Bug in server 2012
If I am logged in to 2012 with a LUA account but want to go to the administrators Appdata\Roaming folder I have to key in the password. If I keep drilling down into it to find the file I want and then use the back button to back out, it will let
me use the forward button to go back to the restricted folder. Additionally, the same LUA user can use the document recent places to jump straight to the protected location. This seems like a bug to me.
I've seen this in 2008 as well.
When you are trying to get into a protected folder, you will be prompted by the UAC to perform an administrative function.
Because you are an admin of that machine, you have the ability to grant access. When you are prompted for authentication, you're modifying the ACL. The next time you go in, you're an authorized user.
To test this:
- Access the folder remotely: \\server\path... and check the ACLs on the file.
- Ensure your account is not listed.
- Navigate normally like you mentioned above.
- Check the ACLs again and you should see your account.
It's actually designed to work this way.
I first came across this scenario while going through a security audit and the ACLs on our NTDS folders listed explict admin accounts, rather than just 'Administrators'.
Let me know how that goes.
- If you find my post to be helpful, or the answer, please mark it appropriately.
Chris Ream
Similar Messages
-
We seem to be having an issue recently after introducing new Windows Server 2012 R2 servers where they fail to register DNS correctly. The Windows Firewall is off and the servers are on the same VLAN with no firewalls between them.
When I do an ipconfig /registerdns or wait 24 hours for the system to try we get the following error:
The system failed to register host (A or AAAA) resource records (RRs) for network adapter
with settings:
Adapter Name : {4A0ECF05-193F-4BEA-AA46-BEC593BA752B}
Host Name : SRV-DATA
Primary Domain Suffix : internal.local
DNS server list :
192.168.0.50, 192.168.0.42
Sent update to server : <?>
IP Address(es) :
192.168.0.99
The reason the system could not register these RRs was because the DNS server contacted refused the update request. The reasons for this might be (a) you are not allowed to update the specified DNS domain name, or (b) because the DNS server authoritative
for this name does not support the DNS dynamic update protocol.
To register the DNS host (A or AAAA) resource records using the specific DNS domain name and IP addresses for this adapter, contact your DNS server or network systems administrator.
On our DNS server we have set for the internal.local zone Secure Updates only so that looks good because it is Active Directory that should be handling this authentication to update the record I assume. Just to mention that when also doing an ipconfig /regsiterdns
the update fails within a few seconds.
Source: DNS Clients Events
Event ID: 8018
User: NETWORK SERVICE
This issue is only affecting Windows Server 2012 R2 clients and testing with Windows Server 2008 R2 clients works no issues. So is this a mis-configuration or a bug with Windows 2012 R2? I have checked all DNS settings on client / server which all look good
to me so reaching out now to see if anyone has any ideas?
Environment:
- Windows Server 2012 R2 Domain Controllers (Forest/Domain Levels 2012 R2)
- Windows Server 2012 R2 Client machines (Physical and Virtual)
- Windows Server 2008 R2 Client machines (Physical and Virtual)The zone is configured as "Secure Only"
The PDC is the SOA for the zone
I dont have a packet capture from the DC, only the client.
The query you asked me to run is too long to paste in here, however this is the DNS zone it cannot update:
NotifyServers :
SecondaryServers : {10.2.0.3, 10.2.0.5}
AllowedDcForNsRecordsAutoCreation :
DistinguishedName : DC=internal.local,cn=MicrosoftDNS,DC=ForestDnsZones,DC=internal,DC=local
IsAutoCreated : False
IsDsIntegrated : True
IsPaused : False
IsReadOnly : False
IsReverseLookupZone : False
IsShutdown : False
ZoneName : internal.local
ZoneType : Primary
DirectoryPartitionName : ForestDnsZones.internal.local
DynamicUpdate : Secure
IsPluginEnabled : False
IsSigned : False
IsWinsEnabled : False
Notify : NoNotify
ReplicationScope : Forest
SecureSecondaries : TransferToSecureServers
ZoneFile :
PSComputerName :
CimClass : root/Microsoft/Windows/DNS:DnsServerPrimaryZone
CimInstanceProperties : {DistinguishedName, IsAutoCreated, IsDsIntegrated, IsPaused...}
CimSystemProperties : Microsoft.Management.Infrastructure.CimSystemProperties -
Windows Media Player on Windows Server 2012 R2 Datacenter Edition
I have a server with Windows Server 2012 R2 Datacenter edition installed. This server is being used as a terminal server and I needed to have Windows Media Player installed in order to use a certain feature of a program running on the terminal server. After
researching online I found that all I should need to do is install the Desktop Experience feature and Windows Media Player was included in that. After installing the Desktop Experience feature and restarting the server, I was not able to find Windows
Media Player anywhere. I tried the same process on another server running Windows Server 2012 R2 Datacenter with the same results.
I was curious as to if this was a Datacenter thing where it was specifically not included with Datacenter edition. I was not able to find any documentation stating that WMP was not included in Datacenter, and everything that I found stated that the feature
sets for Standard and Datacenter were the same, it was just the licensing for them was different.
Curious to see if it would get installed with Desktop Experience on Standard, I spun up a Windows Server 2012 R2 Standard VM and installed Desktop Experience and sure enough WMP was installed as well. I then upgraded the Standard VM to Datacenter with a
Datacenter product key and after a restart WMP was still present.
I have also tried this exact same process with Windows Server 2012 (non R2) Datacenter edition and WMP was installed as expected, so it appears that this is only a problem with R2.
My question is, I this "works as designed" and I was just not able to find the documentation to support it or is this a bug?
Update: After doing some more playing around I noticed that if I did a clean install of Windows Server 2012 R2 Datacenter and then installed the Desktop Experience feature and WMP does get installed. Then I remembered that on the servers that I was trying to
install WMP on and it wasn't working were upgraded from 2012 to 2012 R2. So I created a brand new VM and installed Server 2012 Datacenter (non R2), then upgraded to Server 2012 R2 Datacenter and installed Desktop Experience and sure enough, WMP did not
install. So now I really think it is a bug and it is related to the 2012 to 2012 R2 upgrade process.Hi Caleb CSG,
Thanks for your feedback.
I'll feedback a report to Microsoft, and I also recommend you can post this bug in Microsoft connect.
https://connect.microsoft.com/WindowsServer/feedback/CreateFeedbackForm.aspx?FeedbackFormConfigurationID=5352&FeedbackType=1
Best Regards,
Anna
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Intermittent loss of UNC path access on Windows Server 2012
Hi All,
I hope someone can help with a major headache we've been having on two Windows Server 2012 boxes since September this year. Basically, these servers will intermittently lose the ability to browse network shares from windows explorer and the only way we have
found to resolve this is to reboot. When the issue happens, we can't even log into the server as it sits at 'applying user settings' - presumably as it is failing to access the netlogon share on our DCs. If we have an active RDP session when the issue occurs,
we can connect. In this instance we see that if you enter a UNC path in Windows explorer and hit enter, nothing happens - no error messages or anything. The only way I can get any response is when trying to access the IPC$ share on another server, which gives
the following response:
\\server\ipc$ is not accessible. You might not have permission to use this resource, Contact the administrator of this server to find out if you have access permissions.
The parameter is incorrect.
Everything looks right from a physical network perspective, as we can ping from the affected servers and DNS queries are working fine. I can even run net view from powershell and see the local servers and shares on these, however any attempt to access shares
just hangs the powershell session.
If I look in the SMBClient event logs, I can see entries like the following:
Event ID 30805
The client lost its session to the server.
Error: The transport connection is now disconnected.
This is made worse by the fact that when this issue happens, we can't even cleanly reboot the server (it just hangs) and have to perform a cold boot.
The firewall has been turned off and we have taken off our antivirus software to eliminate it as a possible cause. We have even rebuilt one of these servers on a clean install of 2012 R2, but the issue re-appeared. We have also tried using different NIC
drivers (Broadcom NICs installed) to no avail. We have also tried disabling IPv6.
We have logged a ticket with Microsoft support, who have come back telling us that this could be related to a known bug with DFS in 2012 for which a fix is being tested prior to release in a few weeks. However, I can't sit around on my hands until then on
the off chance that this fix will resolve our problem. These servers are hosting our production Lync 2013 front end service and when this issue occurs it breaks the address book search and response group services, so this issue is of critical importance for
us to get resolved asap.
Any help on this would be greatly appreciated.Hi,
That's right, if you hit enter absolutely nothing happens, no error messages. It makes no difference if I try name or IP address - even trying \\localhost doesn't work. A few minutes later after trying, an entry appears in the SMBClient event logs as mentioned
in my original post. To me it looks like something deep within the networking operations of the OS is randomly breaking. Also, if I try to browse the network from Windows explorer, it just hangs. When I try to restart the workstation service, it just gets
permanently stuck in a stopping state and the server has to be cold booted. Once it boots up, everything is working fine again....until the next time. There is absolutely nothing appearing in the application or system event logs indicating the root cause.
I've checked and DNS resolution is working OK and I can telnet to other hosts on all the required ports.
I had originally thought it might be related to the Broadcom NICs as we've had issues with them in the past, but we switched over to use the 2012 inbox driver for them and the same issue happens. I should also mention that one server is a blade and the other
a rackmount box. Dell support have run full diagnostics on both and have come up clean, so it doesn't appear to be a hardware issue. The even more baffling thing is that we have a third server with identical spec and config that does not have the problem.
The only difference with this third server is that it is not part of a Lync pool pairing using DFS and sits in a remote location on a different LAN.
I had thought of trying to drop back to use SMB1 by disabling SMB2 and 3, but I'm not sure if this would adversely affect any other services.
This one really has me stumped. -
MFA not working on Windows Server 2012 R2
Been using MFA since PF days. Deployed it successfully many times but for some reason it's not working with Windows Auth, Terminal Services on a Win 2012 R2 DataCenter box? The machine was successfully added to my domain PhoneFactor group, I
can see and add the machine on the master MFA. Services are running but when I remote in I go right through without MFA stopping me? Any ideas?
TIA6.3.0 has just been released and 2012 R2 is *still* not supported. What the hell?!?
"Version 6.3.0 of the Azure Multi-Factor Authentication Server adds the
following additional functionality:
* Added one-way SMS functionality for AD FS, RADIUS and User Portal
* Added .csv file import for OATH tokens
* Added support to parse phone numbers in E.164 format during import
From the directory
* Fixed problem preventing slave servers from performing MFA if the
master server was unavailable. This problem was found to exist in
all 6.2.x builds. All customers running 6.2.x should upgrade to 6.3.
* Fixed directory sync issue for recursive security groups
* Added additional logging to AD FS adapter
* Other minor bug fixes and security improvements
Known Issues:
* Windows Authentication for Terminal Services is still not supported for
Windows Server 2012 R2"
So they added a whole stack of other functionality, but still didn't get around to taking a look at this bug. I'm stunned. Is there any sort of timeline on fixing this, or is 2012 R2 just going to remain unsupported forever? -
Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
<Author>MYDOMAIN\SERVER1</Author>
<SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
<CalendarTrigger id="Trigger 1">
<StartBoundary>2014-07-14T21:00:00</StartBoundary>
<Enabled>true</Enabled>
<ScheduleByDay>
<DaysInterval>1</DaysInterval>
</ScheduleByDay>
</CalendarTrigger>
</Triggers>
<Principals>
<Principal id="Author">
<UserId>S-1-5-18</UserId>
<RunLevel>HighestAvailable</RunLevel>
</Principal>
</Principals>
<Settings>
<MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
<DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
<StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
<AllowHardTerminate>true</AllowHardTerminate>
<StartWhenAvailable>true</StartWhenAvailable>
<RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
<IdleSettings>
<StopOnIdleEnd>false</StopOnIdleEnd>
<RestartOnIdle>false</RestartOnIdle>
</IdleSettings>
<AllowStartOnDemand>true</AllowStartOnDemand>
<Enabled>true</Enabled>
<Hidden>false</Hidden>
<RunOnlyIfIdle>false</RunOnlyIfIdle>
<DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
<UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
<WakeToRun>false</WakeToRun>
<ExecutionTimeLimit>P3D</ExecutionTimeLimit>
<Priority>7</Priority>
</Settings>
<Actions Context="Author">
<Exec>
<Command>%windir%\System32\wbadmin.exe</Command>
<Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
</Exec>
</Actions>
</Task>
Thank you in advance for your feedback.Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power? -
hyper link of public image(hyperlink or image) can not be saved on windows server 2012 and sharepoint 2010 problem, is this a bug?
thanks for any reply.
RosoneIt is not a bug, you might be using IE in Windows server 2012 and and browser might be restricting your site actions to respond properly.
Check this in a different browser or access site in a differ OS.
Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer. -
Hi,
We are having issues with Server 2012 R2 SMB shares.
We try to write some changes to a file, but we first create a temporary backup in case the write fails. After the backup is created we write the changes to the file and then we get an error:
The process cannot access the file '\\server\share\test.txt' because it is being used by another process.
It looks like the backup process keeps the original file in use.
The problem doesn't always occur the first time, but almost everytime after 2 or 3 changes. I have provided some code below to reproduce the problem, you can run this in a loop to reproduce.
The problem is that once the error arises, the file remains 'in use' for a while, so you cannot retry but have to wait at least several minutes.
I've already used Process Explorer to analyze, but there are no open file handles.
To reproduce the problem: create two Server 2012 R2 machines and run the below code from one server accessing an SMB share on the other server.
Below is the code I use for testing, if you reproduce the scenario, I'm sure you get the same error.
We are not looking for an alternative way to solve this, but wonder if this is a bug that needs to be reported?
Anybody seen this behavior before or know what's causing it?
The code:
string file =
@"\\server\share\test.txt";
if (File.Exists(file))
File.Copy(file, file +
".bak", true);
File.WriteAllText(file,
"Testje",
Encoding.UTF8);
The error:
System.IO.IOException: The process cannot access the file '\\server\share\test.txt' because it is being used by another process.Hi,
There is someone else having the same issue with yours. You could try code in the article below:
“The process cannot access the file because it is being used by another process”
http://blogs.msdn.com/b/shawncao/archive/2010/06/04/the-process-cannot-access-the-file-because-it-is-being-used-by-another-process.aspx
If you wonder the root cause of the issue, the .NET Framework Class Libraries forum can help.
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
BSOD on Server 2012 running dfs namespace and dfs replication roles with deduplication
Hello,
I have recently setup 2 dfsn & dfsr servers, both 2012 one physical the other virtual.
The idea is to have one server as primary and the other as a failover \ DR.
The primary server is virtual and connects via mpio \ iscsi to a dell san, using the provided dell DSM Drivers.
The secondary server is physical with local disk for storage.
I copy files to a namespace setup to always prefer the primary server, these files are then replicated across to the secondary.
I have also turned on deduplication on both servers to get the most out of the available storage.
This has been working well for 6 months or so, there have however been 2-3 occasions where the primary virtual server has crashed and blue screened causing the DFSR database to undergo a full consistency check.
The bug check errors i have managed to extract from the Memory.dmp and mini dump are as follows:
* Bugcheck Analysis
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: 0000000000000000, Object type of the object whose reference count is being lowered
Arg2: fffffa80379a3070, Object whose reference count is being lowered
Arg3: 0000000000000002, Reserved
Arg4: ffffffffffffffff, Reserved
The reference count of an object is illegal for the current state of the object.
Each time a driver uses a pointer to an object the driver calls a kernel routine
to increment the reference count of the object. When the driver is done with the
pointer the driver calls another kernel routine to decrement the reference count.
Drivers must match calls to the increment and decrement routines. This bugcheck
can occur because an object's reference count goes to zero while there are still
open handles to the object, in which case the fourth parameter indicates the number
of opened handles. It may also occur when the object?s reference count drops below zero
whether or not there are open handles to the object, and in that case the fourth parameter
contains the actual value of the pointer references count.
Debugging Details:
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x18
PROCESS_NAME: dfsrs.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17029 (debuggers(dbg).140219-1702) amd64fre
LAST_CONTROL_TRANSFER: from fffff800999ee0d7 to fffff8009985a440
STACK_TEXT:
fffff880`0bf3fb48 fffff800`999ee0d7 : 00000000`00000018 00000000`00000000 fffffa80`379a3070 00000000`00000002 : nt!KeBugCheckEx
fffff880`0bf3fb50 fffff800`99c33529 : fffffa80`379a3070 fffff8a0`0244adc0 00000000`000017e4 0000001b`930b60d8 : nt! ?? ::FNODOBFM::`string'+0x38605
fffff880`0bf3fb90 fffff800`99859453 : fffffa80`4063db00 fffffa80`4063db00 fffff880`0bf3fcc0 00000000`00000001 : nt!NtClose+0x239
fffff880`0bf3fc40 000007ff`5e8d2cda : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
0000001b`9069f398 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`5e8d2cda
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+38605
fffff800`999ee0d7 cc int 3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+38605
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 51a966cd
IMAGE_VERSION: 6.2.9200.16628
BUCKET_ID_FUNC_OFFSET: 38605
FAILURE_BUCKET_ID: 0x18_OVER_DEREFERENCE_nt!_??_::FNODOBFM::_string_
BUCKET_ID: 0x18_OVER_DEREFERENCE_nt!_??_::FNODOBFM::_string_
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x18_over_dereference_nt!_??_::fnodobfm::_string_
FAILURE_ID_HASH: {eaf19261-0688-f327-a17d-6f7960ac4ebd}
Followup: MachineOwner
rax=0000000000000000 rbx=ffffffffffffffff rcx=0000000000000018
rdx=0000000000000000 rsi=fffffa80379a3070 rdi=00000000fffc000c
rip=fffff8009985a440 rsp=fffff8800bf3fb48 rbp=fffffa80379a3040
r8=fffffa80379a3070 r9=0000000000000002 r10=fffffa8030d89190
r11=fffffa804063db00 r12=00000000000017e4 r13=0000000000000000
r14=fffff8a00a548f90 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00000246
nt!KeBugCheckEx:
fffff800`9985a440 48894c2408 mov qword ptr [rsp+8],rcx ss:0018:fffff880`0bf3fb50=0000000000000018
Child-SP RetAddr : Args to Child
: Call Site
fffff880`0bf3fb48 fffff800`999ee0d7 : 00000000`00000018 00000000`00000000 fffffa80`379a3070 00000000`00000002 : nt!KeBugCheckEx
fffff880`0bf3fb50 fffff800`99c33529 : fffffa80`379a3070 fffff8a0`0244adc0 00000000`000017e4 0000001b`930b60d8 : nt! ?? ::FNODOBFM::`string'+0x38605
fffff880`0bf3fb90 fffff800`99859453 : fffffa80`4063db00 fffffa80`4063db00 fffff880`0bf3fcc0 00000000`00000001 : nt!NtClose+0x239
fffff880`0bf3fc40 000007ff`5e8d2cda : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13 (TrapFrame @ fffff880`0bf3fc40)
0000001b`9069f398 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007ff`5e8d2cda
start end module name
fffff800`987b1000 fffff800`987ba000 kd kd.dll Thu Jul 26 03:30:34 2012 (5010ABCA)
fffff800`99800000 fffff800`99f4c000 nt ntkrnlmp.exe Sat Jun 01 04:13:17 2013 (51A966CD)
fffff800`99f4c000 fffff800`99fb8000 hal hal.dll Wed Oct 24 04:03:21 2012 (50875A79)
fffff880`00a00000 fffff880`00a34000 ataport ataport.SYS Thu Jul 26 03:29:04 2012 (5010AB70)
fffff880`00a34000 fffff880`00a51000 lsi_sas lsi_sas.sys Fri May 11 20:40:21 2012 (4FAD6B25)
fffff880`00a51000 fffff880`00a5e000 serenum serenum.sys Thu Jul 26 03:30:13 2012 (5010ABB5)
fffff880`00a5e000 fffff880`00a6c000 fdc fdc.sys Thu Jul 26 03:30:15 2012 (5010ABB7)
fffff880`00a7b000 fffff880`00adb000 volmgrx volmgrx.sys Thu Jul 26 03:29:59 2012 (5010ABA7)
fffff880`00adb000 fffff880`00ae4000 intelide intelide.sys Thu Jul 26 03:29:52 2012 (5010ABA0)
fffff880`00ae4000 fffff880`00af3000 PCIIDEX PCIIDEX.SYS Thu Jul 26 03:29:09 2012 (5010AB75)
fffff880`00af3000 fffff880`00b56000 md3dsm md3dsm.sys Wed Aug 22 22:14:46 2012 (50354BC6)
fffff880`00b56000 fffff880`00b87000 msdsm msdsm.sys Sat Oct 05 04:32:09 2013 (524F8839)
fffff880`00b87000 fffff880`00ba0000 vmci vmci.sys Tue May 01 02:14:27 2012 (4F9F38F3)
fffff880`00ba0000 fffff880`00bb5000 vsock vsock.sys Fri Aug 30 20:25:34 2013 (5220F1AE)
fffff880`00bb5000 fffff880`00bcf000 mountmgr mountmgr.sys Thu Jul 26 03:29:33 2012 (5010AB8D)
fffff880`00bcf000 fffff880`00bd9000 atapi atapi.sys Thu Jul 26 03:30:33 2012 (5010ABC9)
fffff880`00bd9000 fffff880`00bf0000 vmxnet3n61x64 vmxnet3n61x64.sys Fri Sep 27 10:40:11 2013 (5245527B)
fffff880`00bf0000 fffff880`00bfa000 pnpmem pnpmem.sys Thu Jul 26 03:30:11 2012 (5010ABB3)
fffff880`00c40000 fffff880`00c9f000 mcupdate_GenuineIntel mcupdate_GenuineIntel.dll Thu Jul 26 03:30:12 2012 (5010ABB4)
fffff880`00c9f000 fffff880`00cfb000 CLFS CLFS.SYS Thu Jul 26 03:29:39 2012 (5010AB93)
fffff880`00cfb000 fffff880`00d1e000 tm tm.sys Thu Jul 26 03:29:01 2012 (5010AB6D)
fffff880`00d1e000 fffff880`00d33000 PSHED PSHED.dll Thu Jul 26 05:53:53 2012 (5010CD61)
fffff880`00d33000 fffff880`00d3d000 BOOTVID BOOTVID.dll Thu Jul 26 03:30:22 2012 (5010ABBE)
fffff880`00d3d000 fffff880`00dbc000 CI CI.dll Thu Mar 28 03:30:42 2013 (5153B962)
fffff880`00dbc000 fffff880`00de1000 rasl2tp rasl2tp.sys Thu Jul 26 03:23:16 2012 (5010AA14)
fffff880`00e00000 fffff880`00e49000 spaceport spaceport.sys Sat Oct 05 04:32:08 2013 (524F8838)
fffff880`00e49000 fffff880`00e61000 volmgr volmgr.sys Thu Jul 26 03:29:22 2012 (5010AB82)
fffff880`00e61000 fffff880`00ea9000 vm3dmp vm3dmp.sys Wed Oct 09 05:25:53 2013 (5254DAD1)
fffff880`00eb5000 fffff880`00f41000 cng cng.sys Thu Oct 11 06:17:34 2012 (5076566E)
fffff880`00f41000 fffff880`00f5b000 raspppoe raspppoe.sys Thu Jul 26 03:24:55 2012 (5010AA77)
fffff880`00f5c000 fffff880`00f99000 mpio mpio.sys Sat Sep 28 04:37:24 2013 (52464EF4)
fffff880`00f99000 fffff880`00fd3000 md3utm md3utm.sys Wed Aug 22 22:14:56 2012 (50354BD0)
fffff880`00fd3000 fffff880`00fef000 intelppm intelppm.sys Tue Nov 06 03:55:02 2012 (50988A16)
fffff880`01000000 fffff880`0106d000 ACPI ACPI.sys Thu Sep 20 07:09:16 2012 (505AB30C)
fffff880`01075000 fffff880`010d8000 msrpc msrpc.sys Thu Jul 26 03:28:37 2012 (5010AB55)
fffff880`010d8000 fffff880`0119a000 Wdf01000 Wdf01000.sys Sat Jun 22 04:13:05 2013 (51C51641)
fffff880`0119a000 fffff880`011aa000 WDFLDR WDFLDR.SYS Sat Jun 22 04:14:38 2013 (51C5169E)
fffff880`011aa000 fffff880`011c1000 acpiex acpiex.sys Thu Jul 26 03:25:57 2012 (5010AAB5)
fffff880`011c1000 fffff880`011cc000 WppRecorder WppRecorder.sys Thu Jul 26 03:29:07 2012 (5010AB73)
fffff880`011cc000 fffff880`011d6000 WMILIB WMILIB.SYS Thu Jul 26 03:30:04 2012 (5010ABAC)
fffff880`011d6000 fffff880`011f7000 raspptp raspptp.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`01400000 fffff880`0140d000 vdrvroot vdrvroot.sys Thu Jul 26 03:27:29 2012 (5010AB11)
fffff880`0140d000 fffff880`01424000 pdc pdc.sys Fri Mar 01 04:58:34 2013 (5130357A)
fffff880`01424000 fffff880`0143e000 partmgr partmgr.sys Wed Jan 09 04:01:42 2013 (50ECEBA6)
fffff880`01444000 fffff880`0153f000 NDIS NDIS.SYS Sat Jun 15 06:11:35 2013 (51BBF787)
fffff880`0153f000 fffff880`015ae000 NETIO NETIO.SYS Thu Oct 11 06:16:20 2012 (50765624)
fffff880`015ae000 fffff880`015b8000 msisadrv msisadrv.sys Thu Jul 26 03:28:02 2012 (5010AB32)
fffff880`015b8000 fffff880`015f5000 pci pci.sys Thu Jul 26 03:27:43 2012 (5010AB1F)
fffff880`01800000 fffff880`01816000 datascrn datascrn.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`01816000 fffff880`01824000 cbafilt cbafilt.sys Thu Jul 26 03:29:05 2012 (5010AB71)
fffff880`01824000 fffff880`0186c000 msiscsi msiscsi.sys Mon Feb 03 16:23:09 2014 (52EFC26D)
fffff880`0186c000 fffff880`01877000 kdnic kdnic.sys Thu Jul 26 03:27:41 2012 (5010AB1D)
fffff880`01877000 fffff880`01889000 umbus umbus.sys Thu Jul 26 03:27:39 2012 (5010AB1B)
fffff880`01889000 fffff880`018a9000 i8042prt i8042prt.sys Thu Jul 26 03:28:50 2012 (5010AB62)
fffff880`018a9000 fffff880`018b8000 kbdclass kbdclass.sys Thu Jul 26 03:28:47 2012 (5010AB5F)
fffff880`018b8000 fffff880`018c7000 mouclass mouclass.sys Thu Jul 26 03:28:47 2012 (5010AB5F)
fffff880`018c7000 fffff880`018e5000 parport parport.sys Thu Jul 26 03:29:53 2012 (5010ABA1)
fffff880`018e5000 fffff880`018fd000 serial serial.sys Thu Jul 26 03:30:01 2012 (5010ABA9)
fffff880`018fd000 fffff880`01952000 storport storport.sys Mon Feb 03 16:23:24 2014 (52EFC27C)
fffff880`01952000 fffff880`019b2000 fltmgr fltmgr.sys Thu Jul 26 03:30:09 2012 (5010ABB1)
fffff880`019b2000 fffff880`019e0000 quota quota.sys Thu Jul 26 03:29:14 2012 (5010AB7A)
fffff880`019e0000 fffff880`019f4000 dfsrro dfsrro.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`019f4000 fffff880`01a00000 BATTC BATTC.SYS Thu Oct 11 06:19:58 2012 (507656FE)
fffff880`01a00000 fffff880`01a2c000 tunnel tunnel.sys Thu Jul 26 03:23:04 2012 (5010AA08)
fffff880`01a2c000 fffff880`01a3b000 CompositeBus CompositeBus.sys Thu Jul 26 03:28:03 2012 (5010AB33)
fffff880`01a3b000 fffff880`01a45000 vmgencounter vmgencounter.sys Thu Jul 26 03:27:58 2012 (5010AB2E)
fffff880`01a45000 fffff880`01c2a000 Ntfs Ntfs.sys Sun Jan 26 23:28:35 2014 (52E59A23)
fffff880`01c2a000 fffff880`01c45000 ksecdd ksecdd.sys Thu Sep 20 07:09:16 2012 (505AB30C)
fffff880`01c45000 fffff880`01c56000 pcw pcw.sys Thu Jul 26 03:28:44 2012 (5010AB5C)
fffff880`01c56000 fffff880`01c60000 Fs_Rec Fs_Rec.sys Thu Jul 26 03:30:08 2012 (5010ABB0)
fffff880`01c60000 fffff880`01c8f000 ksecpkg ksecpkg.sys Thu Oct 11 06:16:46 2012 (5076563E)
fffff880`01c8f000 fffff880`01cc0000 cdrom cdrom.sys Thu Jul 26 03:26:36 2012 (5010AADC)
fffff880`01cc0000 fffff880`01d2b000 dedup dedup.sys Sat Oct 05 04:31:38 2013 (524F881A)
fffff880`01d2b000 fffff880`01d3a000 vmrawdsk vmrawdsk.sys Sun Dec 15 03:36:38 2013 (52AD23C6)
fffff880`01d3a000 fffff880`01d47000 BasicRender BasicRender.sys Thu Jul 26 03:28:51 2012 (5010AB63)
fffff880`01d47000 fffff880`01d53000 mssmbios mssmbios.sys Thu Jul 26 03:29:19 2012 (5010AB7F)
fffff880`01d53000 fffff880`01d64000 discache discache.sys Thu Jul 26 03:28:23 2012 (5010AB47)
fffff880`01d64000 fffff880`01d85000 dfsc dfsc.sys Wed Jan 15 23:42:58 2014 (52D71D02)
fffff880`01d85000 fffff880`01d91000 ndistapi ndistapi.sys Thu Sep 20 07:09:19 2012 (505AB30F)
fffff880`01d91000 fffff880`01dc0000 ndiswan ndiswan.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`01dc0000 fffff880`01dde000 rassstp rassstp.sys Thu Jul 26 03:23:59 2012 (5010AA3F)
fffff880`01dde000 fffff880`01df6000 AgileVpn AgileVpn.sys Thu Jul 26 03:23:11 2012 (5010AA0F)
fffff880`01df6000 fffff880`01dfc400 CmBatt CmBatt.sys Thu Jul 26 03:29:20 2012 (5010AB80)
fffff880`01e00000 fffff880`01e54000 CLASSPNP CLASSPNP.SYS Sat Jun 29 04:07:45 2013 (51CE4F81)
fffff880`01e54000 fffff880`01e68000 crashdmp crashdmp.sys Fri Aug 30 04:11:28 2013 (52200D60)
fffff880`01e75000 fffff880`01e7e000 Null Null.SYS Thu Jul 26 03:30:16 2012 (5010ABB8)
fffff880`01e81000 fffff880`020ba000 tcpip tcpip.sys Wed Jan 22 04:28:22 2014 (52DF48E6)
fffff880`020ba000 fffff880`02122000 fwpkclnt fwpkclnt.sys Fri Mar 01 04:55:54 2013 (513034DA)
fffff880`02122000 fffff880`0213d000 wfplwfs wfplwfs.sys Thu Oct 10 04:32:19 2013 (52561FC3)
fffff880`0213d000 fffff880`02191000 volsnap volsnap.sys Sat Jun 01 04:10:22 2013 (51A9661E)
fffff880`02191000 fffff880`021a8000 mup mup.sys Thu Jul 26 03:30:00 2012 (5010ABA8)
fffff880`021a8000 fffff880`021b4000 npsvctrig npsvctrig.sys Thu Jul 26 03:27:33 2012 (5010AB15)
fffff880`021b4000 fffff880`021d0000 disk disk.sys Sat Oct 12 07:31:15 2013 (5258ECB3)
fffff880`021ed000 fffff880`021ff000 dfs dfs.sys Thu Jul 26 03:28:21 2012 (5010AB45)
fffff880`03800000 fffff880`03863000 mrxsmb mrxsmb.sys Tue Feb 05 22:29:08 2013 (511187B4)
fffff880`0389c000 fffff880`038eb000 ks ks.sys Sat Feb 02 07:25:50 2013 (510CBF7E)
fffff880`038eb000 fffff880`038f6000 rdpbus rdpbus.sys Thu Jul 26 03:28:19 2012 (5010AB43)
fffff880`038f6000 fffff880`0390a000 NDProxy NDProxy.SYS Tue Apr 09 03:33:41 2013 (51637E05)
fffff880`0390a000 fffff880`03915000 flpydisk flpydisk.sys Thu Jul 26 03:30:15 2012 (5010ABB7)
fffff880`03915000 fffff880`03922000 dump_diskdump dump_diskdump.sys Thu Jul 26 03:29:58 2012 (5010ABA6)
fffff880`03922000 fffff880`0393f000 dump_LSI_SAS dump_LSI_SAS.sys Fri May 11 20:40:21 2012 (4FAD6B25)
fffff880`0393f000 fffff880`03947000 HIDPARSE HIDPARSE.SYS Sat Jun 29 04:08:18 2013 (51CE4FA2)
fffff880`03947000 fffff880`03955000 monitor monitor.sys Fri Mar 01 04:56:18 2013 (513034F2)
fffff880`03955000 fffff880`0397d000 luafv luafv.sys Thu Jul 26 03:29:13 2012 (5010AB79)
fffff880`0397d000 fffff880`03991000 lltdio lltdio.sys Thu Jul 26 03:24:02 2012 (5010AA42)
fffff880`03991000 fffff880`039a9000 rspndr rspndr.sys Thu Jul 26 03:24:06 2012 (5010AA46)
fffff880`039a9000 fffff880`039c9000 bowser bowser.sys Thu Jul 26 03:28:01 2012 (5010AB31)
fffff880`039c9000 fffff880`039e0000 mpsdrv mpsdrv.sys Thu Oct 31 03:42:19 2013 (5271D19B)
fffff880`03c00000 fffff880`03c73000 rdbss rdbss.sys Sat May 04 05:47:00 2013 (518492C4)
fffff880`03c73000 fffff880`03c8d000 wanarp wanarp.sys Tue Apr 09 03:31:00 2013 (51637D64)
fffff880`03c8d000 fffff880`03c9b000 nsiproxy nsiproxy.sys Thu Jul 26 03:25:00 2012 (5010AA7C)
fffff880`03c9b000 fffff880`03ca3000 vmmouse vmmouse.sys Mon Jun 04 10:34:25 2012 (4FCC8121)
fffff880`03ca3000 fffff880`03e0c000 dxgkrnl dxgkrnl.sys Thu Sep 19 04:16:23 2013 (523A6C87)
fffff880`03e0c000 fffff880`03e1d000 watchdog watchdog.sys Thu Jul 26 03:29:05 2012 (5010AB71)
fffff880`03e1d000 fffff880`03e6b000 dxgmms1 dxgmms1.sys Wed Jan 09 03:58:58 2013 (50ECEB02)
fffff880`03e6b000 fffff880`03e7c000 BasicDisplay BasicDisplay.sys Thu Jul 26 03:29:08 2012 (5010AB74)
fffff880`03e7c000 fffff880`03e8e000 Npfs Npfs.SYS Thu Jul 26 03:30:26 2012 (5010ABC2)
fffff880`03e8e000 fffff880`03e9a000 Msfs Msfs.SYS Thu Jul 26 03:30:24 2012 (5010ABC0)
fffff880`03e9a000 fffff880`03ebc000 tdx tdx.sys Thu Jul 26 03:24:58 2012 (5010AA7A)
fffff880`03ebc000 fffff880`03eca000 TDI TDI.SYS Thu Jul 26 03:27:59 2012 (5010AB2F)
fffff880`03eca000 fffff880`03ed6000 ws2ifsl ws2ifsl.sys Thu Sep 20 07:09:50 2012 (505AB32E)
fffff880`03ed6000 fffff880`03f2e000 netbt netbt.sys Thu Jul 26 03:24:26 2012 (5010AA5A)
fffff880`03f2e000 fffff880`03fc4000 afd afd.sys Wed Sep 04 04:11:20 2013 (5226A4D8)
fffff880`03fc4000 fffff880`03fee000 pacer pacer.sys Thu Jul 26 03:23:05 2012 (5010AA09)
fffff880`03fee000 fffff880`03ffe000 netbios netbios.sys Thu Jul 26 03:28:19 2012 (5010AB43)
fffff880`03ffe000 fffff880`03fff480 swenum swenum.sys Thu Jul 26 03:28:53 2012 (5010AB65)
fffff880`0ac00000 fffff880`0acdf000 HTTP HTTP.sys Fri Mar 15 00:17:15 2013 (5142688B)
fffff880`0acdf000 fffff880`0ace7000 vmmemctl vmmemctl.sys Sun Dec 15 03:36:24 2013 (52AD23B8)
fffff880`0acf8000 fffff880`0ad43000 mrxsmb10 mrxsmb10.sys Thu Jul 26 03:23:06 2012 (5010AA0A)
fffff880`0ad43000 fffff880`0ad7e000 mrxsmb20 mrxsmb20.sys Tue Feb 05 22:28:36 2013 (51118794)
fffff880`0b200000 fffff880`0b20d000 condrv condrv.sys Thu Jul 26 03:30:08 2012 (5010ABB0)
fffff880`0b20d000 fffff880`0b2ae000 srv2 srv2.sys Tue Apr 09 03:33:02 2013 (51637DDE)
fffff880`0b2cd000 fffff880`0b399000 peauth peauth.sys Tue Apr 09 03:32:01 2013 (51637DA1)
fffff880`0b399000 fffff880`0b3a4000 secdrv secdrv.SYS Wed Sep 13 14:18:38 2006 (4508052E)
fffff880`0b3a4000 fffff880`0b3e8000 srvnet srvnet.sys Tue Apr 09 03:31:13 2013 (51637D71)
fffff880`0b3e8000 fffff880`0b3fa000 tcpipreg tcpipreg.sys Thu Jul 26 03:23:13 2012 (5010AA11)
fffff880`0b4e3000 fffff880`0b570000 srv srv.sys Thu Jul 26 03:25:28 2012 (5010AA98)
fffff880`0b570000 fffff880`0b57b000 rdpvideominiport rdpvideominiport.sys Fri Oct 12 06:48:28 2012 (5077AF2C)
fffff880`0b57b000 fffff880`0b5ac000 rdpdr rdpdr.sys Thu Jul 26 03:25:18 2012 (5010AA8E)
fffff880`0b5ac000 fffff880`0b5b9000 terminpt terminpt.sys Thu Jul 26 03:28:53 2012 (5010AB65)
fffff960`00118000 fffff960`00508000 win32k win32k.sys Sat Feb 08 04:34:05 2014 (52F5B3BD)
fffff960`006cb000 fffff960`006d4000 TSDDD TSDDD.dll Thu Jul 26 03:30:25 2012 (5010ABC1)
fffff960`00879000 fffff960`008af000 cdd cdd.dll Thu Jul 26 05:49:37 2012 (5010CC61)
fffff960`00a21000 fffff960`00a60000 RDPUDD RDPUDD.dll Fri Oct 12 06:50:01 2012 (5077AF89)
Unloaded modules:
fffff880`01e68000 fffff880`01e75000 dump_storport.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000D000
fffff880`021d0000 fffff880`021ed000 dump_LSI_SAS.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001D000
fffff880`021a8000 fffff880`021b4000 hwpolicy.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000C000
fffff880`00f41000 fffff880`00f5c000 sacdrv.sys
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0001B000
fffff880`00c33000 fffff880`00c40000 ApiSetSchema.dll
Timestamp: unavailable (00000000)
Checksum: 00000000
ImageSize: 0000D000
I have searched for others having a similar problem but have not managed to find much.
The memory dump at the time of the crash does seem to hint at a problem with DFSR.exe.
The setup seems to be running fine again now and is going through its consistency checks, it is just a major inconvenience and will only get worse as the DFS becomes busier and approaches capacity.
The plan was to put this setup into production however with the unpredictability of blue screen reboots I cannot see this happening until I can find a fix or work around.
I have yet to see this problem occur on the other (physical) server, this is pretty much identical in configuration apart from its storage access.
My thoughts are a possible bug in the DFSR component or a bug in the DSM Drivers used for the iSCSI SAN connection or maybe a combination of the two.
Any help, thoughts or suggestions greatly appreciated
ThanksHi,
Please install the current version of Dfssvc.exe Dfsc.sys Dfsrs.exe for Windows Server 2012.
List of currently available hotfixes for Distributed File System (DFS) technologies in Windows Server 2012 and Windows Server 2012 R2
http://support.microsoft.com/kb/2951262
The issue may be due to the DFSRoot folder has lost NTFS permission. Some reasons why DFS root lose ACLs Links are listed in the article below:
How to implement Windows Server 2003 Access-based Enumeration in a DFS environment
http://support.microsoft.com/kb/907458/en-us
You could use dfsutil to set NTFS permission: dfsutil property ACL \\DFS-namespace
Using the Windows Server 2008 DFSUTIL.EXE command line to manage DFS-Namespaces
http://blogs.technet.com/b/josebda/archive/2009/05/01/using-the-windows-server-2008-dfsutil-exe-command-line-to-manage-dfs-namespaces.aspx
To narrow down the issue, you could remove the DFS role to check if the issue related to the dfs namespace and dfs replication roles.
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Server 2012 Hyper-V locks up Virtual Server for no reason.
Server 2012 Hyper-V locks up virtual servers for no reason.
This is a production server. I began building this server in February. I installed the server in November. 2012 server R1 is full of bugs!
First who was the rocket scientist that decided that the TURN OFF function in Hyper-V means "Please turn off when the
F*#@$*% you feel like it"? Idiots!
I have a Supermicro server with perfect memory (for those who want to blame this on memory).
It is running 12 Virtual Servers. Every morning, at a random time, at least 1 of the servers lock up solid. Sometimes as many as 5 decide that for no reason they all want to lock up. The servers that lock up may be 1 or more: a database server, a terminal
server, an exchange server, a Windows 8.1 Ent VDI server, an IIS server, and or AD server. All 2012 R1.
They are running all current Microsoft and other vendor patches and hardware updates.
The only common denominator is the Hyper-V server.
I cannot shut them down using the Hyper-V manager. I cannot turn them off. I have a hundred users standing by while I nicely ask them to turn off. The VM will turn off after 20 minutes and a lot of gentle coaxing.
I cannot Kill the vmwp.exe process associated with the locked Virtual Machine.
No .DMP are created. No events in the event viewers. No reason at all. When they restart, there is no indication of a problem.
I ran two VMWP dumps and posted it here.
www.a1bcs.com/hyper-vlockup.zipx
Does anyone know why these are locking up?
Thanks in advance for any help.
RobertI'm not positive of the cause but I was able to stop the problems.
It turned out that Network Load Balancing (NLB) between the two terminal servers and another between the two gateways was causing the lockups.
This is a normal configuration and it should work. Especially since Microsoft has seen fit to remove the DRAIN USERS function from RDP as well as the LOCK OUT till next reboot function. JUST FYI these functions are still available at a DOS prompt
by using the CHGLOGON command. But still the NLB also provides these functions.
Anyhow, once I removed the NLB I haven't had the lockups anymore.
That doesn't however change the fact that TURN OFF should mean TURN OFF not turn off please!
Thanks again,
Robert -
A few bumps from whs to Server 2012 R2 Essentials
I'm a typical WHS user looking to upgrade (non-business use) for a simple storage area and being able to back up the laptops and PCs in the house.
Problem not solved:
Perhaps not a Server 2012 r2 Essential problem but my WDTV Live can't access the shared folders. After installing the media server add-on for Server R2 Essentials the WDTV Live is able to see the server via the media server but its messy and cluttered and
also reports no media found within folders.
With WHS I was able to view the shared folders easily. Have not been able to enable the shared folders with the WDTV Live...
Big thanks for any help, Microsoft Server 2012 R2 Essentials seems like overkill for home use but I'm really liking it.Thank you very much for the reply.
I have installed Serviio and things seem somewhat better, just getting Serviio's preferences setup. Dont' need artists/date/etc. info and I'm setting it in preferences.
Just need a simple media folder structure:
Video folder/Videofile + Videofile.jpg
Picture Folder/JPGs
Music Folder/MP3s
Was hoping share folders would be the simple way to go but WDTV still can't access shared folders from server.
Don't really need transcoding because WDTV handles the x264 and VLC handles it on the family PCs.
So close to finish now, I'll bug in another thread about anywhere access as it's just a bonus and not really needed.
Again, thank you for help, just need to figure out how to un-install the microsoft media server now... -
Memory leak issue with link server between SQL Server 2012 and Oracle
Hi,
We are trying to use the linked server feature with SQL Server 2012 to connect SQL server and Oracle database. We are concerned about the existing memory leak issue. For more context please refer to the link.
http://blogs.msdn.com/b/psssql/archive/2009/09/22/if-you-use-linked-server-queries-you-need-to-read-this.aspx
The above link talks about the issues with SQL Server versions 2005 and 2008, not sure if this is still the case in 2012. I could not find any article that talks about if this issue was fixed by Microsoft in later version.
We know that SQL Server process crashes because of the third-party linked server provider which is loaded inside SQL Server process. If the third-party linked server provider is enabled together with the
Allow inprocess option, the SQL Server process crashes when this third-party linked server experiences internal problems.
We wanted to know if this fixed in SQL Server 2012 ?So your question is more of a information type or are you really facing OOM issue.
There can be two things for OOM
1. There is bug in SQL Server which is causing the issue which might be fixed in 2012
2. The Linked server provider used to connect to Oracle is not upto date and some patch is missing or more recent version is to be used. Did you made sure that you are using latest version.
What is Oracle version you are trying to connect(9i,10g, R2...)
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?Has anyone else seen Windows Server 2012 Storage Spaces with a Simple RAID 0 (also happens with Mirrored RAID 1 and Parity RAID 5) virtual disk exhibiting extremely slow read speed of 5Mb/sec, yet write performance is normal at 650Mb/sec in RAID 0?
Windows Server 2012 Standard
Intel i7 CPU and Motherboard
LSI 9207-8e 6Gb SAS JBOD Controller with latest firmware/BIOS and Windows driver.
(4) Hitachi 4TB 6Gb SATA Enterprise Hard Disk Drives HUS724040ALE640
(4) Hitachi 4TB 6Gb SATA Desktop Hard Disk Drives HDS724040ALE640
Hitachi drives are directly connected to LSI 9207-8e using a 2-meter SAS SFF-8088 to eSATA cable to six-inch eSATA/SATA adapter.
The Enterprise drives are on LSI's compatibility list. The Desktop drives are not, but regardless, both drive models are affected by the problem.
Interestingly, this entire configuration but with two SIIG eSATA 2-Port adapters instead of the LSI 9207-8e, works perfectly with both reads and writes at 670Mb/sec.
I thought SAS was going to be a sure bet for expanding beyond the capacity of port limited eSATA adapters, but after a week of frustration and spending over $5,000.00 on drives, controllers and cabling, it's time to ask for help!
Any similar experiences or solutions?
1) Yes, being slow either on reads or on writes is a quite common situation for storage spaces. See references (with some of the solutions I hope):
http://social.technet.microsoft.com/Forums/en-US/winserverfiles/thread/a58f8fce-de45-4032-a3ef-f825ee39b96e/
http://blogs.technet.com/b/askpfeplat/archive/2012/10/10/windows-server-2012-storage-spaces-is-it-for-you-could-be.aspx
http://social.technet.microsoft.com/Forums/en-US/winserver8gen/thread/64aff15f-2e34-40c6-a873-2e0da5a355d2/
and this one is my favorite putting a lot of light on the issue:
http://helgeklein.com/blog/2012/03/windows-8-storage-spaces-bugs-and-design-flaws/
2) Issues with SATA-to-SAS hardware is also very common. See:
http://social.technet.microsoft.com/Forums/en-US/winserverClustering/thread/5d4f68b7-5fc4-4a3c-8232-a2a68bf3e6d2
StarWind iSCSI SAN & NAS -
Server 2012 (not R2) RODC fails to install Windows Updates
Good morning all
Since around October, our 80-odd 2012 (non-R2) RODCs have been failing to install windows updates, rolling them back on reboot. Patches that don't require a reboot are fine. The short version is, please log a call with MS and reference this thread, if you're
having this issue as currently they're saying they won't fix this!!
Our product support group opened an official case and reported this with Microsoft and they've found the cause. PLEASE NOTE however, that this relates to RODC and ALL patches failing, not just 3000061 on non-RODC.
There was some chat relevant to this as originally it was thought KB3000061 was to blame, and a few other people had had the same issue there (see links at the bottom). I think however, that this issue now stands alone as any patch we try to install will
fail.
000093 2015-01-23 20:18:30, Info CSI 00000015 Begin executing advanced installer phase 38 (0x00000026) index 4 (sequence 43)
000094 Old component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.16384, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000095 New component: [ml:350{175},l:348{174}]"Microsoft-Windows-Web-Services-for-Management-Core, Culture=neutral, Version=6.2.9200.17100, PublicKeyToken=31bf3856ad364e35, ProcessorArchitecture=wow64, versionScope=NonSxS"
000096 Install mode: install
000097 Installer ID: {118ca598-79a0-4297-953d-e82183960fd2}
000098 Installer name: [13]"Group Trustee"
000099 2015-01-23 20:18:30, Error CSI 00000001@2015/1/23:20:18:30.673 (F) CMIADAPTER: Inner Error Message from AI HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000100 [
000101 (null)
000102 ]
000103 [gle=0x80004005]
000104 2015-01-23 20:18:30, Error CSI 00000002@2015/1/23:20:18:30.673 (F) CMIADAPTER: AI failed. HRESULT = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED)
000105 Element:
000106 [372]"<groupTrustee xmlns="urn:schemas-microsoft-com:asm.v3" name="WinRMRemoteWMIUsers__" description="Members of this group can access WMI resources over management protocols (such as WS-Management via the Windows Remote Management service). This applies only to WMI namespaces that grant access to the user." type="User" enabled="true">
000107
000108 <members></members>
000109
000110 </groupTrustee>"
000111 [gle=0x80004005]
000112 2015-01-23 20:18:30, Error CSI 00000003@2015/1/23:20:18:30.673 (F) CMIADAPTER: Exiting with HRESULT code = HRESULT_FROM_NT(STATUS_NOT_SUPPORTED).
000113 [gle=0x80004005]
Cause:
The installer uses SAM API calls to manage the group. It always connects to the local SAM instance. The component also handles an uninstall task in the same function. On uninstall the group is being deleted.
So the SAM handle is requested with "Create Group" and "Delete" access.
The error happens because a RODC does not allow any changes and thus returns STATUS_NOT_SUPPORTED.
More information about the prevent from accidental deletion feature please refer :
http://technet.microsoft.com/en-us/library/cc773347(v=WS.10).aspx
http://technet.microsoft.com/en-us/library/cc739350(v=WS.10).aspx
Recommendation:
This is a Bug in the RODC running on server 2012, However you may do an in place upgrade to Server 2012 R2 and then proceed with the installation of the patch.
The bad news is this is fixed in 2012 R2 with a hotfix - but it isn't fixed in 2012 and it won't be because.. they've only had one official report logged. And that was by us. So, if you want this fixed, you need to start logging this with MS now.
What I can say just now is that this isn't related to the registry fixes with WinEVT we've all been trying, it's NOT limited to 2008 that has been upgraded in place to 2012 (our product support group replicated it in the lab with a brand new 2012 promoted
to RODC) and it IS only happening with RODC. Possible fix might be to make your RODC RW for a bit and install your patches then.
Background reading:
https://social.technet.microsoft.com/Forums/en-US/f77691d8-a9d0-4714-98ad-71665cfa8965/kb3000061-fails-to-install-on-server-2012?forum=winserver8gen
https://social.technet.microsoft.com/Forums/en-US/70219bcb-36a8-466e-900b-cbf390db38d2/failure-configuring-windows-updates-reverting-changes-postreboot-status-0x800f0922?forum=winserver8genThe error indicates that IIS is returning a "404 not found" error back to the Windows Update Agent. That might mean that you need to specify the correct port that WSUS is listening on, e.g.:
WSUSServer=http://yourserver:8530
Thanks,
-Michael Niehaus
Senior Product Marketing Manager, Windows Deployment
http://blogs.technet.com/mniehaus
[email protected] -
We have a problem with one of our deployments of Windows Server 2012 Hyper-V with a 2 node cluster connected to a iSCSI SAN.
Our setup:
Hosts - Both run Windows Server 2012 Standard and are clustered.
HP ProLiant G7, 24 GB RAM. This is the primary host and normaly all VMs run on this host.
HP ProLiant G5, 20 GB RAM. This is the secondary host that and is intended to be used in case of failure of the primary host.
We have no antivirus on the hosts and the scheduled ShadowCopy (previous version of files) is switched off.
iSCSI SAN:
QNAP NAS TS-869 Pro, 8 INTEL SSDSA2CW160G3 160 GB i a RAID 5 with a Host Spare. 2 Teamed NIC.
Switch:
DLINK DGS-1210-16 - Both the network cards of the Hosts that are dedicated to the Storage and the Storage itself are connected to the same switch and nothing else is connected to this switch.
Virtual Machines:
3 Windows Server 2012 Standard - 1 DC, 1 FileServer, 1 Application Server.
1 Windows Server 2008 Standard Exchange Server.
All VMs are using dynamic disks (as recommended by Microsoft).
Updates
We have applied the most resent updates to the Hosts, VMs and iSCSI SAN about 3 weeks ago with no change in our problem and we continually update the setup.
Normal operation:
Normally this setup works just fine and we see no real difference in speed in startup, file copy and processing speed in LoB applications of this setup compared to a single host with two 10000 RPM Disks. Normal network speed is 10-200 Mbit, but occasionally
we see speeds up to 400 Mbit/s of combined read/write for instance during file repair.
Our Problem:
Our problem is that for some reason a random VHDX gets copied to System Volume Information by "System" of the Clusterd Shared Storage (i.e. C:\ClusterStorage\Volume1\System Volume Information).
All VMs stops responding or responds very slowly during this copy process and you can for instance not send CTRL-ALT-DEL to a VM in the Hyper-V console, or for instance start task manager when already logged in.
This happens at random and not every day and different VHDX files from different VMs gets copied each time. Some time it happens during daytime wich causes a lot of problems, especially when a 200 GB file gets copied (which take a lot of time).
What it is not:
We thought that this was connected to the backup, but the backup had finished 3 hours before the last time this happended and the backup never uses any of the files in System Volume Information so it is not the backup.
An observation:
When this happend today I switched on ShadowCopy (previous files) and set it to only to use 320 MB of storage and then the Copy Process stopped and the virtual Machines started responding again. This could be unrelated since there is no way to see
how much of the VHDX that is left to be copied, so it might have been finished at the same time as I enabled ShadowCopy (previos files).
Our question:
Why is a VHDX copied to System Volume Information when scheduled ShadowCopy (previous version of files) is switched off? As far as I know, nothing should be copied to this folder when this functionis switched off?
List of VSS Writers:
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Writer name: 'Task Scheduler Writer'
Writer Id: {d61d61c8-d73a-4eee-8cdd-f6f9786b7124}
Writer Instance Id: {1bddd48e-5052-49db-9b07-b96f96727e6b}
State: [1] Stable
Last error: No error
Writer name: 'VSS Metadata Store Writer'
Writer Id: {75dfb225-e2e4-4d39-9ac9-ffaff65ddf06}
Writer Instance Id: {088e7a7d-09a8-4cc6-a609-ad90e75ddc93}
State: [1] Stable
Last error: No error
Writer name: 'Performance Counters Writer'
Writer Id: {0bada1de-01a9-4625-8278-69e735f39dd2}
Writer Instance Id: {f0086dda-9efc-47c5-8eb6-a944c3d09381}
State: [1] Stable
Last error: No error
Writer name: 'System Writer'
Writer Id: {e8132975-6f93-4464-a53e-1050253ae220}
Writer Instance Id: {7848396d-00b1-47cd-8ba9-769b7ce402d2}
State: [1] Stable
Last error: No error
Writer name: 'Microsoft Hyper-V VSS Writer'
Writer Id: {66841cd4-6ded-4f4b-8f17-fd23f8ddc3de}
Writer Instance Id: {8b6c534a-18dd-4fff-b14e-1d4aebd1db74}
State: [5] Waiting for completion
Last error: No error
Writer name: 'Cluster Shared Volume VSS Writer'
Writer Id: {1072ae1c-e5a7-4ea1-9e4a-6f7964656570}
Writer Instance Id: {d46c6a69-8b4a-4307-afcf-ca3611c7f680}
State: [1] Stable
Last error: No error
Writer name: 'ASR Writer'
Writer Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Instance Id: {fc530484-71db-48c3-af5f-ef398070373e}
State: [1] Stable
Last error: No error
Writer name: 'WMI Writer'
Writer Id: {a6ad56c2-b509-4e6c-bb19-49d8f43532f0}
Writer Instance Id: {3792e26e-c0d0-4901-b799-2e8d9ffe2085}
State: [1] Stable
Last error: No error
Writer name: 'Registry Writer'
Writer Id: {afbab4a2-367d-4d15-a586-71dbb18f8485}
Writer Instance Id: {6ea65f92-e3fd-4a23-9e5f-b23de43bc756}
State: [1] Stable
Last error: No error
Writer name: 'BITS Writer'
Writer Id: {4969d978-be47-48b0-b100-f328f07ac1e0}
Writer Instance Id: {71dc7876-2089-472c-8fed-4b8862037528}
State: [1] Stable
Last error: No error
Writer name: 'Shadow Copy Optimization Writer'
Writer Id: {4dc3bdd4-ab48-4d07-adb0-3bee2926fd7f}
Writer Instance Id: {cb0c7fd8-1f5c-41bb-b2cc-82fabbdc466e}
State: [1] Stable
Last error: No error
Writer name: 'Cluster Database'
Writer Id: {41e12264-35d8-479b-8e5c-9b23d1dad37e}
Writer Instance Id: {23320f7e-f165-409d-8456-5d7d8fbaefed}
State: [1] Stable
Last error: No error
Writer name: 'COM+ REGDB Writer'
Writer Id: {542da469-d3e1-473c-9f4f-7847f01fc64f}
Writer Instance Id: {f23d0208-e569-48b0-ad30-1addb1a044af}
State: [1] Stable
Last error: No error
Please note:
Please only answer our question and do not offer any general optimization tips that do not directly adress the issue! We want the problem to go away, not to finish a bit faster!Hallo Lawrence!
Thankyou for youre reply, some comments to help you and others who read this thread:
First of all, we use Windows Server 2012 and the VHDX as I wrote in the headline and in the text in my post. We have not had this problem in similar setups with Windows Server 2008 R2, so the problem seem to be introduced in Windows Server 2012.
These posts that you refer to seem to be outdated and/or do not apply to our configuration:
The post about Dynamic Disks:
http://technet.microsoft.com/en-us/library/ee941151(v=WS.10).aspx is only a recommendation for Windows Server 2008 R2 and the VHD format. Dynamic VHDX is indeed recommended by Microsoft when using Windows Server 2012 (please look in the optimization guide
for Windows Server 2012).
Infact, if we use fixed VHDX then we would have a bigger problem since fixed VHDX are generaly larger then Dynamic Disks, i.e. more data would be copied and that would take longer time = the VMs would be unresponsive for a longer time.
The post "What's the deal with the System Volume Information folder"
http://blogs.msdn.com/b/oldnewthing/archive/2003/11/20/55764.aspx is for Windows XP / Windows Server 2003 and some things has changed since then. for instance In Windows Server 2012, Shadow Copies cannot be controlled by going to Control panel -> System.
Instead you right-click on a Drive (i.e. a Volume, for instance the C drive/Volume) in Computer and then click "Configure Shadow Copies".
Windows Server 2008 R2 Backup problem
http://social.technet.microsoft.com/Forums/en/windowsbackup/thread/0fc53adb-477d-425b-8c99-ad006e132336 - This post is about the Antivirus software trying to scan files used during backup that exists in the System Volume Information folder and we do not
have any antivirus software installed on our hosts as I stated in my post.
Comment that might help us:
So according to “System Volume Information” definition, the operation you mentioned is Volume Shadow Copy. Check event viewer to find Volume Shadow Copy related event logs and post them.
Why?
Furhter investigation suggests that a volume shadow copy is somehow created even though the Schedule for Shadows Copies is turned off for all drives. This happens at random and we have not found any pattern. Yesterday this operation took almost all available
disk space (over 200 GB), but all the disk space was released when I turned on scheduled Shadow Copies for the CSV.
I therefore draw these conclusions:
The CSV Volume has about 600 GB of disk space and since Volume Shadows Copy used 200 GB, or about 33% of the disk space, and the default limit is 10% then I conclude that for some reason the unscheduled Volume Shadow Copy did not have any limit (or ignored
the limit).
When I turned on the Schedule I also change the limit to the minimum amount which is 320 MB and this is probably what released the disk space. That is, the unscheduled Volume Shadow Copy operation was aborted and it adhered to the limit and deleted the
Volume Shadow Copy it had taken.
I have also set the limit for Volume Shadow Copies for all other volumes to 320 MB by using the "Configure Shadow Copies" Window that you open by right clicking on a drive (volume) in Computer and then selecting "Configure Shadow Copies...".
It is important to note that setting a limit for Shadow Copy Storage, and disabaling the Schedule are two different things! It is possible to have unlimited storage for Shadow Copies when the Schedule is disabled, however I do not know if this was the case
Before I enabled Shadow Copies on the CSV since I did not look for this.
I now have defined a limit for Shadow Copy Storage to 320 MB on all drives and then no VHDX should be copied to System Volume Information since they are all larger than 320 MB.
Does this sound about right or am I drawing the wrong conclusions?
Limits for Shadow Copies:
Below we list the limits for our two hosts:
"Primary Host":
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
For volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\)\\?\Volume{e3ad7feb-178b-11e2-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (91%)
Shadow Copy Storage association
For volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
Shadow Copy Storage volume: (E:)\\?\Volume{dc0a177b-ab03-44c2-8ff6-499b29c3d5cc}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (0%)
Shadow Copy Storage association
For volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
Shadow Copy Storage volume: (G:)\\?\Volume{f58dc334-17be-11e2-93ee-9c8e991b7c20}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (3%)
Shadow Copy Storage association
For volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (C:)\\?\Volume{e3ad7fec-178b-11e2-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 320 MB (0%)
C:\>cd \ClusterStorage\Volume1
Secondary host:
C:\>vssadmin list shadowstorage
vssadmin 1.1 - Volume Shadow Copy Service administrative command-line tool
(C) Copyright 2001-2012 Microsoft Corp.
Shadow Copy Storage association
For volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\)\\?\Volume{b2951138-f01e-11e1-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 35,0 MB (10%)
Shadow Copy Storage association
For volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
Shadow Copy Storage volume: (D:)\\?\Volume{5228437e-9a01-4690-bc40-1df85a0e6736}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 27,3 GB (10%)
Shadow Copy Storage association
For volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
Shadow Copy Storage volume: (C:)\\?\Volume{b2951139-f01e-11e1-93e8-806e6f6e6963}\
Used Shadow Copy Storage space: 0 bytes (0%)
Allocated Shadow Copy Storage space: 0 bytes (0%)
Maximum Shadow Copy Storage space: 6,80 GB (10%)
C:\>
There is something strange about the limits on the Secondary host!
I have not in any way changed the settings on the Secondary host and as you can see, the Secondary host has a maximum limit of only 35 MB storage on the CSV, but it also shows that this is 10% of the Volume. This is clearly not the case since 10% if 600
GB = 60 GB!
The question is, why does it by default set a too small limit (i.e. < 320 MB) on the CSV and is this the cause of the problem? I.e. is the limit ignored since it is smaller than the smallest amount you can provide using the GUI?
Is the default 35 MB maximum Shadow Copy limit a bug, or is there any logical reason for setting a limit that according to the GUI is too small?
Maybe you are looking for
-
Caseid 4670247907 worst customer support ever seen
caseid 4670247907 today was 15 day of my camplain log i have been provided with replacenet of defective part 2 times but both them self required replacement. this is the worst service support i have seen
-
Checking"ok "made mandatory for subcontracting po goods receipt
Dear Experts, while making goods receipt against subcontracting PO,user mistakenly unchecked the OK the for the components. and posting the documents.due to this consumption is not updated with 543 movement , but finished product is updated. its le
-
How to control formatting of include text in smartform
Hello Everyone - I have converted sales order acknowledgements from sapscript to smartform. I need to print material sales text at line level. Include text method is being used, it works in most cases. However, in some cases the Std Paragraph format
-
Can we Read/Display the content of Word/PDF file in Flex 3/4 ?
Hello All, Can we read/display the content of Word/PDF file in Flex 3 or Flex 4?. I have one word file containing Arabic and English content with some settings like Bold, Color, Align etc. I want to display the content of this word file as it is
-
Hello, We have a scenario where, sometimes for a given PO we receive the invoice from the vendor before we receive the GR. Then, after we receive the invoice, if someone decides to cancel the order they go ahead and delete all the PO line items. And