Bug in production Server !!!
HI all,
There is a bug in production server. Error message i am getting is :-
"There is an IDoc in the Warehouse outbox that did not arrive in the ALE inbox of the source system."
It is a master data that gets loaded in ODS. I have checked in PSA but there is no request in that ODS. Data has not arived.
Can anyone help me to solve this bug urgently....
Hi there,
I don't think there's a bug in your system.
What the message tells you is:
BI have sent a question to a source system. The message has left BI but not reached the source systems inbox.
This is probably due to:
1. RFC connection was down at load time?
2. Not enough resources were availiable to handle the IDOCs
You should be able to re-run the load after having made sure in SM59 that everything is OK with the RFC-connections.
Why are you looking i n PSA if the request of getting data hasn't even reached the source system?
Kind regards
/martin
Similar Messages
-
Problems with assembly update in Biztalk production server
Hi.
I'm facing a problem I cannot solve about an update in one of the resources of an application in Biztalk production server.
Suddenly a bug in an application that receives messages through an external web service appeared. To find out where the bug was occurring, the orchestration was filled with many EventLogs and some other things to test. After the bug was tracked and corrected,
it was added an update in resource with the original code of orchestration, that way the EventLogs were no more logged in Event Viewer and the other things wouldn't exists in production.
Occurrs that the EventLogs are still being logged in Event Viewer. Even after the resource was added many times in server and after many resets in the host instances.
The problem aren't the logged events, are the other things that we must remove from production to avoid headaches.
There is a way to fix this? Or some better way to search a resolution for that?
I'm thinking remove the resource, reset the hosts instances, then add the resource and reset again, but for me this is very hardcore, even more in the production Server.
Usually, the deployment in production Server is made based in the import of msi files and execution of this files. The "Add -> Biztalk Assemblies" method was used this time only because was an emergency. I don't know if makes sense.
Thank you for reading, please if you have any answer or material to solve this, reply this question. If you don't understand something because of the English I'm very sorry, I'm still learning the language (and yes I use Google Translate).Rafael,
Enabling the options for GAC as you did, should GAC the components.
BizTalk uses
C:\Windows\assembly folder for assemblies. So when you import the msi with GACing options enables, ensure the assemblies are gaced in C:\Windows\assembly folder.
Otherwise, just drag and drop the assemblies from your folder to this folder. Or using command prompt
cd to c:\windows\assembly\gac_msil and copy the assembly from your folder.
Ensure you have GACed the assemblies in all the BizTalk processing machines when you more than one BizTalk machines.
Also ensure you’re restarting the correct host instances. If the artefact under the isolated host instance, ensure Application pool /IIS is restarted.
If this answers your question please mark it accordingly. If this post is helpful, please vote as helpful by clicking the upward arrow mark next to my reply. -
Check Points for production server
Hi
We are planning to update patch level of production server and Our SRM server is looking into this server. In this regards, I would like to know what are the check points in Production server after Patching up?
I want to know the main areas which may get affected due to Patch-up.
RegardsHi,
Pls keep go thru the new features that were introduced thru this patch level. Make note of the Bugs SAP has fixed with this service pack.
Keeping in view of the features and bug fixed keep track of the areas that you need to keep track of.
Its is also important to check for below things.
1. Master Data - Materials, Vendors and Users.
2. Transactional Data - SC's, PR's,PO's Confirmations, Invoices.
3. Workflow.
Regards,
Satya -
Crystal Report XI Release 2 - Deployment Bug on SQL Server
Post Author: PeterLiebich
CA Forum: General
H
We have a VS 2005 Crystal web app deployed onto a server - not using the RAS but using the Crsytal Report Viewer.
Nearly Everything is working however we have one slight bug which is driving me mad.
All of our reports are constructed against a development SQL Server, and then the Application resets the report location at run time to the Appropriate production server.
Everything works fine when I run the appliction via VS 2005 on my XP machine, the reports repoint successfully etc.
When I build the App and deploy it to a server, the CrystalReportViewer fails with a "Database logon failed" if (and only if) the name of the database that the report was developent against is the same as the name as the database is being repointed to (on a different server). If the developement and production databases have different names then the resetting of the location works fine.
As I said the repointing works fine when I run the App on my development machine which has Crystal Reports XI Release 2 installed.
On the Server I have installED the Crystal dlls via CrystalReports11_5_NET_2005.msi dated 2007/03/01.
I have also tried to deploy dlls via a GAC using CrystalReports11_5_NET_2005.msm dated 2006/02/24.
All to no avail
Here is the code I use to repoint the report
Dim crConnectionInfo As New CrystalDecisions.Shared.ConnectionInfo
crConnectionInfo.IntegratedSecurity = True
crConnectionInfo.ServerName = v_ServerName
crConnectionInfo.DatabaseName = v_DatabaseName
'loop through all the tables and pass in the connection info
Dim crTableLogOnInfo As CrystalDecisions.Shared.TableLogOnInfo
For Each crTable As CrystalDecisions.CrystalReports.Engine.Table In Me.m_ReportDocument.Database.Tables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
'set the crSections object to the current report's sections
'loop through all the sections to find all the report objects
Dim crSubreportObject As CrystalDecisions.CrystalReports.Engine.SubreportObject
Dim crSubreportDocument As CrystalDecisions.CrystalReports.Engine.ReportDocument
For Each crSection As CrystalDecisions.CrystalReports.Engine.Section In Me.m_ReportDocument.ReportDefinition.Sections
'loop through all the report objects to find all the subreports
For Each crReportObject As CrystalDecisions.CrystalReports.Engine.ReportObject In crSection.ReportObjects
If crReportObject.Kind = CrystalDecisions.Shared.ReportObjectKind.SubreportObject Then
' you will need to typecast the reportobject to a subreport object once you find it
crSubreportObject = CType(crReportObject, CrystalDecisions.CrystalReports.Engine.SubreportObject)
'open the subreport object
crSubreportDocument = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName)
'loop through all the tables in the subreport and
'apply the connection set up previously to the subreports
For Each crTable As CrystalDecisions.CrystalReports.Engine.Table In crSubreportDocument.Database.Tables
crTableLogOnInfo = crTable.LogOnInfo
crTableLogOnInfo.ConnectionInfo = crConnectionInfo
crTable.ApplyLogOnInfo(crTableLogOnInfo)
Next
End If
Next
NextPost Author: jjamcgu
CA Forum: General
Don't know if you ever found a solution, but here is how I got it to work.
1) If it was created pointing to a localhost database, it may be using named pipes to connect, where as production / test uses TCP/IP. Our CR9 system automatically switched from Named Pipes to TCP/IP but CR11 does not. Repointing the report to a non local version of the database fixed one problem of runtime switching. (This includes switching back to localhost).
2) When you change the server name, CR11 does not update the table object, but clones it and applies the update to the clone. I needed to update the location apply the update and then apply the login change (I am not using integrated security, so this may not apply to you.). See the code below. I call setServerInfo and then setLogonInfo. Sub setLogonInfo(ByRef myReport As ReportDocument)
Dim logonInfo As New TableLogOnInfo
Dim table As CrystalDecisions.CrystalReports.Engine.Table
For Each table In myReport.Database.Tables
logonInfo = table.LogOnInfo
logonInfo.ConnectionInfo.UserID = loginName
logonInfo.ConnectionInfo.Password = loginPassword
table.ApplyLogOnInfo(logonInfo)
Next table
End Sub
Sub setServerInfo(ByRef myReport As ReportDocument)
Dim logonInfo As New TableLogOnInfo
Dim table As CrystalDecisions.CrystalReports.Engine.Table
For Each table In myReport.Database.Tables
logonInfo = table.LogOnInfo
Select Case AppSettings("DataEnvironment")
Case "PRODUCTION"
logonInfo.ConnectionInfo.ServerName = "productionServer.local"
Case "TEST"
logonInfo.ConnectionInfo.ServerName = "testServer.local"
Case "LOCAL"
logonInfo.ConnectionInfo.ServerName = "localhost"
End Select
table.ApplyLogOnInfo(logonInfo)
Next table
End Sub -
Hi Gurus
I am new to BI. But, I have created BI Development and have configured all the required scenarios & created queries for getting the desired reports. Now I want to create BI Pre-Production (Quality) in Landscape and transfer all the configuration onto it. Can anybody help me (step by step) to do this ?
Thanks in advance.As you said, you want to install Pre production server.
Install the quality server. The installation guide would be available in the service market place website. follow up that.
After that upgrade your kernel level, Support package level to the latest and setup STMS transport management system configuration in quality server.
Make your development server as a domain controller and add your quality and production servers in the transport configuration.
After all the STMS setup is done, transport the queries, reports and all the developement work that you have done in developement server.
Test the queries and everything in quality. once it is fine and bug free move it to production.
Hope this would you give some clear pic. -
TNS-12518 in a production server
Hi ,
iam frequently getting the below error in my production server
Oracle 10.2.0.4 on windows 32 bit.
TNS-12518: TNS:listener could not hand off client connectionplease find the error messages in the listener.log file
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:29 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=D:\Program?Files\robert\Organ\app?srvr\robert.LDP.Tester.flush.exe)(HOST=PWAPP)(USER=LDAPSRVR))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.6)(PORT=4505)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:29 * service_update * xcem * 0
14-JUN-2011 21:40:35 * service_update * xcem * 0
14-JUN-2011 21:40:41 * service_update * xcem * 0
14-JUN-2011 21:40:43 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=D:\Program?Files\robert\Organ\app?srvr\instruction_service.exe)(HOST=PWAPP)(USER=LDAPSRVR))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.6)(PORT=4506)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:43 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=D:\Program?Files\robert\Organ\app?srvr\op_event.exe)(HOST=PWAPP)(USER=LDAPSRVR))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.6)(PORT=4507)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:54 * ping * 0
14-JUN-2011 21:40:54 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=SYSTEM))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=PWORA)(PORT=1521)))(VERSION=169870080)) * status * 0
14-JUN-2011 21:40:56 * ping * 0
14-JUN-2011 21:40:57 * (CONNECT_DATA=(CID=(PROGRAM=)(HOST=)(USER=SYSTEM))(COMMAND=status)(ARGUMENTS=64)(SERVICE=(ADDRESS=(PROTOCOL=TCP)(HOST=PWORA)(PORT=1521)))(VERSION=169870080)) * status * 0
14-JUN-2011 21:40:59 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=D:\Program?Files\robert\fame\AdvancedFormulaManager\Lib\LMSViewData.exe)(HOST=PWAFM)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.9)(PORT=2406)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:59 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=D:\Program?Files\robert\fame\AdvancedFormulaManager\Lib\AMAN_Cal_Sum_NearMiss.exe)(HOST=PWAFM)(USER=SYSTEM))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.9)(PORT=2407)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:40:59 * service_update * xcem * 0
14-JUN-2011 21:41:05 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=PWWEB)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.7)(PORT=4488)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:41:05 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=PWWEB)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.7)(PORT=4489)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connection
TNS-12560: TNS:protocol adapter error
14-JUN-2011 21:41:05 * (CONNECT_DATA=(SERVICE_NAME=xcem)(CID=(PROGRAM=c:\windows\system32\inetsrv\w3wp.exe)(HOST=PWWEB)(USER=NETWORK?SERVICE))) * (ADDRESS=(PROTOCOL=tcp)(HOST=10.133.220.7)(PORT=4490)) * establish * xcem * 12518
TNS-12518: TNS:listener could not hand off client connectionCheck the
1. Oracle process memory consumption OR
2. overall system memory consumption of database server
at the time when you hit this error.
In case of #1, if the memory consumption is greater than 1.7GB and you do not have the /3GB switch in the boot.ini (2.7GB with /3GB in place), then you will encounter this and equivalent errors.
In case of #2, if the memory consumption is more than the physical RAM available (total) - resulting in swapping - then you will encounter this and equivalent errors.
On a side note, there could be a bug in Oracle 10.2.0.4 for Windows 32 bit platform so do check MOS for details. -
Cannot see Business Objects Repository in SAP production server from Worskpace - SMP 2.3
Hi all,
I have problems with reading RFC from production server, because BOR isn't visible at all in Mobile Workspace. Maybe I do something wrong so let me explain what am trying to accomplish. I need to make applications work on production server. Until now they worked and were tested on development server. Applications are native Android with MBO (SMP 2.3.3). So my guess is that I need to transport RFC functions from development to production, which I did, then to make new connection to production server in workspace and generate MBOs and code from them that will finally replace the old MBO code in Android application. If that is the procedure, then the only problem is that I can't see those RFC in production. My user have sap all privileges and in them S_RFC authorization object so I guess authorization isn't the problem. I also tried to switch the language in workspace connection because last time (on development) that was the problem. Any idea somebody?Well there is only one mobile server. I don't know exactly how they (client) think it will work but when I say production server I refer to SAP EIS production server.
Anyway the solution to the problem with BOR visibility is this note:
Note 706195 - BAPIs are missing in the component hierarchy display
Thanks Midhun! I will probably have more questions.. -
Need help in writinf a stop script for a production server
can somebody help me with a stop script which stops a jrun
production server.
jrun -stop production
this command should work but how do i use this in a script .
ThanksHi,
I highly recommend that you skip VBScript and learn PowerShell instead. This is pretty trivial in PowerShell:
If ($env:COMPUTERNAME.Length -le 15) {
# Do stuff
# HINT: Look into Start-Service
Write-Host "Under limit: $env:COMPUTERNAME"
} Else {
# Do optional stuff
Write-Host "Over limit: $env:COMPUTERNAME"
(OT: jrv - happy? =])
If you must stick with VBScript for some odd reason, here's an example to get you started:
Set wshNetwork = WScript.CreateObject( "WScript.Network" )
strComputerName = wshNetwork.ComputerName
If Len(strComputerName) <= 15 Then
'Do stuff here when the name is short enough
WScript.Echo "Under limit: " & strComputerName
Else
'Do stuff here when the name is too long (only if you want to)
WScript.Echo "Over limit: " & strComputerName
End If
http://www.activexperts.com/activmonitor/windowsmanagement/adminscripts/services/
Don't retire TechNet! -
(Don't give up yet - 12,830+ strong and growing) -
LOGO IS NOT COMING IN SCRIPT IN PRODUCTION SERVER ONLY
Dear all,
i had modify a std script for payment advice for FI module. my problem is that the company logo is not coming in form after execting it from tcode f-58 in production server only.
i checked that graphics object in se78 in prod.sever , it is present there. the thing is that the logo is coming in the form when i executing it from development sever. can any body tell where is the problem.
thanks
BanajaHi,
May be you have changed the form in DEV and in PRD your print program is still calling the std form and not the new (z-form).
Might be a good idea to check that in t-code NACE !
Let us know if this solves your problem.
Regards
Hrishi -
Why This Report Not Working in Production Server But in Development Server
I just need your help in solving one issue. There is one report which is working fine in development server but it is not getting executed in production server.
Although the code is same in both the server. Could you please guide me in locating the problem. I am attaching that report with this mail. Please do the needful help.
TABLES : a363,
mara,
marc,
makt,
ekko,
ekpo,
mkpf,
mseg,
konp,
konh.
SELECTION-SCREEN
SELECTION-SCREEN : BEGIN OF BLOCK cst WITH FRAME TITLE text-001.
SELECT-OPTIONS : s_matnr FOR mara-matnr, "Material Number
s_lifnr FOR ekko-lifnr, "Account Number of the Vendor
s_bedat FOR ekko-bedat, "Purchasing Document Date
s_kschl FOR konh-kschl OBLIGATORY NO INTERVALS, "Condition type
s_bwart FOR mseg-bwart OBLIGATORY NO INTERVALS. "Movement Type (Inventory Management)
PARAMETERS : p_werks LIKE marc-werks OBLIGATORY. "Plant
SELECTION-SCREEN : END OF BLOCK cst.
INCLUDES
INCLUDE zalv_data.
DATA - INTERNAL TABLES AND FIELD LISTS
DATA : BEGIN OF a363_itab OCCURS 0,
matnr LIKE a363-matnr, "Material Number
lifnr LIKE a363-lifnr, "Account Number of the Vendor
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
knumh LIKE a363-knumh, "Condition record number
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
END OF a363_itab.
DATA : BEGIN OF konp_itab OCCURS 0,
knumh LIKE a363-knumh, "Condition record number
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
lifnr LIKE a363-lifnr, "Account Number of the Vendor
END OF konp_itab.
DATA : BEGIN OF ekko_itab OCCURS 0,
ebeln LIKE ekko-ebeln, "Purchasing Document Number
lifnr LIKE ekko-lifnr, "Account Number of the Vendor
bedat LIKE ekko-bedat, "Purchasing Document Date
END OF ekko_itab.
DATA : BEGIN OF ekpo_itab OCCURS 0,
ebeln LIKE ekpo-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
matnr LIKE ekpo-matnr, "Material Number
werks LIKE ekpo-werks, "Plant
menge LIKE ekpo-menge, "Purchase order quantity
END OF ekpo_itab.
DATA : BEGIN OF v_po_det OCCURS 0, "VENDOR + PLANT + PO DEATILS
lifnr LIKE ekko-lifnr, "Account Number of the Vendor
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
werks LIKE ekpo-werks, "Plant
menge LIKE ekpo-menge, "Purchase order quantity
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
END OF v_po_det.
DATA : BEGIN OF mseg_itab OCCURS 0,
mblnr LIKE mseg-mblnr, "Number of Material Document
ebeln LIKE mseg-ebeln, "Purchasing Document Number
ebelp LIKE mseg-ebelp, "Item Number of Purchasing Document
matnr LIKE mseg-matnr, "Material Number
lifnr LIKE mseg-lifnr, "Account Number of the Vendor
werks LIKE mseg-werks, "Plant
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
END OF mseg_itab.
DATA : BEGIN OF mkpf_itab OCCURS 0,
mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
END OF mkpf_itab.
DATA : BEGIN OF zeou_pcrdtl_itab OCCURS 0,
matnr LIKE zeou_pcrdtl-matnr, "Material Number
lifnr LIKE zeou_pcrdtl-lifnr, "Account Number of the Vendor
mblnr LIKE zeou_pcrdtl-mblnr, "Number of Material Document
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
END OF zeou_pcrdtl_itab.
DATA : BEGIN OF gr_wh_info OCCURS 0, "INFO OF GR & WH BASED ON MVMT TYPE & PO
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
ebeln LIKE mseg-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
matnr LIKE mseg-matnr, "Material Number
lifnr LIKE mseg-lifnr, "Account Number of the Vendor
werks LIKE mseg-werks, "Plant
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
END OF gr_wh_info.
DATA : BEGIN OF bseg_itab OCCURS 0,
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
bukrs LIKE bseg-bukrs, "Company Code
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
END OF bseg_itab.
DATA : BEGIN OF bkpf_itab OCCURS 0,
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
bldat LIKE bkpf-bldat, "Document Date in Document
END OF bkpf_itab.
DATA : BEGIN OF vend_inv OCCURS 0, "VENDOR INVOICE DETAILS
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
bukrs LIKE bseg-bukrs, "Company Code
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
bldat LIKE bkpf-bldat, "Document Date in Document
END OF vend_inv.
DATA : BEGIN OF chckinit OCCURS 0, "CHEQUE INIT INFO
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
END OF chckinit.
DATA : BEGIN OF chckpayer OCCURS 0, "CHEQUE BANK DETAILS
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
gjahr LIKE payr-gjahr, "Fiscal Year
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF chckpayer.
DATA : chckpayer_u LIKE chckpayer OCCURS 0 WITH HEADER LINE. "UNIQUE CHEQUE DETAILS
DATA : BEGIN OF chckfinal OCCURS 0, "CHEQUE FINAL INFO
ebeln LIKE bseg-ebeln, "Purchasing Document Number
ebelp LIKE bseg-ebelp, "Item Number of Purchasing Document
matnr LIKE bseg-matnr, "Material Number
lifnr LIKE bseg-lifnr, "Account Number of the Vendor
werks LIKE bseg-werks, "Plant
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
bukrs LIKE bkpf-bukrs, "Company Code
belnr LIKE bkpf-belnr, "Accounting Document Number
gjahr LIKE bkpf-gjahr, "Fiscal Year
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF chckfinal.
DATA : BEGIN OF mat_desc OCCURS 0,
matnr LIKE mara-matnr,
maktx LIKE makt-maktx,
END OF mat_desc.
DATA : BEGIN OF vend_det OCCURS 0,
lifnr LIKE lfa1-lifnr,
name1 LIKE lfa1-name1,
j_1icstno LIKE j_1imovend-j_1icstno,
END OF vend_det.
DATA : BEGIN OF cst_rep OCCURS 0, "FINAL CST REPORT
lifnr LIKE a363-lifnr, "Account Number of the Vendor
name1 LIKE lfa1-name1, "Vendor Name
j_1icstno LIKE j_1imovend-j_1icstno, " Vendor CST No.
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description.
kbetr LIKE konp-kbetr, "Rate (condition amount or percentage) where no scale exists
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
cst_dmbtr LIKE mseg-dmbtr, "CST Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
cst_wrbtr LIKE bseg-wrbtr, "CST Amount in document currency
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
END OF cst_rep.
DATA : BEGIN OF gt_output OCCURS 0, "ALV OUTPUT
slno LIKE sy-tabix, "Serial Number
lifnr LIKE a363-lifnr, "Account Number of the Vendor
name1 LIKE lfa1-name1, "Vendor Name
j_1icstno LIKE j_1imovend-j_1icstno, " Vendor CST No.
werks LIKE a363-werks, "Plant
kschl LIKE a363-kschl, "Condition type
ebeln LIKE ekko-ebeln, "Purchasing Document Number
ebelp LIKE ekpo-ebelp, "Item Number of Purchasing Document
bedat LIKE ekko-bedat, "Purchasing Document Date
matnr LIKE ekpo-matnr, "Material Number
maktx LIKE makt-maktx, "Material Description
mblnr LIKE mseg-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document
menge LIKE mseg-menge, "Quantity
dmbtr LIKE mseg-dmbtr, "Amount in local currency
cst_dmbtr LIKE mseg-dmbtr, "CST Amount in local currency
bwart LIKE mseg-bwart, "Movement Type (Inventory Management)
whssn LIKE zeou_pcrdtl-whssn, "Warehouse Records Entry Serial No.
whsdt LIKE zeou_pcrdtl-whsdt, "Warehouse Records Entry date
buzid LIKE bseg-buzid, "Identification of the Line Item
bschl LIKE bseg-bschl, "Posting Key
wrbtr LIKE bseg-wrbtr, "Amount in document currency
cst_wrbtr LIKE bseg-wrbtr, "CST Amount in document currency
belnr LIKE bseg-belnr, "Accounting Document Number
gjahr LIKE bseg-gjahr, "Fiscal Year
xblnr LIKE bkpf-xblnr, "Reference Document Number
koart LIKE bseg-koart, "Account type
augbl LIKE bseg-augbl, "Document Number of the Clearing Document
vblnr LIKE payr-vblnr, "Document Number of the Payment Document
zbukr LIKE payr-zbukr, "Paying company code
chect LIKE payr-chect, "Check Number
zaldt LIKE payr-zaldt, "Probable Payment Date (Cash Discount 1 Due)
hbkid LIKE payr-hbkid, "Short key for a house bank
usr_txt1(20) TYPE c,
usr_txt2(20) TYPE c,
END OF gt_output.
*Working Variables
DATA : cst_gr LIKE mseg-dmbtr,
cst_inv LIKE bseg-wrbtr,
usr_txt1(20) TYPE c,
usr_txt2(20) TYPE c.
START-OF-SELECTION.
*Retreiving Data from a363 table for the given input
SELECT matnr
lifnr
werks
kschl
knumh
FROM a363
INTO TABLE a363_itab
WHERE matnr IN s_matnr AND lifnr IN s_lifnr AND werks EQ p_werks AND kschl IN s_kschl.
SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh.
LOOP AT a363_itab.
READ TABLE konp_itab WITH KEY knumh = a363_itab-knumh.
IF sy-subrc EQ 0.
MOVE : konp_itab-kbetr TO a363_itab-kbetr.
MODIFY a363_itab.
ENDIF.
CLEAR : a363_itab, konp_itab.
ENDLOOP.
SELECT *
FROM makt
INTO CORRESPONDING FIELDS OF TABLE mat_desc
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr.
SELECT a~lifnr
a~name1
b~j_1icstno
INTO TABLE vend_det
FROM lfa1 AS a JOIN j_1imovend AS b
ON alifnr EQ blifnr
FOR ALL ENTRIES IN a363_itab
WHERE a~lifnr EQ a363_itab-lifnr.
Retreiving Data from EKKO & EKPO table for the given input
And Populating the V_PO_DETAILS itab
SELECT *
FROM ekko
INTO CORRESPONDING FIELDS OF TABLE ekko_itab
FOR ALL ENTRIES IN a363_itab
WHERE lifnr EQ a363_itab-lifnr AND bedat IN s_bedat.
SELECT *
FROM ekpo
INTO CORRESPONDING FIELDS OF TABLE ekpo_itab
FOR ALL ENTRIES IN a363_itab
WHERE matnr EQ a363_itab-matnr AND werks EQ a363_itab-werks AND mwskz NE 'V0'.
LOOP AT ekpo_itab.
MOVE : ekpo_itab-ebelp TO v_po_det-ebelp,
ekpo_itab-matnr TO v_po_det-matnr,
ekpo_itab-werks TO v_po_det-werks,
ekpo_itab-menge TO v_po_det-menge.
READ TABLE ekko_itab WITH KEY ebeln = ekpo_itab-ebeln.
IF sy-subrc EQ 0.
MOVE : ekko_itab-lifnr TO v_po_det-lifnr,
ekko_itab-ebeln TO v_po_det-ebeln,
ekko_itab-bedat TO v_po_det-bedat.
APPEND : v_po_det.
ENDIF.
CLEAR : ekko_itab, ekpo_itab, v_po_det.
ENDLOOP.
LOOP AT v_po_det.
READ TABLE a363_itab WITH KEY matnr = v_po_det-matnr lifnr = v_po_det-lifnr werks = v_po_det-werks.
IF sy-subrc EQ 0.
MOVE : a363_itab-kbetr TO v_po_det-kbetr.
MODIFY v_po_det.
ENDIF.
CLEAR : a363_itab, v_po_det.
ENDLOOP.
Retreiving Data from MKPF & MSEG & ZEOU_PCRDTL table for the given input
And Populating the GR_WH_info itab
SELECT *
FROM mseg
INTO CORRESPONDING FIELDS OF TABLE mseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND bwart IN s_bwart.
SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.
SELECT *
FROM zeou_pcrdtl
INTO CORRESPONDING FIELDS OF TABLE zeou_pcrdtl_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr AND matnr EQ mseg_itab-matnr.
LOOP AT mseg_itab.
MOVE : mseg_itab-mblnr TO gr_wh_info-mblnr,
mseg_itab-ebeln TO gr_wh_info-ebeln,
mseg_itab-ebelp TO gr_wh_info-ebelp,
mseg_itab-matnr TO gr_wh_info-matnr,
mseg_itab-lifnr TO gr_wh_info-lifnr,
mseg_itab-werks TO gr_wh_info-werks,
mseg_itab-menge TO gr_wh_info-menge,
mseg_itab-dmbtr TO gr_wh_info-dmbtr,
mseg_itab-bwart TO gr_wh_info-bwart.
READ TABLE mkpf_itab WITH KEY mblnr = mseg_itab-mblnr.
IF sy-subrc EQ 0.
MOVE : mkpf_itab-bldat TO gr_wh_info-bldat.
ENDIF.
READ TABLE zeou_pcrdtl_itab WITH KEY mblnr = mseg_itab-mblnr.
IF sy-subrc EQ 0.
MOVE : zeou_pcrdtl_itab-whssn TO gr_wh_info-whssn,
zeou_pcrdtl_itab-whsdt TO gr_wh_info-whsdt.
ENDIF.
APPEND : gr_wh_info.
CLEAR : mseg_itab, mkpf_itab, gr_wh_info.
ENDLOOP.
Retreiving Data from BSEG & BKPF table
And Populating the Vendor Invoice Details
SELECT *
FROM bseg
INTO CORRESPONDING FIELDS OF TABLE bseg_itab
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '96'.
SELECT *
FROM bkpf
INTO CORRESPONDING FIELDS OF TABLE bkpf_itab
FOR ALL ENTRIES IN bseg_itab
WHERE bukrs EQ bseg_itab-bukrs AND belnr EQ bseg_itab-belnr AND gjahr EQ bseg_itab-gjahr.
LOOP AT bseg_itab.
MOVE : bseg_itab-ebeln TO vend_inv-ebeln,
bseg_itab-ebelp TO vend_inv-ebelp,
bseg_itab-matnr TO vend_inv-matnr,
bseg_itab-lifnr TO vend_inv-lifnr,
bseg_itab-werks TO vend_inv-werks,
bseg_itab-buzid TO vend_inv-buzid,
bseg_itab-bschl TO vend_inv-bschl,
bseg_itab-wrbtr TO vend_inv-wrbtr,
bseg_itab-bukrs TO vend_inv-bukrs,
bseg_itab-belnr TO vend_inv-belnr,
bseg_itab-gjahr TO vend_inv-gjahr.
READ TABLE bkpf_itab WITH KEY bukrs = bseg_itab-bukrs belnr = bseg_itab-belnr gjahr = bseg_itab-gjahr.
IF sy-subrc EQ 0.
MOVE : bkpf_itab-xblnr TO vend_inv-xblnr,
bkpf_itab-bldat TO vend_inv-bldat.
APPEND : vend_inv.
ENDIF.
CLEAR : vend_inv, bseg_itab, bkpf_itab.
ENDLOOP.
Retreiving Data from BSEG & BKPF table
And Populating the Cheque Info Details
SELECT *
FROM bseg
INTO CORRESPONDING FIELDS OF TABLE chckinit
FOR ALL ENTRIES IN v_po_det
WHERE ebeln EQ v_po_det-ebeln AND matnr EQ v_po_det-matnr AND buzid EQ 'W' AND bschl EQ '86' AND koart EQ 'K'.
SELECT *
FROM payr
INTO CORRESPONDING FIELDS OF TABLE chckpayer
FOR ALL ENTRIES IN chckinit
WHERE vblnr EQ chckinit-augbl.
SORT chckpayer BY vblnr DESCENDING.
LOOP AT chckpayer.
ON CHANGE OF chckpayer-vblnr.
MOVE : chckpayer TO chckpayer_u.
APPEND : chckpayer_u.
CLEAR : chckpayer_u, chckpayer.
ENDON.
ENDLOOP.
LOOP AT chckinit.
MOVE : chckinit-ebeln TO chckfinal-ebeln,
chckinit-ebelp TO chckfinal-ebelp,
chckinit-matnr TO chckfinal-matnr,
chckinit-lifnr TO chckfinal-lifnr,
chckinit-werks TO chckfinal-werks,
chckinit-buzid TO chckfinal-buzid,
chckinit-bschl TO chckfinal-bschl,
chckinit-bukrs TO chckfinal-bukrs,
chckinit-gjahr TO chckfinal-gjahr,
chckinit-koart TO chckfinal-koart,
chckinit-augbl TO chckfinal-augbl.
READ TABLE chckpayer_u WITH KEY vblnr = chckinit-augbl gjahr = chckinit-gjahr.
IF sy-subrc EQ 0.
MOVE : chckpayer_u-vblnr TO chckfinal-vblnr,
chckpayer_u-zbukr TO chckfinal-zbukr,
chckpayer_u-chect TO chckfinal-chect,
chckpayer_u-zaldt TO chckfinal-zaldt,
chckpayer_u-hbkid TO chckfinal-hbkid.
APPEND : chckfinal.
ENDIF.
CLEAR : chckfinal, chckpayer_u, chckinit.
ENDLOOP.
Populating the final CST TABLE
LOOP AT v_po_det.
MOVE : v_po_det-lifnr TO cst_rep-lifnr,
v_po_det-werks TO cst_rep-werks,
v_po_det-ebeln TO cst_rep-ebeln,
v_po_det-ebelp TO cst_rep-ebelp,
v_po_det-bedat TO cst_rep-bedat,
v_po_det-matnr TO cst_rep-matnr,
v_po_det-kbetr TO cst_rep-kbetr.
READ TABLE gr_wh_info WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : gr_wh_info-mblnr TO cst_rep-mblnr,
gr_wh_info-bldat TO cst_rep-bldat,
gr_wh_info-menge TO cst_rep-menge,
gr_wh_info-dmbtr TO cst_rep-dmbtr,
gr_wh_info-bwart TO cst_rep-bwart,
gr_wh_info-whssn TO cst_rep-whssn,
gr_wh_info-whsdt TO cst_rep-whsdt.
ENDIF.
READ TABLE vend_inv WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : vend_inv-buzid TO cst_rep-buzid,
vend_inv-bschl TO cst_rep-bschl,
vend_inv-wrbtr TO cst_rep-wrbtr,
vend_inv-belnr TO cst_rep-belnr,
vend_inv-gjahr TO cst_rep-gjahr,
vend_inv-xblnr TO cst_rep-xblnr.
ENDIF.
READ TABLE chckfinal WITH KEY ebeln = v_po_det-ebeln ebelp = v_po_det-ebelp."matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : chckfinal-augbl TO cst_rep-augbl,
chckfinal-vblnr TO cst_rep-vblnr,
chckfinal-zbukr TO cst_rep-zbukr,
chckfinal-chect TO cst_rep-chect,
chckfinal-zaldt TO cst_rep-zaldt,
chckfinal-hbkid TO cst_rep-hbkid.
ENDIF.
READ TABLE mat_desc WITH KEY matnr = v_po_det-matnr.
IF sy-subrc EQ 0.
MOVE : mat_desc-maktx TO cst_rep-maktx.
ENDIF.
READ TABLE vend_det WITH KEY lifnr = v_po_det-lifnr.
IF sy-subrc EQ 0.
MOVE : vend_det-name1 TO cst_rep-name1,
vend_det-j_1icstno TO cst_rep-j_1icstno.
ENDIF.
APPEND : cst_rep.
CLEAR : cst_rep, v_po_det, gr_wh_info, vend_inv, chckfinal.
ENDLOOP.
Populating GT_output
LOOP AT cst_rep.
cst_gr = cst_rep-dmbtr * ( cst_rep-kbetr / 1000 ).
cst_inv = cst_rep-wrbtr * ( cst_rep-kbetr / 1000 ).
MOVE : cst_gr TO cst_rep-cst_dmbtr,
cst_inv TO cst_rep-cst_wrbtr.
MODIFY : cst_rep.
CLEAR : cst_rep, cst_gr, cst_inv.
ENDLOOP.
LOOP AT cst_rep.
MOVE : sy-tabix TO gt_output-slno,
cst_rep-lifnr TO gt_output-lifnr,
cst_rep-name1 TO gt_output-name1,
cst_rep-j_1icstno TO gt_output-j_1icstno,
cst_rep-werks TO gt_output-werks,
cst_rep-matnr TO gt_output-matnr,
cst_rep-maktx TO gt_output-maktx,
cst_rep-ebeln TO gt_output-ebeln,
cst_rep-ebelp TO gt_output-ebelp,
cst_rep-bedat TO gt_output-bedat,
cst_rep-mblnr TO gt_output-mblnr,
cst_rep-bldat TO gt_output-bldat,
cst_rep-menge TO gt_output-menge,
cst_rep-dmbtr TO gt_output-dmbtr,
cst_rep-cst_dmbtr TO gt_output-cst_dmbtr,
cst_rep-bwart TO gt_output-bwart,
cst_rep-whssn TO gt_output-whssn,
cst_rep-whsdt TO gt_output-whsdt,
cst_rep-buzid TO gt_output-buzid,
cst_rep-bschl TO gt_output-bschl,
cst_rep-wrbtr TO gt_output-wrbtr,
cst_rep-cst_wrbtr TO gt_output-cst_wrbtr,
cst_rep-belnr TO gt_output-belnr,
cst_rep-gjahr TO gt_output-gjahr,
cst_rep-xblnr TO gt_output-xblnr,
cst_rep-augbl TO gt_output-augbl,
cst_rep-vblnr TO gt_output-vblnr,
cst_rep-zbukr TO gt_output-zbukr,
cst_rep-chect TO gt_output-chect,
cst_rep-zaldt TO gt_output-zaldt,
cst_rep-hbkid TO gt_output-hbkid.
APPEND gt_output.
CLEAR : cst_rep, gt_output, sy-tabix.
ENDLOOP.
END-OF-SELECTION.
*-ALV Routine
PERFORM alv_forms.
*& Form alv_forms
FORM alv_forms.
PERFORM alv_routines.
gx_variant = sy-repid.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
EXPORTING
i_save = g_save
CHANGING
cs_variant = gx_variant
EXCEPTIONS
not_found = 2.
IF sy-subrc = 0.
vari = gx_variant-variant.
ENDIF.
PERFORM comment_build USING gt_list_top_of_page[].
PERFORM fieldcat_init USING gt_fieldcat[].
PERFORM layout_build USING gs_layout.
PERFORM print_build USING gs_print.
PERFORM alv_output.
ENDFORM. " alv_forms
*& Form alv_routines
FORM alv_routines.
PERFORM eventtab_build USING gt_events[].
PERFORM e06_t_sort_build USING gt_sort[].
PERFORM sp_group_build USING gt_sp_group[].
g_save = 'A'.
PERFORM variant_init.
ENDFORM. " alv_routines
*& Form eventtab_build
FORM eventtab_build USING p_gt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = p_gt_events.
READ TABLE p_gt_events WITH KEY name = slis_ev_top_of_page
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_top_of_page TO ls_event-form.
APPEND ls_event TO p_gt_events.
ENDIF.
READ TABLE p_gt_events WITH KEY name = slis_ev_user_command
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_user_command TO ls_event-form.
APPEND ls_event TO p_gt_events.
ENDIF.
READ TABLE p_gt_events WITH KEY name = slis_ev_pf_status_set
INTO ls_event.
IF sy-subrc = 0.
MOVE slis_ev_pf_status_set TO ls_event-form.
APPEND ls_event TO p_gt_events.
ENDIF.
SORT p_gt_events BY name.
DELETE ADJACENT DUPLICATES FROM p_gt_events.
DELETE p_gt_events WHERE form IS INITIAL.
ENDFORM. " eventtab_build
*& Form sort_build
FORM e06_t_sort_build USING e06_lt_sort TYPE slis_t_sortinfo_alv.
DATA: ls_sort TYPE slis_sortinfo_alv.
CLEAR ls_sort.
ls_sort-fieldname = 'SLNO'.
ls_sort-spos = 1.
ls_sort-up = 'X'.
APPEND ls_sort TO e06_lt_sort.
CLEAR ls_sort.
ls_sort-fieldname = 'CNCNR'.
ls_sort-spos = 1.
ls_sort-up = 'X'.
APPEND ls_sort TO e06_lt_sort.
CLEAR ls_sort.
ls_sort-fieldname = 'MATNR'.
ls_sort-spos = 1.
ls_sort-up = 'X'.
APPEND ls_sort TO e06_lt_sort.
ENDFORM. " sort_build
*& Form sp_group_build
FORM sp_group_build USING p_gt_sp_group TYPE slis_t_sp_group_alv.
DATA: ls_sp_group TYPE slis_sp_group_alv.
CLEAR ls_sp_group.
ls_sp_group-sp_group = 'A'.
ls_sp_group-text = 'PRODUCT'.
APPEND ls_sp_group TO p_gt_sp_group.
ENDFORM. " sp_group_build
*& Form variant_init
FORM variant_init.
CLEAR g_variant.
g_repid = sy-repid.
g_variant-report = g_repid.
ENDFORM. " variant_init
*& Form comment_build
FORM comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
DATA: l_date(10) TYPE c,
l_time(8) TYPE c,
l_out(255) TYPE c.
WRITE sy-datum TO l_date.
WRITE sy-uzeit TO l_time.
CONCATENATE l_date '/' l_time INTO l_out.
CLEAR ls_line.
ls_line-typ = 'H'.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'RUN BY :'.
ls_line-info = sy-uname.
APPEND ls_line TO e04_lt_top_of_page.
CLEAR ls_line.
ls_line-typ = 'S'.
ls_line-key = 'RUN ON :'.
ls_line-info = l_out.
APPEND ls_line TO e04_lt_top_of_page.
ENDFORM. " comment_build
*& Form fieldcat_init
FORM fieldcat_init USING e01_lt_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA n1(3).
DATA count(2) TYPE c.
DATA h1(10).
DATA: l_week LIKE scal-week,
l_text(17) TYPE c.
DATA cnt TYPE i.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = 1.
ls_fieldcat-fieldname = 'SLNO'.
ls_fieldcat-seltext_m = 'SL.NO'.
ls_fieldcat-hotspot = 'X'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'LIFNR'.
ls_fieldcat-seltext_m = 'VENDOR NO.'.
ls_fieldcat-hotspot = 'X'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'NAME1'.
ls_fieldcat-seltext_m = 'VENDOR NAME'.
ls_fieldcat-hotspot = 'X'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'L'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'J_1ICSTNO'.
ls_fieldcat-seltext_m = 'VENDOR CST NO.'.
ls_fieldcat-hotspot = 'X'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-seltext_m = 'PLANT'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'EBELN'.
ls_fieldcat-seltext_m = 'PO NO.'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cnt.
ls_fieldcat-fieldname = 'EBELP'.
ls_fieldcat-seltext_m = 'PO ITEM'.
ls_fieldcat-key = 'X'.
ls_fieldcat-key_sel = 'X'.
ls_fieldcat-just = 'R'.
ls_fieldcat-sp_group = 'A'.
APPEND ls_fieldcat TO e01_lt_fieldcat.
cnt = cnt + 1.
CLEAR ls_fieldcat.
ls_fieldcat-row_pos = 1.
ls_fieldcat-col_pos = cntHi ,
This is a sort of performance issue , because your program takes more than the max time set for the program to execute in foreground.
There are many stuff in program which will hamper your performance.
I will list down a few
1. SELECT *
FROM konp
INTO CORRESPONDING FIELDS OF TABLE konp_itab
FOR ALL ENTRIES IN a363_itab
WHERE knumh EQ a363_itab-knumh
in this statement you are using for all entries a363_itab , but before this statement you are not checking if the table has any entry or not , please do remember that for all entries has this characterstic , that if you internal table does not contain any record , then all the records are selected from the database table. So in this case if you table a363_itab is empty , so what you want is no data must be seelcted from table konp , but what will happen is all the records in KONP will be seelcted.
2. While retreiving data you are using seelct * even though you do not require all the fields , an example is
<b>SELECT *
FROM mkpf
INTO CORRESPONDING FIELDS OF TABLE mkpf_itab
FOR ALL ENTRIES IN mseg_itab
WHERE mblnr EQ mseg_itab-mblnr.</b>
in this your internal table contains only 2 fields
<b>mblnr LIKE mkpf-mblnr, "Number of Material Document
bldat LIKE mkpf-bldat, "Document Date in Document</b> , but to get these 2 fields you are selecting all the fields of the table.
3. In select you are using into corresponding fields of table , it is not a good practice., so please avoidd it.
Please understand that you must try to reduce the access to your database tables and try to keep it minimal , because this same thing may happen becasue data in DEV is very less compared to the volume of data in production , so a program working in DEV will take much more time in PRD if not written properly and may result in timeouts , as in your case.
Please try to make chanegs to the prorgam and see if it works.
In case you have more queries , please do revert back.
Regards
Arun
*Reward points if replay is helpful -
Budget Exceed Issue in work Order (P.O) in Production Server.
Hi Friends,
I am getting different type of budget exceed issue, that to only in Production server.
Here the issue is when I am creating the work order P.O (Acc.As. Cat.P, Itm Cat. D) with different service line items with respective WBSe with in the budget limit, then I am doing SES for some quantity, now when I am changing (I am decreasing not increasing) the same P.O line item available quantity and creating the new version now system is calculating the old version line item quantity + new version quantity (nothing but double) then giving budget exceed error.
One more strange thing is, if I change quantity for one line item then system is giving budget exceed error for another line item which is having the different WBSe which was saved with out giving any error at the time of P.O creation.
This issue is happening only in Production server ....same scenario I have run with the same values in both Dev. and Qau. (Where the config. is same in all 3 clients) but in both the clients it is working fine...but in production why the system is behaving in such a way I am not getting.
In the below I have given the test scenario...
Service P.O Creation
Line Item
P.O Quanity
Value
WBS
Budget
Commitment
SES. Quatity
Actual cost
1
10
100
WBS 1
2000
1000
5
500
2
20
200
Wbs 2
4000
2000
10.00
1000
3
30
300
WBS 3
6000
3000
15
1500
4
40
400
Wbs 4
8000
4000
20.00
2000
Service P.O change with new version
Line Item
P.O Quanity
Value
WBS
Budget
Commitment
SES. Quatity
Actual cost
1
6
100
WBS 1
1000
1000
5
500
2
20
200
Wbs 2
2000
2000
10.00
1000
Budget exceed with the double value
3
30
300
WBS 3
3000
3000
15
1500
4
40
400
Wbs 4
4000
4000
20.00
2000
If any one has come across with this type of issue and solved ...please suggest me ..
Regards,
SrikanthHi,
I have face similar issue in deleting PO line items.
Even though I delete items, system check budget for deleted qty with the currency conversion + value & gives budget exceed error.
In some cases we have asked user to deactivated AVAC asked to do the transaction, which is not recommended.
You can try running CJBN & CJBV in sequence for affected WBS.
Thanks & reg,
Sam -
Old SD and MM documents shall be deleted on productive server
We have the situation that the same SD and MM documents sitting on two different productive servers. This is caused due to the migration from 4.0B to 4.7 some years ago. Some of our companies were kept on 4.0B with SD and MM enviroment on a separate server and the other companies were transfered to a new server. At that ttime the new server was build as copy from the old 4.0B server and then migrated.
For the migration to ERP6.0 we like to clean up the current productive server. During the preparation we noticed that the old SD and MM documents don't fit into the new management requirements. Therefore we woudl like to get rid of it. Problem is that we will not archive these documents. Furthermore there a lot of open purchase and sales orders that can't be closed.
Question: Does anybody have a solution how we can delete all of these SD and MM documents before we migrate the server to ERP6.0?
ThanksI would use the System Landscape Optimization service for that purpose, they can provide you with tools to do those "merging" of two systems.
http://service.sap.com/slo
(It´s consulting - so $$$).
Markus -
SSO issue in the production server,com.sap.mw.jco.JCO$Exception: (103)
com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: This system rejects all logons using SSO tickets
in the production server.....
while testing the jco maintained for Ess applications.
if i go for uidpw method for modeldata destination i am getting the error. in the Ess pages that administrtor not in this peroid(administrator with which id i maintained jco destination)
if i assign one employee to the admin in pa30......for every employee getting the same details of admin)
I guess this problem with modeldata ......i should maintain the usermanagement method for modeldata jco destination is logon ticket.
while maintainig that ping is successfull but getting the above error.
it is the problem with production server.......of E.P
in dev and quality everything is working fine.
plz help me out.
thankyou
swapnaHi Swapna,
Please check the logon group properties for SAP system in t-code SMLG. If there is any issue with logon group then it might cause for this issue.
Refer to [Click here|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/user-interface-technology/wd%20java/7.0/portal%20integration/how%20to%20configure%20the%20jco%20destination%20settings.pdf] and [System Landscape Directory Process and JCo Configuration|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0c1d495-048e-2b10-babd-924a136f56b5?QuickLink=index&overridelayout=true]
Hope it will helps
Regards, Arun Jaiswal -
Error when generating the report in Production Server
Hi,
I have created one infoset query in Development server of my client. It is working fine there. I had transported the request containg this query to Production server. But whenever I am trying to generate report using this query in Production server it is giving an error message
"Error when generating the report".
I am not getting what 's problem.
SamriddhiSamriddhi,
Genarally its not suggested to transport Queries. Should be able to create Queries directly Production. There might be diferences between your Development and Production versions.
Thanks. -
Problem while deploying a WLW ear file on a WL81 production server
Hi,
I am trying to deploy a simple simple WEB service -which works fine within the
workshop 8.1 environment- on a different "production" server.
I generated manually all the JMS queues on the target database, as well as the
pointbase additional tables as specified in the documentation (based on the <wlw-manifest.xml>
file included in the ear file) .
The deployment ends with following error:
"weblogic.servlet.WlwJSPServlet" (see below).
Who could help ?
Thanks a lot
Yves
[Deployer:149033]preparing application WebServiceNAP on myserver
[Deployer:149033]failed application WebServiceNAP on myserver
[Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application
WebServiceNAP on myserver.:
Exception:weblogic.management.ApplicationException: prepare failed for WebServiceNAPWeb
Module: WebServiceNAPWeb Error: Could not load WebServiceNAPWeb: weblogic.management.DeploymentException:
[HTTP:101283]ServletContext(id=34197168,name=WebServiceNAPWeb,context-path=/WebServiceNAPWeb):
jspServlet "weblogic.servlet.WlwJSPServlet" defined in weblogic.xml could not
be loaded.
java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet
at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:198)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;(Unknown
Source)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(Unknown
Source)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:223)
at weblogic.servlet.jsp.JspConfig.isJspServletValid(Ljava.lang.String;Ljava.lang.String;Ljava.lang.ClassLoader;)Z(JspConfig.java:317)
at weblogic.servlet.internal.WebAppServletContext.registerJspServlet(Lweblogic.management.descriptors.WebDescriptorMBean;)V(WebAppServletContext.java:2517)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors(Lweblogic.management.descriptors.WebDescriptorMBean;)V(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.init(Ljava.lang.String;Lweblogic.management.descriptors.WebDescriptorMBean;Z)V(WebAppServletContext.java:583)
at weblogic.servlet.internal.WebAppServletContext.<init>(Lweblogic.servlet.internal.HttpServer;Lweblogic.management.configuration.WebAppComponentMBean;Lweblogic.servlet.internal.WebAppModule;Lweblogic.management.ApplicationContainer;Lweblogic.application.ApplicationInfo;)V(WebAppServletContext.java:511)
at weblogic.servlet.internal.HttpServer.loadWebApp(Lweblogic.management.configuration.WebAppComponentMBean;Lweblogic.management.ApplicationContainer;Lweblogic.application.ApplicationInfo;Lweblogic.servlet.internal.WebAppModule;)Lweblogic.servlet.internal.WebAppServletContext;(HttpServer.java:594)
at weblogic.servlet.internal.WebAppModule.prepare(Ljava.lang.ClassLoader;[Lweblogic.management.configuration.VirtualHostMBean;ZLjava.lang.String;)V(WebAppModule.java:623)
at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(Lweblogic.utils.classloaders.GenericClassLoader;Lweblogic.j2ee.J2EEApplicationContainer$Component;Z)V(J2EEApplicationContainer.java:2896)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules([Lweblogic.j2ee.J2EEApplicationContainer$Component;Ljava.lang.String;Z)V(J2EEApplicationContainer.java:1532)
at weblogic.j2ee.J2EEApplicationContainer.prepare([Lweblogic.j2ee.J2EEApplicationContainer$Component;[Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;)V(J2EEApplicationContainer.java:1188)
at weblogic.j2ee.J2EEApplicationContainer.prepare(Ljava.lang.String;[Lweblogic.management.configuration.ComponentMBean;[Ljava.lang.String;)V(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer()V(SlaveDeployer.java:2634)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer()Z(SlaveDeployer.java:2584)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare()V(SlaveDeployer.java:2506)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Lweblogic.management.deploy.OamVersion;Lweblogic.management.runtime.DeploymentTaskRuntimeMBean;Z)V(SlaveDeployer.java:833)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(Lweblogic.management.deploy.OamDelta;Lweblogic.management.deploy.OamVersion;Z)Z(SlaveDeployer.java:542)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(Ljava.util.ArrayList;Z)V(SlaveDeployer.java:500)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(Lweblogic.kernel.ExecuteThread;)V(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:170)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
- with nested exception:
[java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet]Looks like Raj has responded to this thread in the Workshop newsgroup:
http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.workshop&item=1250&utag=
"Yves Léauté" wrote:
>
Hi,
I am trying to deploy a simple simple WEB service -which works fine within the
workshop 8.1 environment- on a different "production" server.
I generated manually all the JMS queues on the target database, as well as the
pointbase additional tables as specified in the documentation (based on the <wlw-manifest.xml>
file included in the ear file) .
The deployment ends with following error:
"weblogic.servlet.WlwJSPServlet" (see below).
Who could help ?
Thanks a lot
Yves
[Deployer:149033]preparing application WebServiceNAP on myserver
[Deployer:149033]failed application WebServiceNAP on myserver
[Deployer:149034]An exception occurred for task [Deployer:149026]Deploy application
WebServiceNAP on myserver.:
Exception:weblogic.management.ApplicationException: prepare failed for WebServiceNAPWeb
Module: WebServiceNAPWeb Error: Could not load WebServiceNAPWeb: weblogic.management.DeploymentException:
[HTTP:101283]ServletContext(id=34197168,name=WebServiceNAPWeb,context-path=/WebServiceNAPWeb):
jspServlet "weblogic.servlet.WlwJSPServlet" defined in weblogic.xml could not
be loaded.
java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet
at weblogic.utils.classloaders.GenericClassLoader.findClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:198)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;Z)Ljava.lang.Class;(Unknown
Source)
at java.lang.ClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(Unknown
Source)
at weblogic.utils.classloaders.GenericClassLoader.loadClass(Ljava.lang.String;)Ljava.lang.Class;(GenericClassLoader.java:223)
at weblogic.servlet.jsp.JspConfig.isJspServletValid(Ljava.lang.String;Ljava.lang.String;Ljava.lang.ClassLoader;)Z(JspConfig.java:317)
at weblogic.servlet.internal.WebAppServletContext.registerJspServlet(Lweblogic.management.descriptors.WebDescriptorMBean;)V(WebAppServletContext.java:2517)
at weblogic.servlet.internal.WebAppServletContext.prepareFromDescriptors(Lweblogic.management.descriptors.WebDescriptorMBean;)V(WebAppServletContext.java:1878)
at weblogic.servlet.internal.WebAppServletContext.init(Ljava.lang.String;Lweblogic.management.descriptors.WebDescriptorMBean;Z)V(WebAppServletContext.java:583)
at weblogic.servlet.internal.WebAppServletContext.<init>(Lweblogic.servlet.internal.HttpServer;Lweblogic.management.configuration.WebAppComponentMBean;Lweblogic.servlet.internal.WebAppModule;Lweblogic.management.ApplicationContainer;Lweblogic.application.ApplicationInfo;)V(WebAppServletContext.java:511)
at weblogic.servlet.internal.HttpServer.loadWebApp(Lweblogic.management.configuration.WebAppComponentMBean;Lweblogic.management.ApplicationContainer;Lweblogic.application.ApplicationInfo;Lweblogic.servlet.internal.WebAppModule;)Lweblogic.servlet.internal.WebAppServletContext;(HttpServer.java:594)
at weblogic.servlet.internal.WebAppModule.prepare(Ljava.lang.ClassLoader;[Lweblogic.management.configuration.VirtualHostMBean;ZLjava.lang.String;)V(WebAppModule.java:623)
at weblogic.j2ee.J2EEApplicationContainer.prepareWebModule(Lweblogic.utils.classloaders.GenericClassLoader;Lweblogic.j2ee.J2EEApplicationContainer$Component;Z)V(J2EEApplicationContainer.java:2896)
at weblogic.j2ee.J2EEApplicationContainer.prepareModules([Lweblogic.j2ee.J2EEApplicationContainer$Component;Ljava.lang.String;Z)V(J2EEApplicationContainer.java:1532)
at weblogic.j2ee.J2EEApplicationContainer.prepare([Lweblogic.j2ee.J2EEApplicationContainer$Component;[Ljava.lang.String;Ljava.lang.String;Ljava.lang.String;)V(J2EEApplicationContainer.java:1188)
at weblogic.j2ee.J2EEApplicationContainer.prepare(Ljava.lang.String;[Lweblogic.management.configuration.ComponentMBean;[Ljava.lang.String;)V(J2EEApplicationContainer.java:1031)
at weblogic.management.deploy.slave.SlaveDeployer$ComponentActivateTask.prepareContainer()V(SlaveDeployer.java:2634)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.createContainer()Z(SlaveDeployer.java:2584)
at weblogic.management.deploy.slave.SlaveDeployer$ActivateTask.prepare()V(SlaveDeployer.java:2506)
at weblogic.management.deploy.slave.SlaveDeployer.processPrepareTask(Lweblogic.management.deploy.OamVersion;Lweblogic.management.runtime.DeploymentTaskRuntimeMBean;Z)V(SlaveDeployer.java:833)
at weblogic.management.deploy.slave.SlaveDeployer.prepareDelta(Lweblogic.management.deploy.OamDelta;Lweblogic.management.deploy.OamVersion;Z)Z(SlaveDeployer.java:542)
at weblogic.management.deploy.slave.SlaveDeployer.prepareUpdate(Ljava.util.ArrayList;Z)V(SlaveDeployer.java:500)
at weblogic.drs.internal.SlaveCallbackHandler$1.execute(Lweblogic.kernel.ExecuteThread;)V(SlaveCallbackHandler.java:25)
at weblogic.kernel.ExecuteThread.execute(Lweblogic.kernel.ExecuteRequest;)V(ExecuteThread.java:197)
at weblogic.kernel.ExecuteThread.run()V(ExecuteThread.java:170)
at java.lang.Thread.startThreadFromVM(Ljava.lang.Thread;)V(Unknown Source)
- with nested exception:
[java.lang.ClassNotFoundException: weblogic.servlet.WlwJSPServlet]
Maybe you are looking for
-
Opening Balances for Previous Periods
Hi Experts, There is a client requirement of entering opening balances for GL for previous periods before going live. eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system. Please enlighten on how to
-
Can't get icloud mail to work today, on and device, is there a problem with server?
Anyone else with same problem or anyone can tell me how to sort it out please?
-
Including a Pre-Built LLB in Application Builder 8.X
I have just recently updated some old code to 8.5.1. This code contains many dynamic calls to VIs located in pre-built LLBs (LLBs that were saved prior to application builder). This application is also compatible with a priority plug-in architecture.
-
mms videos only play in message bubble not full screen like it's supposed to on 6 plus
-
How can I get my songs on itunes
I'm trying to find out how I can get my songs onto the itunes website, so they can be purchased from there. I am a BMI affiliate and also have a publishing company. I have not been able to find any apple related site that provides information as to h