Bug Report: enum metadata containing 'true' and 'false' string values not displaying unless "goosed"

I have metadata whose value is 'true' but the corresponding enum title is not being displayed. If I set it explicitly to 'true' it will be displayed even though the value is the same as it was.
Likewise for 'false'.
I do not have this problem with enums that have any other string values i.e. 'yes' and 'no' function properly, but 'true' and 'false' do not.
Rob

Due to better understanding on my part, and the fixes in Beta 2.2, the
issues raised in this thread are put to rest.
Abe White wrote:
>
We'll investigate further. Stay tuned...
"David Ezzio" <[email protected]> wrote in message
news:[email protected]..
Abe,
Actually, it doesn't make sense. The first iteration shows
jdoPostLoad is called just prior to using the fields of Widget and Box.
After the commit, the instances are not cleared. So far, so good.
In the second iteration, we see that jdoPreClear is called, but
jdoPostLoad is not called. Yet the values are there for use during the
call to Widget.toString() and Box.toString() within the iteration. How
did that happen?
On the third iteration, now the value of name is null, but last we
looked it was available in the second iteration. Other than that, I
agree that the third iteration looks ok, since it is being cleared and
loaded prior to use. But in the jdoPreClear, the values should be there
since the values were used in the previous iteration and are not cleared
at transaction commit due to retainValues == true.
David
Abe White wrote:
David --
I believe the behavior you are seeing to be correct. Section 5.6.1 of
the
JDO spec outlines the behavior of persistent-nontransactional instancesused
with data store transactions. As you can see, persistentnon-transactional
instances are cleared when they enter a transaction; thus the calls to
jdoPreClear. When the default fetch group is loaded again (like whenyou
access the name of the widget) a call to jdoPostLoad is made.
You are seeing the name of one instance as 'null' in the third iterationof
your loop because the instance has been cleared in the second iteration,and
the jdoPreClear method is not modified by the enhancer (see section10.3).
Make sense?

Similar Messages

Sql to find out combination of true and false

Hi all,
Could any one provide the sql to find out combination of true and false . For eg: if I have 3 elements a , b c i would like to get below o/p
a b c
t t t
t t f
t f f
f f f
t f t
f f t
your reply is greatly appreated - thank you

Do you mean something like this (all permutations) ?
SQL> with t as (
2 select 't' bool from dual union all select 'f' from dual)
3 select a.bool a,b.bool b,c.bool c
4 from t a,t b,t c
5 /
A B C
t t t
t t f
t f t
t f f
f t t
f t f
f f t
f f fIf not, then you already got correct answers regarding boolean type in sql.
Best regards
Maxim

The case structure is not working well on comaring two strings using true or false string matching VI

I need an execution of commands after the reply from the instrument matches with the string I provided for that i used true or false string match VI on which the true string the matching command and the string is the reply from the instrument. And I put the further executionable commands in frame after frame of sequence loop in the true of the case structure. Amd finally I given all the output strings to the concatenate string to get all the replies as one loop. But when I execute the program the desired result is not available. So kindly please help me to overcome this problem.
Attachments:
basic serial with changes.vi ‏24 KB

You VI makes absolutely no sense and I would recommend you start with a few simple LabVIEW tutorials before trying to tackle this.
What is the point of the FOR loop with 1 iteration, it might as well not even be there, same difference.
Why is there an abort primitive in the FOR loop, this mean the program will unconditionally stop abort before any downstream code will ever go into action. The program will never get past the FOR loop.
You created a circular data dependency and LabVIEW inserted a feedback node automatically, making things even worse. (see also)
You need to learn about dataflow, execution order, and data dependency.
You need to learn about the various types of tunnels (plain, autoindexing, etc.)
There is a tremendous amount of duplicate code. Large code sections are the same, differeing only by a string. You should only have one copy of that code inside a proper state machine. Have a look at the design templates and examples that ship with LabVIEW.
LabVIEW Champion . Do more with less code and in less time .

Where do I find the TRUE or FALSE boolean value?

I'm doing a program that displays the operation of global variable. I'm suppose to put a TRUE or FALSE boolean value and I can't find it. Please help.

You can't find an indicator for the front panel or you can't find a Boolean constant to put on your diagram? You've got Boolean palettes for both front panel and diagram. Everything you need should be on one of the palettes. If that's not it, could you explain your problem in greater detail?

I installed the latest version of iTunes (10.6.3.25) on a new Windows 7 PC. I can see ahred libraries on Shared but can't import as the line containing the Settings and Import buttons does not display. Any suggestions?

To move the iTunes library to this new computer I switched on Home Sharing and can see the other libraries on my home network. If I select tracks from a Shared library I can't import them as the strip containing "Show: All Items" and the "Settings" and "Import" buttons, does not display at the bottom of the screen. Goes straight from the list of tracks to the strip with Playlist icons and xxxx items, tttttt total time, yyyy GB.
Any suggestions for making the Import button appear?

I hvae the EXACT same issue
I built a new computer which is EXTREMELY fast overclocked i7 ect and.. ITUNES DOESNT WORK
I click on itunes which ive uninstalled and reinstalled and reset the winsock AND seen if there were any errors AAAAAAND ive check the Hkey to make sure bonjur was the only one in there which it is and all that happens is my cpu goes to 25% and i cant do anything except go into the task manager and close it! ANYTHING with itunes (everything else is premium speed).
what do i do
windows 7 64 bit

COOIS- Report Grid Value not displaying

Hi Experts,
In COOIS report Prd Order item details , the grid values and stock category are not displaying values. we created the production order with AFS grid but while seeing report of item details the grid values and stock category are showing null values.
initial screen,
Report
but production order contains grid values.
any one guide me to resolve it.
Regards,
Thangam.P
Message was edited by: Thangam Perumal

Hi ,
my requirement is need to show the grid value and stock category of AFS production order based on item details. i think that alv reports is working based on view. it is possible to add custom view for that report? . if possible mean to any one guide me to fix the problem.
Regards,
Thangam.P

Product Revenue Bookings and Backlog Dashboard does not display any data

Product Revenue Bookings and Backlog Dashboard does not display any data even though the load completed successfully.
They are able to see just the parameters.
Not sure if the upgrade of the database from 9.2.0.6 to 10.2.0.3 is a factor.
What can I check?
Is there some table to verify that the data exists for display in the Product Revenue Bookings and Backlog Dashboard?
Screenshot is at:
https://gtcr.oracle.com/gtcr-dir/gtcr_5637/6415786.993/Product_Revenue_Bookings_Backlog_Dashboard.doc
Support suggested to create a new request set and run the initial load with load all summaries option; but there was no change in the Product Revenue Bookings and Backlog Dashboard.
Any ideas?

hi
We have faced the similar problem after the upgrade to 10G
What we did was
Ran the initial load of time dimension, Item setup request set, and the request set of all the dash board in the clear and initial load mode..
we were able to get the data once the clear and load is completed successfully
Regards
Ramesh Kumar S

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

When I click on an active link from another application, it opens the firefox application, but won't open open the page - it just opens Firefox or takes me to Firefox. No new tab or window is opened and the link is not displayed.

Firefox sent an email to me to confirm that I had asked the above question. The email had a link to click. When I clicked it from Firefox, nothing happened. Then I opened IE, signed into Comcast, opened the email, clicked the link, and it brought me here.

Some PDF files and other emails do not display the whole page. Is there a way to change that?

Some PDF files and other emails do not display the whole page. Is there a way to change that?

If an app does not behave as expected, try closing the app completely and reboot the iPad. It appears as though you have the original iPad. It helps if you list your iPad model and the iOS that you are running.
Tap the home button once. Then tap the home button twice and the recents tray will appear at the bottom of the screen. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner of the app that you want to close. Tap the home button twice.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?

Mac computers - FF 29.0 and 30.0 does not display the video layer in the Revolution Slider section of WordPress site. Why?
We prepared simple Word Press web site. We used a Revolution slider plugin with HTML5 video layer. It works properly on Chrome, Safari, older Mozilla FF.
But we had a problem on PC computers with FF 29.0 30.0 – after reinstall of browser everthing seems to be OK. The slider works. Unfortunately even the reinstallation on Mac computers does not help. There is no visible video on Mac FF 30.0.
We are looking for some information what we can do to solve this problem. Could you help?

Can you play the video on YouTube?
*http://www.youtube.com/watch?v=Ugh2YvHU7D0#t=58
Note that Mac lacks support to play MP4 files natively without using a Flash player.

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I do not manage to find the function to change a letter into exposing. I have MUSE DC 2014.2 and the menu does not display this possibility. I tried to import it IN design but that does not function either?

I'm not clear on exactly what it is you're asking, but if you're referring to changing opacity, you can change the opacity setting for the States of a menu item via the States panel and Control Strip.

Value not displaying in report whereas it returns in plsql developer

HI

Duplicate post.
value not displaying in report whereas it returns in plsql developer
value not displaying in report whereas it returns in plsql developer

When I burn a disc from a playlist in iTunes, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

When I burn a disc from a playlist in iTunes on my MacBook, the track names and artist info does not display on the disc when friends view/listen to it. This probably is an easy fix, but I need some advice.

No, this standard has been implemented for several decades.
How iTunes remembers audio CDs - http://support.apple.com/kb/TA27785
It is just conceivable you burned a CD that exactly matched one already in the Gracenote database. Gracenote uses track count and duration to decide what CD it is you have in a computer. If you have one that matches that it will label it. You could conceivably even have one that matches it that is not the correct one.
This script will only work on Macs:
http://dougscripts.com/itunes/scripts/ss.php?sp=cdtexttocdinfo - script to use CD-text file on CD to label CD in iTunes

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

USF on iTunes U collections such as Sustainability and iteach Initiative are not displaying new items even days after they are uploaded to the collections. The items show in the Preview of the collections but not Live view. not displaying

Greetings;
This seems to an ongoing issue (see related discussion link). We've been experiencing the same update lag since last Friday. The new additions to the Collection appear and are accessible in both the iPad and iPhone applications, but even though they additions appear in "Quick View", the material doesn't appear in the Collection itself. Apple is aware of the issue and is investigating. All the best...
Syd Rodocker
Tennessee State Department of Education
https://discussions.apple.com/message/15461971#15461971

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

I just upgraded to Mavericks and suddenly youtube does not display correctly although other sites work fine. I am using the newest MacBook Air. Any suggestions?

Hi ..
Open System Preferences > Flash Player then select the Advanced tab.
Click Delete All under Browsing Data and Settings
Back to Safari. Press Command + Option + E to empty the Safari cache.
Quit and relaunch Safari, try a video.

Bug Report: enum metadata containing 'true' and 'false' string values not displaying unless "goosed"

Similar Messages

Maybe you are looking for