Bug in HyperV Integration Services 6.3.9600.16384 ?

Hi,
I just deployed a VM (Generation 1) hosted on a 2012 R2 Datacenter-Hypervisor. For deployment I used WDS and the VM had a "Legacy Network Adapter". Deployment works fine. After deployment I installed Hyper-V Integration Services (Version 6.3.9600.16384).
Then I shutdown the VM, removed the Legacy network adapter and added a "normal" network adapter and started the machine again. I noticed that the network-connection is down.
When I check the properties it says "This device cannot start. (Code 10)".
I tried to uninstall the Adapter, I tried to remove the adapter and add a new one - no change. Even I redeployed the VM completely new...same problem...
Does anyone know this issue?
Regards
Miranda

Hi just a couple of question, what O.S version is you VM running. ? what system did you build your VM on ?/
Try removing and re-installing the integration services on the Virtual Server. make sure it completes with no errors.
you might need to force your VM to detect the new HAL.
To change the HAL
Open the System Configuration utility (MSConfig.exe). To do this, click
Start, click Run, type msconfig, and then click
OK.
Click the Boot tab, and then click Advanced options.
Select the Detect HAL check box, click OK, and then restart the virtual machine.
Important
Changing the HAL will usually trigger an operating system reactivation.

Similar Messages

Improper Install of Hyper-V 2012 R2 Integration Services on 2008 R2 VMs

I have two VMs that have one or more missing/broken services after upgrading to Integration Services 6.3.9600.16384. On one VM the Hyper-V Remote Desktop Virtualization Service is missing and the Hyper-V Data Exchange Service won't start. The
other VM was missing the Hyper-V Remote Desktop Virtualization Service. I was able to create that service by restoring registry entries from another VM with working integration services and re-registering the DLLs from the driver, but the service won't
start. Both services that won't start return the error "1083: The executable program that this service is configured to run in does not implement the service". I also tried an Offline
Install of Integration Services, but that didn't fix anything. Since I am running 2008 R2, there is no uninstall available (I did modify the powershell script from the abve link to uninstall, but it didn't work). I have been un-successful in
finding a way to trick/force the installer to install again over top of itself.

Hi Gregg,
Thank you for posting in Windows Server Forum.
I am trying to involve someone familiar with this topic to further look at this issue. There might be some time delay. Appreciate your patience.
Thank you for your understanding and support.
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

1921 integrated services router possibly affected by ShellShock bug?

Hi all,
Can anyone advise if this device runs Linux or OSX based software?
1900 series (1921) integrated services router
I have been asked to check if this hardware is possibly at risk from the shellshock bug.
Many thanks,
James

Hello:
please see the following link, it may answer you questions
http://tools.cisco.com/security/center/content/CiscoSecurityAdvisory/cisco-sa-20140926-bash
Carlos

Integrations services error 4000 - integration services does not match the expected version

I have a 2 node high availability cluster built on 2012r2 DataCentre. One VM continually fails to backup and gives the event log error
"Hyper-V Volume Shadow Copy Requestor failed to connect to virtual machine 'QuadPro' because the version does not match the version expected by Hyper-V (Virtual machine ID 094B6B22-BBED-4D0B-8E47-D8D4D0D3F986). Framework version: Negotiated (0.0) -
Expected (3.0); Message version: Negotiated (0.0) - Expected (5.0). To fix this problem, you must upgrade the integration services. To upgrade, connect to the virtual machine and select Insert Integration Services Setup Disk from the Action menu."
When I do the suggested action I get a message stating
"The computer is already running the current version of integration services (version 6.3.9600.16384)".
This VM was built through the failover management console under 2012r2. The VM in question is a 2008r2 standard server running a single database application.
Please advise.
Matt

Hi,
I have run the command using both nodes and get the following error:
PS C:\Users\*******> Get-VMIntegrationService -ComputerName node01 -VMName quadpro
Get-VMIntegrationService : A parameter is invalid. Hyper-V was unable to find a virtual machine with name quadpro.
At line:1 char:1
+ Get-VMIntegrationService -ComputerName node01 -VMName quadpro
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    + CategoryInfo          : InvalidArgument: (quadpro:String) [Get-VMIntegrationService], VirtualizationInvalidArgum
   entException
    + FullyQualifiedErrorId : InvalidParameter,Microsoft.HyperV.PowerShell.Commands.GetVMIntegrationServiceCommand
However I tried one of the other VMs for testing purposes (and to check syntax etc) and got the following success message.
PS C:\Users\******> Get-VMIntegrationService -ComputerName node02 -VMName appserver01
VMName      Name                    Enabled PrimaryStatusDescription SecondaryStatusDescription
Appserver01 Time Synchronization    True    OK
Appserver01 Heartbeat               True    OK
OK
Appserver01 Key-Value Pair Exchange True    OK
Appserver01 Shutdown                True    OK
Appserver01 VSS                     True    OK
Appserver01 Guest Service Interface False   OK

Hyper-V 2012 R2, integration services issue on multiple VMs

Hello,
I came to you because we encounter a technical issue on one of our Hyper-V (2012 R2).
Our backup (Veeam backup in last version) are still failing with error :
Guest processing skipped (check guest OS VSS state and integration components version)
After checking integration service states of those VMs on the Hyper-V, we get this result :
Get-VM | ft Name, IntegrationServicesVersion
Name
IntegrationServicesVersion
xxx-3REP-01
6.3.9600.16384
xxx-ADMIN02
xxx-BAK02
6.3.9600.16384
xxx-MAIL-01
xxx-SCOM-01-1
6.3.9600.16384
xxx-SQL02
6.3.9600.16384
xxx-VC-01
6.3.9600.16384
xxx-VD01
xxx-VMM02
xxx-VMM03
xxx-WEB01
Get-VMIntegrationService xxx-vmm02 | Select Name,OperationalStatus
Name
OperationalStatus
Time Synchronization
{Ok}
Heartbeat
{Ok, Ok}
Key-Value Pair Exchange                                  {LostCommunication}
Shutdown
{LostCommunication}
VSS
{LostCommunication}
Guest Service Interface                                     {LostCommunication}
I already try to disable, then enable the operationalStatus :
Disable-VMIntegrationService -VMName MyVM -Name VSS,Shutdown,"Key-Value Pair Exchange"
Enable-VMIntegrationService -VMName MyVM -Name VSS,Shutdown,"Key-Value Pair Exchange"
The status is OK, but If I retry my backup I have the same error.
So, is there a way to reinstall integration service component without rebooting ?
Many thanks for your help.

On the Windows VMs that are not 2012 R2, insert the Integration media ISO, install it, and reboot.
When all is done, run this:
# Input:
$HVHost = "YourHostHere"
# Processing:
$VMInfo = @()
Get-VM -ComputerName $HVHost | where { $_.State -eq "Running" } | % {
$Info = New-Object -TypeName psobject
$Info | Add-Member "VMName" $_.Name
$Info | Add-Member "IntegrationServicesVersion" $_.IntegrationServicesVersion
$OS = Invoke-Command -ComputerName $_.Name { (Get-CimInstance Win32_OperatingSystem).version } -ErrorAction SilentlyContinue
$Info | Add-Member "OSVersion" $OS
$VMInfo += $Info
# Output:
$VMInfo | Out-GridView
$VMInfo | FT -AutoSize
$VMInfo | Export-Csv .\VMInfo.csv -NoTypeInformation
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Integrated Services act up when VM is part of domain?

Running Server 2012 R2 Datacenter on a HP Proliant 380p Gen8 (the HP was patched with the latest SPP)
I have created two templates running 2012 R2 Standard. (A Gen 1 and a Gen 2) The following scenario applies to machines made from both these templates.
All Oss are patched to current (as of Wed).
When the server is not part of the domain, and one selects shutdown within Hyper-V manager, the machines shut down with no issue. Fast. (You’ll see “shutting down 5%” then “Succeeded”)
However, when joined to the domain, and one shuts it down, the process is slower (You’ll see “shutting down 5%...10%...15%” etc. in 5% increments until…)
at 65% of shutdown integrated services clears from "Up to date" to ‘blank' - meaning states nothing. This is observed in the summary of the VM.
At 90% of shutdown the process hangs, then after some time the Heartbeat reports Lost Communication. This is observed in the summary of the VM.
One can not log into the server via console.
One is forced to turn off the VM, however when turned off the status goes to Shutdown Succeeded (this is different than a straight Turn Off…the process is ID’d as Turned Off.
The event logs on the guest are clean (not only within granular Applications and Services, but just reviewing the EventLog entries within System. As far as the OS is concerned, these are clean shutdowns (unless a Turn Off was
initially initiated).
Confirmed integrated services are current (built into OS, but when I rerun it is reported up to date at 6.3.9600.16384.
Ran sfc /scannow on the guest, no issue reported.
same results if the guest server is connected to network or not.
Now, I have tested by removing the server from the domain and re-adding it back three separate times and the results are the same (in a workgroup no issue, when part of domain, the above occurs).
The Host is within the domain. They are all on the same network. Should be noted, when joined to the domain, the domain functionality (shares, etc) function as expecte

I don't think this has anything to do with Hyper-V integration service. What I'm reading is consistent with the integration service working as designed, initiating a shutdown, that includes shutting itself down. Slow shutdown when domain joined has to do
with domain GPOs, or shutdown procedures when domain joined. Possibilities include:
Maybe you clear the page-file at shutdown. This may be set via GPO. To check it, in regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager\Memory Management, locate the value ClearPageFileAtShutdown and make sure it is set to
0.
By default on shutdown, Windows waits 12 seconds per each active application to close before forcing it. You can try tweaking the wait time to see if you speed up the shutdown process. In regedit find HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control,
modify the WaitToKillServiceTimeout value in milliseconds
Make a
shutdown trace to determine the cause with a tool like this one. See
this post for more details.
Sam Boutros, Senior Consultant, Software Logic, KOP, PA http://superwidgets.wordpress.com (Please take a moment to Vote as Helpful and/or Mark as Answer, where applicable) _________________________________________________________________________________
Powershell: Learn it before it's an emergency http://technet.microsoft.com/en-us/scriptcenter/powershell.aspx http://technet.microsoft.com/en-us/scriptcenter/dd793612.aspx

Hyper-V Integration Services - DriverPackage or Application

Hello SCCM community,
currently we are deploying the Driver for Hyper-V Integration Services (Windows6.x-HyperVIntegrationServices-x64.cab) as Driver Package. The deployment is OK. But if I look into Device Manager the drivers are not digitally signed. This is somehow
strange.
Deploying via DISM will result in same issue.
I did then a research and found out that the package can be deployed via Application by using the MSI file. http://social.technet.microsoft.com/Forums/en-US/dd58b4cf-a954-4525-9a05-a84ebb073002/install-integration-components-hyperv-30-with-sccm-2012?forum=configmanagergeneral
I tested the installation via MSI it works fine and the Device Manager is not complaining about not signed drivers.
Do you face the same issue? Are you also deploying via Application?
Many thanks in advance.
Guitarman

Ok, guys I did like described in the link. I used the setup.exe and deployed it as application.
As detection method I used one of the sys-files which where installed.
As uninstallation command I used: dism /online /Remove-Package /PackagePath:\\share\software$\Windows6.x-HyperVIntegrationServices-x64.cab
/norestart

BIAPPS 7.9.5.1 Failure connecting to integration service

Business Intelligence 10.1.3.4.1
Biapps version 7.9.5.1
Informática Powercenter 8.1.1
After completing the installation according to the manual we have copied the hibernate libraries in DAC directory:
http://download.oracle.com/docs/cd/E10783_01/doc/bi.79/e10742/anyinstadmwininstall.htm#i1105233
And also copied the Emergency Bug Files in Informatica:
Informatica Session Completing Successfully, but Still in Running Status
We have tried with Informática Powercenter 8.1.1 without Service Pack, and also applying the SP5, but we are getting the same error in DAC while making the Test Connection in both cases:
"Failure connecting to "integracion_informa"
STD OUTPUT
Informatica(r) PMCD, version [8.1.1 SP5], build [135.0129], Windows 32-bit
Copyright (c) Informatica Corporation 1994 - 2008
All Righst reserved
Invoked at Fri Apr 16 13:29:52 2010
The command: [pingserver] is deprecated. Please use the commando [pingservice] in the future.
WARNING: Lost server connection.
ERROR: Cannot connect to Integration Service [integracion_informa:4006]
Completed at Fri Apr 16 13:29:52 2010
ERROR OUTPUT"
cmd window:
"16-abr-2010 13:29:52 com.siebel.analytics.etl.client.util.DataVerification giveWarning
INFO: Unknown verification type!
16-abr-2010 13:29:52 com.siebel.analytics.etl.client.data.dataobject.UpdatableDataObject createUpdate
INFO: 0 calls to database avoided
DAC Command Line Utility Invocation"
There´s no other information about the error. Test connection for repository is correct.
We have done the installation many times, restarted the computer, restarted informatica services, restarted DAC server, verified in the Powercenter Admin Console that both (integration and repository) services are up...
Days ago, we have succesfully installed Biapps 7.9.6.1 and loaded PeopleSoft 9.0 data, but now we are trying to load PeopleSoft 8.8 and we are obligued to uses Biapps 7.9.5.1, because 7.9.6.1 have no connection with PeopleSoft 8.8.
Thanks in advance.
Edited by: user11179355 on 19-abr-2010 1:46

We have upgraded this repository to connect to it using DAC version 10.1.3.4.1 and we noticed that in Setup-Informatica Servers all the fields except Domain, had the values we entered using the previous version of DAC. This makes sense, because in the previous version of DAC (Biapps 7.9.5.1) you cannot enter the domain name.
If we try to connect to it without filling this field we get the same blank error. But if we fill it with the correct domain name the test ends succesfully. So if we could put the domain name in DAC Biapps 7.9.5.1 we might make it work.
Is there any place where you can put the domain name value in this version?
Does anyone know the table where this value is stored?

SAP Business One Integration Services Authentication Failed

Dear ,
ALL SAP forum members,
Iam Using SAP Business One 8.81 PL 06, Micorsoft SQL 2008 R2
In SLD B1DI and JDBC, the connections were tested successfully.
Whenever I log into SBO, I am getting "SAP Business One Integration Services Authentication Failed" error message. I did extensive research on all possible SBO documents dating 1 year back especially in B1ic Troubleshooting Document (New and Old) and searched the length of the SBO forums, but I could not a solution.
I uninstalled and reinstalled the B1f package many a time. The integration services we re also restarted many times and the connections were all tested successfully. Firewall, AntiVirus also checked.
In the B1f, in the Monitoring Window, the login is "Ok" but the AuthCheck is "Failed". I checked Authent.Monitor->Authentic Info and I found the following message under Action message "Wrong Usrname and Password".
I debugged and i found again "/com.sap.b1i.vplatform.scenarios.authen/sap.Xcelsius/Authenticate_Check.bfd
But could not understand much of it.
But i could go no further. The experts are requested to suggest their solutions, If any, to me as Iam stuck in this phase for the last 3 week
I hope some experts will guide me over this issue
Thanks and regards
Ashish Gupte

Hi Konstantin Ryahovsky
Thanks for your reply. My problem is solved.
And frankly speaking i dont know how it was solved. I have not uninstall, install ,not even i had restarted the server also.
only change i did in SLD >> Maintainance >>> cfg Runtime >>>> Put server IP address instead of server Name and restarted the services.
Thanks & regards
Ashish Gupte

How can I retrieve an existing .dtsx File out on Integration Services Catalog

I have a problem with an older SSIS Package and I am trying to decipher what exactly it does. I see the Package in Microsoft SQL Server Management Studio and in our Server and under
Integration Services Catalog. It has a .dtsx extension on it.
Is there any way that I can copy this Package, this .dtsx file, and open it Microsoft Visual Studio to see what exactly it does?
There doesn't seem to be anything available when I <Right-Click> on the .dtsx Package within Microsoft SQL Server Management Studio to Save As or anything similar. This is the first time I've ever had to look at something existing in the SSIS World.
I just don't know how to get it out and reference and view it is all.
Any help is greatly appreciated and Thanks in advance for your review.

Hi ITBobbyP,
Based on your description, you want to export a .dtsx package file from Integration Services Catalogs, then open it in SQL Server Data Tools.
Based on my test, we can create a project based on a project in Integration Services Catalogs, then we can look into the package in the project. For more details, please refer to the following steps:
Open SQL Server Data Tools, Click File, point to New, and click Project.
Expand Business Intelligence, and click Integration Services.
Select Integration Services Import Wizard in the middle pane, type a name for the solution, project, and specify the folder for the project, and then click OK.
In the Select Source page, select Integration Services Catalog option, specify the name of database server instance on which the catalog exists, and the path to the project in the catalog.
Click Next on the Select Source page to see the Review page.
Click Import to create a new Integration Services project based on the one you selected.
Double-click the desired package name to open the package in the project.
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

[Forum FAQ] How do I send multiple rows returned by Execute SQL Task as Email content in SQL Server Integration Services?

Question:
There is a scenario that users want to send multiple rows returned by Execute SQL Task as Email content to send to someone. With Execute SQL Task, the Full result set is used when the query returns multiple rows, it must map to a variable of the Object data
type, then the return result is a rowset object, so we cannot directly send the result variable as Email content. Is there a way that we can extract the table row values that are stored in the Object variable as Email content to send to someone?
Answer:
To achieve this requirement, we can use a Foreach Loop container to extract the table row values that are stored in the Object variable into package variables, then use a Script Task to write the data stored in packages variables to a variable, and then set
the variable as MessageSource in the Send Mail Task.
Add four variables in the package as below:
Double-click the Execute SQL Task to open the Execute SQL Task Editor, then change the ResultSet property to “Full result set”. Assuming that the SQL Statement like below:
SELECT   Category, CntRecords
FROM         [table_name]
In the Result Set pane, add a result like below (please note that we must use 0 as the result set name when the result set type is Full result set):
Drag a Foreach Loop Container connects to the Execute SQL Task.
Double-click the Foreach Loop Container to open the Foreach Loop Editor, in the Collection tab, change the Enumerator to Foreach ADO Enumerator, then select User:result as ADO object source variable.
Click the Variable Mappings pane, add two Variables as below:
Drag a Script Task within the Foreach Loop Container.
The C# code that can be used only in SSIS 2008 and above in Script Task as below:
public void Main()
   // TODO: Add your code here
            Variables varCollection = null;
            string message = string.Empty;
            Dts.VariableDispenser.LockForWrite("User::Message");
            Dts.VariableDispenser.LockForWrite("User::Category");
            Dts.VariableDispenser.LockForWrite("User::CntRecords");
            Dts.VariableDispenser.GetVariables(ref varCollection);
            //Format the query result with tab delimiters
            message = string.Format("{0}\t{1}\n",
                                        varCollection["User::Category"].Value,
                                        varCollection["User::CntRecords"].Value
           varCollection["User::Message"].Value = varCollection["User::Message"].Value + message;
           Dts.TaskResult = (int)ScriptResults.Success;
The VB code that can be used only in SSIS 2005 and above in Script Task as below, please note that in SSIS 2005, we should
change PrecompileScriptIntoBinaryCode property to False and Run64BitRuntime property to False
Public Sub Main()
        ' Add your code here
        Dim varCollection As Variables = Nothing
        Dim message As String = String.Empty
        Dts.VariableDispenser.LockForWrite("User::Message")
        Dts.VariableDispenser.LockForWrite("User::Category")
        Dts.VariableDispenser.LockForWrite("User::CntRecords")
        Dts.VariableDispenser.GetVariables(varCollection)
        'Format the query result with tab delimiters
        message = String.Format("{0}" & vbTab & "{1}" & vbLf, varCollection("User::Category").Value, varCollection("User::CntRecords").Value)
        varCollection("User::Message").Value = DirectCast(varCollection("User::Message").Value,String) + message
        Dts.TaskResult = ScriptResults.Success
End Sub
Drag Send Mail Task to Control Flow pane and connect it to Foreach Loop Container.
Double-click the Send Mail Task to specify the appropriate settings, then in the Expressions tab, use the Message variable as the MessageSource Property as below:
The final design surface like below:
References:
Result Sets in the Execute SQL Task
Applies to:
Integration Services 2005
Integration Services 2008
Integration Services 2008 R2
Integration Services 2012
Integration Services 2014
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

Thanks,
Is this a supported scenario, or does it use unsupported features?
For example, can we call exec [ReportServer].dbo.AddEvent @EventType='TimedSubscription', @EventData='b64ce7ec-d598-45cd-bbc2-ea202e0c129d'
in a supported way?
Thanks! Josh

Error while running SSIS package from Integration service or via Job

Hi All,
I encounter the below error while running SSIS Package from Job or integration service. However on execution completes success fully while running from data tools. The issue occurs after migration to 2012 from 2oo5 dtsx. PFB the error.
SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on OLE DB Source returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by
the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
A buffer failed while allocating 10485760 bytes.
The system reports 26 percent memory load. There are 206110765056 bytes of physical memory with 150503776256 bytes.
free. There are 2147352576 bytes of virtual memory with 185106432 bytes free. The paging file has 208256339968 bytes with 145642921984 bytes free.
The package also runs successfully from other servers. This happens only in one of our server.seems like issue with some sql configuration.

Hi ,
Are you running using SQL Agent Job and Data tools on same server or different?
If it is executing fine using Data tools and failing with Job it might be User credentials issue.Try
to run Job with your credentials by using proxy .
Regards,
Prathy
Prathy K

Error while running maintenace plan "Integration Services evaluation period has expired."

We are getting below mentioned error while executing SSIS package or maintenance plan.
Executed as user: ICROSSING\*****. Microsoft (R) SQL Server Execute Package Utility
Version 11.0.3381.0 for 64-bit Copyright (C) Microsoft Corporation. All rights reserved.
Started: 3:35:00 PM Error: 2014-02-23 15:35:01.56
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Error: 2014-02-23 15:35:01.58
Code: 0xC0000033     Source: Db Engine database Log backup
Description: Integration Services evaluation period has expired.
End Error Could not execute package because of error 0xC0000033.
Started: 3:35:00 PM Finished: 3:35:01 PM
Elapsed: 0.671 seconds. The command line parameters are invalid.
The step failed.
We have license BI edition of sql server 2012. Other services and database are working fine. Issue with integration service only.
Please help me sort out the issue.
Thanks,
Shitalkumar Kasliwal

Hi Shitalkumar,
The issue may occur if Evaluation Edition or CTP Edition of SQL Server was installed earlier on the server, however, the previous instance of SQL Server was not uninstalled completely or upgraded to Business Intelligence Edition successfully. To resolve
the issue, modify the HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\110\ConfigurationState registry key value from 1 to 3, and then rerun the Edition Upgrade procedure from the SQL Server install media to upgrade the SQL Server components to the
licensed edition again.
Reference:
http://support.microsoft.com/kb/971268
Regards,
Mike Yin
TechNet Community Support

SSIS package not working on 2012 Integration Service Catalog deployment

I've set up a package that imports data from an excel spreadsheet(my only possible data source). I deployed it and it worked for a while and then broke. I had to switch to a generated connection string for excel with IMEX=1 to make things work.
Now it works fine on from Visual Studio on my local machine, but when I run it from Integration Services I get:
"The external column "<COLUMN NAME>" needs to be updated, for every column in the spreadsheet. I am using the same excel file on my local machine as on the other machine.
Why can't I get it to work when it's deployed to the SSIS Server?

Hi,
Excel files are a bit tricky to work with. Any small change in data type, metadata can make your package fail.
I have had such experience earlier. The file contents, columns everything was same but it used to fail with same metadata issue.
Here is what helped me:
1. I tried to clear all formatting using the excel formatting options and it worked for me. But we can't ask the users to do all these things manually before uploading files to the application.
2. So, I created a new excel file and created all column headers manually. Please make sure don't copy paste from any other excel file otherwise formatting and metadata will get changed.
3. Once you have the template ready. Configure your package Excel columns according to the template.
4. Now, If you copy and paste data into this plain formatting free file, data will adapt the template settings and won't give the metadata errors.
5. We uploaded the same template on our application and users created the data in same template which resolved the issue for us.
CSVs on the other hand don't have any such issues.
Hope this helps. Good Luck!

2008 R2 Hyper-V Integrated services error 61658...

Kind of got myself into a bad situation I think. I run a single Windows 2008 R2 Server w/SP1 that hosts 5 VM's that host two Windows Server 2003 SP2 machines and the rest are 2008 R2 Servers w/SP1. On one of the 2003 VM's I was having issues
with the mouse not being captured. I decided to reinstall the integrated services. The reinstall seemed to complete normally, but when it was done the mouse capture still did not work. So I rebooted just to check and still no mouse capture.
So I went into add remove programs and uninstalled it. I rebooted and then noticed the problems that caused. The uninstall made the VM lose the SCSI adapter and the NIC. So after getting a legacy NIC added I was able to be past that issue, but no
VHDs are accessible that were are connected to the SCSI Controller. When I try to install the Integrated Services, it gets part way through the "Updating Storport Driver" step and then throws this message: [ (X) An error
occurred: One of the update processes returned error code 61658.] This machine is our Active Directory (Domain) Controller. Again to mention, this is only machine out of the 5 that is having this problem. Any help would be greatly
appreciated.
PS: None of these are installed using Beta or RC's versions of the OS, the Hyper-V server and the VM's have all been in place for 2+ years working fine.
Thanks
Update: A friend of mine looked things over and found a vmg...log file that shows the problem is when the Integrated Services install try's to run the a KB that fails to installed: (KB943295). So I will investigate. But I did get the
server up and running again by adding a legacy network adapter and moving the two VHD files that were attached to the problem VM's SCSI controller to the VM's IDE controller. So a band-aid I know but at least I was able to get 41 users back working
after 7 hours of pulling out my hair! I do need to know I have this VM functioning 100% as it should so I'll continue to work on it.

Hi SScott2010,
Please try the following setps :
1. backup the problematic VM first
2. If the VM was migrated from virtual pc , please run "msconfig " --> click the boot tab then click advanced options --> select the Detect HAL check box
3. make sure the service " cryptographic service " is running automatically.
4. restart the VM
5. Install the hotfix of kb822798 in the problematic VM :
http://support.microsoft.com/kb/822798/en-us
6. try to install the Integrated Service again.
Hope it helps
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Bug in HyperV Integration Services 6.3.9600.16384 ?

Similar Messages

Maybe you are looking for