19:11:656 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    AmFilter: now processing: SSO Task Handler
    07/15/2007 04:19:11:766 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    SSOTokenValidator.validate(): Exception caught
    com.iplanet.sso.SSOException: Invalid sessionid formatjava.lang.IllegalArgumentException: Invalid server id in session id com.iplanet.services.naming.ServerEntryNotFoundException: Naming Service is not available.
         at com.iplanet.sso.providers.dpro.SSOProviderImpl.createSSOToken(SSOProviderImpl.java:205)
         at com.iplanet.sso.SSOTokenManager.createSSOToken(SSOTokenManager.java:325)
         at com.sun.identity.agents.common.SSOTokenValidator.validateInternal(SSOTokenValidator.java:252)
         at com.sun.identity.agents.common.SSOTokenValidator.validate(SSOTokenValidator.java:157)
         at com.sun.identity.agents.filter.SSOTaskHandler.process(SSOTaskHandler.java:88)
         at com.sun.identity.agents.filter.AmFilter.processTaskHandlers(AmFilter.java:189)
         at com.sun.identity.agents.filter.AmFilter.isAccessAllowed(AmFilter.java:152)
         at com.sun.identity.agents.websphere.AmIdentityAsserterBase.processRequest(AmIdentityAsserterBase.java:195)
         at com.sun.identity.agents.websphere.AmTrustAssociationInterceptor.negotiateValidateandEstablishTrust(AmTrustAssociationInterceptor.java:91)
         at com.ibm.ws.security.web.TAIWrapper.negotiateAndValidateEstablishedTrust(TAIWrapper.java:101)
         at com.ibm.ws.security.web.WebAuthenticator.handleTrustAssociation(WebAuthenticator.java:191)
         at com.ibm.ws.security.web.WebAuthenticator.authenticate(WebAuthenticator.java:928)
         at com.ibm.ws.security.web.WebCollaborator.authorize(WebCollaborator.java:531)
         at com.ibm.ws.security.web.EJSWebCollaborator.preInvoke(EJSWebCollaborator.java:262)
         at com.ibm.ws.webcontainer.webapp.WebAppSecurityCollaborator.preInvoke(WebAppSecurityCollaborator.java:132)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:506)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
         at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
         at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
         at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
         at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
         at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
         at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)
    07/15/2007 04:19:11:766 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    SSOTaskHandler: SSO Validation failed for AQIC5wM2LY4SfcwoaNKFd01DvjYeNPbR3wXaa9sMVjcKtwo=@AAJTSQACMDE=#
    07/15/2007 04:19:11:766 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    URLFailoverHelper: Checking if https://apollo.maxnewyorklife.com:443/amserver/UI/Login is available
    07/15/2007 04:19:11:797 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    WARNING: URLFailoverHelper: the url https://apollo.maxnewyorklife.com:443/amserver/UI/Login is not available
    javax.net.ssl.SSLHandshakeException: com.ibm.jsse2.util.g: No trusted certificate found
         at com.ibm.jsse2.bw.a(Unknown Source)
         at com.ibm.jsse2.bx.a(Unknown Source)
         at com.ibm.jsse2.bx.a(Unknown Source)
         at com.ibm.jsse2.v.a(Unknown Source)
         at com.ibm.jsse2.v.a(Unknown Source)
         at com.ibm.jsse2.u.a(Unknown Source)
         at com.ibm.jsse2.bx.a(Unknown Source)
         at com.ibm.jsse2.bx.l(Unknown Source)
         at com.ibm.jsse2.bx.startHandshake(Unknown Source)
         at com.ibm.net.ssl.www.protocol.https.b.o(Unknown Source)
         at com.ibm.net.ssl.www.protocol.https.q.connect(Unknown Source)
         at com.ibm.net.ssl.internal.www.protocol.https.HttpsURLConnection.connect(Unknown Source)
         at com.sun.identity.agents.common.URLFailoverHelper.isAvailable(URLFailoverHelper.java:190)
         at com.sun.identity.agents.common.URLFailoverHelper.getAvailableURL(URLFailoverHelper.java:129)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getLoginURL(AmFilterRequestContext.java:757)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:285)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:258)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:363)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:345)
         at com.sun.identity.agents.filter.SSOTaskHandler.doSSOLogin(SSOTaskHandler.java:210)
         at com.sun.identity.agents.filter.SSOTaskHandler.process(SSOTaskHandler.java:98)
         at com.sun.identity.agents.filter.AmFilter.processTaskHandlers(AmFilter.java:189)
         at com.sun.identity.agents.filter.AmFilter.isAccessAllowed(AmFilter.java:152)
         at com.sun.identity.agents.websphere.AmIdentityAsserterBase.processRequest(AmIdentityAsserterBase.java:195)
         at com.sun.identity.agents.websphere.AmTrustAssociationInterceptor.negotiateValidateandEstablishTrust(AmTrustAssociationInterceptor.java:91)
         at com.ibm.ws.security.web.TAIWrapper.negotiateAndValidateEstablishedTrust(TAIWrapper.java:101)
         at com.ibm.ws.security.web.WebAuthenticator.handleTrustAssociation(WebAuthenticator.java:191)
         at com.ibm.ws.security.web.WebAuthenticator.authenticate(WebAuthenticator.java:928)
         at com.ibm.ws.security.web.WebCollaborator.authorize(WebCollaborator.java:531)
         at com.ibm.ws.security.web.EJSWebCollaborator.preInvoke(EJSWebCollaborator.java:262)
         at com.ibm.ws.webcontainer.webapp.WebAppSecurityCollaborator.preInvoke(WebAppSecurityCollaborator.java:132)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:506)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
         at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
         at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
         at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
         at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
         at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
         at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)
    Caused by: com.ibm.jsse2.util.g: No trusted certificate found
         at com.ibm.jsse2.util.f.b(Unknown Source)
         at com.ibm.jsse2.util.f.b(Unknown Source)
         at com.ibm.jsse2.util.d.a(Unknown Source)
         at com.ibm.jsse2.bn.checkServerTrusted(Unknown Source)
         at com.ibm.jsse2.z.checkServerTrusted(Unknown Source)
         ... 39 more
    07/15/2007 04:19:11:797 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    URLFailoverHelper: disconnected the connection for availability check
    07/15/2007 04:19:11:797 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    ERROR: URLFailoverHelper: No URL is available at this time
    07/15/2007 04:19:11:797 PM IST: Thread[Servlet.Engine.Transports : 0,5,main]
    ERROR: AmFilter: Error while delegating to inbound handler: SSO Task Handler, access will be denied
    [AgentException Stack]
    com.sun.identity.agents.arch.AgentException: No URL is available at this time
         at com.sun.identity.agents.common.URLFailoverHelper.getAvailableURL(URLFailoverHelper.java:133)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getLoginURL(AmFilterRequestContext.java:757)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:285)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectURL(AmFilterRequestContext.java:258)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:363)
         at com.sun.identity.agents.filter.AmFilterRequestContext.getAuthRedirectResult(AmFilterRequestContext.java:345)
         at com.sun.identity.agents.filter.SSOTaskHandler.doSSOLogin(SSOTaskHandler.java:210)
         at com.sun.identity.agents.filter.SSOTaskHandler.process(SSOTaskHandler.java:98)
         at com.sun.identity.agents.filter.AmFilter.processTaskHandlers(AmFilter.java:189)
         at com.sun.identity.agents.filter.AmFilter.isAccessAllowed(AmFilter.java:152)
         at com.sun.identity.agents.websphere.AmIdentityAsserterBase.processRequest(AmIdentityAsserterBase.java:195)
         at com.sun.identity.agents.websphere.AmTrustAssociationInterceptor.negotiateValidateandEstablishTrust(AmTrustAssociationInterceptor.java:91)
         at com.ibm.ws.security.web.TAIWrapper.negotiateAndValidateEstablishedTrust(TAIWrapper.java:101)
         at com.ibm.ws.security.web.WebAuthenticator.handleTrustAssociation(WebAuthenticator.java:191)
         at com.ibm.ws.security.web.WebAuthenticator.authenticate(WebAuthenticator.java:928)
         at com.ibm.ws.security.web.WebCollaborator.authorize(WebCollaborator.java:531)
         at com.ibm.ws.security.web.EJSWebCollaborator.preInvoke(EJSWebCollaborator.java:262)
         at com.ibm.ws.webcontainer.webapp.WebAppSecurityCollaborator.preInvoke(WebAppSecurityCollaborator.java:132)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.dispatch(WebAppRequestDispatcher.java:506)
         at com.ibm.ws.webcontainer.webapp.WebAppRequestDispatcher.forward(WebAppRequestDispatcher.java:208)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.doForward(WebAppInvoker.java:134)
         at com.ibm.ws.webcontainer.srt.WebAppInvoker.handleInvocationHook(WebAppInvoker.java:321)
         at com.ibm.ws.webcontainer.cache.invocation.CachedInvocation.handleInvocation(CachedInvocation.java:71)
         at com.ibm.ws.webcontainer.srp.ServletRequestProcessor.dispatchByURI(ServletRequestProcessor.java:246)
         at com.ibm.ws.webcontainer.oselistener.OSEListenerDispatcher.service(OSEListener.java:334)
         at com.ibm.ws.webcontainer.http.HttpConnection.handleRequest(HttpConnection.java:56)
         at com.ibm.ws.http.HttpConnection.readAndHandleRequest(HttpConnection.java:652)
         at com.ibm.ws.http.HttpConnection.run(HttpConnection.java:448)
         at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:936)
    Thanks,
    Yaseer

  • A lot of bug in ios 7 and problem with the iphone

    There is a problem with ios 7 when I delete history with my iphone 4s ...and only one month after that I've buy my iphone appared a problem with the wi-fi!!!!!!

    Try https://discussions.apple.com/message/23175298#23175298
    Allan

  • Configuration problem with a client proxy

    Hi,
    Each time I try to create a stateless proxy (associated to a stateless web service), SAP raise the same problem when he execute :
    create object rfc_proxy.
    When I debug the code, I find that the proxy configuration is wrong.
    In CL_SRT_LP_MAINTENANCE~READ_LP_CONFIG, it reads the proxy's configuration from the table srt_lp_feat and does a test (IF) which provokes my problem.
    method read_lp_config.
      select * from srt_lp_feat into ls_lp_feat
               where proxyclass = proxyclass
                 and lp_name    = lp_name
                 and active     = 'A'.
        ls_cfg-feature  = ls_lp_feat-feature.
        ls_cfg-property = ls_lp_feat-property.
        ls_cfg-value    = ls_lp_feat-value.
        if not ls_cfg-value is initial or ls_cfg-property is initial.
          append ls_cfg to lt_cfg.
        endif.
      endselect.
    This function returns a table with the proxy's configuration. Here is the table header :
    <i>FEATURE | PROPERTY | VALUE | USE_DEFAULT</i>
    And for one line (<i>FEATURE</i> = http://www.sap.com/webas/630/soap/features/transportguarantee/), I found that the property and value field are "initial".
    Can it normally happen ?
    I have made some other test to understand the priority of NOT in the IF statement.
    Test 1 :
    if not lp_feat-value is initial or lp_feat-property is initial.
    Test 2 :
    if not ( lp_feat-value is initial or lp_feat-property is initial ).
    Test 3 :
    if lp_feat-value is not initial and lp_feat-property is not initial.
    The test 2 and 3 returns the same good result where the test 1 returns line where the property field is "initial".
    So, am I wrong or the method <i>read_lp_config</i> seems to have a bug ?
    Regards,
    Gautier

    Calin wrote:
    out.flushdo the thing! But i don`t get it why? I have to use "flush" after each time i use out (DataOutputStream) ?
    Thanks!The output stream has a buffer and isn't directly writing the data to the socket. Calling flush forces a write.
    Kaj

  • Hyperion planning data form in smartview: problem with summary time period

    We are using Planning ver. 11.1.2.2.300.20 and smartview 11.1.2.2.300 (build 070)
    We use common Data Form:
    In columns: Periods (Descendants including YearTotal - with no checkbox on start expanded)
    In Rows :accounts
    In some of our users computers,
    When they open Data Form in Excel (with Smart View) - its appears very strange:
    Summary Accounts are displayed as level 0 account in the summary Period columns (i.e. not in grey) and permit entering data.
    In addition when Entering data in summary time period (i.e. Year or Quarter),
    strangely,  the data doesn't  spread to the descendants months (level 0) .
    This phenomenon occurs just in few of the computers.
    Please help, how can we overcome this problem?
    Thanks and Regards
    Tami Kedem

    Hi Celvin,
    Thanks for your rapid response!
    All computers have the same version of planning and smartview.
    The computers where the Periods spreading and aggregation properties in Data form are not working,
    do work wonderfully when opening the Data forms in the web.
    I've tried everything, (remove suppressing, validations etc.):
    In all kind of data forms the spreading and aggregation properties on summary time periods are not working in smartview -
    and summary accounts on rows are not displayed in grey and permit entering data.
    We remove and reinstall MS-Office (2007) from the problematic computers, but it didn't help.
    Do you know if there is any kind of settings or softwares that might cause this phenomenon
    i.e. interrupts the smartview translation of the web Data Forms.
    Thank and best regards,
    Tami Kedem

  • Airport extreme configuration problem with Netgear DG834PN

    Good morning,
    I have a problem. I bought an AEBS via the WAN port to connect to my Netgear DG834PN.
    I turned off the WiFi on the Netgear, I connected the AEBS in bridge mode, but with the iMac and other iDevice there are no problems.
    On the contrary my Acer Travelmate (Win 7) does not want to connect ... fact is connected, the card tells me that is connected and has access to the internet, but does not show mewhen I browse any web page, Skype does not connect ...
    Do you have suggestions for configuring the Netgear or dell'AEBS?

    The Windows Firewall may be blocking the connection attempt. I have not used Windows 7, but on an XP machine, the Firewall settings are in the Control Panel. Check to see if this might be the case so you can "Allow" an "Exception".
    The anti-virus software may also be blocking the connection. You may need to turn it off for the configuration, then turn it back on.
    It will often help to try to configure the device using Ethernet, not wireless. Connect a spare Ethernet cable from your PC to one of the LAN <-> ports on the AirPort Extreme. Restart both the PC and AirPort Extreme, then open AirPort Utility again.
    If still no luck, click the AirPort Utility File menu at the upper left hand corner of the screen and select Configure Other. Enter 10.0.1.1 into the address box and "public" (without the quotes) in the password box.

  • Configuration problem with Mac Mail/ATT

    Starting probably this morning, wireless on a PPC iMac was sluggish. Connections didn't finish. Connecting to an URL led to hanging connections.
    Well, contacting ATT (my ISP), we discovered that all three of our Macs have the same problem. No problem sending and receiving email through the Ethernet, but wireless was sluggish. ATT said that, since we're dealing with a Mac Mail issue, it would be $14.99 for help on the configuration.
    I don't know the new configuration, but I could change them - if I knew the settings. I'm hoping that someone has the information to save me some money. And if someone consults this discussion, they'll know the answer by looking at this thread.
    Does anybody know about changes in email configurations over the past few days?

    Nobody seemed to know the answer to this, so I had to look it up.
    Seems that the DNS settings were incorrect for some reason. I applied OpenDNS to each of the computers in our house, and everything works fine now. I love OpenDNS.

  • DB2 Configuration problem with Tomcat-4.0.3

    When I trying to open connection to my DB2 database in tomcat -4.0.3,
    I have put db2java.jar in /usr/local/jakartha-tomcat-4.03/common/lib directory
    when I am trying to connect Database through my servlet getting expections
    java.lang.NullPointerException: at DataSource ds = (DataSource)envContext.lookup("jdbc/SmsDBDS");
    here is my dbconnection class
    package com.ebizon.util.jdbc;
    import java.sql.*;
    import java.util.*;
    import javax.naming.*;
    import javax.sql.*;
    public class DBUtil {
    /* Ebizon DB Connection for Tomcat */
    public static Connection getEbizDBConnection() throws NamingException, SQLException {
    Connection conn = null;
    try {
    InitialContext initCtx = new InitialContext();
    Context envContext = (Context)initContext.lookup("java:/comp/env");
    DataSource ds = (DataSource)envContext.lookup("jdbc/SmsDBDS");
    conn = ds.getConnection();
    } catch (NamingException ne) {
    throw ne;
    } catch (SQLException se) {
    throw se;
    return conn;
    And my resource definition in server.xml (/usr/local/jakartha-tomcat-4.0.3/conf/server.xml)
    <Context path="/DBTest" docBase="DBTest"
    debug="5" reloadable="true" crossContext="true">
    <Logger className="org.apache.catalina.logger.FileLogger"
    prefix="localhost_DBTest_log." suffix=".txt"
    timestamp="true"/>
    <Resource name="jdbc/SmsDBDS"
    auth="Container"
    type="javax.sql.DataSource"/>
    <ResourceParams name="jdbc/SmsDBDS">
    <parameter>
    <name>factory</name>
    <value>org.apache.commons.dbcp.BasicDataSourceFactory</value>
    </parameter>
    <parameter>
    <name>maxActive</name>
    <value>100</value>
    </parameter>
    <parameter>
    <name>maxIdle</name>
    <value>30</value>
    </parameter>
    <parameter>
    <name>maxWait</name>
    <value>10000</value>
    </parameter>
    <!-- DB2 dB username and password for dB connections -->
    <parameter>
    <name>username</name>
    <value>smsdb</value>
    </parameter>
    <parameter>
    <name>password</name>
    <value>smsdb</value>
    </parameter>
    <!-- Class name for mm.mysql JDBC driver -->
    <parameter>
    <name>driverClassName</name>
    <value>COM.ibm.db2.jdbc.app.DB2Driver</value>
    </parameter>
    <parameter>
    <name>url</name>
    <value>jdbc:db2:smsdb</value>
    </parameter>
    </ResourceParams>
    </Context>
    this is my Web Application descriptor /WEB-INF/web.xml
    <resource-ref>
    <description>
    Resource reference to a factory for java.sql.Connection
    instances that may be used for talking to a particular
    database that is configured in the server.xml file.
    </description>
    <res-ref-name>
    jdbc/EmployeDB
    </res-ref-name>
    <res-type>
    javax.sql.DataSource
    </res-type>
    <res-auth>
    Container
    </res-auth>
    </resource-ref>
    Please look at once above , Do i missing any thing?
    Anyhelp is greatly appreciate
    Many thanks in advance
    With Regards
    Madhu Reddy

    Hi,
    I have same problem. But unfortunately there does not exist a solution.
    You can read the explanation of this topic at http://jakarta.apache.org/tomcat/tomcat-5.0-doc/jndi-datasource-examples-howto.html#Non%20DBCP%20Solutions
    Non DBCP Solutions. I understand Tomcat supports only MySQL, PostgreSQL, and Oracle 8i but not DB2.
    DataSource ds = (DataSource)envContext.lookup("jdbc/SmsDBDS");
    Up to now everything is fine, ds is not null, but inside ds (password, url, username...) all of them are null
    So when you execute conn = ds.getConnection(); there will be exception.
    If you find any solution please inform me.
    [email protected]

  • Forms Server configuring problem

    Hi,
    I've installed Oracle Forms Server 6i on Windows platform and installed Apache 2.2.
    The virtuals folders are configured correctly in Apache and file permission settings are all done correctly.
    All the environment variables appears to be okay in registry.
    When I try to test the Forms Server using runform.htm with the provided test.fmx,
    the form is not executed but the browser tries to download the file, which seems to be the renamed ifcgi60.exe file, by looking at the size of the file. (51.5kb)
    I tried using both socket and HTTP mode with same port number and they behaviours the same.
    Am I missing some configuration somewhere?
    Does anybody had similar experience like this?
    Please help.
    Thanks in advance.
    Edited by: user11202617 on May 26, 2009 2:49 PM

    Well, I think it is very important to mention that Forms/Reports 6i has been desupported for years. So, this probably isn't the best version to be using, both because Oracle will not offer much assistance any longer with that version and because that product version is based on old technology.
    That said, here are some things to consider:
    1. Apache 2.2 was never certified for use with Forms 6 and further more many issues were reported when attempts were made to use this version. Apache 1.3 is the recommended and previously supported version to be used with Forms 6.x
    2. ifcgi60.exe is not a renamed version of your form (i.e. test.fmx). It is the cgi module used to generate the needed html to send to the client and eventually start the jre which starts the form. (it's a little more complicated than that, but that is the basic process). If you are getting a download option when calling the cgi module, is likely means that you have not correctly configured Apache to run it.
    To the best of my knowledge, the only way to use your own web server (rather than using Oracle Application Server) was to call Forms apps using a static html file. I do not believe that there was any supported way in which you could use the Forms Servlet or CGI. It probably can be done but I don't think it was supported. To start with Apache must know where executables can be found, in other words the CGI (exe) file. Here is an example of what the directive in Apache would look like:
    ScriptAlias /dev60cgi/ "C:\ORACLE\806\tools\web60\cgi/"
    In the above example, you would need to ensure that the ifcgi60.exe was located in the directory shown above. In the url used to call the form (assuming you wanted to use cgi) you would include the /dev60cgi/... Of course the exact directory and virtual path name is up to you as long as you know how to correctly set everything else.
    Anyway.... I can go on and on. Configuring your own web server to work with Forms is not really recommended. Using Oracle Application Server 1.0.2 was the better way to do this back when it was still supported.
    If you plan on continuing down this path, I would recommend that you refer to both the Apache documentation and the Forms 6 documentation, which for now, is still available:
    http://www.oracle.com/technology/products/forms/techlisting.html

  • Bpm Studio configure problem with ubuntu( Linux)

    Hi,
    I have download the oracle bpm 10 g r3 form the oracle site its work fine but when i am try to make Presentation in our project Its give some error like.
    Error Typing to open browser please check installation guide to see if your environment is correctly configured.
    or
    XPCOM error -2147467259
    org.eclipse.swt.SWTError: XPCOM error -2147467259
         at org.eclipse.swt.browser.Mozilla.error(Mozilla.java:1296)
         at org.eclipse.swt.browser.Mozilla.create(Mozilla.java:266)
         at org.eclipse.swt.browser.Browser.<init>(Browser.java:109)
         at fuego.ui.peer.swt.SwtBrowser.createBrowser(SwtBrowser.java:137)
         at fuego.ui.peer.swt.SwtBrowser.<init>(SwtBrowser.java:43)
         at fuego.ui.peer.swt.SwtFactory.createBrowser(SwtFactory.java:71)
         at fuego.ui.Browser.createPeer(Browser.java:99)
         at fuego.ui.UiPeer.getPeer(UiPeer.java:27)
    Please help me asap.
    Thanks

    You're the man! I went though line-by-line with the Debian kernel config and indeed, the Ubuntu config had a bunch of debugging options enabled under Kernel and elsewhere.  Just got the kernel built and it's the right size after disabling these debugging options.
    6.5M 2008-12-28 16:36 linux-headers-2.6.27.10-ubuntu64_1_amd64.deb
    22M 2008-12-28 16:36 linux-image-2.6.27.10-ubuntu64_1_amd64.deb
    Now the real question is why doesn't the kernel-image in the repo have the same huge size?  After all, it is built from the same config file as the one I copied over from the /boot isn't it
    Last edited by graysky (2008-12-28 21:57:12)

Maybe you are looking for

  • Execution of python  scripts through script tag

    I have one line in my xml file : script language="jython" src="scripts/setup.py"/> but when i am running this file as ant script file,it is saying that it cannot find the script tag.. It is giving this error: Ant could not find the task or a class th

  • Why does my mavericks download keep failing?

    Recently my  2011 macbook pro 13'' computer stopped booting up. It would turn on and give the progress bar and the apple logo but the bar wouldn't fill and instead it would shut off by itself. So, I started it holding command r and went to see what w

  • I used trial version of Photoshop, then I bought a month of using it. I have an adobe order number...

    But Photoshop asks for serial number. Guides say I don't need serial number. Photoshop says that  I do need it. It's unlogical. Can somebody help me to understand what's the problem?

  • Capacity Requirement From Released Production Order

    Hi PP Gurus, Can i limit capacity requirement only from released production order ? I don't want to count requirement from production order that just created but not yet release. Regards, Arman Lie

  • Table Space Error using BRTOOLS

    Hi Friends, I have a query to ask please help me out. iam getting an error while trying to extend tablespace PSAPSR3(auto extended-YES).Iam pasting the error bellow BR1049W Not enough free space in E:\oracle\ETS\sapdata1\sr3_72 for total maximum size