Bug in Reports 6 Urgent
HI,
I have Reports (dev 6.0.5). Whenever I use Built in package LIST in my application it compiles but during execution I get an error that package not found...please help URGENT
TIA
Anand
I can't reproduce this with Reports 6i (6.0.8). Are you sure that it's the LIST package that's causing the compilation issues (often this issue can be caused by running against a different database that was compiled against, and data structure changes making automatic compilation impossible).
If you've checked this out, and still feel that you have a bug then I would suggest that you log an iTAR with Oracle Support.
Regards,
Danny
Similar Messages
-
Bug in report CKDBSZ in Oracle Designer 2.1.2
In that report (Database Table and Index Size Estimate) there's
the following bug: the report doesn't compute estimates of
indexes belonging to tablespaces other than those from their
corresponding tables.
Does anyone know if Oracle Corporation has corrected the
problem? If not, does anyone have a corrected version from this
report?
Thank you!
nullCarlos,
This forum is for Headstart related questions and experiences
only. Please go to metalink.oracle.com to get more information on
your problem.
Regards,
Lauri
Carlos P rez (guest) wrote:
: In that report (Database Table and Index Size Estimate) there's
: the following bug: the report doesn't compute estimates of
: indexes belonging to tablespaces other than those from their
: corresponding tables.
: Does anyone know if Oracle Corporation has corrected the
: problem? If not, does anyone have a corrected version from this
: report?
: Thank you!
null -
Bug toolkit report - LMS 3.1
Hi
I have problems with Bug toolkit report - bug summary report.
I have empty all columns in this report. No bugs. Despite of having over 500 devices with various IOSes.
Is it depends on CCO account or something else?
Best regards
MarekThe Bug Toolkit report in RME can be problematic when it comes to certain device types. That is why there is now a link to the Cisco.com Bug Toolkit report in the RME report interface. You may have to forgo using the RME report, and use the Cisco.com tool directly to find bugs.
-
Ciscoworks LMS 3.2 bug summary report
Hi,
I have one Ciscoworks LMS 3.2, it managed around 500 devices. I tried to generate bug summary report and the bug number is zero. Please kindly help to solve this problem.
Best Regards,
Jackson KuFor how many devices are you running the report?
[ Wed Jan 05 21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,populateResults,295,Cisco.com URL Connection TimeOut: Try again later or with less number of devices.
Have you tried running it for just one?
This is also kind of strange,
[ Wed Jan 05 21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,formBTDevHash,228,Device(s) are not supported by Cisco.com.
[ Wed Jan 05 21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,formBTDevHash,229,Hence Could not generate report
Like as if cisco.com would not know about these C3750's
Maybe do an export of these 3750's in the DCR to see if the all have the same OID and if it is a supported OID.
Are your device packages up to date? You may want to sync those with CCO.
Cheers,
Michel -
Unable to generate BUG summary report in RME
Hi, I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014
I am using LMS3.1 attaaching snap shot of my patch level and application version running on LMS...
Please help me to solve this isue.
ThanksUpgrade to LMS 3.2.1
Install the patch for version 3.2 mentioned here https://supportforums.cisco.com/docs/DOC-16806
Then it works again
Cheers,
Michel -
Hi guru's this is very urgent issue...
i need GR/IR accounts for one particular vendor
for this i use Tcode fbl3n... i gave GR/IR no. i was dowloading this file
sort it vendor wise.
here WE , RE two document type is there
which one i have to take report???? just tell me
( i have submit report document type WE but it snot correct ithink thats why iam asking you) pleas help me out.Hi
Document type WE is created when goods are received... ie. in MIGO
Entry Dr Inventory a/c ; Cr GR/IR a/c
Document type RE is created at the time of Invoice i.e. in MIRO
Entry Dr GR/IR a/c ; Cr Vendor a/c
So take RE to see the GR/IR accoutns for one particular vendor.
Radha -
BUG: iTunes Reporting Section Doubling Download Metrics
I've found what seems to be a bug on the reporting section of the iTunes U metrics and am wondering if anyone else is experiencing this.
I have attached a video to demonstrate what is happening, but essentially if I start counting metrics from Jan 2012, which is when Apple switched over to their new reporting system, the system doubles our number of downloads (among other things). If we start counting from Feb 2012 through the present, the metrics seem to be consistent with what Apple shows me on the front summary page.
http://cdnapi.kaltura.com/index.php/kwidget/cache_st/1362518770/wid/_347381/uico nf_id/12311262/entry_id/1_5kppif39
Any thoughts on this would be great.
Best,
KatieKatie;
Sorry that I couldn't be of more help. Just for grins I tried the sequence again on a different Mac (MacBook Air, 10.8.2) with the same results...no change in the numbers.
Just as an experiment, have you tried resetting Safari? It might be worth a try. All the best...
Syd Rodocker
SRVideo Media Design
Apple iTunes U Administrator
Tennessee's Electronic Learning Center -
Hi ABAP Guru's
I got a requirement to develop an report which lists the stock(Opening Stock and Closing stock) for each material of a plant in given date range.whose Values to be matched with either MB5B or MC.9 Tcodes.I have found few tables for Stock like MBEW,MARD but those values are not matching with the Transactions.Can u tell me exactly how can i develop this report.? I'll be very thankful if u do the same.
DESCRIPTION TABLENAME FIELD NAME
Plant :
Material :
Material group :
From date :
to date :
opening stock :
total receipt qty :
total issue qty :
closing stock :
unit :
please provide me table-field name
its urgent
regards
rakeshHi
is you problem is solved if solved please sene me your code ,i do have same kind of requirment... -
: HIDING SUMMARY COLUMNS IN MATRIX REPORT , URGENT
Hi,
Can any one please tell me how to hide a column in oralce matrix report. Its a summary column for the matrix report which appears next to the cell values. For example
Manufacturer
Brand
SubBrand1 SubBrand2 Brand Total Manufacturer Total
Week $ Sales $ Sales Total $ Sales Total $ Sales
This is a case where,the cell value is the $ sales for the SubBrand for the week. And it gets total at each brand level and each Manufacturer level. The requrement is if there is only one SubBrand for a Brand then the Brand total should not appear on the report. Similarly if there is one Brand for a Manufacturer, then the total at Manufacturer level should not appear . The point is not only it should dissapear but the frame should srink to make it fell that there is no totaling going on at those two levels. If the fileds just remains blank then the report looks odd. So the gap should be srinked as well. How to do it . This is very urgent . Please help me out.
Thanks
Ferozuse a formst trigeer on the field that returns false when you don't want to display the field.
-
Hello,
I want to create pie chart report which will display bug counts according to their age i.e. within last month, 1-3 month old and 3+ month ago.
I have got dataset (TFS2010Olap as data source) which is displaying 2 columns, System_CreatedDate and WorkItem_count. I want to create group expression at chart level so it categories
source data and display on chart accordingly.
I am using this expression in categoryGroup of pie chart:
=iif(CDate(Fields!System_CreatedDate.Value) > DateAdd("m", -1, now), "Within Previous Month", iif(CDate(Fields!System_CreatedDate.Value) > DateAdd("m", -3, now), "1-3 Months Old", "3+ Months Old"))
but I am getting error: Conversion from string "22/01/2012" to type "Date" is not valid. I tried to do with function
"DateDiff" but getting same error. Please let me know what I am missing or wrong in the expression? I had a look at MSDN post with title "SSRS
Report to calculate Bug Age" but getting this date conversion problem.
I tried to format date as well but getting format error again:
=iif(cdate(format((Fields!System_CreatedDate.Value),"dd/MM/yyyy")) > format(DateAdd("m", -1, now),"dd/MM/yyyy"), "Within Previous Month",
iif(cdate(format((Fields!System_CreatedDate.Value),"dd/MM/yyyy")) > format(DateAdd("m", -3, now),"dd/MM/yyyy"), "1-3 Months Old", "3+ Months Old"))Hi gajeshm,
I have tested on my local environment and can reproduce the issue, the issue caused by the format of the
System_CreatedDate which is "dd/MM/yyyy" and not supportted as the date type in the report but instead of string type. You need to convert this field to the string format "MM/dd/yyyy" and then using the CDate()
function to change it the Date type (because the format "dd/MM/yyyy" which is not support to use directly in the CDate() function, so we need to change it to "MM/dd/yyyy" using the split() function and this format will support to use in
the CDate() function).
Details information below for your reference:
Right click the dateset to add calculated field(NewSystem_CreateDate) and use expression as below, this calculated field will display the NewSystem_CreateDate which is the datetype and format is "MM/dd/yyyy":
=Cdate(split(Fields!System_CreatedDate.Value,"/")(1) &"/"& split(Fields!System_CreatedDate1.Value,"/")(0)&"/"&split(Fields!System_CreatedDate.Value,"/")(2))
Modify the first expression you have provided and change the "System_CreatedDate" to the Calculated field "System_CreatedDate":
=iif(Fields!NewSystem_CreatedDate.Value> DateAdd("m", -1, now), "Within Previous Month", iif(Fields!NewSystem_CreatedDate.Value > DateAdd("m", -3, now), "1-3 Months Old", "3+ Months Old"))
If you still have any problem, please feel free to ask.
Regards,
Vicky Liu
If you have any feedback on our support, please click
here.
Vicky Liu
TechNet Community Support -
2D Axis Scaling Bug in Reports (DIAdem 2014)
Hello,
I've run across a rarther annoying bug in the 2D axis scaling for Reports. Here's how to recreate it:
Load a dataset that has x and y components.
Create a new layout in the Report tab
On Sheet1, add a Simple 2D Axis System.
Select x and y from the dataset and drag it into the 2D axis system.
Change the scaling mode from "Completely Automatic" to "Manual."
Change the "Begin" number to something close to the default DIAdem has set. Do not touch the "End" number. Click OK.
Add Sheet2 and repeat steps #3 thru #6 on Sheet2 with a different dataset.
Both plots look good right now...
Go to Sheet2 and double click on the chart to bring up the Curve and Axis Definition.
Don't touch anything...just click "Cancel."
After clicking Cancel, the scaling of the 2D axis completely changes. I believe what happens is that DIAdem takes whatever the previous "End" number was and uses that instead of the "End" number you want. Also, you don't actually have to go into the Curve and Axis Definition to create this bug. Press cancel while editing anything like text (for example)...bye bye plot.
Moreover, if I go back in and set the scaling mode back to Auto, click preview to refresh the plot, then switch the mode to Manual, everything looks good. However, if I copy Sheet2, the plot on Sheet2_Copy1 is messed up the same way as if I hit Cancel but Sheet2 is OK.
Worst of all, the undo function does not work on this unwanted scaling change.
This is a bug that makes plots in the Report files almost unusable. I hope this is re-producable on other systems so a patch can be issued. Let me know what you find.
The only workaround I've found is to click OK instead of Cancel, which isn't always preferred.
Thanks,
Jacob
Solved!
Go to Solution.Hello jrasco,
You are right. This is a bug in DIAdem 2014. We fixed it for the DIAdem service pack.
This is the link to the English DIAdem 2014 SP1
Thank you
Walter -
Bug in Report Buider (anybody solve it?)
We are facing a problem with Oracle Developer Report Builder
6.0.5.28.0 . The Problem is as Follows.
When we print a report from the previewer of a
character mode report it is giving a GPF error and we are
unable to print the
Report but if the report is in Bitmap then it works
properly. The same character mode report if printed as
Detination
'Printer' then it prints properly.
When debugged using a VC++ Debugger we get the following
error
' Unhandled Exception RWRBE60.EXE(CORE40.DLL) ;
OXC0000005; Access Violation; and the system hangs.
Because of this we a facing a delay in the Release of Our
Product to our customers.
Requesting anybody to send me details
regarding this .
nullHi,
Engineering researched the issue and it is a bug (design error) that needs to be fixed. (The semi-colon should not be used as the delimiter of two report rules.) I will let you know when I have more information.
In the meantime, the documentation will be clarified with this information to show the current behavior:
Beginning with firmware version 7.5.2b, the IP phone has the capability to do a delta configuration report and a status report. The phone reports the status data if the [--status] keyword is defined.
Both the status report rule and configuration report rule can be configured in the parameter . These two report rules should be separated with a semi-colon.
If the [--status] keyword or the status report file path is missing, the phone will not report the status data.
For example, if the following is configured:
http://my_http_server/config-525.xml
The phone will report the configuration data to
http://my_http_server/config-525.xml.
If the following is configured:
[--status]http://my_http_server/status-525.xml
The phone will report the status data to
http://my_http_server/config-525.xml.
If the following is configured:
[--delta]http://my_http_server/config-525.xml;
[--status]http://my_http_server/status-525.xml
The phone will report the delta configuration data to
http://my_http_server/config-525.xml and the
status data to http://my_http_server/status-
525.xml. -
HTML report bugs to report?
I did experience two problem with the HTML report in LV6, LV8.0, LV8.5 and LV8.6.
1: When images are placed in the report these are generated in the temp folder. When the report is disposed, these files are not deleted. This will cause the temp folder to fill. I have modified my dispose report.vi file in vi.lib to solve this problem.
2: The append control image uses a millisecond timestamp to create a unique filename. When this function is called more then once in a millisecond the unqiue naam is not unique. Again, i have modified my dispose report.vi file in vi.lib to solve this problem.
Is this a worthy bug report so this fix can be included in the new LV version?
C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\Utility\NIReport.llb\HTML\Dispose Report.vi
Bug: Found in LV 8.5, the images that are generated for the report are not ereased but are left as a trace in the <user>.temp folder
Repair: At dispose, delete all image files. Use the 'save-report' function to keep all these items
C:\Program Files\National Instruments\LabVIEW 8.6\vi.lib\Utility\NIReport.llb\HTML\Append Control Image to Report.vi
Bug: Found in LV 8.5, generation of unique number of image is based on 1msec timer. When function is called more then once in a msec this results in a not unique number.
Repair: A GLI function has been added to replace the timer, now a unique number is generated every time.
Attachments:
Dispose Report.vi 14 KB
Append Control Image to Report.vi 26 KBHi Mark
please add these bugs to the monthly bugs on this forum.
http://forums.ni.com/ni/board/message?board.id=BreakPoint&thread.id=6602
More people look over there and ask for a CAR (Corrective Action Request number)
greetings from the Netherlands -
# in output of report: urgent
Hi,
I am facing a problem. I have an infobject 0class_num of character type. In any case if we dont have value then in output we get # instead of blank. But when i execute my report which is having a column contract type (0class_num) then in output it gives me something like '#/Warranty'. I tried to change display setting which is set to key by default and if i make ti to text then this value comes up 'Not assigned' but when i look up at data in the cube then there is no # preeceding the data. Can anybody please tell me from where this # is coming up and how to remove it ?
Its urgent please help,
Thanks !Yes you are right its having compounding infoobject 0class_type. Please tell me how to remove it. My object 0class_num is being used in a cube, i tried to remove 0 class_type from there but when i remove its compounding from object 0class_num i get following error:
Infoobject 0class_type is used in transfer rules(T) of char 0class_num.
We are not mainting master data for it. so there is no transformation but in text table of 0class_num this 0class_type is present how to remove it.
Please guide !
Thanks -
Problem with printing report (URGENT)
hi every body, (urgent)
When I print a report the margin of report not as i am like, i change the setting of printer to be suitable with what i want but nothong change,so the output of report not good.
can any body tell me if can change margin of the printer from inside the report (at run time) or any solution.
thanks
nullits the simple student management system where the teacher will input the marks of the students in particular subjects and store it in the database. now i have to print that on the report card. printing report as per student might be troublesome so i want to implement the " print all" button where the report card of all the students in that class will be printed in the report cards. its: printer printing the report of a student in the paper (A4 size) and then printer takes another paper sheet and then print the report of another student of same class until finish. how to accomplish this task?
Maybe you are looking for
-
Start a java program from an FMB then read and write some variables
Hello, I am trying to see whether the following setup works: item A, B, D and Button Z are on a Forms Canvas. User clicks on Button Z. This will launch a java program (Myprog class). Myprog main will read values in item A and B, run some calculation
-
Recently, when I try to open email attachments created in Word the Word program opens up but no document! It doesn't even open a blank document, it just has all the toolbars and then nothing. I can open the documents in a different program (like Text
-
Unable to import photo library from iPhone 3GS into new Mac Pro. I have gone to iTunes when USB connected but not showing photos. Also gone to iPhoto still cannot see the photos. Have done Sync as well but still now joy! Help!
-
Big question about dns in solaris 10
hi, in solaris 10 dns[client] is working fine even though the service is in disabled state. bash-3.00# svcs -a | grep dns disabled Oct_07 svc:/network/dns/server:default disabled 20:13:50 svc:/network/dns/client:default bash-3.00# still i can able to
-
Hi, I have created my first RFC Iview and was trying to preview it. But when i hit preview button i just get below message : <b>com.sapportals.connectors.SAPCFConnector.execution.structures.RecordWrapper@86fcbc</b> Before you ask i have tested system