Bug: Publish Settings Target Directory resets on open

Using Edge Animate (EA) CC version 2.0.1.268.25632
Windows 8
Reproduction:
Create new file. Save in project folder.
Open Publish Settings and change Target Directory (in my case to a few directories above).
Publish and save file.
Close EA and reopen.
Open file from Welcome screen and check publish settings target directory.
For me it is always reset to .\publish\directory
Is this expected behaviour. If not, is there a way to fix it?
Many thanks,
Patrick

Joe, I can confirm this issue, as well (Win 8.1 / 64bit).
Patrick, I guess for the interim, a workaround is to keep the default settings - publishing to a sub-folder under the project parent folder.
Darrell

Similar Messages

  • Air 3.6 not available in publish settings after install - Flash CS6

    After installing Air 3.6 beta, Flash CS6 does not have Air 3.6 available in the publish settings - target. Highest available target is Air 3.4.
    System: Mac Book Pro-Retina, OS - X Lion.

    This is a mystery to me. On my Mac, I have Flash CS6 installed, and it told me at install time it was installing AIR3.5 at the same time. However, in the Flash Publish options, I only have AIR3.2 available?????
    I installed AIR 3.6 Beta, and it told me it was upgrading AIR3.5 to 3.6 huh ???? but still not available anywhere I can find it. I can't find it anywhere, and still only have AIR3.2 in the \Applications\Adobe Flash\CS6 directory, and in Publish settings.

  • The publishing settings page does not open when I click on the domain name and the iWeb application will not stay on the dock.

    Hello,
    I have been trying to help a friend who is having problems publishing her website. (She has done so previously using Mobile me)
    There seem to be a couple of things wrong with the application,
    1     if I drag the application icon onto the dock, it won't stay there
    2     I wanted to change where her site is published to (she has bought a domain name and has a hosting service now) but when I click on the domain name I do not get the "site publishing settings page" so we can't enter the new details.  All that comes up is the main page of her website.
    I would suggest uninstalling and re-installing Iweb, to see if that clears the problem, but as Iweb came pre-installed with her Imac, I am not sure that we can do this.
    Any ideas please?
    she's using and imac 24 in (approx 4 years old) and running osx 10.5.8

    NO - not correct.  Even if you are still using iWeb 08, you can still publish to another host and not MobileMe.  You do this by selecting the option 'Publish to a local folder" and this will publish the site to your desktop and you can then use an ftp programme such as Cyberduck to upload your site to your host.
    MobileMe will not be here after the end of June, so you will have to find alternative hosting.  They are not taking any new subscriptions.
    On new Macs, iLife 11 is pre-installed, but only iPhoto, iMovie and GarageBand are included, not iWeb and iDVD. The Apple Online store is not selling the boxed version of iLife 11 any longer, so if you want to upgrade to iLife, then you'll have to look online at Amazon.com or Amazon.co.uk for a boxed set of either iLife 09 or iLife 11.  Both contains iWeb 09, which is what you would want.

  • SharedObject not working with 'Debuggin Permitted' NOT checked in publish settings

    Hello,
    I have run into a strange problem writing out SharedObject
    data. If I select(check) Debugging permitted in the publish
    settings the data is written correclty. If I uncheck the option,
    the data is not written. The flush() call returns true in both
    cases.
    Could this be a security related issue?
    Thanks,
    Brad

    Hey florsignol,
    I understand that your monitor, while appearing in System Preferences, doesn't display anything; however, it works fine in BootCamp. These are the applicable troubleshooting steps I would go through to resolve the issue:
    1. Reset the System
    You can reset the Mac's parameter RAM and SMC.
    2. Reset the resolution
    Start by resetting the Mac's parameter RAM. If the display does not come up, was previously set to an unsupported resolution, and still results in no video:
    Start up in Safe Mode.
    From the Apple () menu, choose System Preferences.
    Choose Displays from the View menu to open the preferences pane.
    Select any resolution and refresh rate that your display supports.
    Restart your computer.
    from: Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    All the best,
    Delgadoh

  • Failed to import publish settings file in Azure Toolkit for Eclipse with Java downloaded from Azure Management Portal

    I tried to deploy the Hello World JSP application to Azure from Eclipse following the instructions at http://msdn.microsoft.com/library/azure/hh690944%28VS.103%29.aspx. Got the following error when trying to import Publish Settings file downloaded from Azure
    Management portal:
    Importing MyMSDN.publishsettings file failed. Reason: failed to parse file. Ensure publish settings version is 1.0.
    Could someone help me solve this problem? Thanks.

    Hi huihuang,
    It seems there is some issue with your publishsettings file, could you open this file and copy the content here? Or please have a look at this article:
    http://gauravmantri.com/2012/09/14/about-windows-azure-publish-settings-file-and-how-to-create-your-own-publish-settings-file/ for more information about it.
    Best Regards,
    Jambor
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Flash CC crashes after publishing iOS app + publish settings are not being saved to file

    I have two issues:
    1. Flash CC crashes every time I publish an iOS app
    2. My Publish Settings are not being saved
    1. Flash CC crashes every time I publish an iOS app
    Since yesterday Flash CC keeps crashing right after I publish an iOS app. The app is published correctly though. I tried everything from restarting my MAC, reinstalling Flash, removing the folder "Flash CC 2014" inside Application Support/Adobe. But all this did not work.
    2. My Publish Settings are not being saved
    Since the first day I installed Flash CC, it did not save my publish settings along with the .fla-file. I never had this issue with Flash CS 5.5. This was not a very big issue, but now every time I publish an app and Flash CC crashes I have to fill in all the publish settings manually. Now I'm getting frustrated. Even saving my settings as a preset, storing it inside a folder and importing it again, won't help. Then I will get the message: "Import failed: invalid profile file."
    Can please anyone help me with these issues? It is quite time consuming to continuously enter the settings manually after every crash.
    Thanks!

    reset your preferences -
    after effects:  http://helpx.adobe.com/after-effects/using/preferences.html
    dreamweaver:  https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html
    flash:  http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html
    illustrator:  http://helpx.adobe.com/illustrator/using/setting-preferences.html
    indesign:  https://forums.adobe.com/thread/526990
    photoshop:  https://forums.adobe.com/thread/375776
    photoshop elements:  http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm
    premiere pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

  • Placing the file in UTF-8 format in Target Directory

    Hi Experts,
    Can any one please tell me how to place a file in Target Directory by PI in UTF-8 format.
    It is a file to file PassThrough (no IR part) scenario and in receiver File Adapter I have used File Encoding as UTF-8
    but still PI is not placing the file in UTF-8 format in the Target Directory.
    Are there any modules by which the files are converted to UTF-8 format.
    Can anyone please help me out.
    Thanks and Regards,
    Prajwal

    Hi,
    Please let me know if I need to change the TransferMode,File Type and FileEncoding in both sender and receiver channel.
    I tried the below settings but still the file is not being placed in UTF-8.
    Sender CHannel:    TransferMode         Text
                                   FileType                  Text
                                   FileEncoding            UTF-8
    Receiver Channel    TransferMode         Binary
                                     FileType                  Text
                                     FileEncoding           tried with UTF-8 once and tried with blank
    Can any one throw some light here.
    Thanks and Regards,
    Prajwal

  • 10.0.2 update breaks AIR publish settings option

    Since updating to 10.0.2, I have been unable to access the AIR settings (File -> AIR Settings) for my FLA file which is published as AIR 1.5.
    I get an JavaScript error pop up about "Apollo_OpenSettingsDialog.jsfl" every time I click on the menu option. The same thing happens when accessing the AIR settings through File -> Publish Settings -> Flash (tab) -> Player [Adobe AIR 1.5] (settings).
    This has rendered my previously working AIR project totally unusable as I can no longer make any changes to the AIR settings. Four months of work is now inaccessible.
    Any ideas how to resolve this?

    Phew! Just got it working again.
    Had to republish the .swf file and more importantly (I think) this also recreated the application descriptor file, both of which had been moved from their original locations. Once Flash could see these files I could access the AIR settings without the error message.
    I think I might report this as a bug as the pop up error panels should not be the way of alerting a user about an error - they're not very user-friendly!

  • File to file scenario..............file lost if target directory incorrect?

    hi forum experts,
    i have a file to file scceanrio....without BPM....
    there is only one mapping ...in the receiver determination......
    the problem is........
    when in the receiver communication channel....in the <target directory>....i give something absurd.....e.g. '-', the file cant be put to the desired directory...
    and the file is lost.............moreover nowhere in the rwb i can see what the error is.......in rwb it shows file delivered successfully........
    now how can i retrive the lost messgae.....how can i resend the message from rwb or MDT............
    is it possible from MDT to resend the message payload again????
    pls help

    Dhar,
    Is this is development or production? Also why you have given the target direcotry as '-' ?  Is this your requirement?
    Anyway you can post the same message once again from RWB. Since it is file to file scenario you can post from RWB.
    Go to sxmb_moni and open your message. From the source payload right click and select view source. Then copy this payload and go to RWD ---> Adapter Engine ---> Test Message ---> Here you give your Source business system, Target business sytem and all the parameters. Also you paste the payload here. Also give your user name and password and select Quality of service BE. Then send the message. You will see a new message in sxmb_moni.
    Also would recommend to give a name for target directory.
    Check this weblog for some help on this:
    /people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible
    /people/michal.krawczyk2/blog/2005/09/16/xi-how-to-test-your-mapping-in-real-life-scenarios
    ---Satish

  • Sender Channel - File Archiving - No Create Target Directory option

    Hello,
    We are getting an error because our Sender channel is always trying to create the target directory when saving a file in our archive location. 
    Using a Receiver Channel the option "Create Target Directory" exists, so I can disable that option.  Is there a way to disable that option on a Sender Channel when archiving?
    Thanks,
    Matt

    Reviewing the settings available from Help.sap.com says:
    "Configure Sender File Adapter"
    Under Processing Mode, specify what is to happen to files that have been processed successfully.
    u25CB       Archive
    u25A0       To add a time stamp to the file name, select Add Time Stamp.
    The time stamp has the format yyyMMdd-hhMMss-SSS. The time stamp ensures that the archived files are not overwritten and it enables you to sort them according to the time that they were received.
    u25A0       Enter the name of the Archive Directory.
    I do not see anything in here that helps clear up this issue.
    Also, I have given a target directory.  The problem is it still tries to create that directory. 
    Thanks,
    Matt

  • In comm channel target directory is %variable%.txt

    hi,
         warm wishes...
    if in communication channel target directory is %variable% then what does it mean..
    thanks in advance,
    jp.

    Hi,
    If you are new to SDN, please read /thread/117188 [original link is broken]
    Please do not open multiple threads at the same time and follow up on the answers on your existing threads. Awar points for helpful answers, close your threads and make SDN a better place.
    Answering your question, the %variable% is used set the directory name dynamically using the concept of Variable Name Substiution.
    Refer to the last part of this link to understand this better,
    http://help.sap.com/saphelp_nw04/helpdata/en/bc/bb79d6061007419a081e58cbeaaf28/content.htm
    Regards
    Bhavesh

  • Universal publish settings for a particular project?

    i was wondering if it was possible to set up a universal publishing directory for a given project so that i do not have to go and manually change the publish settings for each individual .fla.
    any help would be much appreciated.
    thanks
    angus

    Gustavo,
    Your end result should be DVD, which is 720 x 480 NTSC or 720 x 576 PAL.
    Use a SD widescreen sequence setting and downrez your HDV or let the camera do that for you by capturing SD format. If you have captured HDV, you can either downrez by using Motion/Scale to fit your SD resolution or use Scale to frame. The latter has a small drawback in that it will result in small black bars left and right, that will normally not show up when played on a TV.

  • Publish Settings for iOS provisioning

    Under http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html#id_27206 there is a bullet point titled, Provisioning File Path For Signing The App.
    There it says, 'Download the mobile Provisioning file path after creating it and then point the file to the "Provisioning file path for signing the app" field.'
    What does that mean? I didn't know it's possible to download a file path! In that last quotation, should Adobe have said "file", not "file path"? Should Adobe have said, "select the file by clicking on the Provisioning File Path for signing the app field"?
    In Director's Publish Settings window, there is a button labeled "…" to the right of that Provisioning File Path for signing the app field. When I click it, I see a file opening dialog window that initially shows contents of a "Provisioning Profiles" folder. I see four mysteriously-named files showing there, and I cannot figure out which one I should choose. I can't even find those four files or that "Provisioning Profiles" folder on my computer (I searched using the OS X Finder).
    Also, Adobe should revise http://helpx.adobe.com/director/using/publishing-ios-devices-using-director.html#id_27206 to explain this better.

    If Adobe did revise that web page I linked to, they should clear up two other things:
    First, on that page, it says:
    "You can use the template info.plist from the /Configuration/Publish iOS Resources/ folder and make changes to it as needed by your app."
    In my Director (with the hotfix2 update installed), the field that quotation refers to is pre-filled with Macintosh HD:Applications:Adobe Director 12:Configuration:Projector iOS Resources:Info.plist so /Configuration/Publish iOS Resources/ is wrong.
    Second, on that page it gives a final instruction to "Click Publish." It gives no hint of what to do next.
    Publishing creates a file in the same folder as the Director movie source file used to make it. That new file's name ends with a .ipa extension.
    I wish there were links to apple.com web pages that explain what to do with the published file.
    For testing, here is what I did: On my computer, double-clicking that .ipa file caused iTunes to launch. I clicked the button for my connected iPad, seen in the upper-right of the iTunes window. In the toobar that stretches across the top of the window, I clicked on Apps. I clicked the Install button. I clicked the Apply button in the lower-right corner of the window.
    An icon for my test app showed on the iPad. I tapped it and the app launched successfully.
    I hope that this explanation helps somebody, and that Adobe fixes that web page.

  • Publish Settings - Flash Player 11 problem

    Yes correct I'm talking about Flash Player 11, thats what it says in Flash CS5 software.
    Whatever I do in Publish Setting, Flash software always returns option to be Flash Player 11, i don't get this. I choose Flash Player 8 and AS 2.0 and re-open Publish Settings it is again back on Flash Player 11 and AS 3.0.
    Why is it doing that ?
    First screenshot
    Second screenshot

    Try installing your Flash CS5 again

  • Ipa publish settings woes

    Hi I'm trying to get my 'Test.ipa' compiled.
    But I can't get my ipa to compile - when I hit 'Publish' button, the dialogue asks me where to save 'Test.exe'
    (-surely that should be 'Test.ipa'?)
    Then a progress bar whizzed by, but no 'Test.ipa' appears..
    I have previously made apps for the app store, so I know a bit about provisioning files etc.
    I updated director 12 with hotfix4
    I created a new provisioning profile for the app using a wildcard bundle identifier
    I am using my developer profile
    Also confused about what to do with 'info.plist'
    The documentation breezily states:
    "You can use the template info.plist from the /Configuration/Publish iOS Resources/ folder and make changes to it as needed by your app."
    -so I made a copy of info.plist, put it in my project folder, and point the publish settings at it..
    What settings would I need to change?
    the documentation also says:
    "..values for the following fields are picked up from the iOS tab at the time of publishing"
    so i assume that by editing the iOs publish settings info plist gets the info it needs?
    Or what?

    "File" -> "Publish Settings" -> "Formats"
    Check for "iOS Projector" and uncheck everything else. Make sure you really picked a name that ends with *.ipa in the field where the filename is specified.
    "File" -> "Publish Settings" -> "iOS"
    Here you put in all the info that is needed and that has to be correct with the provisioning file and the other stuff apple invented to make things secure.
    The "info.plist" (you can open it by just doubleclicking) will contain all the infos that are related to the app. I guess it would be better if this file would also be produces with director and you would get some interface to insert icons, splashscreens and the other settings, but somehow it is this way now.
    You can add for example this key to the info.plist that tells your app to deal with the retina display:
    DIR_disable_retina YES
    YES is the value you have to add. This will turn off retina if not needed.

Maybe you are looking for

  • Can someone tell me how to get my photos back?

    Apple replaced my iphone 4s due to hardware failure. When I received my new iphone 4s I did a restore using icloud backup so I could get all of my contacts, photos, etc. Well everything has come back but my photos. It keeps saying downloading but it

  • How do I home share my books to someone else?

    I am connected to someone wlse's library and their books aren't showing up. How do I get their books?

  • I can't  secession itunes account

    Today I checked my itunes account, then there is no my name in my account and there is incorrect name. So I want to secession my account, but is not working. Could you help me, please?

  • Anyone having issues with adding tabs in finder?

    I upgraded from ML to Mavericks on my MBP r 2012, which was quite smooth,  Finder does have tags...and works well, but I could not find how to add 'tabs'. There was no + sign anywhere and I could not add any tool for doing that from trying to customi

  • In my finder border window there is a jpeg file embedded

    In my finder border window there is a jpeg file embedded that I cannot remove, everytime I try to drag it out it opens, how do I remove it?