Bug in New Association Wizard [jdev903/bc4j]

Hi,
in the wizard for creating a new Association between two entities, the multiplicity lacks the option '1 : 0..1'.
As a workaround you can create the association the other way round, because '0..1 : 1' is present, but then you can't use the 'Composition Association' checkbox (the composition would end up on the wrong side).

I've filed Bug#2657816 to track this issue. Thanks.

Similar Messages

New hardware wizard can't find creat

my Zen microphoto went on the blink. upon trying to reset it appears to be hosed. Downloaded the new firmware for it but when I use the script it says the device isn't plugged in. upon plugging it in no change, if I reboot the zen, the new hw wizard asks for the original cd or location. Can't find the cd is there another place i can go to get this driver or whatever is on the installation cd? Ithink once this system recognizes the device the fw load will be fine.

Here's what I did
1. Uninstalled EVERYTHING (& restarted PC)
2.Downloaded the latest iPod Updater AND iTunes from Apple's Site (I didn't use the enclosed CD this time!)
3. Installed the new iTunes
4. Installed the NEW iPod updater
5. Plugged in the iPod (after doing a "reset")
6. From then on..I have to open iTunes FIRST before plugging in the iPod..(I think it's a bug in their software..shocking..eh?...)..This worked for me..If I just plug in the iPod first..without opening iTunes first..well..don't ask...)

This is the first time this has ever happened but I plug in any device iPod, iPhone and the computer opens up a found new hardware wizard. I can't sync any of my devices and I'm not happy. Any helpers?

I can't connect any of my devices to my iTunes. Anytime I plug one of them into my computer I get a new hardware wizard window that pops up and I can seem to load anything from an iPod or iPhone if I run the wizard. Any helpers? I've been using iTunes on this computer for a very long time and this is the first time that this wizard has shown up ever. Please help.

I have replied some one with the same problem.
If your contacts saved in the SIM, you can import them from SIM. Please see this help.
http://support.apple.com/kb/HT4994
If not, you may use a third tool to recover your lost contacts.
http://easy-iphone-recovery.blogspot.com/iphone-recovery-resource.html

NI-DAQmx 8.3.0f0 installed but Found New Hardware Wizard shows up when plugging in a USB-6008

I have NI-DAQmx Device Driver 8.3.0f0 installed with LabVIEW 8.2 but when I plug in a NI USB-6008 I see the "Found New Hardware Wizard" in Windows XP. Since the DAQmx driver is installed shouldn't Windows recognize the device immediately?
I cancel the driver and I get the taskbar message "A problem occurred during hardware installation. Your device may not work properly."
The USB-6008 does not appear under Devices and Interfaces in MAX.
Help would be appreciated.
Thanks,
Dave

Ahh, I thought Windows performed an automatic search after cancel is clicked.
I clicked next and allowed Windows to search and it says:
"Cannot Start this Hardware"
There was a problem installing this hardware: USB-6008
The device cannot start. (Code 10)
I tried uninstalling and reinstalling the device but the results were the same.
Any ideas?

SOLVED: 1030NR - SD Card Reader launches Found New Hardware Wizard when media is inserted

I purchased the HP Mini 1000 1030NR a few days ago and have been very happy with it so far. Last night I attempted to use the integrated SD card reader to view some photos from my digital cameras SD card. When I inserted the card into the drive, Windows did its normal hardware initializations. It should have detected and installed the SD Card Reader automatically, but instead I was presented with the "Found New Hardware" wizard. Every attempt to install the driver automatically via the Wizard failed. Every SD card I tried in the reader produced the same results.
After spending 2 and a half hours online with HP support, their eventual resolution was to do a full System Restore. As owners of the HP Mini 1000 will know, this process is made difficult due to the units lack of a DVD-ROM drive. Furthermore, the problem here is clearly a missing driver. Doing a System Restore as suggested would be like swatting at a fly with a cinderblock. It may resolve the problem, but there is a much more straightforward way.
The problem is that due to the nature of the XP installation on the 1030NR,(scaled down for performance/size reasons), the linkage between recognized hardware and the internal Windows driver respository has been broken, at least as far as USB devices are concerned. I found this out after the same HP support technician suggested I uninstall all of my USB Root Hubs from Device Manager and reboot. Those never came back either. Fortunately I had created an XP restore point beforehand and quickly got my USB ports back. Of course, my SD card reader still didn't work.
The solution is to restore that linkage between recognized hardware and the internal Windows driver repository so that the operating system can "find" the USB drivers and in turn, install the necessary software components for the SD card reader. Instructions for doing this are as follows:
1. Insert an SD card into the SD card reader. The "Found New Hardware" Wizard will appear.
2. Check the radio button to not allow Windows Update to search for software. Click Next.
3. Check the radio button to "Install from a list or specific Location (Advanced). Click Next.
4. Check the radio button to "Search For the Best Driver In These Locations. Then click the checkbox "Include this location in the search."
5. Click the Browse button and navigate to "C:\Windows\inf" If you cannot navigate to this folder you may type it in the box manually. Click Next.
6. Follow the remaining on-screen prompts to complete the software driver installation. You may receive an error code at the end indicating that the device could not start. Disregard this for now. Once driver installation has been completed, reboot the computer.
7. Once the system is back up, the "Found New Hardware" wizard will probably reappear. If it doesn't, make sure the SD Card Reader has a card inserted in it. Cancel the Found New Hardware wizard and click Start - Control Panel - System - Hardware tab - Device Manager and look for entries with either an exclamation point or a question mark. You'll probably see the SD Card Reader with an exclamation point and an "Unknown Device" with a question mark.
8. For the SD card reader, right click on it and select "Update Driver..." from the list of options. Follow steps 2 through 6 above to complete installation. At the end, the card reader should be functional (you can see it in Windows Explorer, etc.) but you'll still have an "Unknown Device" in Device Manager.
9. To resolve the "Unknown Device", once again go to Device Manager, right click on the Unknown Device entry, click Update Driver and follow steps 2 through 6 above.
10. One final reboot and the SD card reader should be functional and no ? or ! warnings/errors should be present in Device Manager.
The reason for this issue in the first place is most certainly due to the way Windows XP is configured on the HP Mini 1000. Although this solution works for the 1030NR, it should also work for models in the same family that contain the 2-in-1 SD card reader. HP really needs to provide an official fix for this issue, preferably a "patch" that re-establishes the linkage between recognized hardware devices and the internal Windows XP driver repository. Their official support suggestion of doing a complete System Restore to solve the problem is impractical, heavy handed, and may in fact not solve the issue.
It took me nearly 5 hours total to resolve this problem. I hope this post saves somebody both time and trouble.

C:\Windows is the default folder for the Windows XP installation on the 1030nr. Unless changed during installation, all PC's (not just mini's) that have XP installed will have this folder present. As for the inf folder specifically, this is hidden from view in Windows Explorer unless you tick the option to "Show Hidden Files and Folders" from Tools - Folder Options - View tab.
Still, you shouldn't need to "see" this folder for the above instructions to work. When running the "Found New Hardware" wizard, you can just type the path in manually at the appropriate spot. If you truly do not have a C:\Windows\inf folder, then it sounds like something is wrong with your Windows installation and a full System Recovery may be the best option. It might be a good idea to contact HP support first before donig that though.
Does your Mini run Windows? If not, unfortunately the instructions I laid out above will not help you. I believe the "other" Mini's run some HP customized version of Ubuntu Linux. For that OS, you'll need to obtain a driver specifically for it to get the card reader working. Try the HP site for a download for the SD card reader or contact support.
Message Edited by neildittmar on 05-11-2009 03:42 AM

Bug in New Editor?

Hi,
We have been upgrading from 4.7 to ECC6 . Currently we are collecting various bugs related SE38 Editor, If anybody face any bugs related new SE38 editor. Please paste it here. Your response will much helpful to me to create a list of bugs in editor.
Your help is appreciated.
Thanks
a®

Hi,
I am giving few more thread related to this , May this will be useful for others also.
a®

Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

Hi I am facing some bug in new Firmware V50.0.005
1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart your phone to close that radio application. (no other go)
If any Solution is there for this please let me know.
Thanks in advance
Ssandesh T S

For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
For the music library:
1. Connect your 5800 to you PC in Mass Storage Mode
2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
3. Open your SD memory card/Removable Disk in My Computer on PC
4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Bug in new firmware 7.0 for 6300 cannot create per...

There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
I am not able to create access point which is necessary to access internet with java applications.
When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
Then i go back and there is no new access point. In previous version of firmware it created access point.
Do anyone know about this issue ?
How can I tell to Nokia support that there is this bug ?
thanx for replies

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Web services entry in the JDeveloper "New Gallery" Wizard not showing all

Hi all,
I just started development to call a web service using jdev 10.1.3.1.3984 ADF BC from the backing bean of a jsf page. Following the "How-to access username and password protected Java EE Web services from ADF" by Frank Nimphius, I started to create the Web service data control project from the Web services entry in the JDev "New Gallery" wizard. From the >Business Tier>Web Services>, the only "Available Items" is UDDI Registry Connection. When I select "All Items", all the other items show as unavailable.
How do I make available all the other items?
Thanks in advance,
Paul.

Yes, I did. I created a new application as "ADFWithWebServices" and then tried to create the "WebServicesDataControlModel" and the wizard showed the items as unavailable.

How can I add new event handler in BC4J event flow in UIX?

How can I declarativly add extension to existing event handleres in BC4J+UIX page?
I generate through wizards UIX+BC4J pages and I want extend some actions in eventhandlers section. Can I do it in some way like <event name=".." method=".." class=".."> like in any regular event handlers?

you can use the <method ..> event handler inside the BC4J event handlers, like:
<bc4j:findRootAppModule name="EmpAppModule" >
<bc4j:findViewObject name="CurrentDeptEmpsVO" >
<method class="myPackage.myClass" method="doOperation"/>
</bc4j:findViewObject>
</bc4j:findRootAppModule>

Fpga unexpected error reported from new vi wizard

When i use the new vi wizard , select a new fpga project -> R-series on RT pxi -> create new system
I get a pop up saying unexpected error. I have tried a repair to no avail. I have LV2010 and am looking to use a PXI-7813R
many thanks in advance
Please remember to accept any solutions and give kudos, Thanks
LV 8.6.1, LV2010,LV2011SP1, FPGA, Win7

Hi joedowdle,
Sorry to hear that you're having issues creating an FPGA project.
To prevent this error occurring, it seems that one option that has previously been successful, was to uninstall and reinstall LabVIEW and the additional modules. I do appreciate that this would be rather time consuming, so I would like to try some additional troubleshooting steps with yourself first.
Have you been able to successfully create a standard LabVIEW project without it crashing? If so, could you please try to manually add your R-series card to it please?
On a similar note, are you able to successfully run an R-series example project? You can find one of these through LabVIEW >> Help >> Find Examples. And in the example finder go to Hardware Input and Output >> R Series >> Basic I/O, then select an example.
There are some additional steps that I'd recommend having a look at, in the R-Series user manual which I think is really useful for both explaining where your hardware should appear in the Measurement and Automation Explorer software (MAX) and how to use an example.
As you mentioned your versions of LabVIEW, FPGA and Real-Time, what version of NI-RIO do you have installed? If this is incompatible with LabVIEW 2011 and the FPGA module, this could potentially be the root of the crash. For LabVIEW 2011, you will need to have version 4.0 installed.
Best wishes,
Tori
Student

"Found New Hardward Wizard" tells me I Cannot install this hardware

When I plug my ipod in the "Found New Hardward Wizard" appears. It displays:
cannot install this hardware
An error occurred
The data is invalid
After this the ipod does not appear in My Computer, I have looked on Device Manager in Universal Serial Bus Controller but it does not appear there either.
The ipod screen lights up when connected but it will not charge. PLEASE HELP ME.

Try to use different USB ports..
Plug in the USB cable to the port first and then to the iPod adjust if necessary.
Buy or borrow another USB cable.
Try to plug the iPod into another computer
Get the newer iPods :P

Primary key in new form wizard

I tried to create a form with report using the New Form Wizards. But it seems always hidden the primary key and if I make changes to the generated form or report, I normally end up with broken pages. I found the forms in the example application are against tables with sequence backed primary key. But all our tables are not use that approach. Does anyone know any work around?
Another unrelated question about LOV? It seems the wizard require two different column to be used. If I want a list based on one column (like show all the possible value of one column), how can I do that?

<zq>
I tried to create a form with report using the New Form Wizards. But it seems always hidden the primary key and if I make changes to the generated form or report, I normally end up with broken pages. I found the forms in the example application are against tables with sequence backed primary key. But all our tables are not use that approach. Does anyone know any work around?
</zq>
<raj>
i just created a "Form with Report" and a "Form on a Table or View" using the wizards on htmldb.oracle.com which i accessed a few different ways, and they seemed to consistently expose the primary key of my table in the form. if you're referring to your primary key column in your report being rendered as an edit icon, you can change that from the report column attributes screen for your primary key column. just use the popup LOV for the "Link Text" field in the "Column Link" region of that screen to select the primary key value from your query rather than the html image tag that's there by default. also, if you'd like to, let us know what tweaks you're making to your generated forms/reports that result in errors. we should be able to help you with those, too.
i think the last part of your question above asks about using the wizards against tables that don't have sequence-backed primary keys. if so, i just did that on htmldb.oracle.com w/o issues. i might not be understanding your issue correctly, but it seems like you shouldn't have problems doing this. if so, though, please provide much more detail. we did have some issues with this stuff (and with the primary key column not being exposed as you mentioned above) in some earlier versions of html db. is it possible that you're not running of the most current version: 1.4.2.00.21 ?
</raj>
<zq>
Another unrelated question about LOV? It seems the wizard require two different column to be used. If I want a list based on one column (like show all the possible value of one column), how can I do that?
</zq>
<raj>
html db likes you to define your LOV queries using both a value to be displayed and a value to be returned to be submitted. if you'd like these values to be the same, simply select the same value twice from your table (being sure to alias the columns, which is always a good habit). so if you want to show and return all values of ename from emp, you could define your LOV query to be something like...
select ename my_display_val, ename my_return_val from emp order by 1
...and that'd do it.
</raj>
hope this helps,
raj

Add new item wizard

hi all
i have to develop a page in an enterprise portal where employees can upload files. but the provided "Add new item" wizard seems too complicated and user-unfriendly to them, since it is not IT personel and they don't have a proper command of english.
the question is: can i develop another kind interface for uploading files? is that possible to do by writing some pl/sql code or something else? can someone please give me some guide-lines or similar sample examples?

hi,
you can write your own custom add item wizard if you do not want to use the default one. the content management APIs allow you to do that. just create a UI on top of these APIs (in this particular case the add_item API).
more information on the APIs can be found in the portals developers guide:
http://download-uk.oracle.com/docs/cd/B14099_15/portal.1014/b14135/pdg_part3.htm
regards,
christian

Premiere CC 2014.1 bugs in new UI

Is anybody noticed that bugs in new Premiere UI? The first I noticed is when i use bezier curves on audio in track, the line is always strait. It shows curved when the line is near left end screen of timeline, and when you move the clip to the right then is strait again. The secound one is when i use audio effects on audio. The tab in wich is the EQ plugin is messed up and shows half of the plugin. Also the thumbnails in bins must be adjustable in much smaller size as it is now when the slider is all way down to smalest size. This new UI sucks because the fonts are too big when looked on 27" monitor.

There is a known bug in the H.264-Bluray export. I assume it has nothing to do with your issue, but perhaps it will give you something to consider.
https://forums.adobe.com/message/6848505#6848505
It appears due to a malformed xmpses file. It creates a problem on import into Encore, and I think it should do the same upon import into Architect or it would be ignored entirely. The test is to delete the xmpses file and see if that avoids the issue.

Bug in New Association Wizard [jdev903/bc4j]

Similar Messages

Maybe you are looking for