Bug in library compare view

trying LR 3.2 now and notice something strange:
In library compare view, if i zoom in to 1:1, use the mouse to drag the photo around and release the mouse, then the screen jump to loupe view instead of remain in compare view, anything wrong? it should be still in compare view right? it is ok in old version.
can any one advise?

it is not a double click issue, also checked the mouse, it OK too.
I think it is a bug.

Similar Messages

  • Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems n

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

    Since installing LTR 5.4, which I've now upgraded to 5.6, I've encountered repeated slowness and malfunctions in operations, especially when using the Compare View function and the Tab key to open and close the right and left side panels.  Such problems never arose during two years of using LTR-4 and nothing else has changed on my computer.  I have a pretty simple system with only a few plug-ins, which are usually not in operation.  I have 12GB of RAM in my Windows 7 PC.  I could illustrate these problems with screen shots if you would tell me how to submit screen shots.  Otherwise I will try to describe the problems in words.
    The problem is clearly cumulative, growing worse as usage time passes.  Compare View feature gradually slows down and eventually seems to choke as my work session proceeds. If I Exit LTR and re-enter and start all over, things will work normally for maybe 30 minutes, but then the Compare View feature begins to become very slow to respond.   In a recent example with my screen full of thumbnails in Library mode I highlighted two images to compare. LTR started to open the Compare View screen by first having the top row of thumbnails disappear to be replaced by the "SELECT" and "CANDIDATE" words in their spaces  (but no images), but Compare View never succeeded in gaining control of the screen. After some seconds the top row of thumbnails reasserted its position and the Compare View windows disappeared. But LTR kept trying to bring them back. Again the top row of thumbnails would go away, Select and candidate would reappear, try again, and give up. This went on for at least 2-3 minutes before I tried to choose File and Exit, but even that did not initially want to respond. It doesn't like to accept other commands when it's trying to open Compare View. Finally it allowed me to exit.
    To experiment I created a new catalog of 1100 images.  After 30-40 minutes, the Compare View function began to operate very slowly. With left and right side panels visible and two thumbnails highlighted, hitting Compare View can take half a minute before the two mid-size  images open in their respective SELECT and CANDIDATE windows. When the side panels are open and two images are in the Select/Candidate spaces, hitting the Tab button to close the side panels produces a very delayed response--25-30 seconds to close them, a few more seconds to enlarge the two images to full size. To reverse the process (i.e., to recall the two side panels), hitting Tab would make the two sides of the screen go black for up to a minute, with no words visible. Eventually the info fields in the panels would open up.
    I also created a new user account and imported a folder of 160 images. After half an hour Compare View began mis-placing data.  (I have a screen shot to show this.)  CANDIDATE appears on the left side of SELECT, whereas it should be on the right. The accompanying camera exposure data appears almost entirely to the left of the mid-screen dividing line. Although the Candidate and Select headings were transposed, the image exposure data was not, but the data for the image on the right was almost entirely to the left of the line dividing the screen in two.
    Gurus in The Lightroom Forum have examined Task Manager data showing Processes running and Performance indicators and they see nothing wrong.  I could also send screen shots of this data.
    At this point, the only way I can process my images is to work 30-40 minutes and then shut down everything, exit, and re-start LTR.  This is not normal.  I hope you can find the cause, and then the solution.  If you would like to see my screen shots, tell me how to submit them.
    Ollie
    [email protected]

  • No images in Library grid view

    Hi,
    In V1.0, when I set my Library to grid view I only see my images for a short while. Then all images turn to grey squares. Updating the grid (like changing thumbnail size or sorting order) again shows images only for a short while.
    Loupe and Compare view are ok.
    Never had this with the Beta versions.
    Is there a setting I need to change?
    Thx,
    Haya

    See info for this at
    LR Extras FAQ.
    Don

  • Unable to set flags independently in Compare View in LR3

    When I select a specific image in the compare view (LR3) and tag it as "Rejected" (hitting "x"). both images up for compare are being flagged as rejected. both the good and bad. Maybe my memory is not serving me correctly, but I thougt that in the prior versions of LR you could flag each image independently in the Compare view, that is flag one as "Rejected" and the other as a "Pick" ("p"). Now I am having to look at the images in Compare on one monitor and go over to my second one that is showing the Library and select the images to be rejected and hit "x" and then select the one that is a keeper and click "p". This seems to be rather counterintuitive and cumbersome. It seems a natural expectation to want to compare images side by side and then flag the one you want to keep and flag then independently flag the ones that are not keepers. Is what I am experiencing normal? Thanks in advance for any help.

    Yes, it makes sense.  LR thinks that the Grid is on the primary monitor, which is why both images get flagged when you hit "p".
    rgphotoman wrote:
    John, I have some further input after doing some additional testing. Apparently, the inability to perform independent flagging in a Compare View somehow ties to the other monitor being set to Grid View. What I did was set one monitor to the Grid View and the other to Compare view for two images and then went to that view, selected one of the images, and then I hit the "p" key to flag the image. As expected both were flagged. Then I hit "u" to unflag them and went to the Grid view and changed it to Compare as well (i.e. both monitors were showing that view). Then I went to the other monitor that I was originally doing the compare and hit "p" and voila only one image flagged. I was then able to flag the other as Rejected as well. I then went to the other monitor and changed the view back to Grid and checked the results and indeed both images were properly marked. So it appears that this issue somehow relates to having the Grid view active. Does what I did make sense?

  • Cycle through different "compare" views?

    In LR 1.4 it was possible to use different views in the compare mode, i.e. left/right, left/right split, top/bottom, top/bottom split. There was a keyboard shortcut for cycling through the views (which I can't remember).
    In LR 2.0 I can't see how to do this. Say I want to compare two images. I command-click on them and hit the C key to go into Compare mode. They appear next to each other. So far, so good. But I am not able to change the Compare view to "top/bottom" or "left/right" split.
    Is this still possible? Is there still a keyboard shortcut?
    Thanks,
    Chris

    You're mixing things.
    These compare options were (and still are) available in the Develop module to compare the Before and After effect. Library's Compare mode never had top/bottom split options.

  • New to Photoshop;Viewing TV and want to save to MY Library to view later. Can't figure out how to save. When I open or click on My Library it shows I need to sign in and within a few seconds it shows my sign in but nothing changes on page.

    Trying to figure out how to save Adobe TV episode as I am new to Photoshop and need insruction... trying to open & save to My Library to view later. It instructs me to sign in but I am already signed in. Anyone know how?

    Those are the instructions for your computer's iTunes (i.e. using the Store menu at the top of your computer's iTunes and selecting 'View My Account' on it). If you are doing it on your iPad then are you following the instructions for iOS devices :
    To unhide your purchases
    Depending on the content type, open the App Store, iBooks, or iTunes Store on your device.
    Scroll to the bottom of the main page.
    If you're not already signed in, tap Sign In.
    Tap your Apple ID name, then tap View Account.
    Scroll down on the Account pane, and tap Hidden Purchases.
    Locate the item you would like to unhide then tap the Unhide button.

  • Blog post : "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)"

    hi
    Using steps 1 to 13 from the blog post "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)" by Andrejus Baranovskis, I have been able to reproduce the issue he describes.
    see http://andrejusb.blogspot.com/2008/12/bug-in-createedit-view-criteria-wizard.html
    I the blog post comments he writes "... there was no time for me to fill bug in Metalink ...".
    Maybe someone from Oracle can pick it up from this forum post and file it as a bug if it is one (and if possible post the bug number here).
    many thanks
    Jan Vervecken

    The mechanism is to create a reproduceable test case, create a Service Request in metalink.oracle.com, post the test case, and convince the analyst to file it as a bug.
    It may be not efficient at some time, but this the way it is handled.
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Document Library Custom View "Grouped By" only shows one group

    I have created a Document Library Custom View with the  "Grouped By" option turned on and grouped by a column  called "media type" which has 3 possible choices.  For some reason only the first group is displayed. The other
    groups show that they have items in them but can't be accessed. I have expanded turned on. 
    Here are some screenshots: 

    Hi zaxxon,
    Please check if the above first 6 images (e.g. Managing Threating Confrontations - OneDrive for Business Tutorial)are with value "Training" and "tutorial", if yes, there should be something wrong with the grouped list view of Assets library.
    Based on icons from your image, you should be using Office365 SharePoint Online, I would recommend you post this issue in our dedicated Office365 SharePoint online forum below, and I think fixing this issue would be involving back-end support engineer from
    server side.
    http://community.office365.com/en-us/f/156/t/236901.aspx
    Office365 SharePoint Online forum
    Thanks
    Daniel Yang
    TechNet Community Support

  • I have multiple iPhoto libraries and when I selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open apps window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    I have multiple iPhoto libraries on my Macbook Air 10.7.5 and when I am selecting which library to view (hold down 'option' key and launch iPhoto from the dock) it automatically closes another open application window eg. Chome, Word. 1 app closes every time I launch iPhoto this way.

    If you're pushing Option at the exact moment you're clicking the Dock icon, it's supposed to do that. Wait until just after clicking it.
    (112342)

  • Text labels missing under Library and Viewer icons in V31

    I just built a multi-folio app with DPS Pro Edition. I specified V31. When I preview the resulting Developer app on my iPad, the text under the small "Library" and "Viewer" icons at the bottom of the screen is missing. The Library and Viewer icons are there, but the space below the icon where the words "Library" and "Viewer" should appear is missing.
    I didn't select "Use Customized Strings" or anything like that when I built the app in DPS App Builder. Any ideas?

    Sent the details to your email. If you can:
    Can you try to build a new app and see if the labels are missing?
    If the app is for both ipad/iphone try to rebuild for ipad only?
    Check the app builder version number?
    Thanks

  • Thumbnails not visible in Library Grid View

    In LR 1.0 on Mac OS X, after converting from Beta 4.1, my thumbnail images are not visible in the Library Grid View, except for just a brief moment when I first click on a Folder (Shoot) name. The images then disappear, leaving just the background.
    Double clicking on an image background brings up the image correctly in Loupe View.
    Did I miss something in the conversion?
    Many thanks!
    (Mac OS X 10.4.8, Dual 2 GHz PowerPC G5, 6.5 RAM)

    Hello,
    I have a similar problem, (windows xp)
    Besides the thumbnails not being visible, when I open LR 1.0, it shows my folder structure as imported, with the number of files per folder, but right after that, the folder names start to gray out, and the number of pictures in each folder goes to "0" . The pictures are still there.
    For each keyword it shows 0 pictures, until I click on that keyword, then it shows the number of pictures for that keyword.
    I did uninstall 4.1, and deleted the database, I don't know if this is related to some left over Beta 4.1 somewhere in there.( my old identity plate still shows) I had no issues, other than being slow when using beta 4.1, I had only imported pictures on a as needed basis( in 4.1), and not the whole folder structure. ( as I want to do with LR 1.0 )
    Any solutions ? ( other than uninstall and trying to to a better job of cleaning up, before re installing ? )
    P.S. about 1000 files ( jpg,tiff,psd) did not get imported due to errors, but most of them were in my 4.1 library with no problems.
    P.S 2 the keywords were entered either in bridge or ID imager, and written back to the files, I never used beta 4.1 to enter keywords, just used it to search them.
    P.S 3 ( sorry this is getting too long...) it crashed on import 5 times, about 20,000 files, internal HD just for pics.
    thank you,
    Fabio Ventura

  • ITunes Music Library, Songs view empty

    Hi All,
    iTunes 11.1.1.11 on Windows 7.
    I have plenty of songs and I can see them in the Music Library > Albums view. But the Songs view is empty. What's up with that?
    Any assistance gladly appreciated!
    Rob
    Message was edited by: Robert Mark Bram. Added screen shot.

    Have a look at this article in the Apple Knowledge Base and let us know if it solves your problem.

  • I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing- Any suggestions? I have iTunes Match turned on and everything.

    I'm all Mac across the board: iPhone 5, Macbook Pro, Apple TV etc. I can't get the movies I've purchased on my Apple TV to appear in my iTunes library for viewing… Any suggestions? I have iTunes Match turned on and everything.

    Thanks Terence! I can see iTunes library from neither iPhoto or iMovie . I'll check on iTunes forum.

  • On my TV, I can access my library and view movie rental trailers but when I actually order the move, it says unable to access server.  Any ideas?

    On my TV, I can access my library and view movie rental trailers but when I actually order the movie, it says unable to access server.  Any ideas?

    Have you tried rebooting or restoring?

  • Cannot move photos via drag and drop (library grid view)

    I've seen several adobe tutorials and youtube videos that show moving photos or folders by drag and drop in the library grid view.  I cannot get it to work.
    Steps:
    1. Mousedown on a photo (not the frame) in the grid
    2. Drag the mouse to a folder in the "Folder" pane (left of the grid)
    3. Mouseup on the destination folder
    Results:
    Nothing happens.  The mouse cursor doesn't change from the arrow.  There is no indication I can drag and drop.  The photos are not moved.
    The photos are stored on a NAS.  Of course I can move them around via Windows Explorer, but I want to do this from inside LR4 for obvious reasons.  From LR4, I can create new folders, but I still cannot move photos into those folders.  I also tried creating a new folder on a local drive.  Again, I was able to create the folders, but was not able to move any photos into the folder.
    What else can I do to toubleshoot this issue?

    I created a new catalog.  Imported a folder on my C drive, created a subfolder, and successfully moved photos into the subfolder.
    I tried the same steps in my original catalog and now I can move all photos (including those on my NAS).  I've been at this for 3 hours.  I have no clue why it is working now, but I guess I'm happy.  Now, it shows the stack of photos when I try to drag and drop.
    I even reverted to my original preferences file (that I backed up before deleting) and I'm still able to move the files.  Really strange.

Maybe you are looking for