Bug Report: Error when duplicating elements in symbol

I think I saw some posts on this issue.
Sequence:
element ellipse created on the stage symbol
png added to the stage symbol
attempt to duplicate ellipse by right-clicking and choosing duplicate
Error: "an error has occured. Save your work and restart Edge Animate
This error has occured several time in several compostion.
Restarting Edge did correct the issue this time but I had some occasions when the whole composition returned with nothing in it which is really frustrating. Other occasions reopened to the last saved not including the save done after the error.
REQUEST:
Autosave as with InDesign would be so great!!! 

Hi resdesign,
Is this the same issue reported here: http://forums.adobe.com/thread/1160457?tstart=0
If you don't have any transitions on the element you duplicate, please add more detail on how to reproduce this, or provide a sample file that shows the error.
Thanks,
Joe

Similar Messages

  • Error when activating element

    I'm getting an error  in my transport stating "Error when activating element xxxx". Is there a table I can enter the element number to get the info object? I need to know what the element is.
    Thanks!

    Hi
    The situation you have described is not really a problem. Usually it
    is sufficient if you retransport a corresponding transport request
    containing this problematic element. The new transport should return
    OK status.
    Please run in transaction SE38 of the target system the report
    CHECK_MISSING_ELEMENTS (type in 'M' for version). With these results,
    transport manually the missing objects to the target system and check
    if the issue persists.
    Also check the note 1030224.

  • ERROR WHEN READING ELEMENT IN SAPSCRIPT

    Hi All,
    In a custom PO form, I am getting error when reading element in WRITE_FORM.
    This element 'ITEM_MPN_LISTLINE' and 'ITEM_MPN_LISTHEADER' are in the standard form and I copied the same to custom form and added the relevant coding in the driver program. But in the WRITE_FORM, it always throw the error 1.
    which is after this statement in WRITE_FORM
    read table elements with key tdwindow = window
                            tdevent  = element
                           binary search.
    Sy-subrc is 1 since it is not able to find the element 'ITEM_MPN_LISTLINE' and 'ITEM_MPN_LISTHEADER'  from the table elements.
    Any help is appreciated
    Thanks

    I want the form to be printed with the values of elements mentioned above. There is no error coming up for the script. But the values of elements ITEM_MPNLISTLINE and ITEM_MPN_LISTHEADER are not getting displayed in the form output. Any help is really appreciated. This is very urgent
    Thanks
    Ricky

  • LV 8.0.1 Bug, no error when unflattening mis-matched data type

    When unflattening a string and wiring a "type" that does not match the original format of the data, sometimes I don't get an error and I get no data. I've attached a VI written in 8.0.1 that illustrates 2 examples of this. In LV 7.1 these cases did return an error, but not in 8.0.1. Can anyone offer some insight or global solution?
    Thanks, Chip
    Attachments:
    LV 8 Bug, no error trapped on mismatched type when unflattening string.vi ‏23 KB

    Good afternoon,
    Well, this certainly is an interesting situation.  In the example “Unflatten string returns data
    from previous iterations”, the second iteration of the for loop unflattens a
    string as an array of strings type, this is obviously a type mismatch so if any
    data is returned I wouldn’t expect it to be valid.  What is even more interesting, is that if you
    don’t use the auto indexing, but rather explicitly index the array there is no
    error, but the data returned is like it was in 7.x.  I tried to use the flatten function’s
    “convert 7.x data function with no luck in either case.  I filed a bug report on this issue (number
    3X0CBC3A), but it seems to me the only workaround for now is going to be just
    making sure the types match.  I know this
    is going to be inconvenient for you, and for that I apologize.
    Incidentally, in many cases I wouldn’t necessarily expect an
    error to be generated if the types don’t match. 
    This is because the flatten to string function takes your data and
    converts it to a string which is nothing more than a byte[ ] of data with some
    size information.  When you “unflatten”
    the function takes the string it is given, and attempts to reconstruct the data
    in the format that is specified by the “type” input.  If it can reconstruct the data from type,
    regardless of the data returned I wouldn’t expect it to generate an error.  Sometimes, however, an error can be detected
    – if you flatten a double-precision number and unflatten to a single precision
    number LabVIEW can detect that the incoming data represents something much
    larger than a single precision number.  I
    suppose that LabVIEW 7 did a better job checking the size of the sting before
    deciding whether or not to generate an error.
    Again, I apologize for the problems this may cause.  Please let me know if there is anything else
    I can help with.
    Travis M
    LabVIEW R&D
    National Instruments

  • Interactive report error when filter

    Hi,
    I'm new to Apex and get the following error when I create an interactive report:
    "Invalid set of rows requested, the source data of the report has been modified.
    reset pagination"
    This error occurs when I scroll through the pages of the report and get to say the third page of data. I then apply a filter to restrict the data returned to less than a page worth of data, click "Go" and get the error.
    I've searched the forum and understand that this is occurring as Apex is still trying to display 3 pages of data when there is only one page worth of data and I know that I somehow need to reset the pagination, but I cannot find a way to do this. I have tried creating a process to reset the pagination, but this does not seem to fire when the "Go" button is clicked on the interactive report search bar.
    I have tried to reproduce this in my online Apex workspace, but it works fine there. I think this is probably down to using version 4.0 online, but my company is still on version 3.1.0.00.32.
    Is this a bug in the version of Apex that I'm using or is there a way that I can reset the pagination on an interactive report (when the "go" button is clicked)?
    thanks
    Adrian

    The best thing is to run the page with debug and see if the reset pagination is firing or not. Its been a long time since I used 3.1.x but I think reset pagination 3.1 works.
    Maybe something to do with the condition on the reset pagination that prevents it from running? Make reset pagination 'unconditional' and see the result.
    Regards,

  • How to hide report errors when user input incorrect?

    I have a tabular report with output that's limited on date interval basis in the WHERE clause. So I have two date items that's used to set start and end dates accordingly. Both items have validations "Item specified is a valid date". How to hide error in report area when validation fires?
    screenshot http://ehype.com.ru/tmp/rep_error.jpg

    Have you tried putting a condition on the report region of type "No Inline Validation Errors Displayed"?
    Scott

  • PDF Report Error When Distribute the Output?

    REP-0069: Internal Error.
    REP-57054: In-process job terminated:Executed successfully but there were some errors when distribute the output.
    REP-50159: Executed successfully but there were some errors when distribute the output.
    Approximately 5000 Pages
    Distribute PDF File Approximately 1700 Files
    How i can resolve this issue?

    Based that you are in base release I will encourage you to upgrade to the latest patchset for 10gR2 (10.1.2.3) and then apply the recommended bundled patch on top of 10.1.2.3 as several issues have been fixed with
    those patches.
    Reference
    Oracle Reports - Recommended Patch Bundle on Top of 10.1.2.3 (Doc ID 1162562.1)
    Regards RZ

  • Financial Reporting Error when creating grid/connecting to database

    Hi,
    This is new installation of EMP 11.1.1.2 and we are having issues with FR studio. We can open the studio and create a new report, but when trying to insert a grid we get following error:
    "DatasourceIDLogin.LoadDatasourceNames Error: -2147467259 Error Loading DatasourceList to Repository" from which I cannot get out, I have to shut down FR Studio.
    The only entry in the host file on the client machine I have is for localhost. If I try to add FR server host I get following error:
    "You are not authorized to use this functionality. Contact your administrator"
    Any help i.e. if I need to perform any configuration tasks on the client machine, changes in host files, changes on servers, etc will be very appreciated.
    Thank you.

    Hi,
    Does this prob occur in specific environment or all the three?
    You need to make sure that your print server,web server and report server are configured properly.
    Try to ping each of them and if still the problem persists make an entry in your host file of these servers with their complete names.
    Thanks.

  • Report Error When Getting Report Result

    Hi,
    I am running a "SQL Query (PL/SQL function body returning SQL query)" report and one of the items is a LOV which has a long list. I get this error.
    report error:
    ORA-06502: PL/SQL: numeric or value error: character string buffer too small
    The query string to be returned is VARCHAR2(32767) and it seems like the LOV is too long.
    Any advice? Thanks.

    This normally occurs as per the Report category type.
    By default the report category type is set to "RPT0". Therefore, when the application is launched, the reporting category type is also sent as URL parameter to the backend system.
    Please check if you are using customized reporting category type.
    Please check Iview property defined in the portal. Check in the content admin under manager's role > iviews > HCM > LPA reporting > Check here for the scenario that you are using if this is the same.
    Thanks !!!

  • "shared resources error" when installing Elements 12.

    I'm running Win 7 Ultimate, I've tried both download methods, restated at least 3 times, ran as administrator.  I still get the same error.  Any ideas??

    It has been installed bedore and then it suddenly did not work anymore. That's why tried to install it again, but unfortunatly did not work
    Verstuurd vanaf mijn iPhone
    Op 25 jun. 2014 om 22:14 heeft "Barbara B." <[email protected]> het volgende geschreven:
    error codes when installing elements 12
    created by Barbara B. in Photoshop Elements - View the full discussion
    Did you try to install before without removing anything that did get installed from your applications folder before trying again? You don't have the installer files in the applications folder, do you?
    Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6497038#6497038
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
    Start a new discussion in Photoshop Elements by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • MSS Reports - Error when processing your request

    Hi Experts,
    We got the following error, while executing MSS reports. Would really appreciate kind guidance to reslove the issue.
    Error as below:
    Error when processing your request
    What has happened?
    The URL http://m2003075d.**********/sap/bc/gui/sap/its/HRWPC_FC_EXEC was not called due to an error.
    (Intentionally kept **** to kept confidentiality about the client)
    Note
    The following error text was processed in the system ECQ : Template interpretation cancelled, syntax error.
    The error occurred on the application server M2003075D_ECQ_00 and in the work process 0 .
    The termination type was: RABAX_STATE
    The ABAP call stack was:
    SYSTEM-EXIT of program SAPLSLVC_FULLSCREEN
    Function: REUSE_ALV_GRID_DISPLAY of program SAPLSLVC_FULLSCREEN
    Form: DISPLAY_LIST of program RPTQTA10
    END-OF-SELECTION of program RPTQTA10
    What can I do?
    If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system ECQ in transaction ST22.
    If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server M2003075D_ECQ_00 in transaction SM21.
    If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server M2003075D_ECQ_00 . In some situations, you may also need to analyze the trace files of other work processes.
    If you do not yet have a user ID, contact your system administrator.
    Error code: ICF-IE-http -c: 200 -u: MANAGER1 -l: E -s: ECQ -i: M2003075D_ECQ_00 -w: 0 -d: 20090710 -t: 160454 -v: RABAX_STATE -e: ITS_CANT_LOAD_INCLUDE
    HTTP 500 - Internal Server Error
    Your SAP Internet Communication Framework Team
    Thanks in advance,
    Aashish

    Hi,
    You need to Publish the services in a proper sequence, then only it will get activated.
    Also switch between SAP GUI for windows and SAP gui for HTML, because if you are accessing the system through network, problem may arise.
    Try switching between these launchpads, might help you.
    Publish the WEBGUI first, SHUFFLER then, and dont forget to publish completely, else it wont work.

  • Error when duplicating heirarchy of VI that uses NI_LVConfig.lvlib

    I am using labview 2010 SP1 and keep getting an invalid input error when trying to Save As-Duplicate Hierarchy any VI that contains any part of the NI_LVConfig.lvlib.  I have tried and found this problem using windows 7 and 8 and it seems to be independant of the save as location (C drive, network drive, desktop, etc.)
    Is there a known update or root cause for this?
    Attachments:
    Local_SealDMConfig_.ini ‏1 KB
    iniLib test.vi ‏11 KB

    I've done some more investigation on different computers, and have found that the error pops up only when i try to save As-duplicate heirarchy from a VI containing the NI_LVConfig.lvlib that resides on my office network server location to somewhere else.  If i copy the VI that i posted here to my harddrive then Save As-DupHeir it works.  I don't have another network to try to narrow it down much further as to what about my network or network path might be leading to the problem.  Here is a jpg of the error i get.

  • Bug Report: Lr3 does not report error when SDK version is too low.

    Lr3 should report an error if SDK is under-version'd. For example, I have this in one of my plugins:
        LrSdkVersion = 2.0,
        LrSdkMinimumVersion = 2.0, -- minimum SDK version required by this plugin.
    If I put Lr3.0 specific stuff in the plugin, Lr3 does not report an error, but it should - otherwise whats the point in specifying a version.
    I have to take the plugin into Lr2 to test for inadvertent Lr3 specific inclusion mistakes. Thank goodness I'm not worrying about Lr1...
    Rob

    Hi ,
    Could you please helping me out on finding the Patches (SP4,SP5)?
    ans also i have tested very oftenly, that my log in credentials are seems to be fine since its working for other reports too.
    With Hunting,
    MAK

  • XML parser error; when XPath elements starts with "_"

    Hi,
    I have a problem in extracting elements from XML which is starting with "_". please check the queries below executed on Oracle 10g.
    Query 1:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL;
    Error starting at line 1 in command:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/_B') FROM DUAL
    Error report:
    SQL Error: ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: '/A/_B'
    31011. 00000 - "XML parsing failed"
    *Cause:    XML parser returned an error while trying to parse the document.
    *Action:   Check if the document to be parsed is valid.
    Query 2:
    SELECT EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E') FROM DUAL;
    EXTRACTVALUE(XMLTYPE('<A><_B>1</_B><_C>2</_C><_D>3</_D><E>4</E></A>'),'/A/E')
    4
    Oracle version:
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    PL/SQL Release 10.2.0.1.0 - Production
    CORE     10.2.0.1.0     Production
    TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
    NLSRTL Version 10.2.0.1.0 - Production
    Please let me know if there is any workaround for this.*
    Thanks,
    Veerababu Kanumilli.

    Hi MichaelS,
    - I have executed the queries provided by you, but I am not able to get the result in 10g when I am trying to access elements with "_" in XPath.
    select * from v$version where rownum = 1;
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/_B') "_B" from dual;
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/E') "E" from dual;
    Output:
    BANNER
    Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Prod
    Error starting at line 4 in command:
    select extractvalue (xmltype ('&lt;A&gt;<_B>1</_B><_C>2</_C><_D>3</_D><E>4</E>&lt;/A&gt;'), '/A/_B') "_B" from dual
    Error report:
    SQL Error: ORA-31011: XML parsing failed
    ORA-19202: Error occurred in XML processing
    LPX-00601: Invalid token in: '/A/_B'
    31011. 00000 - "XML parsing failed"
    *Cause:    XML parser returned an error while trying to parse the document.
    *Action:   Check if the document to be parsed is valid.
    E
    4
    Thanks,
    Veerababu Kanumilli

  • Error when duplicating objects

    When ever I attempt to duplicate a selected object I get a warning dialog that says...
    An unexpected error has occurred.
    Please quit and reopen Keynote.
    This error occurs whether I am duplicaing an object on a slide using Command D or duplicating a slide using the right click > Duplicate contextual command.
    I am using version 5.3 (1170) of Keynote.
    So far this error is not fatal - it is not causing Keynote to crash. Though having to quite and restart means it may as well be. Also I can duplicate without this error using copy and paste - but this is an error with a very high annoyance factor.
    I am guessing (sigh) that this will eventually get attention via an update - but until then maybe if enough people click the "I have this question too" link under this post someone at Apple might see it earlier or prioritise the bug.

    Don't know if you made a mistake in the version, but please refer to here for best versions to be using: http://www.oracle.com/technology/products/bi/olap/collateral/olap_certification.html
    10.2.0.3 with OLAP patch or 10.2.0.4 code stream is best if on 10g.
    Thanks, Laura
    Edited by: Laura McKechnie on Dec 3, 2009 7:50 PM

Maybe you are looking for