Bug? N85-contacts with multiple numbers not indexe...

on my n85, if i have a contact A w/ multiple numbers: mobile:123, work: 456, etc, only one of those numbers will show up when i search for contact A. also, that number is the only one searchable as well, so if '123' showed up when i searched for 'A', and then i searched for '456, my N85 wouldn't return any values..

Hi,
/t5/forums/replypage/board-id/pcsuite/message-id/37967
/discussions/board/message?board.id=pcsuite&message.id=33301#M33301

Similar Messages

  • Contacts with multiple numbers under the same labe...

    i
    I have many contacts which have numbers saved under the same label.
    For example a contact like this:
    First name: A
    Mobile: 11
    Mobile: 22
    Telephone: 33
    Telephone: 44
    When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows:
    A
    Mobile: 11
    Telephone: 44
    Mobile (other): 22
    As you see it deleted one of "Telephone" labeled numbers. It also happened when I used PC suite.
    It is really annoying as if I save/sync the contact using Ovi, it causes loss of contacts data.
    BTW there is no problem using Backup/Restore function of Ovi/PC suite, nor "Copy to memory card" function of the phone itself.
    Ovi suit version : 2.1.1.1
    Nokia E51 v300.34.56
    Windows 7
    PS:
    tested another one with 6 different numbers under the same "Mobile" label
    the result in Ovi is:
    AA
    Mobile: 11
    Mobile (main): 33
    Mobile (other): 22
    the other 3 numbers were lost

    atammin wrote:
    Ah, you have an interesting setup here.
    Could you answer a few clarifying questions regarding this.
    > When I open Ovi Suite / Contacts / Contacts in E51 and open the abovementioned contact "A" it shows
    * Did you perform a sync? Or did you just connect the phone and look at the contact card in the phone view?
    I had performed sync before and realized that some contact data are missing in my phone, so I started investigating to see exactly which contacts are affected by creating some dummy contacts and editing them by clicking on my phones icon below the window of "Contacts" tab in ovi.
    * Did you check the contact in your phone (using the phone's UI)? Were all the details there - or are you saying that Ovi Suite lost some of the details?
    In fact both. Ovi fails to extract and show some numbers and thus fails to write them back to the phone correctly. The lost details are purged from the phone too.
    Just to confirm I've understood the scenario correctly
    1) you have contact card in phone with two mobile numbers  (same label) and two telephone numbers (same label)
    yep
    2) you sync with Ovi suite
    Either Sync or directly open and save contact.
    3) the mobile numbers have been re-labled  to Mobile and Mobile (other) but the numbers are preserved
    They are re-labled only when viewed in Ovi, but  written back to the phone with the same "Mobile" lable as created on the phone.
    4) one of the Telephone numbers is completely lost from Ovi Suite and phone.
    And this scenario happened with this setup:
    - Ovi suite version : 2.1.1.1
    - Nokia E51 v300.34.56
    - Windows 7
    I just want to be clear on the setup and scenario so we can investigate.
    thanks, Aki
    I also done another test
    This is the contact created in phone:
    BEGIN:VCARD
    VERSION:2.1
    N:;A
    TEL;CELL:11
    TEL;CELL:22
    TEL;CELL:33
    TEL;CELL:44
    TEL;CELL:55
    TEL;CELL:66
    TEL;VOICE:11
    TEL;VOICE:22
    TEL;VOICE:33
    TEL;VOICE;HOME:11
    TEL;VOICE;HOME:22
    TEL;VOICE;HOME:33
    TEL;VOICE;WORK:11
    TEL;VOICE;WORK:22
    TEL;VOICE;WORK:33
    X-CLASSrivate
    END:VCARD
    And this is what happens to contact when I just click edit and then save in Ovi.
    BEGIN:VCARD
    VERSION:2.1
    N:;A
    TEL;CELL;PREF:11
    TEL;CELL:33
    TEL;VOICE:33
    TEL;VOICE;HOME:33
    TEL;VOICE;WORK:33
    END:VCARD
    I also attached what ovi shows about this contact as an image.
    Attachments:
    displayed in ovi.PNG ‏9 KB

  • Identifying which number a message is sent to for contacts with multiple numbers

    Hi there,
    Like many, I have a lot of contacts that have 2 or more mobile numbers stored against their name.
    I sent a message to a contact who has 3 numbers. A couple of days later I wanted to check to see to which number I sent the message but I couldn't see any way to display this from the message. The only information given is the contact name of the person I sent the message to, not the number.
    Surely there must be a way to do this by tapping on some part of the message. I tapped the message and got options "Copy/More" and "More" gives me the option to bin or forward. Tapping on Contact, gives me the contact name and phone/FT/info icons and tapping on the "i" icon displays the full contact details with the 3 numbers!
    The only way I got round this to find out which number it was, was to split the contact in to 3 different contacts as in Name 1, Name 2, and Name 3.This then allowed me to see the number because the message list updated depending on the number that was used. So really, the number is definitely there somewhere, but how to get it!
    Any ideas anyone please?
    Thanks,
    Maz

    Hey Maz K,
    Thanks for the question. This can be done by viewing the contact info in Messages. Simply tap “Contact” in the top right corner, then tap the icon. This will bring up the contact card, and the number the message was sent to will be highlighted in blue.
    View someone’s contact info in Messages.
    To quickly view someone's contact info in Messages, tap Contact.
    - Tap to call that person or to use FaceTime
    - Tap to see the person’s complete contact info
    If they're not already a contact, you can tap Create New Contact to add them.
    Messages - Learn more about iOS 7 and iPhone - Apple Support
    http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Messages#TI136
    Thanks,
    Matt M.

  • When looking at recent calls on my iPhone running iOS 7, how can I tell which number called me when a contact has multiple numbers listed?

    I have an iPhone 5s and I am coming from an Android phone. On the Android phone, when looking at recent calls both the contact name and the number is displayed. On my iPhone I only see the contact name, in the case of contacts with multiple numbers attached how do I see which number the call came from?

    Click the "i" in the circle to the right of the contact name.
    The phone number the call came from is listed in blue.

  • Help with multiple contacts with multiple phone numbers

    I'm fairly new to the iPhone so thanks in advance for any help with this issue.
    I have contact list with records for a lot of people (300+), each with several phone numbers each, home, mobile & work, etc, .I can't seem to find a way to have the iPhone announce the name & number or name & type (home,mobile,work) of the caller from the contact list, my old cell phone could do that easily.
    At the moment what I've been doing as a work around for a few (important) people is to create a custom ringtone for that caller & that phone number.  Since it also seems there's no way to attach a different ringtones to each number in a single contact record I've had to create multiple contact records for each person, each with a different name/number combination such as "John Doe Work", "John Doe Home" or John Doe Mobile" then assign to it the custom ringtone I created for that name/number. 
    I need to this so that if I receive a call while I'm driving (or whatever) that I can't answer right then for some reason (often happens),  the ringtone I created for that name & number helpfully lets me know  who & where their calling from.  It's very important to know where someone is calling from, if someone's calling from home then I know I've got some time,  but if their calling from work then I need to get back to them quickly.
    This is a real pain!, having to make multiple contacts & ringtones for a every person with multiple numbers is a extraordinary waste of time.  My old cell phone could do this with no problem but there doesn't seem to be any way to do this with my new iphone.  Am I missing something here?  I am new to the iPhone so if there’s a solution to this that I’ve missed I'd very much appreciate the assistance.
    Thanks in advance.
    Al

    https://discussions.apple.com/message/18271382#18271382

  • How to set default email address for contact with multiple addresses.

    Apologies if this has been asked before, it seems a very basic question but I'm unable to find an answer.
    Can a default address be set in Address Book for a contact with multiple addresses? Or if not, which address does it send to "automatically" when this condition exists? I know you can manually select the address you want to use, but what if the contact is added to a group?
    Thanks
    Denis

    Thanks for the reply, buy I have no idea what this means.
    I have the same question. I have a contact that has five email addresses. When I add the person to a group, Mail automatically selects one of the addresses, but not the one I want. I need to go back and manually select the correct address. Can't I select one of these addresses as the default to be used all the time?
    Apologies for not quite understanding the first reply.

  • Contacts with multiple mobile numbers

    Hello all,
    This is my first post here, so please be patient with me.  I searched through previous threads, but did not find an sufficient answer to the problem I am having.  To set the stage, I will give you what I am working with
    g-mail account with close to 500 contacts
    iPhone 5, latest version 6.1.3
    MacBook Air, latest version 10.8.3
    I have my g-mail account linked to my iPhone as an Exchange connection so that I can view the contacts.  I have my computer contacts program connected with Google as well.  The problem I am having is that most of these 500 contacts have multiple mobile phone numbers.  I am able to create this contact easily in g-mail and can relabel the phone types to match what they are.  Let's say for instance:
    Name:  John Smith
    Home: 111-111-1111
    Mobile:  222-222-2222
    Mobile:333-333-3333
    etc.
    I have done quite a bit of testing and found that the computer contacts matches up perfectly with whatever I put in there, including multiple mobile numbers.  My iPhone on the other hand, does not show the second Mobile number.  It will recognize multiple home, work, and pager numbers, but not multiple mobiles (it only shows the first one on the list).  Why would it allow multiple numbers of the other types and not mobile numbers?
    Is there something I am doing incorrectly, or has Apple overlooked a simple, important function?  The things I do not want to do are:
    create custom phone labels for my contacts as in mobile1, mobile2 - there are too many and this is an inefficient solution.
    change all of the cell numbers to be work numbers - same as above, and what if someone else is updating g-mail contacts and does not follow the rule?
    unlink the Google tie I have on the computer - this seems to be the only one of the two that works, and I do not want to have to constantly remember to download an updated contact list.  The list changes constantly, and I know I would eventually forget ( I am looking for a poka-yoke here).
    Any ideas about solutions?
    Thank you for the help

    I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

  • Contacts with Multiple Backup Assistant + Contacts Entries

    I have read others with these same issues.  Unfortunately, the responses they are getting have to do with having multiple contacts and joining those contacts.  That is not the issue.  The issue is that each contact has MULTIPLE Backup Assistant + Contact entries.  Meaning, when you you start typing a name to send a text message to, it shows you multiple phone numbers for that person (only, they are all the same phone number).  For example, if I start typing Zoe, it will show you contacts that match, it will have Zoe 555-555-5555 listed 6, 7, 8, or more times.  But wait, that is the home number, how you keep scrolling them until you get to the mobile number which is also listed 6, 7, 8 or more times.  When you go into you contacts and select Zoe, and then go to Edit, you see why - There are 6, 7, 8 or more Backup Assistant + Contacts entries!!!  These duplicates are what we are wanting to know how to remove.  My daughter has only one phone number, but when I click on the her picture in the favorite contacts widget, it shows 2 and they are both the same.  Even the BAL #225 shows up EIGHT times!!!!!   When you go online (to the Backup Assistant), they are all listed there too.  HELP!!!!!!!

    I have no prblem syncing multiple mobile numbers so I don't think it's a universal issue with iOS. The only difference I see is I am using CardDav instead of using the Exchange option. Have you tried it that way? You can urn off contacts in the Exchange account and add the CardDav account separately.

  • Outlook contact "other" phone numbers not syncing.

    It seems when I have multiple phone numbers in an Outlook contact other than work, home, mobile, and other; these phone numbers aren't syncing to the iphone.  These are numbers that, in Outlook, you have to click on the field to select and see the other number. 
    For instance, say I have a contact with a work, home, mobile, and other phone number.  In Outlook, I want to add a Home 2 phone number.  So I click next to the home field in Outlook and select "Home 2" and then enter a number.  Now I have both numbers stored in Outlook, Home and Home 2, albiet I have to toggle between the two to see them.
    These are Exchange activesync accounts and I have replicated this with both Exchange 2003 and Exchange 2010.  Outlook 2010 is the other side of the equation. 
    Home 2 doesn't come over to the iPhone. And it not just "Home 2", that was used as an example.  It's essentially, it seems, any numbers that you add beyond the four fields available in the Outlook contact.  I would really be surprised if it wasn't capable of syncing this.  Am I missing something?  Anyone else having the issue or successfully dealing with it?  TIA.

    I saw that post and i had to reply for it.
    A little-great-working solution for that is to run those 3 lines (one line at a time) on powershell and all the "Other" lable contacts will change to "Mobile" label and here you go, like a magic - all contacts phone numbers are now visible on the phone again.
    (Drop the 1. 2. 3. from the lines of course)
    Hope i helped someone
    1.     $outlook = new-object -com outlook.application
    2.     $contacts = $outlook.Session.GetDefaultFolder(10)
    3.     $contacts.Items | % { if($_.MobileTelephoneNumber -eq "") { $_.MobileTelephoneNumber = $_.OtherTelephoneNumber; $_.OtherTelephoneNumber = ""; $_.save() } }

  • Synching contacts with Outlook does not work

    I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
    Any ideas? Thanks!

    So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone.  They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
    As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook.  I'm assuming your Outlook syncs with an Exchange Server.
    You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook.  You could then import that set of contacts into the Exchange version of Outlook.

  • Want to type in my phone contacts with my computer (NOT tiny buttons on phone)

    OK so I do not use Outlook or Yahoo or any of the like type services and even if I did, it would just be email addresses and not phone numbers.  I need to input all my phone contacts (about 200) into my 8330.  I cannot fathom how long it is going to take using those tiny buttons on the phone itself (seeing as how my big fingers hit like 2 or 3 buttons every time I try to hit a letter while texting and I have to constantly delete and it takes forever).  I dont care about adding email contacts into the phone.  I want some way to type in phone numbers on the computer then sync that info into the phone's contact list.  I have tried to find such a function on the desktop software, but I don't think it has anything like that.  Should I just bite the bullet and start typing in contacts with the tiny buttons on the phone?  WOW, what a pain, you'd think RIM woulda made this easier.
    -Jeremy
    P.S.  If I did go through the trouble of trying to set up some kind of Yahoo or Outlook (which aparently I'd have to pay extra for, sheesh!) account, woudl that just do email contacts or phone numbers too?  (trying to figure out why on earth I'd type my friends' phone numbers into my email list?).  Secondly, if I did that, would that foold my inbox with text notifications?...  or my phone with email notifications?  I don't want email notifications on my phone, just phone calls, texts, pix, etc.

    Welcome to the forums
    You have a few options available to you to make this easier. Depending on your desktop manager version and your computer's OS, you can import/sync contacts with the applications in this kb article: http://www.blackberry.com/btsc/KB14730
    Google sync can also do the same, but it is not included in the list. You need a google account and have to download the google sync app.
    Hope that helps.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Looking for BPC user contacts with large numbers of dimension members

    I would like to make contact with other BPC users that have multiple dimensions with dimension members in excess of 10K.
    Thanks,
    Cary Schulz
    Newfield Exploration
    281-674-2004

    Hi Helene,
    With 3,000 members you should not be experiencing these problems, if your report is designed properly.
    I'm running BPC 5.1 SP8 on SQL 2005, with a dimension containing 22,000 members. Client PC's are typical (XP, Excel 2007, 1 or 2 gig RAM).
    Using EVDRE and this dimension expanding on the rows, most reports & input schedules can expand & refresh in the range of 10 to 30 seconds.
    The faster times are when I use a row expansion memberset using dimension properties, such as Active="X". The slower times are when the memberset is hierarchy-based, such as BAS.
    If you're using a dynamic template (one using EVEXP for the expansion) then you should start over using EVDRE. It will be much faster, particularly if you optimize your row expansion.
    It's often a good idea to add dimension properties specifically for the purpose of optimizing the report expansion, if the dimension has thousands of members. I sometimes go as far as to add properties which mimic the hierarchy (MyLevel2, MyLevel3, etc) just for this purpose.

  • Quicktime .mov containers with multiple tracks not working on iPhone

    Hello,
    I have several .mov files (containers) that all include H.264 mp4 video tracks and AAC sound tracks.
    Some of the .mov files only include one video track and one sound track, but some contain multiple, as I have joined a few clips together into one container. Each .mov file was saved as a Standalone file, so no reference files are needed.
    All of them play perfectly in Quicktime and iTunes and all sync with both AppleTV and my iPhone. They also play perfectly in AppleTV, but my iPhone only plays files with a single video and audio track. If the .mov container includes more than one video track, the iPhone will play the first track and then freeze when it should transition to the next track. (Is this a known iPhone bug?)
    My question is: Is there a way to merge video tracks and sound tracks within a .mov container without having to re-encode/export the file to an iPhone format?
    The reason I do not want to export everything to an iPhone format is because I already tried that, and the total size of all the exported .m4v files is around 10 GB but the size of the .mov files is only 5.6 GB, yet I do not see any difference in quality. And my iPhone is only 8 GB, so I can't sync all of the files if I use the iPhone format.
    I've also tried several different settings with iSquint, but the smallest I can get the files down to is 7.4 GB without compromising the quality, and that leaves very little space left on the iPhone.
    Note: The iPhone is a 2G phone with the latest firmware.

    I'm having the exact same issue with my iphone 4s.. I have a belkin wireless router with multiple other devices connecting effortlessly every time. I have my old iphone 3G, and ipod touch, and 2 laptops connecting with no issues. I am receiving the same error message as you. Lame.. If this doesn't resolve itself soon, I am returning the iphone 4s.
    TJ

  • Syncing iphone contacts with iCloud does not work

    I navigate to my iPhone 4 Settings and from there chose the option which is named iCloud
    I turn OFF Contacts choosing to keep contacts on my iPhone and then turn it ON again.
    I get prompted with the option to Merge my iPhone contacts with the ones I have on the iCloud already. I  click "Merge".
    I wait until the iCloud service is turned on for my iPhone contacts.
    Finally, I go back to the Contacts app on my iPhone and click Groups, which is there I assume because I have multiple email accounts linked to my iPhone. I refresh my contact list by clicking on the circular arrow in the top left corner of the screen on the iPhone.
    Contacts I have recently added to my iPhone are NOT transferred to iCloud.
    Why is this not working?
    <Personal Information Edited by Host>

    Go on system preferences / iCloud and check if Calendar is turned on.
    Then take your iPhone 4 and go on Settings/iCloud and check if the Calendar is turned on.
    If both are on with the same Apple ID, it should all go fine.
    You can go on iCloud.com, logon with your Apple ID and click on the calendar to verify.

  • Using my ipod with multiple computers: not the usual problem I think

    I've searched the forum and various help documents but I couldn't find the answer to this.
    I have a laptop at the office (work-related, so I don't have any of my music on it, just itunes) and my computer at home. Ideally I'd like to:
    = keep my ipod automatically synced to my home computer
    = be able to connect my ipod to my work laptop and play the music stored on it through itunes there, and also keep it charged and ready for the trip home.
    It seems that the 'manually manage music and videos' setting travels with the ipod, rather than being stored on the computer's itunes installation. If I set it at work, so I can play music there, when I connect the ipod at home I have to reset it (and a few times when I did so the ipod started deleting everything because 'sync my music' was not checked, grrr).
    I just want to set things up in a way so that when I connect my ipod at work it will let me play whatever songs I have there (without wanting to sync anything), and when I connect it at home it will automatically update it. It's simple enough, but I can't seem to figure out how to do it.
    If I connect the ipod at work and press 'cancel' when the 'do you want to erase things' pops up, it doesn't try to change the settings, but at the same time it doesn't let me play music at all, everything is greyed out
    does anybody have any idea? I don't want to resort to have to buy a usb power adapter just so that I can play my ipod at work without draining the battery...

    B_Ram wrote:
    Could it be because its an iPhone and not a true iPod???
    i doubt it.
    actually, syncing an iPod Touch (or iPhone) with multiple computers is not recommended @ all. click here to find out what Apple has to say about it.
    all i can think of, i you really must do that, is this:
    to prevent a sync when plugging in the iPod - hold down the option and the command ( on a PC that would be the shift and ctrl ) keys when plugging in the ipod - keep pressing the keys until the iPod is listed under the devices list in iTunes. now you should be able to do what you want.
    however, you do so @ your own peril, as the article above outlined.
    alternatively, consider a setup such as this.
    good luck !
    JGG

Maybe you are looking for