[bug report] 1.0.3 firmware wipes out Thai font Display

I got 4th Gen iPod nano, with a fair Thai font display from 1.0 to 1.0.2
but after I tried to update a new firmware to 1.0.3 last night, it wipes away Thai font Display. All song and artist names in Thai are all gone and I have no choice but clean restore again to 1.0.3
The song and artist names are working after I freshly have a clean restore but, then, after try adding more songs, the Thai text display ability is all gone again.
Now I climb down and let it back downgrading to 1.0.2
Please let me know if this issue could be passed to iPod fireware development team
Thank you

Thanks, Whisp.
As Tom said, there is no menu languages option for Thai, but the iPod will do support Thai Display.
and it is now not working on 1.0.3
More info, I have discussed with other users in Thai forum, they also have the same problem just like me. They can solve this by reset the iPod, however, the bug will repeat every time if they add songs into iPod.
I'm not too sure this bug effects the other foreign language display so.

Similar Messages

Thai Font on web after genereate by report builder is "????" (Can not read)

Hi Guru...
I'm use report builder 10 g for build report
After i'm generate report by Run paper Layout ... Thai font is ok
but if i'm generate report by Run web layout .. Thai font is ?????
NLS_LANS = THAI_THAILAND.TH8TISASCII
Please help me for config this

Hi AM_Kidd.
Thanks for your reply.
I have done a complete uninstall and re install of iTunes and all related apple programs from my laptop through control panel, add remove programs and also by going through program files and deleting all tracers of any left over folders remove programs may have missed.
My apologies for forgetting to add this in my original post.
Thanks again

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR....

BUG REPORT FIRMWARE 5.1.7 PLEASE FORWARD TO SUPERVISOR.
The spa-3102 has the following two bugs.
When the unit sends a hook-flash to the fxo port it:
a) does not send the hook flash to the fxo port for PSTN Hook Flash Len: Instead it uses a very short pulse of about 100ms or 1/10 of a second. It should honor the PSTN Hook Flash Len configurable parameter of .2 – 1.5 seconds.
b) Does not change the line voltage from –7 (off-hook) to –48(on-hook) during a flash-hook to the fxo port. Instead it varies the voltage only by about 2.5 volts.
This was reported as early as June 07 to linksys support. It is reported they agreed and would fix in the next firmware release. There is info that firmware 5.2 being released and is this fix in 5.2 and how can I get it.

Although the problem is still not solved, at least I now know WHY the problem is happening... and Apple's Firmware Update is NOT to blame!
Through a series of coincidences, I was actually lucky enough to get in touch with the engineers in Apple's Airport firmware division, and they were helping me to nail down this problem.
Turns out that Apple takes great PRIDE in the fact that they are one of the VERY FEW manufacturers who make routers that behave properly in this regards: they SPECIFICALLY test for their Airport Extreme routers to allow you to connect to servers behind the NAT by way of the public WAN IP address of the NAT box. This is the way that apparently the NAT/DHCP specification is SUPPOSED TO WORK! You're SUPPOSED to be able to connect this way, if you so desire.
So what was causing the problem on my network, then?
Something I hadn't thought about... the Vonage Linksys RTP300 router that we're using for our Vonage VoIP service. Turns out that this router does NOT support clients behind the NAT connecting to servers behind the NAT by way of the public WAN IP address.
Linksys is to blame, not Apple!
And apparently, this feature may have actually been working in an earlier
firmware update, but apparently, Vonage AUTOMATICALLY pushes firmware
updates to RTP300's, apparently without user notification:
<http://www.vonage.com/help.php?article=1066&category=90&nav=5>
And a forum thread on vonage-forums.com seems to indicate that the 1.00.60 firmware in the RTP300 started getting pushed to customer units on or before 1/26/06, making it less than a month after Apple shipped the 5.7 firmware update for AirPort Extreme Base Stations:
<http://www.vonage-forum.com/ftopic10915.html>. So if the problem cropped up then, it's possible that I accidentally attributed it to Apple when really the RTP300 got a firmware update around then too which may have broken this feature (assuming it was working before then).
Power Mac G4 QuickSilver Dual 800 MHz Mac OS X (10.4.4)

Bug report: Screen times out when other side is no...

Bug report: Screen times out when other side is not sharing video. The phone locks and of course the other party cannot see anything. Please fix.
Using WP 8.1.1 Developers Preview.

Hi and welcome to the Skype Community,
Can you please share which platform and which device you are on?
Also are you referring about a one-way video call here where only you are sending video, but the other party doesn't send their video back?
Follow the latest Skype Community News
↓ Did my reply answer your question? Accept it as a solution to help others, Thanks. ↓

BUG REPORT: Layers with 100% height in timeline knock bottommost layer(s) out of scrollable area

I have tried to post this twice to the official bug report page, but (somewhat hilariously) the bug report page bounces it back with an internal error about an unknown email address, so I'm posting here too just in case. As I have no idea how to report a bug about the bug report page, I decided I might as well just post the bug here.
CS5.5/Windows 7 - Verified on 6 different machines, some 64 bit, some 32 bit
If I have a layer in the timeline that has been expanded to 200% or 300% (via Layer Properties) height, the bottom-most layers gets pushed outside of the viewable area. The scrollbars simply don't scroll that far. I double-checked and this is new since CS4--which still works correctly--so never let it be said that the engineers aren't working on the code! :-/
Basically, I use this for audio layers, as it is nice to expand them to 200% so it's easier to see the waveform and guess where certain words are ending, etc when doing timeline syncing.
It can be worked around by expanding the timeline to be tall enough to bring everything into view, so I suspect the bug lies in the scrollable area calculation. However, since space is at a premium, usually I only have about 5-6 layers worth of space allocated to the timeline panel, so this bug hits me quite frequently (since I have all my old projects set up with 200% audio tracks).

sam wrote:
I have the same soundcard (or at least the same modules loaded) and I'm getting good volume.
Things to check:
If you have the pcm and main volume all the way up in alsa mixer that should be it. You may have to adjust the volume separately if you use esd, arts, pulse, or jack (I don't use them).
Another thing to test is to make sure your using alsa not oss, and you may want to raise the oss level and see what happens.
The final thing is you want to check to see which sound device the audio programs are using (usually found in the preferences).
If none of that works, then you're out of luck. It would help if you post what sound programs you are using and what sound daemons you are using.
Here is my Daemons line from /etc/rc.conf
DAEMONS=(@syslog-ng @network @netfs @crond @alsa @hal @fam)
So i would think im using alsa not oss. but how would i go about raising the oss to make sure? there is no "oss" option in alsamixer. I have tried just abuot every audio progream there is and even firefox, all of them produce about half of the maximum volume level.

How to find out bug report status or disposition?

Is there someone to contact; or, is there a way to find out the disposition of a bug report which has possibly not been assigned a number yet, or whose subject has been changed (i.e. can't be found in a search) ?
About 3 months ago I submitted a report with the subject, "TrueTypeFont.open() ..." related to Linux JDK 1.5.0 runtime.
Thanks,
Dick

Seems like a search of the bug report submission
queue would be useful.Use this:
http://developers.sun.com/contact/feedback.jsp?referer=http://forum.java.sun.com&category=sdn&mailsubject=Forums%20or%20Community
It's as pointless as any other measure in getting Sun to do what you want. ;)

Bug report, how do I find out what is wrong?

my computer keeps getting bug reports stuck all over the desktop. When I print them it is 3 pages long and I dont know how to use the information from it. It only occurs when my son is using Runescape an online game. My son says he has reported all the errors when the computer prompts him to. I did find an Bug Report that seems to be associated with this problem. Our computer did shut down occasionally also, but since I switched the location of the new memory I added it has not continued. The reason I am checking with this website is because this is where the reports are going. The first part of the error report from my computer is this:
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x809D50E
Function=JVM_FindSignal+0x10882
Library=C:\PROGRA~1\Java\J2RE14~1.2\bin\client\jvm.dll
Current Java thread:
     at r.a(Unknown Source)
     at r.a(Unknown Source)
     at client.t(Unknown Source)
     at client.B(Unknown Source)
     at client.a(Unknown Source)
     at a.run(Unknown Source)
     at client.run(Unknown Source)
     at java.lang.Thread.run(Unknown Source)
And the last part of the report reads this:
Local Time = Fri Mar 04 21:38:29 2005
Elapsed Time = 58
# HotSpot Virtual Machine Error : EXCEPTION_ACCESS_VIOLATION
# Error ID : 4F530E43505002EF
# Please report this error at
# http://java.sun.com/cgi-bin/bugreport.cgi
# Java VM: Java HotSpot(TM) Client VM (1.4.2-b28 mixed mode)
What do I need to do to fix this problem? Could it be Runescapes issue? Is there other information that is more important to this? I really appreciate any help I can get with this problem. And I am sorry for being so long. I have included the Bug Report I found that is an almost exact duplicate of our issue.
Thank you again, Linda Peterson.
COPIED FROM BUG REPORT SEARCH AREA
Bug ID: 5092499
Votes 1
Synopsis IA64 - EXCEPTION_ACCESS_VIOLATION on IA664 W2003
Category java:runtime
Reported Against 1.4.2_05
Release Fixed
State In progress, bug
Related Bugs
Submit Date 26-AUG-2004
Description OS: Windows2003 [5.2.3790]
Chip: Itanium 2
JVM: Sun 1.4.2_05-b04 64-bit server VM
Error message:
EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x84D5F10
Function=[Unknown]
Library=C:\j2sdk1.4.2_05\jre\bin\server\jvm.dll
Error ID: 4F530E43505002EF
xxxxx@xxxxx 10/5/04 20:02 GMT
Work Around N/A
Evaluation Post tiger
xxxxx@xxxxx 2004-09-02
Comments
Include a link with my name & email
Submitted On 05-FEB-2005
JavaJava13 Hey just wondering. Java is used for runescape on my computer, and it seems to be constantly crashing lately. Not only the game is crshing, it seems to even take down the whole computer with it. Sometimes the computer restarts and I get an error message.
"Your system has recovered from a serious error"
Java continues to add error reports to my desktop with this code: 4F530E43505002EF
Anyone help?

try checking with runescapes FAQ/tech support. I play
WC3: RoC and i only got that same memory location
error(0xc0000005). I got that memory error when I
used a no-cd third party program when they upgraded
the server. So, my advice is check on the FAQ for
errors and ask your son if he is using
ANY third party programs.The 0xc0000005 error is a standard error on Windows that can occur for any number of reasons.
It means something in the application tried to access memory to which windows knows the application should not be accessing.

Zen bug reports... where to submit? Firmware & Media Explorer bugs

There seem to be two rather annoying bugs (actually, three, but the firmware ones are closely related) - there should be a separate forum for bug submission...
The firmware bugs are related to the embedded graphics and are present in the updated firmware, too.
The first bug: embedding a graphic in an MP3 properly, with tested tools such as ID3Tagger, works fine in any player supporting the image display - but Zen will *not* display the graphic unless the header's "Album" field is filled, too. If the "Album" field is empty in ID3v2 (or v), Zen will never display the graphic.
The second bug seems related to this: if the "Album" field has the same value in more than one file in the same directory (or playlist), Zen will only use the first indexed graphic for all those files. As a result, right now I have 0 various Star Wars themes in my Zen, each file with a different graphic embedded in it - and yet Zen shows the same graphics in all of them.
The third bug is in the Media Explorer: every time the player is plugged, CTPlyLsU.exe loads. But very often, it will load as a new process each time - and it will NOT be terminated after the player is disconnected, but it will stay in the memory! When that happens, every time the player is detected again, a new instance of the process will be started and used. I plugged the player in 0 times yesterday, and I had 0 instances of that process devouring the resources.

The third bug is in the Media Explorer: every time the player is plugged, CTPlyLsU.exe loads. But very often, it will load as a new process each time - and it will NOT be terminated after the player is disconnected, but it will stay in the memory! When that happens, every time the player is detected again, a new instance of the process will be started and used. I plugged the player in 0 times yesterday, and I had 0 instances of that process devouring the resources.
Strange, CTPlyLsU.exe is on my system but based on the task manager it doesn't load at all when the player is connected and everything works fine.Message Edited by jpalm on 0-30-200709:6 AM

Bug Report Safari / Taskbar follows into Safari

Hi,
I hope my description is correct, respectively understandable.
When I start the Safari, the Taskbar above follows with kind of a wipe-effekt into the Safari and disapears then. This happens only when I start the Safari, not when I switch back to it when already open. Of course this is no big issue but a ugly one, even it's only for a second.
The picture above shows it perfectly and I hope some devs will read this to consider it in the next update.
Cheers,
Roland

Could anyone in the core dev team take a look at this? The number of sites making use of 8192 bit large certs is growing, and Safari is the only browser out there that can't handle it.
It might be worth registering (for free) as an Apple Developer:
http://developer.apple.com/programs/register/
... and then you can use the Bug Reporter to submit trackable bug reports:
http://developer.apple.com/bugreporter/

What are the bugs in N95 8G new firmware V15?Let'...

what are the bugs in N95 8G new firmware V15?

The most important problem in new firmware is in gallery part.After installing new firmware I copy my images in image folder in 8gb hdd.after that every time I go to gallery after 2 or 3 seconds it automatically comes out and I cannot use gallery to view my images .Accroding to some reports I reinstall firmware again but problem still exist.What can I do.

Bug Report E71 - Post (serious) bugs here.

Hi,
Maybe it's wise to have a dedicated bug report topic for the E71.
So not discussions here .. just USEFULL reports.
Bug #1 :
Situation:
- I am having a sip internet-call (native SIP client) with an Asterisk server.
- put the call on 'standby' (by menu Options)
- i press the 'Options' softkey again
- phone freezes. Only battery removal can restart it.
(it also freezes after doing some random key presses .. which i can't remember exactly .. but the standby is not stable.)
Bug #2:
- please fix color-settings for the camera . There is 'purple' all over.

501.21.001 on RM-357 (E71-2) Since upgrading to 501, I've had two major problems. 1) rarely (it's only happened twice), the SMS application will hang when attempting to reply to a message. The original message stays on the screen and nothing will let me out of the app. The phone will respond to the power button, however, and seems to work fine after a reboot. 2) battery life and/or battery meter is terrible. Battery meter will stay near the top then suddenly drop to 2-3 bars remaining. Energy Profiler seems to confirm my power usage is about where it used to be (drawing about 0.12W with the screen off and Gravity running in the background). Phone will then reach 1 bar and give "battery low" warnings, but I'm not convinced the battery is truly low. Last night I was on one bar for over two hours, Gravity was left running, I send and received a few texts, and I was connected to my in-car bluetooth for about 25 minutes, and the phone did not die. On the original firmware, I would never have made it through all that on one bar, which makes me think the bug is with the battery meter, not the battery life itself.

Registry cleaner/defrag wipes out license information, how to fix?

I bought the product after the 30day trial and installed the license key when I received it after purchase verification. Every time the registry defrag/cleaner runs, the product warns me the trial time has expired. I enter the license again. Sometimes I feel this happens when the defrag has not run.
I did on line chat with technical service and that was utterly useless. The directed me through a process I've already done at least 38 times.
If the registry cleaner is the problem, I would have thought a product of this caliber would be more robust to that type of operation.
Regards,
Hank Sundermeyer
Newark, DE
Acrobat XI Pro
Processor: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz 3.40 GHz
Installed memory (RAM): 16.0 GB
System type: Window 7 Professional 64-bit Operating System

Hi HankSundermeyer,
There does not seem to be a need to defrag or even clean the registry in 7. What was once an important maintenance task in 2000 and XP is now not necessary, as the system does take care of itself, it's simply designed better. At the same time the cleaners and defraggers will suggest deleting lots of stuff from the registry.
Unless you are actually able to tell what those registry keys are and why would you want to delete them, I recommend staying away from any such cleaning action. The benefit of the cleaning is doubtful, while the potential for error is rather large.
At the same time thanks for bringing to our notice that the registry cleaner wipes out the licensing information for Acrobat.
Please let me know which 'Registry cleaner' software you are using as I would like to replicate the issue here at my end. Personally I have used ccleaner and have not faced any such issues.
Further you can also raise a bug report by filling the form : https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform

Bugs in ZEN Mozaic EZ300 (firmware 1.04.02)

Creative ZEN Mozaic EZ300 (firmware .04.02) BUG REPORT:
Bookmarks remembers only current track and position within it. Current list of tracks and position of current track within this list are ignored.
So opening of bookmark opens the list of one track (without previous and next tracks)
Pause + Shutdown doesn't remember position within the track.
So next turning on displays last track in the initial position.
(though Shutdown during playback works correctly)
My previous players was ZEN Nano Plus and ZEN Stone Plus with built-in speaker. I really enjoys them.
I have bought EZ300 thinking it will be even better.
Though impossibility of folder's navigation disappointment me deeply.
The last advantage of EZ300 was bookmarks. But they appears buggy... :-(

Hi Severov,
. Bookmark, Pause + Shutdown issue
I have a test unit with me and it is behaving as you described. I wouldn't call it a bug but rather your feedback of the product. I am sorry but I will not be able to comment on why certain features work this way or why has it changed etc.
2.Creative Central - issues with creating correct playlists from MP3-filenames with national characters
I am not familar about this issue, I will make a note of this and see if I can find out anything.
3. What is Creative's plans for new firmware version?
I am sorry but we are unable to comment about?this mainly because such information is not available to us.

Bug report follow-up

is there a way to follow-up on a bug report that i submitted? i have the bug number, but would like to see if the report was understood, filled out properly and determine the status of the bug report.
thanks,
doug

They comment on bugs if actions were taken. Otherwise - don't expect any feedback.

Bug Report: The keyboard focus doesn't automatical...

Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
7. Move the system/keyboard focus in the chat entry edit field and keep it there.
8. Switch to another window, preferably from another application.
9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.

This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

[bug report] 1.0.3 firmware wipes out Thai font Display

Similar Messages

Maybe you are looking for