Bug panneau de test carte PCI-6221 sous max 5.5

Bonjour,
J'utilise Labview 2012, MAX 5.5 et une carte PCI-6221.
La carte passe l'autotest sans pb mais rien ne se passe quand je demande d'ouvrir les panneaux de tests, aucune fenetre ne s'ouvre (avec normalement les onglets entree analogique, sortie analogique, E/S numériques, E/S compteur...)
Avez vous une idée pour résoudre ce BUG?
Merci d'avance pour votre aide

Bonjour stef31,
Merci d'avoir posté sur le forum de National Instruments.
Permettez moi de vous posez quelques questions afin que nous puissions mieux comprendre votre problème et que nous puissions reproduire une machine semblable.
Quelle distributions utilisez vous?
Le driver s'est-il installé correctement après avoir introduit votre carte et redémarrer votre machine (Pop up)?
Votre soft Max freeze t'il quand vous appuyer sur panneaux de tests?
Que se produit il si vous cliquer sur "Auto-étalonner" puis sur "panneaux de tests"?
Quelques axes de solutions:
- Ouvrez votre Moniteur de Ressource Windows pour éventuellement voir si votre ordinateur travaille au moins lorsque vous essayez d'afficher le panneaux de test (si non, tentez de réinstaller max).
- Si le problème persiste, auriez vous éventuellement une autre carte PCI sous la main pour voir si le problème vient de la carte elle même ou de votre machine.
- Vous pouvez essayer d'enlever votre PCI-6221, de la supprimer de votre arborescence de Max et de retenter le processus.
- Essayer de réinstaller Max
- Ouvrez LV et utiliser les VI DAQmx pour voir si vos E/S sont visibles (cf ci joint).
Cordialement
P Denis
National Instruments.
Pierre_D
National Instruments France
#adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
LabVIEW Tour
Journées Techniques dans 10 villes en France, du 4 au 20 novembre 2014
Pièces jointes :
Test PCI6221.png ‏14 KB

Similar Messages

  • How to fix error -50010 in MAX 4.0 self-test of PCI-6221-37?

    Hello Tom or anyone who could help
    This is a continuation of my previously posted problems getting my PCI-6221-37
    card to work.
    I reformatted the hard disk and reinstalled Windows XP Pro on the computer.  Then
    I re-installed NIDAQ 8.0 with LabVIEW 7.0, 7.1, and 8.0 support.  Now MAX
    opens in a reasonable period of time and recognizes the PCI-6221-37 card.  When I
    run the self-test option, it replies with an error -50010.  "The specified offset is out of
    range for read operations.  The operation could not be completed as specified"
    Any ideas?
    Halden

    Hi Halden-
    Let's continue our discussion here.  I am in contact with our software engineers to help diagnose this problem.  If you could provide a screenshot of the error in the other thread, it would be a huge help.  Thanks a lot-
    Tom W
    National Instruments

  • PCI-6023E sous Qnx

    Comment interfacer une carte PCI (6023E) sous QnX et plus précisément lancer l'acquisition de la carte ?

    Greetings,
    The links below will help you to start the communication with your card. The NI Measurement Hardware Driver Development Kit (DDK) provides development tools and a register-level programming interface for the development of custom driver software. You will find a lot more information in the links.
    http://digital.ni.com/public.nsf/websearch/E225B21F9710648C86256E4100350F16?OpenDocument
    http://digital.ni.com/express.nsf/bycode/exyv4w?opendocument〈=en&node=seminar_US
    Attached is a zip file of daq examples donated by a QNX customer. No one at NI has tested these examples and we make no claim regarding their quality. Hopefully they will help you setting up your communication.
    Regards,
    Wouter
    NI
    Attachments:
    Codes for QNX.zip ‏75 KB

  • PCI-6221 fails self-test in MAX but device manager says it's working

    Hi everyone,
    I bought a few PCI-6221 (37-pin) data acquisition cards and have been able to get one to work but 3 others don't work.
    Device Manager sees them and says they work.  MAX sees them and when I run Self Test, they fail with error number
    -50002.  Motherboards in non-working systems are PC Chips M957G and P25G.  OS is Windows XP Pro with SP2.
    I already tried uninstalling SW and the board, reinstalling SW and the
    board...autodetect etc works fine.  I even reformatted
    the HD on one of the computers and reinstalled the OS.  Anyone have any ideas?  Thanks in advance.  Halden
    [email protected]

    Thanks Tom for your suggestion to try NI-DAQ 8.0.  I just saw it today.  Yesterday,
    I was able to isolate 3 PCI-6221-37 boards as defective because they all wouldn't work in another computer while
    one other identical model card did work in that same computer.  I called to arrange to return them to NI and learned
    that for these 3, I needed NI-DAQ 8.0.  The fourth one was okay
    with NI-DAQ 7.5.  Apparently, this was a known problem. 
    I wish NI would have simply notified me that my boards would
    not work with the software sent with them and sent the NIDAQ 8.0 CD as soon as they knew rather than have me
    waste a day of my engineering time trying to figure it all out.  Booo NI.
    One of the boards has worked for almost a day under NIDAQ 8.0.  I was able to make some progress on the
    system I am building.  But then it stopped working.  LabVIEW
    (version 7.0 executable) programs would not open completely
    or would open slowly.  One that accessed the COM port only (no
    data acquisition) did work.  MAX opened very slowly or not at all
    and when I click on
    Devices and Interfaces, the hourglass is up for a long time and finally the + icon goes away indicating that MAX is not
    aware of any devices being present.  The Windows Device Manager says the board is present and working.  Windows
    Task Manager lists LabVIEW Runtime and MAX when only MAX is open and indicates that MAX is Not Responding.
    I shut down the computer, removed the PCI-6221 board, booted it up again, and MAX is the same way.  I uninstalled
    MAX and NI-DAQ LabVIEW 7.0 support and then reinstalled them.
    Now the MAX loading window is up for more than a minute and NIMAX.exe is listed in Task Manager's processes.  After
    the first minute, LabVIEW Runtime appears in the Task Manager's
    Applications list.  After a while longer, the MAX window finally
    opens
    and MAX is listed in the Applications.  I click on the + icon by Devices and Interfaces in MAX and the hourglass appears
    and Windows Task Manager says MAX is Not Responding.  Eventually, the + icon and the hourglass go away and
    the Task Manager lists LabVIEW Runtime and MAX as Running.
    I shut the computer off for several minutes, started it up again, and MAX is still takes a long, long time to open. 
    I haven't put the PCI-6221 card back in because MAX still isn't working.
    What do you suggest I do next?
    Thanks
    Halden

  • Probleme avec la carte PCI 6O14 et Nidaqmx base 1.4 sous Linux

    Je n'arrive pas a faire tourner la carte PCI 6014 avec le driver Nidaqmx base 1.4 sous Linux (Suse 9.0). lsdaq reconnait la carte mais le programme d'exemple acquire1point renvoi une erreur de timeout. Le driver prend-il bien en charge cette carte ?

    Bonjour,
    Le driver NI-DAQmx Base supporte la PCI-6014 sur Linux.
    Je vous joins un tutorial qui explique comment utiliser DAQmx Base sous linux... Vous pouvez configurer vos voies dynamiquement ou statiquement.
    Assurez-vous bien que l'exemple que vous utilisez demande une voie physique ou une tâche.
    http://zone.ni.com/devzone/conceptd.nsf/webmain/42​B73A7B82F0FEC786256FB1007227EC#6
    Essayez d'autres exemples. Si le problème persiste quelque soit l'exemple, si vous ne parvenez pas à utiliser l'utilitaire "mxbaseconfig", repostez un thread.
    Bon courage,
    David D.
    Ingénieur d'Application
    NI France

  • Continuity testing with a PCI 6221

    Hello, I was wondering if anyone has some advice about how to setup a continuity test using an M Series PCI 6221 DAQ and Labview 7.1. Specifically, I want to preform a testing regime similar to the IPC-SM-785 guidelines during thermo-cycling of the test vehicles. For those not familar with the guidelines, the purpose is to monitor the resistance of channels that have a DC (10V max.) current (2mA max.) running through them. If the resistance exceeds a certain threshold it is considered "an event", and if ten events happen in a specific time-frame the channel is considered to be "failed".
    I am a relative new-commer to NI DAQs and the associated software, so any advice would be greatly appreciated.

    One way of doing it is to use two analog input channels on your card. Use one to monitor the voltage the other to monitor the current. To monitor the current you will need to add a shunt resistor in series. Use Ohm's law to convert the voltage to the current. Monitor the signals and if you are at 2 ma and not at 10V you are in an error condtion. Tjis is assuming the power supply is a constant current, constant voltage source.
    Greg Bush CLAD

  • Acquisition video avec une carte NI PCI 6221

    Bonjour,
    je ne m'y connait tres peu en electronique et programmation.
    sachant que je suis equipé d'une carte NI 6221, je voulai savoir si il etait possible d'utiliser une de ses entrées analogique pour recuperer le signale d'une camera video type webcam ou petite cdd et d'afficher l'image grace a labview.
    Si oui, pouvez vous me guider vers l'information. Si non , pourquoi?
    Merci

    Bonjour,
    Voici les differentes cartes d'acqusition video.
    http://www.ni.com/vision/framegrabber/f/
    Cordialement
    Samuel G. | Application Engineer Team Leader
    Certified LabVIEW Developer
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Été de LabVIEW 2014
    12 présentations en ligne, du 30 juin au 18 juillet

  • Erreur -10401 sur carte PCIe 6321

    Bonjour,
    j'ai l'erreur -10401 qui me revient lorsque je souhaite configurer un port en entrée de la carte PCIe 6321 ( 3 ports de 8 bits chacun ).
    J'utilise le sous-vi "DIO-configurer un port".
    J'ai vérifié tous les paramètres.
    J'ai également testé le sous-vi"Lire une ligne numerique" et j'obtient la même erreur.
    Le PC que lequel je fait mes tests est sous windows XP avec labview 2010 SP1 et NI DAQ mx 9.3.5 ( fourni avec la carte PCIe 6321).
    Cordialement,

    Bonjour ErwannLM,
    Merci d'avoir posté sur le forum NI.
    L'erreur et le VI que vous citez me fait penser que vous utiliser des fonctions de l'API du driver NI DAQ Trad. Or ce driver n'est pas compatible avec les cartes de la Serie X (63XX). Le driver à utiliser est effectivement le driver NI-DAQmx. Vous pourrez trouver des exemples d'utilisation de ce driver dans la recherche d'exemple de LabVIEW (Aide»Recherche d'exemples...).
    Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
    N'hésitez pas à poster votre code pour infirmer/confirmer mes propos.
    Bonne journée,
    Flo
    Open Diagram First

  • Compatibil​ité carte PCI-6281 et DAQmx 8.1

    Bonjour, voici mon problème : je possède une carte d'acquisition NI PCI-6281 que j'aimerais utiliser avec le logiciel Labview 7.0. Avant d'installer la carte j'avais Daqmx 7.1 (fourni avec labview 7.0) mais cette version du driver n'a pas reconnu la carte. Du coup j'ai installé le driver fourni avec la carte : daqmx 8.7.1 mais ce driver n'est pas supporté par ma version 7.0 de labview... Donc j'ai téléchargé daqmx 8.1 la version la plus récente compatible avec labview 7.0. Le driver a bien reconnu ma carte et l'a installé mais il s'avère qu'aucune voie physique n'apparait dans le MAX... Pensez vous que le driver n'est pas compatible avec ma carte? Avez vous de ssolutions à me proposer? Car là je commence à desespérer! Merci d'avance.

    Bonjour aurelieB,
    Labview 7.0 et votre carte PCI-6281 sont bien compatibles avec le driver NI-DAQmx 8.1. Voir le readme du driver 8.1 sur le site ni.com:
    http://joule.ni.com/nidu/cds/view/p/id/319/lang/fr.
    Pour visualiser les voies physiques de votre périphérique depuis MAX utilisez le panneau de Test, ou créer une tâche. Ce faisant vous aurez accès à vos différentes entrées sorties.
    Cordialement,
    Rémi D.
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    >> Les rencontres techniques de NI - Mesures et acquisition de données : de la théorie à la mise en ...

  • -10401 sur carte PCIe 6321

    Bonjour,
    j'ai l'erreur -10401 qui me revient lorsque je souhaite configurer un port en entrée de la carte PCIe 6321 ( 3 ports de 8 bits chacun ).
    J'utilise le sous-vi "DIO-configurer un port".
    J'ai vérifié tous les paramètres.
    J'ai également testé le sous-vi"Lire une ligne numerique" et j'obtient la même erreur.
    Le PC que lequel je fait mes tests est sous windows XP avec labview 2010 SP1 et NI DAQ mx 9.3.5 ( fourni avec la carte PCIe 6321).
    Cordialement,

    Bonjour ErwannLM,
    Merci d'avoir posté sur le forum NI.
    L'erreur et le VI que vous citez me fait penser que vous utiliser des fonctions de l'API du driver NI DAQ Trad. Or ce driver n'est pas compatible avec les cartes de la Serie X (63XX). Le driver à utiliser est effectivement le driver NI-DAQmx. Vous pourrez trouver des exemples d'utilisation de ce driver dans la recherche d'exemple de LabVIEW (Aide»Recherche d'exemples...).
    Learn 10 Functions in NI-DAQmx and Handle 80 Percent of Your Data Acquisition Applications
    N'hésitez pas à poster votre code pour infirmer/confirmer mes propos.
    Bonne journée,
    Flo
    Open Diagram First

  • Comment configurer une carte 6052E avec le max livré avec NIDAQmx9.8 sous windows 7

    Comment configurer une carte 6052E avec le max livré avec NIDAQmx9.8 sous windows 7

    Vous devez pouvoir voir les panneaux de tests, de même pour l'option de configuration, j'ai aussi DAQmx 9.8. Cf captures en pièce jointe.
    -Que voulez vous configurer exactement ?
    Aussi, répondez à mes autres questions si jamais vous ne voyez pas exactement la même chose que moi.
    Cordialement
    Victor F. | Application Engineer
    Certified LabVIEW Developer | Certified TestStand Architect
    National Instruments France
    Pièces jointes :
    MAX1.jpg ‏73 KB
    MAX2.jpg ‏51 KB

  • Différence carte PCI 6527 185681G-01 et PCI 6527 185681D-01??

    Bonjour,
    J'ai deux PC l'une avec une carte PCI 6527 185681G-01 et l'autre avec une carte PCI 6527 185681D-01?
    Je plug la carte du premier pc, j'allume et cela fonction.
    Sur le deuxieme pc, je ne plug pas la carte, j'allume le pc démarre correctement et voit bien la carte.
    J'éteins, puis je plug. L'écran reste noir et ne veut pas booter.
    Je n'arrive plus a rebooter le PC tant que la carte est dans le PC.
    Quels sont les différences entre une cartes PCI 6527 185681G-01 et une carte PCI 6527 185681D-01 qui pourrait justifier le fait d'avoir cramer la seconde carte??
    Cordialement.

    Bonjour Donny_certia,
    Il n'y pas de différence fondamentale entre deux révisions qui pourrait provoquer cela.
    Avez-vous fait des tests croisés? Essayez de switcher les pc et les cartes PCI.
    Si vous avez d'autres ports PCI, il vous est également possible d'essayer.
    Lorsque le pc ne démarre pas, y a t'il au moins la fenêtre du bios qui s'affiche ?
    Apres ces tests, vous serez en mesure de voir s'il s'agit de la carte PCI ou du PC.
    Si cela vient de la carte, je vous invite à nous contacter pour lancer une procédure de réparation
    Cordialement.
    Paolo_P
    National Instruments France
    #adMrkt{text-align: center;font-size:11px; font-weight: bold;} #adMrkt a {text-decoration: none;} #adMrkt a:hover{font-size: 9px;} #adMrkt a span{display: none;} #adMrkt a:hover span{display: block;}
    Travaux Pratiques d'initiation à LabVIEW et à la mesure
    Du 2 au 23 octobre, partout en France

  • How to get counter values from pci 6221 card?

    Hii
     I am using PCI 6221 card .. In that i am using the ctr o .. In my application i am using Linear encoder to measure the Lift movement.. so from software how to access the counter values i.e how much mm it moves... 

    Measure Angular Position.vi in the LabVIEW examples will be a good starting point. Adapt it to Linear Encoder by clicking on the selector below DAQmx Create Channel.vi.
    You can also create a corresponding DAQmx Global Channel (or task) in MAX and then use it in your code.
    Feel free to post back if you need further help.
    Message Edité par JB le 10-31-2008 02:15 PM

  • How Do I enable multiple trigger voltages on the PCI-6221 using NI-DAQmx?

    I am using the PCI-6221 to do some simple data acquisition.  The idea is to allow three different analog voltages to trigger the data acquisition state.  I currently have the code set up for one voltage trigger but I am not sure what needs to be done to add the two additional trigger voltages. Any ideas?
    Thanks.
    Solved!
    Go to Solution.

    Is it possible to do something as simple as this:
        DAQmxErrChk
            (DAQmxCreateAIVoltageChan(taskHandle,"Dev1/ai0","",DAQmx_Val_Cfg_Default,0.0,5.0,DAQmx_Val_Volts,NULL));
        DAQmxErrChk
            (DAQmxCfgSampClkTiming(taskHandle,"OnboardClock",3000.0,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,3000));
        DAQmxErrChk
            (DAQmxCfgAnlgEdgeStartTrig(taskHandle,"Dev1/ai0",DAQmx_Val_Rising,0.7));
    or will I need to put the trigger on PFI0?

  • How do i create 6 digital 25Hz PWM output signals with my PCI-6221 card?

    Hi!
    I´m a student, who´s trynig to control a gasturbine process for my diploma thesis. The control program should be written in LabView 8. I need to control 6 25 Hz PWM signals for the gasvalves. The  needed accuracy of the duty cycle has to be about  0.1 %.
     A  tech. engeneer from  NI  told  us , that  we can  do this by using one single digital output for each PWM.
    Now, after a while, i need to implement it into my program. But there are troubles:
    My NI-PCI-6221 standard card only has 2 couteroutputs and only the first of the 3 ports seems to be buffered (Error Nr.  201062)...
    I tried to do the programming, by manipulating the "DIO_PWM_50Hz.vi" I found in google.
    Does anyone of you have any information or helpful examples how i can create these PWM with my card, or did I get a wrong Information by the salesagent (...not the first time....)?
    Thanks for your help
    Tobi

    Here you can find an example, how to do this:
    http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=DE27921DB53A4D8DE034080020E74861&p_...
    As the text says, best would be to use the counter. As your Hardware has only 2 Counters, you would need additional hardware. Best would be to use a Counter-Card (660x), thes boards have up to 8 counters, so you coulkd control your 6 gasvalves indipendently.
    The soultion with the timed digital outputs of the m-series boards would only work, if you can use the same timing (one counter) for all 6 outputs.
    Hope this helps!

Maybe you are looking for