Bug-Report: 3110c v7.21 using timed profiles freez...

v7.21:
Using timed profile:
After setting the end time and pressing OK the phone freezes!
NSU offers no downgrade or reinstall of the firmware and so a very important feature is lost.
Before updating to v7.21 everything worked fine.
Message Edited by bierbo24 on 27-Dec-2008 07:16 PM
Message Edited by bierbo24 on 27-Dec-2008 07:17 PM

I too have this problem on a 6600 Fold
Version 05.23

Similar Messages

Bug report regarding SSL library used by Sharepoint web server

I have attempted to report this by email to the [email protected] address, but they tell me this is not the correct address to use and have refused to give me a better one or forward my bug report on to the correct people. I'm hoping that by posting it here I will get the attention of someone who can fix the problem.PROBLEM DESCRIPTION:Accessing the Sharepoint web servers (157.55.229.87) is not possible from a Scientific Linux 6.5 system using OpenSSL 1.0.1e. Analysis of the network traffic shows the client successfully connects to the server and sends a TLS handshake. The server responds with a TCP ACK, but does not include a TLS handshake response. After 30 seconds the server tears the connection down with a TCP RST.
This is reproducable with the following command:
openssl s_client -showcerts -connect sexeysschool-my.sharepoint.com:443
DIAGNOSIS:
The client's TLS handshake contains several length fields - one in the TLSv1 record layer, another in the Client Hello handshake payload and one for each of the cipher suites list and extension list. Each of the length headers is 16 bits long, so should be able to contain any value up to 65535.
By hand-editing the handshake packet and replaying it, I have discovered that if the value of the TLSv1 record layer length header is <= 255, the Sharepoint server responds correctly. However, if the length header exceeds 255, the Sharepoint server does not respond.
Under Scientific Linux 6.5, 74 cipher suites (totalling 148 octets) and 5 extensions (totalling 65 octets) are presented by the client, yielding a TLSv1 record layer length of 258 octets.
Please let me know if I can be of any further help, and if possible it would be useful to have some feedback regarding this issue so that we can keep our customers informed.

Hi Mark,
According to your description, my understanding is that the Article Date column displayed with the value based on GMT0 in the Refinement web part.
Microsoft SharePoint stores date and time values in Coordinated Universal Time (UTC, but also named GMT or Zulu) format, and almost all date and time values that are returned by members of the object model are in UTC format. So the value
of the Article Date column stores the date and time in UTC format in the database, and the search indexes the UTC value of the Article Date column after crawling the database so that it displays the UTC value in Refinement web part.
The list column values displayed in the lists that are obtained through the indexer for the SPListItem class are already formatted in the local time for the site so if you’re working on current context list item and fetch a datetime field
like so SPContext.Current.ListItem["Your-DateTime-Field"] you’ll retrieve a DateTime object according the specified time zone in the regional settings.
More references:
http://francoisverbeeck.wordpress.com/2012/05/24/sharepoint-tip-of-the-day-be-careful-when-wor/
Thanks,
Victoria
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Victoria Xia
TechNet Community Support

Photoshop bug report site is broken (using wrong site)

I have a pretty serious Photoshop bug to report -- something that was supposedly fixed in 14.2.1.
I took the time to go to https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform as usual when reporting bugs.
I wrote out the nature of the bug, and all the steps to reproduce it.
But the CONTINUE button is non-functional. At the moment it is IMPOSSIBLE to report bugs to Adobe.

Hi,
We ask that bugs for Photoshop get reported here now:
http://feedback.photoshop.com/photoshop_family
I'll take a look at your other thread about pasted AI files.
regards,
steve

Bug Report: Images broke when using get_blob_file_src and not authenticated

Hi,
it looks like that images which are retrieved with a
apex_util.get_blob_file
call are broken when the user is not authenticated. If the generated image URL is directly called in the browser, it shows a 404 Not found error with a "Invalid Session" in the error log file on the Apache.
The above image URL is generated when using the apex_util.get_blob_file_src function call. If the new IMAGE format mask (eg. in an IRR) is used it seems to be fine, because that generates a apex_util.get_blob call.
Testcase:
1) http://apex.oracle.com/pls/otn/f?p=17201:3 (That's the sample application with page set to "doesn't need authentication")
-> Image column is broken
2) Login with demo/patricks_demo_workspace
3) Go again to page 3 (Products)
-> Image column is displayed correctly
Thanks for looking into that
Patrick
Oracle APEX Essentials: http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Hi Scott,
when I woke up today it also came into my mind that it may has something to do with the referenced P6_PRODUCT_IMAGE in the
apex_util.get_blob_file_src('P6_PRODUCT_IMAGE',p.product_id)call which references a page item on a non-public page.
I think apex_util.get_blob_file_src or better apex_util.get_blob_file shouldn't really care if the "definition" of how the BLOB looks like and where to read the information from is on a non-public page. Because it doesn't read or set actual data it just reads the definition, so it shouldn't be a security issue.
Another question is, if it's so useful to reference a page item to get this BLOB information and not directly being able to specify this information as parameters in the apex_util.get_blob_file_src call. I think I also raised that during the 3.1 beta, because in case if you just want to display a BLOB you still have to create somewhere a page item of type "file browser" to being able to reference it in the get_blob_file_src call. Direct passing of the vales would also be more transparent and self documenting.
BTW, the above code is an example of the "Sample Application" and wasn't made up by me, so probably a lot of people are using this technique to get rid of there own blob download procedures.
Have a nice weekend
Patrick
Oracle APEX Essentials: [http://essentials.oracleapex.info/]
My Blog, APEX Builder Plugin, ApexLib Framework: [http://www.oracleapex.info/]

BUG REPORT - Please do not use the keyword 'HAS' incomments!

Hi,
It seems that Forte is properly coded, and if you have comments in cursors,
please DO NOT USE the verb 'has', as it's interpreted as the END of the cursor.
Thanks,
J-Paul GABRIELLI

I wish you folks would get your software working on OSX and Linux so we didn't have to continue using Microsoft malware. I hate having to start up my VM to use Windows. I've pretty much shed myself of all need for Microsoft except for Oracle ME. The main reason I have moved from C# to Python and now to Java was to eliminate any ties to MS…..only to find that ME requires Windows. Oh, the irony!

Timed profiles and themes - N73

Does anybody know if there is such an application in existence for Timed profiles and Timed themes - just like the old Nokia phones had (Timed profiles anyway).
I think it would be a simple idea and very handy.
It seems Nokia are leaving out some of the small but useful little applications on the newer phones (eg. Auto key guard - I know it's available on Symbian website but it should be standard).
Any help greatly appreciated...
Regards...

I agree.. I used "Timed profiles" every single night so I couldnt desturbed until the time I set.. and I dont understand why nokia left out "auto keypad lock".. those to functions wouldnt be any work or cost at all to add to a phone like this.. but it is a great phone I think, and auto keypad lock is availeble for download

Strange behavior when Popup LOVs has read-only condition and Bug Report

Hi,
I observed an inconsistent behavior of Popup LOVs when the read-only condition is true. In that case the defined lov query is used to map the internal value of the page item to the display value defined in the lov query.
What is the reason for this behavior? Because if the Popup LOV is in "edit mode" the page item value is just displayed without looking up the display value. The display value is just used for the popup lov. Mapping the value is normally a behavior of the popup key lov.
-> The result is that different values are displayed if the page item is in edit or read-only mode. That's not really the behavior someone would expect.
BTW, there seems to be a bug with "Display Extra Values" set to "Yes" in the case read-only is true. If the lookup doesn't return a value it just displays [ ], but because the property is set to yes it should display the value. The Popup Key Lov has the same bug.
Thanks for bringing some light into that behavior
Patrick
Oracle APEX Essentials: http://essentials.oracleapex.info/
My Blog, APEX Builder Plugin, ApexLib Framework: http://www.oracleapex.info/

Patrick,
I've added your comments to a task already in our queue to examine all item types for correct behavior in read-only mode. I've noticed the quirks with display extra values also.
By the way, still interested in your thoughts re: Re: Bug Report: Images broke when using get_blob_file_src and not authentic .
Scott

FAQ: I found a bug. How do I write a useful bug report? Or send bug files to Adobe?

If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
Here is a list of the information we'll want for you to gather at a minimum:
Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
Provide concise, step-by-step details on how to reproduce the issue you are seeing.
Example:
Open an 8-bit, RGB image by selecting File>Open...
Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
Paint on the layer created in Step #2 using the default Brush tool
Choose File>Save For Web & Devices...
Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
Provide a description of the "Result" you are observing:
Example: "Result: Photoshop crashes"
If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
Provide a description of the "Expected Result":
Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
Dropbox
Adobe SendNow
YouSendIt
If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
Thanks,
The Photoshop Development Team

First thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.

How do i use the bug reporter in ios 8

im trying to use the bug reporter for the beta ios 8 but i dont get to input anything. Maybe i dont understand how this works,so can someone please explain.either way i figure i should say somthing now.
-the infinity blade 2 app does not load
-my settings button doesnt load all the time,
-most of the apps dont load the first time i open them,if i switch to another menu then back it will load.
-just now i shut off my phone, plugged it into the charger. My phone then turned itself back on and had me reactivate it.
-the "sample" button in the ibooks app doesnt seem to do anything either
-most of the time scrolling down on anything rather large(e.g.songs,articles,facebook) there is alot of skipping or lagging effect
-when on safari i turn my phone sidways and it totally messes up where things should go and it wont return i have to exit and close to fix
anyways id just thought id put that out there

You need to ask this question in the Developer's forum, which as a registered developer you have access to. If you're not a registered developer, then you have no business messing with iOS Beta software, & discussing such, even bug reporting, is PROHIBITED in this public forum.
But, as a registered developer, you already knew that, correct?

Bug report in small size website using servlet?

Can some one suggest me what is the best way to report bug in a website containing about 30-50 pages?
My bug report should use web based email service. It should have
- date of report
- email id
- report
and some kind of url or tag which should be automatically included in the email which will enable us to find out the particular page.
i was thing of making an UNIQUE bug report links in each web pages which upon clicking will through a particular url link to the servlet and the servlet will catch that and include in the email.
Is this possible? do you have better suggestion?
thank you.

The attached patch for db-4.7 makes two changes:
it allows enough for each bucket to have the configured number of threads, and
it initializes env->thr_nbuckets, which previously had not been initialized.
Please let us know how it works for you.
Regards,
Charles

I'd use Safari's bug report function instead of posting here, but...

...it crashes Safari. lol.
So here are my reports:
- If Google is set as the default search engine, setting the home page to www.google.com crashes the program.
- Bookmarks... seems like this topic has been covered well enough. I actually had no problems importing them from Firefox, but adding new ones crashes the program.
- And as mentioned, the bug report function crashes the program.
Bugs aside, I love it. Looking forward to future releases.
Homegrown PC, P4 1.8GHz. Windows XP Pro

...it crashes Safari. lol.
Haha! It's so Windows-alike!

Solaris 9 x86 bug report - el_GR.ISO8859-7 & CDE

I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
:0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
in /usr/dt/config/Xservers file, to start the X server.
Here is the $HOME_DIR/.dt/startlog file:
--- ??? 23 ??? 2003 12:10:51
--- /usr/dt/bin/Xsession starting...
--- starting /usr/openwin/bin/speckeysd
--- Xsession started by dtlogin
--- starting /usr/dt/bin/dtsession_res -load -system
--- sourcing /root/.dtprofile...
--- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
--- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
--- sourcing /usr/dt/config/Xsession.d/0020.dtims...
--- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
--- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
--- sourcing /usr/dt/config/Xsession.d/1000.solregis...
--- could not read /root/.profile
--- starting /usr/dt/bin/dthello &
--- starting /usr/dt/bin/dtsearchpath
--- starting /usr/dt/bin/dtappgather &
--- starting /usr/dt/bin/dsdm &
--- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
--- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
--- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
--- starting desktop on /dev/pts/3
Sun Microsystems Inc. SunOS 5.9 Generic_112234-03 November 2002
/usr/dt/bin/ttsession[337]: starting
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
Anyway, I hope this will help developers solve a problem -if it really exists-.
Angelos Vasilopoulos
Site Security Officer
[email protected]

I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
:0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
in /usr/dt/config/Xservers file, to start the X server.
Here is the $HOME_DIR/.dt/startlog file:
--- ??? 23 ??? 2003 12:10:51
--- /usr/dt/bin/Xsession starting...
--- starting /usr/openwin/bin/speckeysd
--- Xsession started by dtlogin
--- starting /usr/dt/bin/dtsession_res -load -system
--- sourcing /root/.dtprofile...
--- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
--- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
--- sourcing /usr/dt/config/Xsession.d/0020.dtims...
--- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
--- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
--- sourcing /usr/dt/config/Xsession.d/1000.solregis...
--- could not read /root/.profile
--- starting /usr/dt/bin/dthello &
--- starting /usr/dt/bin/dtsearchpath
--- starting /usr/dt/bin/dtappgather &
--- starting /usr/dt/bin/dsdm &
--- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
--- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
--- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
--- starting desktop on /dev/pts/3
Sun Microsystems Inc. SunOS 5.9 Generic_112234-03 November 2002
/usr/dt/bin/ttsession[337]: starting
X connection to :0.0 broken (explicit kill or server shutdown).
X connection to :0.0 broken (explicit kill or server shutdown).
I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
Anyway, I hope this will help developers solve a problem -if it really exists-.
Angelos Vasilopoulos
Site Security Officer
[email protected]

Internet Shortcuts saved on Desktop open new instance of Firefox 3.6 using clean profile--how can I make it open all shortcuts using current profile?

I rely heavily on Firefox's profiling ability to assist me in my web design projects. Lately, using Firefox 3.6, I have run into some problems with how it opens Internet Shortcuts that are saved locally (i.e.- shortcuts that reside on my Desktop). When I double-click on one of these shortcuts, a new instance of Firefox 3.6 is loaded with the saved website from the shortcut, but it's also initialized a fresh profile (i.e.- my bookmarks are gone, no add-ons, etc.--it's as if it uses some sort of "hidden" clean slate to load the shortcuts).
Is there any way to force Firefox to load all shortcuts into whatever profile I'm currently using at that given moment? I think the reason this has happened to begin with is because of the fact that I did some stuff to Internet Explorer awhile back that caused some problems with the Internet Shortcut associations and it all led to this eventuality.
I'm running Windows XP Pro and have the following profiles with my Firefox versions:
"C:\Program Files\Mozilla Firefox 3.6\firefox.exe" -no-remote -p Firefox3.6
"C:\Program Files\Mozilla Firefox N\firefox.exe" -no-remote -p FirefoxN
"C:\Program Files\Mozilla Firefox 3\firefox.exe" -no-remote -p Firefox3
"C:\Program Files\Mozilla Firefox 2\firefox.exe" --no-remote -p Firefox2
When I go into the "Folder Options / File Types" and double-click on "Internet Shortcut", I have the following within the "Advanced" settings (for the "open" action):
Action: open
Application used to perform action: rundll32.exe shdocvw.dll,OpenURL %l
"Use DDE" is checked...
"DDE Message" is blank...
"Application" is "shdocvw"...
"DDE Application Not Running" is blank...
"Topic" is "System"
Again, I think the root problem here is to do with the profiles and how they're handled when being opened with Firefox but I can't discern how to apply a fix with all this as I've obviously goobered this up a bit. I would really appreciate some professional knowledge on this and would prefer to avoid any reinstalls of anything if possible.

To save your sanity with this issue, my advice is to find a method other than desktop shortcuts to open those URL's.
1. Desktop shortcuts are going to open the Default Browser.
a. With multiple versions of Firefox installed that would be the last version that was installed when you have Firefox set as the Default Browser in Windows..
b. The Default Browser is going to use the Profile that shows a Default=1 in the profiles.ini file.
c. The Default Browser with the Default Profile isn't going to open if you have any other versions of Firefox already running, and the -no-remote command line parameter doesn't work in this situation.
2. The use of multiple Profiles and multiple versions isn't officially supported by Mozilla, and all the Bug reports that I have ever read about Requests for Enhancement have been WONTFIX'd by the developers. Basically we have to work with the limitations in Firefox and maybe improvise work arounds by ourselves. I've even seen a few threats about removing Profiles altogether in RFE Bug reports about Profiles.
I have had so many problems over the years with this Default Browser / Default Profile thing over the years that personally I find it easier to just set Opera as the Default Browser in Windows rather than have a Profile get b0rked because some other program I am using decides it wants to open the Default Browser unexpectedly. I don't use Opera for much, but it is a lot better than IE for purposes of being the Default Browser, considering the quirks I have seen with Firefox and multiple Profiles.
I have written a number of postings over at the MozillaZine Builds forum over the years about installing multiple versions of Firefox and using multiple Profiles. There's a lot of tips and comments provided by other multiple Profile users in one of those threads. Why don't you read those threads and see if it gives you some ideas or solutions I haven't thought of.
http://forums.mozillazine.org/viewtopic.php?f=23&t=1062975
http://forums.mozillazine.org/viewtopic.php?t=613873
http://forums.mozillazine.org/viewtopic.php?t=462431
The last thread listed has a lot of comments offered by other users, the first two threads were locked as a How-to sticky thread.

Link to Bug Report Forum on Forum help page is dangling...

The link Bug Reporting Forum (http://social.answers.microsoft.com/forums/en-us/reportabug/threads/) on page
Answers >
Forums Home
> Help (http://social.answers.microsoft.com/Forums/en-US/help) is dangling. Makes it a bit more complicated than necessary to find this forum...
Cheers, Michael

Hello Brent,
unluckily I think you misunderstood Michael original point.
Because some time passed, I too would like to report same issue again but let me explain and guide you (or others) how I too reached same sentence.
As of now even from your own 'Forums preferences' profile page you should be able to find on right side a
'Help' URL that leading to an intermediate page stating :
"The Frequently Asked Questions has Moved
The Forums help file has been moved to the
Community Wiki. Please update any bookmarks you may have."
Now a part from correcting that 'Help' URL once you or anyone reach 'Forums
Help (FAQ) - TechNet Articles - United States (English) - TechNet Wiki' you can find 'How
do I report issues with the Forums?' question, and then there's this other sentence :
"How do I report issues with the Forums?
You can report bugs, suggestions, and other issues for Forums, by performing one of the following actions:
Bug: If the issue seems like a bug in the forums code, go to the Bug Reporting Forum and report the bug
by using the template provided in the top forum thread.
But once anyone reach that Forum, now called 'Forums Issues (not product support)' there's no real forum bug reporting template in the top forum threads (as of now I only found 'Verify Your Account 15' and 'How to report
spam') and also to find this post thread I really had to search for "report a bug".
Regards
Rob

BUG REPORT: new 10g Driver throws SQLExcpetion

So far, i just replaced my old ORACLE JDBC driver jar file with a new version. Of course, i use the classes12.jar to be used by JDK 1.3. This worked for all the 9.xxx Drivers. Now, i tried to use the classes12.jar from the new "10g" Driver (10.1.0.2.0) but it doesn't work anymore. The first simple SELECT statement throws this error:
java.sql.SQLException: Typlänge größer als Höchstwert
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:161)
     at oracle.jdbc.driver.DatabaseError.check_error(DatabaseError.java:884)
     at oracle.jdbc.driver.T4CMAREngine.buffer2Value(T4CMAREngine.java:2230)
     at oracle.jdbc.driver.T4CMAREngine.unmarshalUB2(T4CMAREngine.java:1047)
     at oracle.jdbc.driver.T4CTTIdcb.receiveCommon(T4CTTIdcb.java:111)
     at oracle.jdbc.driver.T4CTTIdcb.receive(T4CTTIdcb.java:94)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:590)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:111)
     at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:350)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:895)
     at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:382)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:985)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
For the simple select statement:
select REF_CLASS, REF_CODE, REF_TEXT_DE from refset order by REF_CLASS,REF_CODE
so, nothing special. Going back to the last 9.x driver, it works again. Is the 10g driver knwon to be buggy?
Is there an official bug report web page on the ORACLE site (similar to the sun Java bug database)?

Hi all,
I am seeing following exception while using Oracle 10.2.0.3 base release with WebSphere 6.1.0.9.
------Start of DE processing------ = [2/3/08 12:59:14:698 CST] , key = java.sql.SQLException com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery 1315
Exception = java.sql.SQLException
Source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
probeid = 1315
Stack Dump = java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
     at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:801)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
     at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:841)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery(WSJdbcStatement.java:1381)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.executeQuery(WSJdbcStatement.java:754)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:418)
     at com.filenet.engine.context.ServerCallContext._getDBContext(ServerCallContext.java:611)
     at com.filenet.engine.context.ServerCallContext.getDBContextFromJNDIValues(ServerCallContext.java:783)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:380)
     at com.filenet.engine.gcd.GCDDBPersistence.<init>(GCDDBPersistence.java:135)
     at com.filenet.engine.gcd.GCDPersistence.getGCDPersistence(GCDPersistence.java:171)
     at com.filenet.engine.gcd.GCD.initialize(GCD.java:226)
     at com.filenet.engine.gcd.GCD.domainAvailable(GCD.java:183)
     at com.filenet.engine.gcd.GCD.isDomainAvailable(GCD.java:119)
     at com.filenet.engine.gcd.GCD.getContextInfo(GCD.java:142)
     at com.filenet.engine.init.StartupUtility.start(StartupUtility.java:136)
     at com.filenet.engine.init.StartupUtility.access$000(StartupUtility.java:39)
     at com.filenet.engine.init.StartupUtility$1.run(StartupUtility.java:68)
     at java.security.AccessController.doPrivileged(AccessController.java:274)
     at javax.security.auth.Subject.doAs(Subject.java:573)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:168)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:615)
     at com.filenet.apiimpl.util.J2EEUtilWS.doAs(J2EEUtilWS.java:207)
     at com.filenet.engine.context.CallState.doAsSystem(CallState.java:385)
     at com.filenet.engine.init.StartupUtility.startASSystem(StartupUtility.java:63)
     at com.filenet.engine.jca.impl.ConnectionFactoryImpl.start(ConnectionFactoryImpl.java:120)
     at engine.EngineInit._init(EngineInit.java:60)
     at engine.EngineInit.init(EngineInit.java:132)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:190)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:317)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1142)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:150)
     at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtensionProcessor.java:99)
     at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:787)
     at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:467)
     at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:304)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:285)
     at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:88)
     at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:655)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:608)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1312)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1129)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:814)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:965)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:2131)
     at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.java:341)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Dump of callerThis =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
==> Performing default dump from com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
This is a FFDC log generated for the Default Resource Adapter from source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
The exception caught = java.sql.SQLException: ORA-00942: table or view does not exist
SQL Error Code is 942 SQL State is = 42000
Operating System = Windows Server 2003 5.2 build 3790 Service Pack 2 x86
Classpath = C:\Program Files\IBM\WebSphere\AppServ\profiles\AppSrv02/properties;C:/Program Files/IBM/WebSphere/AppServ/properties;C:/Program Files/IBM/WebSphere/AppServ/lib/startup.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/bootstrap.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/j2ee.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/lmproxy.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/urlprotocols.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batchboot.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batch2.jar;C:/Program Files/IBM/WebSphere/AppServ/java/lib/tools.jar
Ext dirs = C:\Program Files\IBM\WebSphere\AppServ\java\jre\lib\ext
Other related data. If null, nothing was passed in =
null
The Objects' instance variables are printed below recursively 2 levels deep =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
+Data for directive [defaultadapter] obtained. =
==> Dump complete for com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
Any Ideas?
Thanks in advance.
Regards,
Rajan

Bug-Report: 3110c v7.21 using timed profiles freez...

Similar Messages

Maybe you are looking for