Bug in new firmware 7.0 for 6300 cannot create per...

There is bug in new firmware 7.0 for nokia 6300 and maybe all 40 series.
I am not able to create access point which is necessary to access internet with java applications.
When I go Settings -> Configuration -> Personal config.sett. -> Add -> Access point (but also if I choose any other from list)
Then i go back and there is no new access point. In previous version of firmware it created access point.
Do anyone know about this issue ?
How can I tell to Nokia support that there is this bug ?
thanx for replies

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Similar Messages

Bug in New Firmware V50.0.005 for Nokia 5800 Xpres...

Hi I am facing some bug in new Firmware V50.0.005
1) In the music library it is not showing any song.(i am having arround 500 songs in memory card)
2) If i try to refresy the library, it will not complete the process. (i.e. continuesly it will show refreshing and i have manuly stoped after 1 hour). and still no songs in all songs list.
3)While playing radio it will hang after some time.(After 15 min to half an hour). you have to restart your phone to close that radio application. (no other go)
If any Solution is there for this please let me know.
Thanks in advance
Ssandesh T S

For the radio problem, You may have to try to reinstall your firmware, or failing that, you may have to do a reset.
For the music library:
1. Connect your 5800 to you PC in Mass Storage Mode
2. On your PC you will need to have allowed to “Show” hidden files, do this from Explorer/Tools/ Folder Options/ View and select “Show hidden files and Folder”
3. Open your SD memory card/Removable Disk in My Computer on PC
4. Go to E:\ Private there you will see 3 folders 101f8857, 101ffca9 and 10281e17 .
5. Go to Private\101f8857\Cache\E there you will see .dat files. Delete all the .dat file BUT NOT the E Folder. Shown above right
6. Now go to Private\101ffca9 there you will see another .dat file, Delete the dat file NOT the folder.
7. Finally go to Private\10281e17 There you should see 4 files 2 are Mp3 files other are Podcast files. Delete mpxv2_2.db & mpxv2_2.db-journal for Mp3 files list and Delete pcv6_1.db & pcv6_1.db-journal for Podcast files list. Shown above right
8. Close all windows and disconnect your Phone. Go to Music Library and it should automatically start a refresh.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

RE1000 WPS BUG - Request New Firmware

I have noticed that when I turn off WPS in the extender, I can connect to the extender but only for 3 mins, then it connects back to the router.
I think we all need a new firmware with this bug fixed.

I am seeing this issue as well on 3 RE1000 units. We should be able to disable WPS without causing the RE1000 from losing connectivity every 40 seconds or so. The loss of connectivity only lasts about 3 seconds but that is disruptive to the functionality of the extender. I am using hardware version 1.5
Firmware
02/13/2012
Ver.1.0.02 (Build 1)
Is there an updated firmware to resolve this issue? If not I will have to return these units

N96 new firmware vs. pics for contacts

Aloha!
I have seen, that more people have same problem as me, but nowhere have I found solution.
After updating my N96 with FW 20.050 I've lost all thumbnails of pictures from my contacts list.
Is it that in new firmware you need to assign pictures to contacts only manualy? Is this a bug?
Will be grateful for any answers.

picaboodre wrote:
Yeah dude, i had the same problem. Lost all my thumnails after updating. The fullscreen images of my contacts still appear when calling someone, but the contact previews have dissappeared. After trying many methods, i just ended up manually re-assigning them. NO biggie for me really, the firmware works wonderfully for me otherwise
How do you assign them? I mean I also lost all my thumbnails after updating. But I can't see any "Add Thumbnail" option, when I enter "Edit" option in "Contacts". I used to with V12.043.
Could it be that my hard disk is now empty, therefore contains no "images." Does you hard disk have to contain a picture in order for "Add Thumbnail" option to appear in "Edit" in "Contacts"???
Thanks.

New firmware update v20 for N95 8GB

According to some sites the new firmware for the n95 8gb will have some good new features which will be out soon. here they are.
Changes/improvements made from MCU SW 15.0.015 to version 20.0.016
New features:
• Automatic Screen Rotation (ASR)
• Support for new combo memory added
Browser:
• Improvement when creating a voice call from WAP page.
• Improvements to embedded video functionality in browser.
• Sending email via browser flash plugin improvements.
Messaging:
• Mail in HTML format handling from Gmail IMAP server improved.
Connectivity:
• WLAN connection stability improvements
• BT connection stability improvements with certain BT headsets
• USB connection stability improvements
Telephony:
• Voice call handling improvements after certain type U.S.S.D message receiving.
• Stability improvements to gallery for case when there s lot of content in Gallery
• Improvements to switch application
• Voicemail icon handling improvements
Localization corrections:
• Deletion of all contacts now possible even more than 6000 contacts in phonebook
• Startup functionality improvements
Message Edited by wah007 on 01-Apr-2008 10:24 PM

05-Apr-2008 01:46 AM
jericho wrote:
So let us all hope that the sensitivity is just right or we have to wait for a new release to fix it or settle for 3rd party apps.
So, V.20 for N95-2 isnt just an april fools joke?
no its not a april fools joke. It is real.
I hope it fixes the video stuttering as my phone does that too.
Message Edited by wah007 on 05-Apr-2008 02:28 PM

WRT610N - Bugs and new firmware

I installed WRT610N under XP (original firmware, no updating), runs well: Internet OK. Storage on 500 Mb Western Digital HD OK, FTP OK, WiFi OK, Media Center OK with PS3 (Twonky work well), DDNS is OK.
Considering that: FTP a bit sluggish, FTP autentication not possible (should be sorted out by firmware B10 ?!) , People says that with "B10" it is no longer impossible to get to Twonky through port 9000.
I ask: anybody can suggest me if it is worthy to upgrade my Firmware with the latest "B15" dated 28th of Luglio ? Anybody knows anything ?
Moreover: other owners please keep in touch for info sharing, it seems the only way to get knowledge on it.
Hugs

The die is cast. I have got it. When I bought it the manufacturer has not told me that USB support is crap. In fact it works, but with some bugs.Considering LinkSys Cisco is a mayor Company, I respect them and I count they sort out understandable bugs by updated firmware.
The router is also not cheap, therefore they have an obbligation to the consumers even though the post-sales service is prompt but not qualified (sigh). I forgive them because they have sooner or later to atone for their sins.
I was referring to the forum because the most qualified people who knows where to put hands are the guys like me, and better then me, the one who spend hours to get to the service who has been promised .....(sigh again).
So, I do not accept (respectfully) Your approach.
Anyone who likes to co-operate telling me what about latest July the 28th firmware ?
Hugs

Bug in new firmware for Nokia E61

After upgrading the number shortcuts don't work. For example, on the menu, you were able to access items by pressing a number (1 = left top corner, 2= first row second column, etc). On calcium the numbers don't work. On Opera the number shortcuts don't work. The only way to get them to work is by pressing the blue key and hold it down while pressing the number. I have seen posts on different boards, some people have this bug others don't. I think it is related to upgrades for specific keyboard layouts. My layout is the the one that includes the funny spanish "n" to the right of the spacebar.

I found another bug after update. The Ctrl + CVX (Copy, Paste, Cut) doesn't work with number fields in the Contacts. I used to copy/paste numbers between contacts and/or between two field types. Copy/paste only works with text fields like FirstName, Email etc.
The audio quality improved considerably but the volume got reduced noticably. Before the update, one music video I had stored in card used to play real loud, now it is not as loud as it was before. (Not a big deal).
Updated FW and installed Mail for Exchange 1.3.0. Once configured and running, it sometimes doesn't allow me to change settings. It says - "Mail for Exchange settings page is open. Please exit open settings first". And I don't know which setting page it is referring to.

New bug in new firmware v4.0707.0.7 for n80

in most time whene i try to chageing n80 said not charging
the problem diapear whene i restat my phone and racharg it

Hi,
That is very odd.. perhaps u can try updating the software again. The new NSU client 1.3.60 has been launched.
If the issue persists,then have it checked out at a Nokia service center.
Cheers
Let me be a ripple in the silent stream of your memory ~ Viveca

Charge status LED bug in new firmware

After updating my 2nd generation iPod shuffle firmware from version 1.0.2 (which it came with) to version 1.0.4, the status LED does not correctly indicate when the battery is fully charged anymore.
According to the manual, the status LED should turn from yellow to green only after the battery has been fully charged, which takes about four hours if the battery was completey depleted. It worked that way with the original firmware.
Now with firmware 1.0.4, the LED turns to green after a little less than 90 minutes of charging the empty battery, which by then obviously isn't full yet. From runtime tests I conducted it seems that the battery has reached about 85% charge at this point.
So if you want to ensure a full charge, ignore the LED and charge the iPod shuffle for at least four hours until Apple fixes this issue.

I went to local Nokia service, and they told me that probably it was wrongly flashed. So I reinstalled firmware two more time, but it always have the same problem. Is there someone with 6300 that have the newest firmware and can test this ?
thank you
I will put this phone to service and see what they will do.

Bug with new version of itunes...cannot "see" list of movies to select for sync to iphone

Hi
Anybody have a fix for this bug....the new version of itunes is soooooo frustrating.
When trying to select specific movies for sync to ipone the window that should list all the movies available in the itnues lib disappears and i can only "see" a line where the window should be...so currently cannot add/remove movies from my iphone.
Cheers
Herman

I have the same problem on both my iPad and my iPhone and it also started with iTunes 10.0.2.

Bug in new JRE Windows installers for 8U20

Both the x86 and x64 installers add the following string to the uninstall section of the registry. This is an INSTALL string not UNINSTALL. The net effect is the package reinstalls rather than uninstalls.
MsiExec.exe /I{26A24AE4-039D-4CA4-87B4-2F83218020F0}
Pete

> Windows 10 does that scrolling over an inactive program natively btw. I know, but XMBC still helps for situations like this or potentially other programs that might not work with the built in method. There is a bug thread here for the too much scrolling issue, also links to a longer discussion: https://community.spotify.com/t5/Ongoing-Issues/Desktop-scrolls-too-fast-on-windows/idc-p/1180613#M6680

New to photoshop, looking for advice on creating a stencil design, can anyone explain how to do this

Heya,
So I'm hoping to get back into photoshop, my knowledge at the moment is pritty minimal, but i'm going to start learning how to use it again.
I'm new to this forum and don't intend to come on here often for advice but i hope that someone would be kind enough to point me in the direction that i'm looking for, i would be very grateful.
Firstly, i haven't yet decided which adobe photoshop product is best suited for what i'm looking for and i aim to go and explore the trials first to find out.
I'm looking to create designs with software that doesn't really have any limits in terms of creating designs.
I was wondering if someone could give me some links to a tutorial or something that explains how to create the stencilling effect in the image that is seen as a tree with a cityscape in the background, and possibly the other effects seen on the t-shirt. I know it might be a lot to ask but it would really mean a lot if someone could explain how you create effects like this.
Here's the image:http://www.gifts.com/products/Kohls/Mudd-Tree-Tee?p=6886:1945256129:35
I know that the image is small, it was the best i could currently find, i hope that you can still see it well enough.
Thank you in advance
I really appreciate it!!

First you may want to google »photoshop tutorial distresssed«.
As for combining images like that a combination of Blend If-settings (one can split the handles by alt-click-dragging them)), Layer Groups set to Blend Modes other than Pass Through and Grtadient Maps may be employed to maintain high editability.
One could also just use the images as Layer Masks for Solid Color Layers (and use Levels or Curves to get the intended contrast), though.

New to inDesign - looking for help with creating booklets

Looking for a tutorial/answer on how to set up my book so that the pages can be printed, folded in half (like a brochure/magazine) so that I can bind the pages myself in a book. Not sure if my page size would be what I want the finished book size to be or if I need to double the page width setup size, because I will be folding them in half to put the book together. I know there must be a magic button as well that will sort the pages and keep them in the right order, once I fold them. Does this make sense to anyone?

Hi 4boyz,
You can refer to the below mentioned links:
https://www.youtube.com/watch?v=GY16m7QcFj4
https://multimedia.nscad.ns.ca/pdfs/indesign-2%20sided%20saddle%20stich.pdf
https://www.youtube.com/watch?v=BCoTJZXkgSQ
https://helpx.adobe.com/indesign/how-to/make-brochure.html
http://www.creativebloq.com/indesign/brochure-design-4112750
InDesign Help | Creating book files
http://smallbusiness.chron.com/layout-book-indesign-27014.html
Some other links to learn Indesign:
InDesign CC tutorials | Learn how to use InDesign CC
http://tv.adobe.com/show/learn-indesign-cc/
InDesign Help | InDesign Help
http://helpx.adobe.com/pdf/indesign_reference.pdf
http://vc.uscannenberg.org/sites/vc.uscannenberg.org/files/documentation/31/Adobe%20InDesi gn%20Beginner%20Tutorial.pdf
http://ptgmedia.pearsoncmg.com/images/9780321926975/samplepages/0321926978.pdf
http://ptgmedia.pearsoncmg.com/imprint_downloads/peachpit/peachpit/academic/IDCCCIB_Instru ctor_Notes.pdf
Thanks,
Nikhil Gupta

Hello, new here and looking for suggestions on creating a conf script

Hi,
The current project that I am working on would like to make a java display window to be fully customizable from a conf script.
the java display window has 10 fields or so, which are updated every second. the java object passes to JNI, gets populated by C++ data, and returns back to java for display.
Now, how is one able to create a script that can modify that java window to display only certain fields, lets say 1-5.?
suggestions, or know of an area that i can look into?
thanks

First you may want to google »photoshop tutorial distresssed«.
As for combining images like that a combination of Blend If-settings (one can split the handles by alt-click-dragging them)), Layer Groups set to Blend Modes other than Pass Through and Grtadient Maps may be employed to maintain high editability.
One could also just use the images as Layer Masks for Solid Color Layers (and use Levels or Curves to get the intended contrast), though.

Acrobat 9.0 for Window - Cannot create PDF Printer

I can't create a printer as non of the drivers in "C:\program Files\adobe\Acrobat 9.0\Acrobat\Xtras\AdobePDF" work. Re-installing does not work either. I tried installing older verions 7 & 8, both created Adobe PDF Printer... when installing version 9 it deletes the printer.
The message I get is: PDFMaker cannot locate the Adobe PDF Printer's printer driver. Please re-insall Adobe Acrobat 9.0
Anyone have any idea how to resolve this?

Do as I do on some items. Install a utility called TypeIt4Me the go to the announcement. Copy the link. choose add clipping give it a name put / or \ at the end so it you type the same words normally it don't trigger the typeIt4Me entry. then when you need to type the words (code used) and wait for TypeIt4Me enter it. the item highlighted in my attachment is this:
http://indesignsecrets.com/acrobats-adobe-pdf-printer-replaced-in-snow-leopard.php
which is the link to the InDesign article about snow leopard and creating Adobe quality PDF's

Bug in new firmware 7.0 for 6300 cannot create per...

Similar Messages

Maybe you are looking for