Bug or User Error - Virtual Copy

All,
I'm still on 1.3.1 (still too much dust flying on 1.4.1), Mac OS X 10.4. The situation is as follows: Took a standard RAW image file from Canon 40D.
1. Made a virtual copy of the original, crop aspect set to 8x10, made adjustments, etc. including some spot removal, etc.
2. Made a virtual copy of the virtual copy, converted to Grayscale, "assumed" the crop value and spot removals came with it. Instead, the second virtual copy is showing up with a crop value of 4x5 and the spots removed in the first virtual copy, return.
It is very repeatable, and not associated with a specific image file. I haven't tried it on Windows XP yet.
Jay S.

Hal,
I've been doing a little more with this. In Develop module, if I make a Virtual Copy of an image where I've used a Metadata preset to add some data to the image, that metadata preset is refected in the virtual copy as well, if I do the same exact thing with the same exact image in Library mode, the metadata is set to None, as opposed to the Preset I used with the original.
I know this is different from what I originally stated but seems odd. Also I'm not sure why you don't consider it a bug, small as it may be. I set the original to 8x10, if I wanted the lower ratio of 4x5, I would have set it to that. If 8x10 didn't matter to Adobe then why have it as an option. In my mind the Virtual Copy should reflect the same choice made on the original.
Jay S.

Similar Messages

ARC mandatory property lost (bug or user error?)

I have a few entities with an ARC relation. In the logincal model one can't set this to mandatory or optional. (as far as I know).
This leads to a annoying issue:
The property can be set in the relation model by clicking on the arc. So far so good.
When I make changes in the logical model and engineer to relational model the mandatory property switches back to optional.
What am I doing wrong?
BTW hope someone reads this
As a feature request it would improve users productivity if one could click the header of the name column in the Property Propagation dialog.
That would make selection much more efficient.

Thank you Philip
Just to verify if I was clear and your answer solves the case .
I try to achieve to make this arc mandatory:
Now the only way to achive this is to click and set property on arc below.
Then one of the two optional cols must be set:
That setting is lost when I engineer from logical to relational again.
Thanks for logging the ER and Bug!

Timestamp of videos not consistent with photos - appear out of order - bug or user error?

We just returned from Hawaii and, of course, we have a mix of photos and videos. However, subsequent photos and videos taken about the same time, which should have timestamps minutes apart, have timestamps that differ by 4 hours. As I dig into this deeper, it seems all the videos have timestamps 4 hours from what they should be(my view). At a minimum, I believe the photo and video timestamp should be set per a consistent definition.
I am determining this after I imported the pictures into iPhoto. I have done the import several times and the results are consisent.
Example:
IMG_0233.JPG - April 6, 2013 6:14:46 PM
IMG_0234.MOV - April 6, 2013 11:15:08 PM <----This should be 6:15:46 PM
Tried to verify the timestamp of the video and photo while the picture is on the iPhone…had to buy iPhoto for IOS for $5. The photo timestamp is the same as stated in iPhoto(IOW, IMG_0233.JPG is 6:14), but the video timestamp is just April 6, 2013…no exact time. Guess I wasted $5.
Computer Data:Mac Mini 2.3Ghz Intel Core i5 - 8GB Memory - OS X 10.8.3
Iphoto 11 9.4.3
Phone Data:
iPhone 5
iOS 6.1.3
Date & Time preference: 'Set Automatically'=ON
Travel Timezone where pics taken: Hawaii - GMT-10
Home Timezone: Chicago - normally GMT-6(4 hour difference from Hawaii), but right now Chicago is GMT-5 due to daylight savings.
My theory is that there is a bug that sets the video timestamp to the 'home timezone', potentially only when 'automatic timezone is set.
This seems easily fixed by doing a batch change to adjust the timestamp on all videos
Any other explanations? I am hoping I am doing something wrong.

2 things...
1) my opening paragraph says 4 hours, but it should be 5. DOH
2) i just imported a bunch of pictures and videos from an android phone. Same issues. The Android photos seem to be perfectly aligned with the photos from the iphone 5, but the videos are 5 hours off the mark(later). Of course, I want to view the pictures with the time in Hawaii, not Central Time, so the videos are definitely in the wrong from an intuitive standpoint...as I see it.
2013-04-09 11.14.25.jpg - Taken at 11:14am in Hawaii. This data is per the file as it sits in dropbox and viewed by my mac mini Finder. Android puts the file on drop box from the phone, and I imported to iphoto from dropbox. Despite the filename indicating 11:14am, finder says the file was created at 4:14pm. However, iPhoto, correctly puts a timestamp of 11:14am and picture is where I expect it from a time standpoint at 11:14am.
2013-04-09 11.15.05.mp4 - Taken at 11:15am in Hawaii. This was imported into iPhoto via dropbox at the same time, but it is showing up in iPhoto at 4:15pm, throwing off the sorting.
So, now I believe I have an iPhoto issue and probably brought this question to the wrong forum?
I have fixed the problem by doing a 'adjust time and date' to all videos, both from iphone and android, to be 5 hours earlier in time. Now everything lines up, but I am scratching my head why this isn't done consisently between photo and video in iPhoto, and why I have not run into this before.....

Live Cycle Form problems - bug or user error?

At work my assistant and I have created an interactive form from an Excel spreadsheet and then proceeded to add drop down boxes in numerous locations on the form. However, when we try to create a pdf in live cycle (8), the drop down boxes pre-populates with the first alpha-numeric character option in the drop down list, instead of a blank space, which is the default state. In addition, the tabbing between the drop down boxes becomes random and I am unable to change them. The form is six pages long, with about twenty to thirty drop down boxes on each page (I think - I don't have the form with me now - on my work computer). Either way - it is a pretty big form. The weird part is that when I split the form in smaller sections (i.e. one page at a time, the problems described above does not happen. I also have numerous other (shorter) forms that work just fine. Is there some sort of size or complexity limitation that is causing this, or is there another way to get around this? The only thing I could do so far to get it to work is to remove the drop down boxes and just make them text entry fields. Any advice would be appreciated.

1. How are you converting from XLSX to PDF. Are you printing the file ato PDF then adding the fields after the fact?
2. I was able to change the tabbing order using the tabbing tool (under the View menu). Moving the fields in the hoierarchy will not affect the tabbing order in this case. By default it is left to right - top to bottom. So if you move the fields on the page then it will affect tabbing order. You really shodul be doing this via the tabbing tool.
3. On teh version that you sent it was showing a blank entry for all DDLists until you selected an item.
Note that I am using version 9 of Acrobat/Reader and version 8.2.1. of Designer.
Paul

Lines disappearing on Master Slide (Bug or User error?)

Hi all -
I'm using the "Magic Move" feature on one of the Master slides from a theme called "Blueprint". When I use Magic Move some of the "permanent" lines from the master slide disappear during the move and then reappear when the move is finished. Any suggestions for solving this problems would be greatly appreciated.

Thanks Ken -
I moved my presentation to several other themes, but the problem seems to extend to those Master Slides as well. All of my elements (photos, text, etc.) come through the transitions just fine, but some of the lines on the Master Slide itself disappear while the transition takes place. It makes the whole thing pointless it the viewer can see this, and there's no way to change the master or stop this from happening. Hopefully Apple will take a look.

Permission Error when copy files into cmsdk using NFS with non admin user

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Hi All,
We are using CMSDK with NFS protocol and we have created different users with ACL to control different access for users.
When we copy files into cmsdk folders using one of the admin user this works fine, even a multiple copy works fine. But when we use any non admin user , some time copy commands works but some time it throw a permission deny error. and this is happening very intermittently.
when we use ftp protocol and ftp file it's all works fine for the both admin & non admin user. Is there any limitation in using CMSDK NFS protocol
Did any one encouter any similar issue. Any pointers would be of great help.
Thanks in advance
Regards,
Navin

Mail does not create new emails based on the highlighted mailbox, but rather the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part?

Mail does not create new emails based on the highlighted mailbox, but rather according the receiving mailbox of whatever individual email happens to be highlighted. This was not the case prior to Lion. Is this a bug or an error on my part? (I do have the setting for creating new emails from the highlighted mailbox checked.)

The questions about time was not only because of thinking about the Time Machine, but also possible impact on recognizing which messages remaining on a POP server (doesn't apply to IMAP) have been already downloaded. In the Mail folder, at its root level, in Mail 3.x there is a file named MessageUidsAlreadyDownloaded3 that should prevent duplicate downloading -- some servers may not communicate the best with respect to that, and the universal index must certainly be involved in updating that index file. If it corrupts, it can inhibit proper downloading. However, setting the account up in a New User Account and having the same problem does not point that way, unless your POP3 server is very different from most.
That universal index is also typically involved when messages are meant to be moved from the Inbox to another mailbox -- in Mail 3.x the message does not move, but rather is copied, and then erased from the origin mailbox. That requires updating the Envelope Index to keep track of where the message is, and should keep track of where it is supposed to have been removed after the "Move".
Ernie

No virtual copy, no stack, and no edit. Whats left?

purchased lightroom 2.0, clean install everthing going well until I came to edit raw photos in photoshop! The raw opens in photoshop, I can make my corrections, but when I close the file and return to lightroom, lightroom will accept the new psd file. It states that it cannont read the file and that it is in a incompatible format??? go figure! using photoshop cs3. If I try to use the virtual copy function, I get an internal error in a null timestamp. Using xp pro 32 bit. photoshop all current along with xp pro.
On an newer system I have with all the same programs however, depending on which drive the images and catalog are on it will bring the image back in from photoshop after edit (only if catalog and image are on c drive) but will not stack! States that the files are located in 2 different folders, but the sit next to each other in the same folder????
However on an older laptop, I don't have any of these issues. it all works fine, return import from photoshop, virtual copy, and stack, except that the laptop is to slow to actually use for production
Following threads, this seams to be a common bug, but thought my experience may help others experiencing similar issues

For about 2 weeks I had this problem and today I fixed it!
Didn't fancy doing a Reset of Firefox as I'd only just done one a few months ago, manually.
Basically, I uninstalled ZoneAlarm. I've been a ZoneAlarm fan for years but the software just got worse and worse and for about a year this weird thing pops up while I'm in Firefox by pressing CTRL Enter or something, it's like ZoneAlarm has put some kind of layer between me and the browser.
Anyway, uninstalled it, it rebooted and did a scandisk which did find and fix a few errors too, so could also be that.
But I'm happy without ZA now as I've found a better one called Online Armour... non of that sneaky trying to install toolbars in your browser rubbish of ZA.
Hope this helps!
I can't tell you how good it feels to have copy & paste fully working again!

Error while copying page. (WWC-44262)

Error while copying page. (WWC-44262)
An unexpected error occurred: User-Defined Exception (WWC-44088)
An unexpected error occurred: User-Defined Exception (WWC-44082)
An unexpected error occurred: User-Defined Exception (WWC-44082)
Error while copying page. (WWC-44262)
Please specify a valid Name and Display Name. (WWC-44102)
I am not able to make a copy of a page.

Hi,
Did you get an answer for this problem?
Karl

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in Itunes?? Prob user error but wanted to get some help.

I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.

What's the origin of this external drive? It sounds very much like it's a Windows-formatted (NTFS) drive which Macs can't write to. If you can, copy the files off the drive, reformat it as Mac format (using Disk Utility) and copy the files back. If you need to continue writing to it from a Windows PC, you should format it ExFAT in Disk Utility.
Matt

Error while copying page template!

Copying of a simple page template fails in Portal 10.1.2 with the following error:
Internal error (WWC-00006)
Error while copying page. (WWC-44262)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44088)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error occurred: ORA-20100:
ORA-06512: at "PORTAL.WWSBR_STDERR", line 437
ORA-06512: at "PORTAL.WWV_THINGDB", line 1816
ORA-06510: PL/SQL: unhandled user-defined exception
ORA-06512: at "PORTAL.WWSBR_API_URL", line 73
ORA-01403: no data found (WWC-44082)
An unexpected error has occurred (WWS-32100)
ORA-1: User-Defined Exception (WWC-36000)
No data found (WWS-32101)
I already had this error in Portal 9.0.4.

Hi Christian!
I already opened a TAR. As (according to the Portal docs) exporting Portal applications to future versions is not supported, waiting for another Portal release would mean starting our applications from the scratch. For this reason, bugfixes in future releases are of no really use in our case, and we definitely HAVE to find a solution for this quite crucial problem.
But thanks for this information.
Eckhard

Error while copy query between infocubes

I was trying to copy a query between infocubes and ended with error message.
Query copied from Infocube A to Infocube B. Infocube B has an additional dimension with 2 char's when compared to infocube A.
Using transaction RSZC, I tried to copy the query, but ended up with following error..
1.Program error in class COPY_QRY_TO_CUBE method : UNCAUGHT_EXCEPTION
2.An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3.The system tried to insert a data record, even though a data record with the same primary key already exists
I also tried using function module RSZ_I_COPY_QRY_TO_CUBE, which was of no help. I get the following message with the function module...
1. Program error in class RS_TESTFRAME_CALL method : UNCAUGHT_EXCEPTION
2. An exception with the type CX_SY_OPEN_SQL_DB occurred, but was neither handled locally, nor declared in a RAISING clause
3. The system tried to insert a data record, even though a data record with the same primary key already exists
I have also tried a solution in BW expert by using debugging mode of the above function module, again this was of no help..
I am BI 7.0 SP09...
Any ideas, Please....
Thanks,
RR
Message was edited by:
Ray R

Hello,
Are you trying to copy Business Content delivered Queries?
I had also got this error when copying over all queries from one cube to another. Reason for this message was plain simple - I did not realise that the sender Cube had Business Content Query which we cannot copy over using RSZC as system tries to create another query with suffix as 0****_1. We cannot create query in SAP user namespace. Error message is different then the reason behind it.
Thanks
Ravi

Oracle R Enterprise installation ERROR: cannot copy dll file

This is bit strange, I posted this message in 2 forums but surprisingly can't find it anymore!! Anyways, I would appreciate if anyone can help me a bit on this issue:
I am having trouble installing ORE 1.3 on my windows 7 (home premium, personal notebook) 64 bit. I strictly followed the installation note and made sure all the path variables are defined properly. My R version is 2.15.1. My Windows user is a member of ora_dba group as can be seen below.
C:\Users\sourabh>net localgroup ora_dba
Alias name        ora_dba
Comment         Oracle DBA Group
Members
NT AUTHORITY\SYSTEM
sourabh
The command completed successfully.Now when I try to install.bat (bare with me as I try to include the whole path as I believe there may be the problem. Note that my oracle and R installation is in H:\ drive, not in C:\. Can that be an issue about some windows permission? I off-course tried many ways, gave the user full permission, but no luck.)
C:Users\sourabh>H:\ORACLE\OracleREnterprise\ORE\ore-server-win-x86_64-1.3\server\install.bat
Oracle R Enterprise 1.3 Server Installation.
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Checking R ...................................
Pass
Checking R libraries ........................
Pass
Checking ORACLE_HOME ...............
Pass
Checking ORACLE_SID ..................
Pass
Checking sqlplus ...........................
Pass
Checking ORE ..............................
Pass
Current configuration
R_HOME            = H:\ORACLE\OracleREnterprise\R\R-2.15.1
R_LIBS_USER     = H:\ORACLE\Oracle11g\product\11.2.0\dbhome\R\library
ORACLE_HOME = H:\ORACLE\Oracle11g\product\11.2.0\dbhome
ORACLE_SID      = SINHA
Do you wish to install ORE? [yes]
Choosomg RQSIS tablespace
PERMANENT tablespace to use for RQSYS [SYSAUX]:
Using default SYSAUX
TEMPORARY tablespace to use for RQSYS [TEMP]:
Using default TEMP
Tablespace summary
PERMANENT tablespace = SYSAUX
TEMPORARY tablespace = TEMP
Installing libraries ..............
Fail
ERROR: cannot copy "rqe.dll" to "H:\ORACLE\Oracle11g\product\11.2.0\dbhome\bin"
C:Users\sourabh>Now here is the default group/user and permissions structures for C:\ and H:\ installation directories on my computer:
C:\program files :
        Group or user names                                    Permissions
        CREATOR OWNER                                          Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control
        Users (Win7\Users)                                     Read & execute, List folder contents, Read
        TrustedInstaller                                       List folder contents, Special Permissions
H:\%ORACLE_HOME% :
        Group or user names                                    Permissions
        Authenticated Users                                    Special Permissions
        SYSTEM                                                 FULL control
        Administrators (Win7\administrators)                   FULL control                Now noticed that there is no user called sourabh (Win7\Users) or Users (Win7\Users) on H:\, so I created and gave them "Full control" permission before running install script, but still no luck.... Any help please?
Thanks,
Sourabh

Hi all,
I have finally solved the problem, it seems somehow on my windows home premium I can't run the install script (on H:\ ) from the command line. I manually ran the batch script by double clicking on it, it ran fine and I was finally able to install ORE (server + supported + client) on my laptop. Now the connection -- followed through the manual, created user and granted all the roles. Now that I want to test the connection, I open R console and below are the input and output error message though it seems I can connect to the database:
R>
R> library(ORE)
Loading required package: OREbase
Attaching package: ‘OREbase’
The following object(s) are masked from ‘package:base’:
    cbind, data.frame, eval, interaction, order, paste, pmax, pmin, rbind, table
Loading required package: OREstats
Loading required package: MASS
Loading required package: OREgraphics
Loading required package: OREeda
Loading required package: OREdm
Loading required package: lattice
Loading required package: OREpredict
Loading required package: ORExml
R>
R>
R>
R> ore.connect(user = 'scott', sid = 'sinha', host = 'win7', password = 'tiger', port = 1521, all = T)
Error in .oci.GetQuery(conn, statement, data = data, prefetch = prefetch, :
ORA-06520: PL/SQL: Error loading external library
ORA-06522: Unable to load DLL
ORA-06512: at "RQSYS.RQEVALIMPL", line 17
ORA-06512: at "RQSYS.RQEVALIMPL", line 14
ORA-06512: at line 4
R>
R>
R> ore.is.connected()
[1] TRUE
R> I get the exact same error when I try to use even the ORE user "rquser". Any suggestion how to resolve this error?
Thanks,
Sourabh

How can you create a virtual copy in a Lightroom plugin?

I looked over the Lightroom SDK and did not see any documentation on creating a virtual copy. Is there an undocumented API for this?
If not, is there a plan to add this into the SDK?

Hi Matt,
Yeah, I have some good news and some bad news:
- Good news: Keyboard stuffing (as implemented in the elare framework) works equally well on both platforms, provided the appropriate keystroke exists on both platforms.
(Mac version uses applescript, Windows uses autohotkey - both assure Lightroom is the target) - Note: @2011-07-30, I haven't actually tested this particular function on Mac - but I've tested other similar functions on both platforms.
- Bad news: It doesn't always work on either platform, since keystrokes may be usurped by open dialog boxes and open text fields in Lightroom...
- Good news: failure is 100% detectable.
Bottom line:
If the kludgy nature of this solution would be more bad than good for you and/or your users, then this is not a viable solution.
If your users would prefer the caveats in order to be able to get the job, then this solution will work well enough for now.
PS - I'm presently using it in ChangeManager and its a godsend for me. Since I understand the limitations, my failure rate is appx. 0%.
~R

FM 10 - Serious Internal Error When Copying/Pasting

We regularly encounter a serious internal error when copying text from one FM doc to another. We also get the error (occasionally) when we run FrameScript. Does anyone know what could cause this? It appears to happen randomly (i.e. it doesn't appear to be tied to one particular .book or .fm file). We use FM 10, Windows 7, 64-bit OS, and have 4GB of RAM installed. Help please!

We have version 10.0.2.419. There is nothing out of the ordinary with the content except that it is typically in track text edits. We cannot reproduce the crash on demand. It seems to happen randomly and to some users more than others.

Bug or User Error - Virtual Copy

Similar Messages

Maybe you are looking for