BUG: Keyframe Curve Display in Effects Controls Panel Broken

I noticed a bug a while back. Hope it would have been fixed by now, but it's not so I'm here reporting it. I can't remember if I was having the same problem before the 2014.2 update, but I know it wasn't a problem in earlier versions of Premiere Pro CC.
Add a keyframe to an audio layer
Add a second keyframe to the audio layer, and adjust the levels
Convert one of the keyframes to an Ease or Bezier keyframe
Watch as the graphic that should show you the curve flatlines
Here's an example image. I have Windows 8.1 scaling on, so everything is %150 bigger in this graphic, but I was having this bug before on my 1080p monitor (at 100% scaling), so I can promise is has nothing to do with that.
Legend:
Red is what I currently see
Green is what I'd expect to see
Functionally, the bezier curve does appear to affect what I'm applying it to. So the only problem that I can see here is that the grey graphical representation of the curve is wrong.
Is anyone else able to reproduce this? On Mac? Windows? Etc...

Hi TeeKay,
Tim K wrote:
I noticed a bug a while back. Hope it would have been fixed by now, but it's not so I'm here reporting it. I can't remember if I was having the same problem before the 2014.2 update, but I know it wasn't a problem in earlier versions of Premiere Pro CC.
Add a keyframe to an audio layer
Add a second keyframe to the audio layer, and adjust the levels
Convert one of the keyframes to an Ease or Bezier keyframe
Watch as the graphic that should show you the curve flatlines
Here's an example image. I have Windows 8.1 scaling on, so everything is %150 bigger in this graphic, but I was having this bug before on my 1080p monitor (at 100% scaling), so I can promise is has nothing to do with that.
Legend:
Red is what I currently see
Green is what I'd expect to see
Functionally, the bezier curve does appear to affect what I'm applying it to. So the only problem that I can see here is that the grey graphical representation of the curve is wrong.
Is anyone else able to reproduce this? On Mac? Windows? Etc...
Thanks for reporting. Can you file a bug report? http://adobe.ly/ReportBug
Thanks,
Kevin

Similar Messages

Markers in the Effect Controls Panel

I'm up to page 165 of the Premiere 6 manual, trying to understand markers, and it says:
Create markers in the Effect Controls panel
In the Effect Controls panel, you can view all of the markers that you created in the Timeline panel. You can also add markers to your sequence to designate where you would like to place effects and see the markers as you work in the Effect Controls panel. In addition, you can create and manipulate markers directly in the Effect Controls panel.
1. Drag the playhead to the place where you want to create a marker.
2. Right-click (Windows) or Control-click (Mac OS) in the timeline ruler:
In Premiere Pro CS5.5, and earlier, choose Set Sequence Marker, and then choose the type of marker you want to set.
In Premiere Pro CS6, choose Add Marker, or press the M key.
I follow those instructions to the best of my ability, and nothing appears in the Effect Controls Panel. The previous three paragraphs are labelled as CS5.5 and earlier. I'm wondering if this paragraph should also have been labelled as CS5.5 and earlier.
In CS6, do markers appear in the Effect Controls panel? If they do, how do you get them to appear?

Thanks Jeff. My Effect Controls timeline was hidden. I don't remember it even being there, but I suppose it must have been at some stage.
Now, another Marker matter. At the bottom of page 165 it states:
"Move a marker
Do one of the following:
To move a clip marker in a clip that’s in a sequence, open the clip in the Source Monitor and drag the Marker icon in the Source Monitor’s time ruler. (You can’t manipulate clip markers in the Timeline panel)."
This is what I've done:
In the Source Monitor I set up a marker for a particular clip. Three things happen.
An empty grey Marker appears above the Timeline in the Source Monitor (that Marker disappears if I move the Playhead).
Two green Markers appeared inside the clip in the Sequence Panel (those Markers stay put).
The Marker details appear in the Marker Panel.
I can cause the Marker to move if I change the In and Out points in the Marker Panel, but I cannot "drag the Marker icon in the Source Monitor’s time ruler." I can't see any Marker, except the empty grey one.

Autoscroll the 'Effects Control' panel

CS4: How do I get the Effect Control Panel to autoscroll like the timeline does? The current time marker scrolls right off the end of the panel.

You can't.

Controls in Effect Controls Panel are twirled close. How to open them?

I have a question please .The chapter 211 in Adobe Premier Pro CC 2014 classroom in a book show me that I may to adjust an ease lines ,in a Effect controls panel .It is look like that.
So , when I look at to my Premier Pro Effect controls panel ,I simply haven't these lines.And here is my Effect controls.Where they are?

You need to click on the disclosure triangle next to the effect name to reveal the lines:
MtD

I have a 4101 mfp with no display on the control panel?

I have a HP 4101 mfp printer C9149A with no display or LED lights on the control panel, I have replaced the control panel, formatter and the PCB connector. Any suggestions.

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Laserjet board here:
http://h30499.www3.hp.com/t5/Printers-LaserJet/bd-p/bsc-413
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Mail x64 Control Panel Broken, Can't Install Office 2013 SP1 to Fix It - HELP NEEDED

I have the dreaded broken Mail x64 Control Panel that doesn't work after installing Office 2013 Home and Business on a Windows 8.1 Pro computer. This was a fresh installation, yet Microsoft still has an ancient disk image on their Office.com website
for download. The version is 15.0.4433.1507. It's from 2012! I don't understand the purpose of having people download something if you are not even going to keep it up to date, and have them download programs which you know are broken.
Strike 1.
Another thread said to update Office 2013. Easier said than done. Windows Update won't do it, even if Windows Update is manually told to search for updates. Strike 2.
Another thread said to disable updates inside an office program (File, Account, Update Options). Then Enable it, and updating should start immediately. Nope. Strike 3.
Same thread said if the above didn't work, to go to Uninstall Programs, and run a Repair of Office 2013. Did that, and then it wanted the Product Key again. Gave it the product key, it put a green check mark next to it signifying it was good,
and then when I clicked next, it said it couldn't activate it. I clicked the Repair button, and the program closed. Strike 4.
I uninstalled, and reinstalled Office 2013. I downloaded the Office 2013 Service Pack 1 x64, and ran it. It gives the error message "There are no products affected by this package installed on the system". How could that be?
Article ID 2850036 says specifically that it applies to "Microsoft Office Home and Business 2013". Since when can't you install Service Packs? Strike 5.
Anyone have any ideas?
Michael

Hi Michael,
The issue may occur if the registry entries are corrupted or missing. Usually, repair the Office suite from control panel can fix the issue.
For your case, I would suggest you to run Microsoft Fix It tool (or follow the
manual steps listed in follow article
) to uninstall Office 2013 completely from your computer, then do a re-installation and verify the result:
http://support.microsoft.com/kb/2739501/en-us
If you are able to login to
www.office.com/myaccount, then you can get the latest Office installation file there.
More reference: http://support.microsoft.com/kb/2808266/en-us
Sorry for the inconvenience. Please have a try and feel free to post back.
Thanks,
Ethan Hua CHN
TechNet Community Support

IE 11 zoom default 125% based on display settings in control panel.

Using Windows 7 Enterprise with 2 displays I have my display settings set to increase windows objects and text by 125%. IE 11 appears to compound this by defaulting to 125% zoom on startup default. If I set the display
control back to 100 the default on IE goes back to 100% as well. How do I get IE to default to 100 when the display is set for 125% Based on another post I checked IE ZoomFactor in the current user key and found it to be the recommended 100000.
and ResetTextSizeOnStartup and ZoomOnStartup are set to 1. Changes to these does not seem to have an effect.

Hi，
I test the issue and have the same result as yours, the value of ZoomFactor remains 100000. As a workaround, I change the value to Decimal:80000 (or Hexadecimal: 13880) then F5 to refresh the registry, reopen IE, it goes back to 100%, my registry setting
as below
[HKEY_CURRENT_USER\Software\Microsoft\Internet Explorer\Zoom]
"ZoomDisabled"=dword:00000000
"ResetTextSizeOnStartup"=dword:00000000
"ResetTextSizeOnZoom"=dword:00000001
"ResetZoomOnStartup"=dword:00000001
"ResetZoomOnStartup2"=dword:00000000
"ZoomFactor"=dword:00013880
Yolanda Zhu
TechNet Community Support

Controlling effects control panel

In CC, at at early point in the timeline, the effects playhead goes offscreen in the effects panel, and no matter what I do, it won't come back into view, zooming in or out, changing to audio display units, playing with the "gray" bar at the bottom, making sure that the clip is at the beginning of the timeline, , etc.
Help!

I think I've got it. A nested multi-camera time line, with effects added to it --- each shift to a new camera loses the old effects.
Thanks.

Effects Control panel in the source window

Is there a way to prevent Premeire 5.5 from burying the Effects tab on the source/viewer window (the one on the left) - I don't know what I'm doing wrong, but I have to keep expanding that panel's workspace just to find the effects tab.
Thanks everyone for all your help!

Dock, group, or float panels

I cannot edit the Cross Dissolve in the Effects Control Panel in Premiere Pro CC 2014

If I put a film dissolve between two clips on my timeline, and then click on the film dissolve, I'm able to go to my Effects Window and drag clip A (Top Bar) to the right and trim lets say 3 seconds then go to Clip B (Bottom Bar) and drag to the left to take off lets say 10 seconds off the beginning of clip B. That very method worked for cross dissolves until this latest update for CC 2014. It forces me to use ripple edit in the timeline on each endpoint of each clip instead of flying through it in the effects window by clicking each dissolve in the time line. It's just weird that they would take that out for only the cross dissolve which I prefer using more than anything and not the rest of the dissolves. Does anyone have a clue why? Or is this a bug?

That is correct. This is the only transition where the workflow has changed.
You can now make it into a preset.
BTW I dont use it often but i dont like it either not being able to adjust the cross dissolve in the EC.

Masking & Tracking Ellipse, Pen, and 4-Point Polygon (square) tools missing from the Effect Controls panel

I am trying to mask a small area of some of the shots I am using for a small teaser. The three tools that are supposed to present themselves on the effects tab when I select an effect such as "Brightness and Contrast" are not there. Does anyone know another way to use these tools, or how to add them to the effects tab?

What version of PPro are you running?
Its only available on recent versions. Not sure 1st but CC2014.1 onward maybe .

Premiere pro cs 6 - 2 issues; keyframe interpolation & seeing final keyframe in effects control pan

#1
I'm zooming and/or panning in on a photograph that has 2 dissolves (1 at the start and 1 at the end). I put a zoom effect by using the Effects Control panel. Keyframe 1 is at the beginning of the picture, or 1st dissolve, and the 2nd keyframe is at the end of the picture, or the 2nd dissolve. At first the zoom/pan is slow and even but then it speeds up about 1/2 way through the 5 second picture. Any suggestions on how to make it more even? I've tried changing the temporal and spacial effect on the keyframes but generally it doesn't work.
#2
In the effects panel, if I have a keyfram at the very end of the clip I can't see it even by changing the landscape or widening the effects control project window. Again, any suggestions?

1. Try keyframing before adding transitions.
2. Unselect Pin to Clip in the panel menu of the Effect Controls.

How do I call a LabView VI via dll to display its control panel in a tab of my uir in LabWindows

Hi User Community,
I am trying to build a LabWindows Top Level Control Panel to call individual LabView VI's, which have been compiled into a dll.
I have no problem using the CmtScheduleThreadPoolFunction to start a new thread that calls these VI's however, I'm having trouble trying to get the display that comes up in it's own window to display in a tab of my existing UIR.
I've compiled the DLLs to always display the VI Control Panel window when running - and usually it covers the whole screen you can't see the LabWindows window until the VI completes.
Is there a definitive guide to LabWindows Windows/Panels/Tabs? Or does anyone have experience with this? Any help would be appreciated.

Hello,
I would suggest reviewing the Programming with Panels and Programming with Tabs CVI Help documents. I think that this can be done with the LoadPanelEx function. Let me know how it goes!
As well, I found some example code to get you started.
How to access individual controls within multiple tabs in CVI
http://decibel.ni.com/content/docs/DOC-14187
Regards,
Shawn S. | NIC
Instrument Driver/IVI PSE
National Instruments

Key frames effect controls and Fast color correction

I just learned about keyframes and gradual transistion of effects and i like that a lot.
Putting it in practice using the Fast color correction feature ; I seemed to miss the key navigation bar (I hoped to find it on the right side of the Fast Color corrector title line or ??? in the effects control panel)
I guess I'm looking at the wrong end of the world, or do keyframes not exist for fast color correction, I seem to notice the keyframe navigation for time Remapping and opacity..... where did I lose the keyframe navigation bar for fast color correction ???
Pro CSS3 on windows XP fully patched
hoping very hard I'm just looking at the wrong side of the world
please give me a hint.

You will find links to many
free tutorials in the PremiereProPedia that will quickly show you how things are done in Premiere Pro, including how keyframes work.
Cheers
Eddie
PremiereProPedia (
RSS feed)
- Over 300 frequently answered questions
- Over 250 free tutorials
- Maintained by editors like
you
Forum FAQ

Problem with premiere pro effects controls

Hi, Merry Christmas;
I have a problem using keys with the opacity effect in the effects control panel; the following pictures should I think make my problem clearer to understand:
The image above shows that the opacity control of the correction gopro clip is at 100% which unless I've drunk too much champagne, is in full view on the screen!
I want to make a transition effect showing the raft appearing in the window of the following picture which is an Indian Granary above the Colorado river.
On my clip of the Granary I zoomed up to the window as to give the impression I get into the granary itself; When I arrive at this moment I begin, with key frames to have
the granary interior pass from 100% opacity to 0% at the end of the granary clip. Unless again champagne is very bad for my health and vision, I should see then the river
and the raft! Well I don't and that gives me nightmares! What is wrong? I add that to have a smooth and regular zoom I have used time remapping on the granary clip.
The granary clip is the one just above the correction gopro clip and overlapping it by the duration of the dissolve shown selected in the picture below(I could of course use a dissolve here, but I want to economize on a supplementary effect)
below is the view with the screen and the opacity of the granary clip at 25%. Normally the clip of the raft should be quite visible then! the red-orange on the right of the screen is the interior wall of the granary!
Thanks for any suggestions... Claude

Stacking in Adobe products is prototypically the top being the final thing you "see". If you have two clips, one atop the other, you will normally see the top clip & nothing from the bottom clip ... unless the top-most clip is given some transparency by say bringing its opacity setting down.
Think of it as the bottom layer "feeds" up to the next higher layer and so on. What comes out at the top is what you will see as the final product.
Much of my work has been short interviews cut with b-roll & stills. The basic interview sits on V1, and I use V2 and only occasionally V3 for the b-roll & stills that I'll cut to for variety, information, or simply interest retention during the running of essentially the audio from V1. This works nice, as I can expand or trim the b-stuff as it seems right while playing back. Then if I want to put in a transition, as part of polishing, I can either trim out the V1 section and move the V2 clip "down" before adding transitions or do a razor on V1 on both ends and add it to the end of the clips. Typically I cut out the section.
The lesson is ... putting anything on a higher track replaces the viewable video of anything under it. Unless you reduce the upper tracks opacity.
Neil

BUG: Keyframe Curve Display in Effects Controls Panel Broken

Similar Messages

Maybe you are looking for