BUG: - iPod Nano Software - Clock - Arizona no longer in MST

This is a pretty simple one. Since Arizona started observing Daylight Savings time, they also now observe PST clocks which the iPod Nano software does not reflect.
I'm willing to bet this is a bug across more products than just the iPod Nano software.

I'd be willing to bet that Apple considers the
updated behavior to be the "Correct" behavior.
According to the Apple Nano Features Guide:
"Turn on backlight - If the backlight timer is set to Off, press and hold Menu to turn on the backlight"
I would argue that the issue I am experiencing after update is not the correct behavior. Every iPod made, save the shuffle, functioned this same way: hold the menu button for 1-2 seconds to enable backlight.

Similar Messages

Ipod Nano software on 20gig iPod

Yo, do u reckon that the iPod Nano software with the world clock etc will be avalable for the iPod 20gig?

Chris,
Noone is able to answer that. In fact, speculating is conflicting with the term of use on the Apple Discussions. It will get a topic locked or removed by the moderators.
But you can give feedback to Apple here.
JJ

TS1363 My ipod nano 5th generation is no longer recognized by itunes, and won't play any of it's music. It still shows it all listed, but freezes up if you select a song to play. Is there a way to restore it?

My ipod nano 5th generation will no longer play any of it's loaded songs. It still plays the video that is on it, and the radio works. It is not recognized by itunes and I have gone through all their help steps. Is there some other way to restore it?

If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
Make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar

I have updated to windows 8.1 from windows 8. My ipod nano (6th gen) is no longer identified properly in itunes. I have tried all steps in the troubleshooting guide but it has not resolved the issue. What can I do?

My ipod nano (6th gen) is no longer identied properly in itunes. I have followed all steps in the troubleshooting guide (uninstall and reinstall itunes several times, Apple Mobile Device running ok, verified USB port runs) but the issue is still not resolved. What can I do?

Universal Serial Bus controllers
     Intel(R) ICH9 Family USB Universal Host Controller - 2934
     Intel(R) ICH9 Family USB Universal Host Controller - 2935
     Intel(R) ICH9 Family USB Universal Host Controller - 2936
     Intel(R) ICH9 Family USB Universal Host Controller - 2937
     Intel(R) ICH9 Family USB Universal Host Controller - 2938
     Intel(R) ICH9 Family USB Universal Host Controller - 2939
     Intel(R) ICH9 Family USB Universal Host Controller - 293A
     Intel(R) ICH9 Family USB Universal Host Controller - 293C
     USB Composite Device
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
     USB Root Hub
I'm not sure if it charged when I hooked it up to my roommate's computer, but it definately didn't register either. If I put it on the dock it plays so the port is fine, but that still doesn't help me sync it to my computer.

HT1483 I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is wor

I get a message "The Itunes server could not be contacted, check your internet connection" when trying to check for Ipod Nano software updates. I have a 1st generation Nano and haven't updated the software for a while. My internet connection is working. Was thre a change in the internet address for NANO software updates? Do I have to reconfigure something in Itunes to point to the correct address?

What version of iTunes are you using? The latest is 10.6.3. In iTunes, choose Help -> About iTunes to check the version number. If it's lower than 10.6.3, download the latest version from here.
B-rock

Ipod nano world clock

my ipod nano's clock is half an hour ahead though my settings are correcti am living in mumbai and so has set karachi as my time.ther is no adjustment and this clock is independent of the digital clock setting .plz suggest
nath

dear kiran,
well i got my nano just a week back and all looks fine.since its paper thin and very delicate you have to take good care of it in handling.the piece looks cute and has a very good sound quality .i have already downloaded songs and around 50 pics.pics show out decent.just one thing to remember dont remove the inner transparent covering on the nano to protect your screen and body.as of now i am pleased with my nano.
regards
nath

Ipod nano alarm clock

Hi guys, help needed
I was sent an email from Apple saying that i can use my ipod nano as an alarm clock, and thats true...i can, however it also said, wake up to your favourite track......
heres the problem, all i can get is a setting for a beep, not to have it come alaive at the set time with my favourite track...
any ideas appreciated
I have the latest software, and use Nike+ on windows xp verion 2
any help appreciated
mick

The track you want to wake up to must be in a playlist.
So, create a playlist (with just one track if that's all you want) and select this to wake up to.
http://www.apple.com/support/ipod101/maximize/4/#2

My ipod nano generation 3 is no longer recognized in itunes, my ipod nano generation 3 is no longer recognized in itunes

My Ipod nano generation 3 is not being recognized by itunes as a device? It shows it connected by doesnt sync

Thanks KT, after following your advice the iPod nano and the two cameras are now visible in iTunes or iPhoto and also in Finder.
The cameras continue to work consistently with iPhoto but since trying to complete a 'Restore' with the iPod nano I've had a string of error messages and it is now no longer useable. I'll be posting for help on this in the iPod discussion forum.

IPod Nano (5g) and cameras no longer appearing in iTunes or iPhoto

I've recently been successfully syncing my iPod nano (5g) with iTunes v9.0.1 and two digital cameras with iPhoto '09 v8.1 - all on OS 10.6.1
However last night my iPod nano was rejected by iTunes (error message I can't remember) and now the cameras are no longer recognised by iPhoto. So when I plug in either the iPod nano or either of the cameras none of them are recognised by iTunes or iPhoto and none of them appear in a Finder window.
I've had a look at the Discussion boards and repeatedly tried rebooting but am still stuck. Also, plugging these peripherals into different USB ports has not made a difference.
Another point which could be related... despite repeated attempts to Shut Down or Restart, each time the Shut Down does not quite complete (even after 10-15 mins) and I need to physically power off the Mac using the power button.
Any ideas? Thanks,
Simon

Thanks KT, after following your advice the iPod nano and the two cameras are now visible in iTunes or iPhoto and also in Finder.
The cameras continue to work consistently with iPhoto but since trying to complete a 'Restore' with the iPod nano I've had a string of error messages and it is now no longer useable. I'll be posting for help on this in the iPod discussion forum.

Problems with ipod nano world clock...

i bought my ipod nano yesterday... and i cant get the clock working properly... everything is ok... i mean i select the time zone put my local time add a clock from a city in south america (that has 2 hours of difference) i am in miami FL, USA and i select the time zone and all that and put the time and add that city and it works ok the time is right... but when i plug the ipod to the pc the clock completely desconfigurates.... and the time from that city is wrong... is or 3 hours of diference or 1 hours of diference and so on.. it never stays exactly as how i put it... someone can help me??

dear kiran,
well i got my nano just a week back and all looks fine.since its paper thin and very delicate you have to take good care of it in handling.the piece looks cute and has a very good sound quality .i have already downloaded songs and around 50 pics.pics show out decent.just one thing to remember dont remove the inner transparent covering on the nano to protect your screen and body.as of now i am pleased with my nano.
regards
nath

Error when installing ipod nano software

When I try to load the software for my ipod nano I receive the following error
1601:unable to install installshield scripting runtime
I have tried all of the solutions offered but still no luck

OMG! You could sub-title this: "Why Windows Blows" ... I bought a new iPod for my wife - I have to install the sw on the loser windows box because she uses that box.
The iPod (cd) and/or the iTunes (apple.com download) install blows up either under my admin/unrestricted account, or as her limited-user account with the errors described above. I've followed all the links, etc., and jumped through all the hoops but I still get the %#$! 1607 error.
When I try, as a windows "super-user" <snort> to reset the perms on the windows/Installer directory, it gives me the appearance of allowing me to uncheck the box and take the directory out of read-only more, but it doesn't actually reset the directory permissions.
Since windows isn't smart enough to have an equivalent of a chmod 775 command....it looks like we're hosed.
I'm subscribing to the thread in the hopes that someone can actually figure out how to install this software on Windows successfully....until then, I guess she'll have to manage her iPod on my one of my Macs if it will support multiple iPods....
Hey ... Apple - how about itunes/ipod support for linux?
Sigh...frustrated beyond belief; I feel so unclean every time I have to use a windows system...
--Mike

IPod nano software + windows 7

Recently I got a new laptop which has windows 7 on it. When I installed iTunes on it, it worked fine but then when I installed the software to connect my first generation iPod nano to my computer I started having problems.
After installation when I open iTunes a message comes up saying "Software required for communicating with iPods not installed correctly. Do you want to repair iTunes?"
After it does the repair iTunes will open but when I connect my iPod another message saying "Software required for communicating with iPod not installed correctly. Please reinstall iTunes to install the iPods software."
I have uninstalled and reinstalled iTunes and the software countless times and it still doesn't work. I have also gone back and made sure all parts of iTunes such as Bonjour were uninstalled as well. Nothing seems to work. Recently I also reinstalled iTunes and my iPod software on another computer and it worked fine. The only difference was my other computer was windows xp.
Help?

UPDATE:
While the iPod Nano would not even turn on in the two computers I tried earlier at home (and posted above about), when I plugged it in on my work computer (PC, Windows 7), the iPod Nano turned on fine as a brand new set up on this computer's iTunes and now it is working.
Very strange that it would crap out at home every time even though I changed the drive letter and followed all the other instructions.
I have to yet check if I can sync at home or not or if it will ask me to restore again!

IPod nano Software Download - Files are corrupt

Just purchased an iPod nano. Tried to install the software. When it reached the iTunes portion it flashed a message that "Some installation files are corrupt. Please download a fresh copy and retry the installation." I went to the website and did that. Results were the same. Ideas?
Gateway Windows XP

There is a simple solution to your problem:
INSTALL WINAMP & PLUGIN
The plugin can be found here
http://sourceforge.net/project/showfiles.php?group_id=106528
They also have a Tutorial (which I did not need)
http://www.mlipod.com/?page=documentation
This solution is for free (I mean the software of course ...

IPod Nano Software CD

My granddaughter purchased an iPod Nano from a friend but did not get a software CD to install in her computer. Can we obtain this software CD somewhere? Also, is this required to delete existing songs on the iPod. Thank you.

Here are two tutorials you will find helpful if this is your first iPod.
iPod Tutorial.
iTunes Tutorial.
And a merry Xmas to you too.
Mac Mini Super Drive; 1GB RAM; 20" Cinema Display; Airport Extreme; Maxtor 250G Mac OS X (10.4.3) iPod 60GB (video); iPod 60GB (colour); 4GB nano.

IPod Nano International Clock Settings

I live in India and recently bought an iPod Nano. I wanted to use the International Clocks but the timing listed for the European cities as well as the Asian cities is wrong by exactly half an hour ahead of the real time.
Apple India are saying there is nothing they can do as there is no option to change manually the time on the listed cities. My Nano shows the correct time as I entered it manually, but I wanted to get some of the European cities as well.
Does anyone know how to solve the problem???

Could be something to do with Daylight Saving Time. Set the clock to the "wrong" time then select daylight saving time and adjust it either on or off, this could change the time. Other than that, send it in for a service.

BUG: - iPod Nano Software - Clock - Arizona no longer in MST

Similar Messages

Maybe you are looking for