Bug report - Escaping list targets
http://screencast.com/t/0WsRfR7nH192
Minor nit - With all the security related changes in APEX 4.1 and 4.2, the Builder itself has missed a few places to properly escape/unescape stuff. See above. The Edit (List) Region page (4000:4651) shows the target page links escaped.
Thanks
Christian - Thanks. Would this cover the situation I pointed out recently in Apex 4.2 - App name escaped ?
Similar Messages
-
Flash Professional is not on the bug report page list
https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
Flash professional is not on the list. Making bug reports a little difficult. If it has another name it is not one showen in the "About Flash" dialog box.it's listed as flash authoring.
web admins have already been contacted about fixing that (about 1 week ago). -
MacLoyal, that is my moniker! I am in a state of identity crisis because iPhoto is about to force me to break ranks and seek a place of sanity with a non-Apple photo system. I had to lose the iLife integration with dot mac. I do not want to take such a drastic measure and I truly cannot afford the added expense. I already have thousands of dollars sunk into Apple and all their goodies. My investment in time is something I dare not even try to calculate.
I regret every time I had a "do you want to submit a report" box pop up and cancelled it rather than submitting each and every one with frantic demands for help to correct the mess that iPhoto 5 has caused in my life.
I dare not edit any of the photos in my library. I don't even want to rotate them. Indeed, I dread opening the program! It hangs my laptop computer up indefinitely. The only way I have found to interrupt the hang time, because I cannot even get force quit to work, is to shut the lid and put it to sleep. Amazingly, when I open it again I am not in a suspended state. However, as I stated, I'm reluctant to actually do anything with the program besides, perhaps run the slide show, once I have the program open.
So my question is: How do I send a bug report when I haven't actually gotten to the point that the computer generates the bug message? That seems only to happen with an unexpected quit.
I've noticed that the Safari pull down menu always has a "Submit bug report" message listed, but iPhoto does not have that in the its menu panel. Can I submit a report on any topic on the Safari form or is that only going to make it to the Safari team at Apple? If I can use that form, is there a limit to how many complaints I can inundate them with? I am at my wits end. . .Of all the programs I've used of OSX IPhoto is the lamest. I really thought it should be better and every time I opened it up and used it I just couldn't get over how poorly it worked. I finally stopped using it altogether and just started using photoshops browser. Now photoshop has the bridge which seems like it would be great (haven't upgraded yet). Even with out the bugs the program just doesn't meet my simplest needs for photos. Good luck finding something that fits your needs and works well on your computer.
-
Bug report: Time stamp misalignment in recent list
Bug report: With the new compact design, go to recent pivot, tap on a conversation, press back button to go back to recent, notice the time stamps to the right of the list have moved even more right, with text being cut off the screen.
Using Lumia 1020 with Cyan and 8.1.1 DP.I figured this would be the best place to post it so that an Apple representative might see it.
Actually it's not as likely to be seen here since there are so many posts for any Apple rep to have to scan. The best way to report an issue to Apple is through the feedback pages or, if you're a member of Apple's developer program, through the bug reporter.
Regards. -
KSLD bug report: 32 bit causes target panic
Since the bug report link:
http://soldc.sun.com/developer/support/driver/tools/KSLD/bug-report.html
goes to a non existant email address, I thought I would post here.
Setup:
ksld 1.01
target and host booted with kernel/unix (32 bit)
/proto directory struct as described in starting ksld doc
debugging ramd driver example
ramd directory:
drwxr-xr-x 4 root other 512 Feb 11 12:40 .
drwxr-xr-x 10 root other 512 Feb 11 12:47 ..
drwxrwxrwx 2 bin bin 512 Feb 11 10:26 777
-rw-r--r-- 1 root other 341 Feb 11 11:31 Makefile
-rw-r--r-- 1 root other 1610 Apr 24 2001 README
-rw-r--r-- 1 root other 3588 Apr 18 2001 install
lrwxrwxrwx 1 root other 52 Feb 11 10:47 misc -> /export/home/ksld-space/proto/root_sparc/kernel/misc
-rw-r--r-- 1 root other 2523 Apr 18 2001 ntestram.c
-rw-r--r-- 1 root other 2542 Apr 18 2001 printinfo.c
lrwxrwxrwx 1 root other 6 Feb 11 10:46 proto -> /proto
-rw-r--r-- 1 root other 25713 Feb 11 11:29 ramd.c
-rw-r--r-- 1 root other 291 Apr 18 2001 ramd.conf
-rw-r--r-- 1 root other 210 Apr 18 2001 ramio.h
drwxrwxrwx 4 bin bin 512 Feb 11 19:51 sparc
-rw-r--r-- 1 root other 1785 Apr 18 2001 testram.c
lrwxrwxrwx 1 root other 67 Feb 11 10:48 unix.281 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/unix
HOST output
home1# ksld -t hardwire unix.281 99
Reading unix.281
KSLD v1.0 on sun4u [SunOS 5.8]
Current thread is 0x4001fe60
Reading krtld
Reading genunix
Reading platmod
Reading SUNW,UltraSPARC-II
Reading specfs
Reading TS
Reading TS_DPTBL
Reading ufs
Reading fssnap_if
Reading rpcmod
Reading ip
Reading rootnex
Reading options
Reading sad
Reading pseudo
Reading sd
Reading scsi
Reading glm
Reading pcipsy
Reading dada
Reading todmostek
Reading procfs
Reading sockfs
Reading clone
Reading ip6
Reading tcp
Reading md5
Reading tcp6
Reading udp
Reading udp6
Reading icmp
Reading icmp6
Reading arp
Reading timod
Reading conskbd
Reading wc
Reading ebus
Reading su
Reading kb
Reading ms
Reading consms
Reading se
Reading elfexec
Reading fifofs
Reading ldterm
Reading ttcompat
Reading zs
Reading ptsl
Reading ptc
Reading rts
Reading tl
Reading keysock
Reading sysmsg
Reading cn
Reading pipe
Reading mm
Reading hme
Reading ufs_log
Reading doorfs
Reading devinfo
Reading iwscn
Reading log
Reading sy
Reading fctl
ksld_dbx: can't stat /platform/sun4u/kernel/drv/afb -- No such file or directory
Reading afb
ksld_dbx: can't open /platform/sun4u/kernel/drv/afb -- No such file or directory
Reading fd
Reading busra
Reading cs
Reading winlock
Reading seg_drv
Reading usba
Reading kstat
Reading vol
Reading cpc
Reading tnf
Reading pcihp
Reading hpcsvc
Reading pcicfg
Reading nfssrv
Reading nfs
Reading rpcsec
Reading tlimod
Reading seg_mapdev
Reading inst_sync
Reading mntfs
Reading tmpfs
Reading klmmod
Reading autofs
Reading connld
Reading bootdev
Reading shmsys
Reading ipc
Reading ramd
Reading kaio
detected a multithreaded program
t@0 stopped in (unknown) at 0xedd000d8
0xedd000d8: ta %icc,%g0 + 125
(ksld_dbx) module -v ramd.o
Module: ramd.o
Language: ansic
Debugging information: read [stabs version: 3.1]
Source file: /opt/SUNWddk/src/drivers/ramd/ramd.c
Object file: /opt/SUNWddk/src/drivers/ramd/sparc/obj32/ramd.o
Loadobject: /usr/kernel/drv/ramd
(ksld_dbx) stop in ram_strategy
(2) stop in ram_strategy
poll in failed
can't set breakpoint
TARGET output:
connected
New connection: uid 0, fd 7
Begin traceback... sp = edd48290
Called from edd009dc, fp=edd47b41, args=34 edd308ee eddc40a8 34 edd042f0 edd042ec
Called from edd03624, fp=edd47c11, args=fff74000 edda51f0 102d087a ffffffff91d0207e 0 4
Called from edd0c0d0, fp=edd47cd1, args=102d087a 91d0207e ff1bd714102d087a 100 edd48608 27
Called from edd0a394, fp=edd47d81, args=eddb7788 8 eddc16a1 f0000 1 ffff
Called from edd176d4, fp=edd47e31, args=ffff eddb7788 0 1 0 eddc1690
Called from edd0e470, fp=edd47f41, args=edd49058 0 0 3c 0 edda69d8
Called from edd0e214, fp=edd47ff1, args=eddb6d58 eddc1690 edd49158 ffffffffffffffff 10000 edd483e0
Called from edd0e154, fp=edd480a1, args=eddc1640 edda3550 0 0 0 0
Called from edd071b4, fp=edd48121, args=0 0 0 0 0 0
Called from 0, fp=0, args=0 0 0 0 0 0
End traceback...
abort jump: trap 34 sp edd48290 pc edd042ec npc edd042f0
etext edd308ee estack edd489a0 edata edda2388 nofault edda2658
ksld_kadb[0]: (`o403P0801So6mLD42d8N_lK^bH00004)(`o403P0801So6mLD42d8N_lK^bH0000
panic[cpu0]/thread=4001fe60: BAD TRAP: type=34 rp=4002fbc0 addr=40030507 mmu_fsr=0
sched: alignment error:
addr=0x40030507
pid=0, pc=0xedd2ba78, sp=0x4002fc50, tstate=0x1404, context=0x0
g1-g7: 1000c000, edda1f78, edda1f78, 0, edda2658, 14aef0, 4001fe60
panic: entering debugger (continue to save dump)
Trap 7d
What is wrong with the setup,when a breakpoint would cause a traceback and panic on the target?One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
Sorry I can't be more definitive, but perhaps it will help.
Please post your conclusion, if you find it.
--Ian -
In my short acquaintance with xcelsius 2008 (fix pack 2 now) I have come across a number of bugs (not saying how big a number...) and come up with a number of new features suggestions which I consider crucial (sure, maybe noone else does) but I don't know of an offical repository for the above.
Is there an official bug reporting tool for xcelsius? Where do I go and whige about feature omissions or suggest new ones please?
THanks a lot
cWow, that's a real Christmas list. Some of the things you questioned others will have to answer as I've no experience with them, I don't use Pandora or have a Mac. I did check out the website you listed, the site loads just fine, the quicktime movies do not load nor run because you need the quicktime player and it's not compatible with the PB. I doubt if Apple is concerned about this :-).
As for deleting the music file, go to AppWorld and download the AIR Browser (or other file manger of your choice), it's free, it lets you do almost everything, similar to Windows Explorer, select the file and nuke it. On the languages, it does change the keyboard and if you press and hold a letter that needs a special character that special character will show up in blue, tap it to use it, EX, in Spanish the N will have the Tilde over it. I did have the clicking on the keyboard go away once, did a restart and it's worked ever since. As for removing an App, go to. I just deleted Hotmail and Yahoo mail and it's been about 15 minutes and they've not come back so not sure about slacker. After you deleted them did you click the little check mark on the left in the menu bar to get out of and save the deletion? Some of the other things you mention like Auto Capitalize the first letter needs to be fixed and I bet you see them fixed in V2. It ain't perfect but I love it still. You might get better responses to an issue by listing only one per post and putting it in the subject line, then someone who is familiar with that issue will be more likely to see it and respond. Also check the previous posts and knowledge base for answers to a lot of questions. Hope this helps -
KSLD bug report: 64 bit does not find target symbols
Since the bug report link:
http://soldc.sun.com/developer/support/driver/tools/KSLD/bug-report.html
goes to a non existant email address, I thought I would post here.
Setup:
ksld 1.01
target and host booted with kernel/sparcv9/unix (64 bit)
/proto directory struct as described in starting ksld doc
debugging ramd driver example
ramd directory:
drwxr-xr-x 4 root other 512 Feb 11 20:27 .
drwxr-xr-x 10 root other 512 Feb 11 12:47 ..
drwxrwxrwx 2 bin bin 512 Feb 11 10:26 777
-rw-r--r-- 1 root other 341 Feb 11 11:31 Makefile
-rw-r--r-- 1 root other 1610 Apr 24 2001 README
-rw-r--r-- 1 root other 3588 Apr 18 2001 install
lrwxrwxrwx 1 root other 52 Feb 11 10:47 misc -> /export/home/ksld-space/proto/root_sparc/kernel/misc
-rw-r--r-- 1 root other 2523 Apr 18 2001 ntestram.c
-rw-r--r-- 1 root other 2542 Apr 18 2001 printinfo.c
lrwxrwxrwx 1 root other 6 Feb 11 10:46 proto -> /proto
-rw-r--r-- 1 root other 25713 Feb 11 11:29 ramd.c
-rw-r--r-- 1 root other 291 Apr 18 2001 ramd.conf
-rw-r--r-- 1 root other 210 Apr 18 2001 ramio.h
drwxrwxrwx 3 bin bin 512 Feb 11 20:26 sparc
-rw-r--r-- 1 root other 1785 Apr 18 2001 testram.c
lrwxrwxrwx 1 root other 67 Feb 11 20:27 unix32.58 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/unix
lrwxrwxrwx 1 root other 75 Feb 11 20:27 unix64.58 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/sparcv9/unix
home1# ksld -t hardwire unix64.58 99
Reading unix64.58
KSLD v1.0 on sun4u [SunOS 5.8]
Current thread is 0x2a10001fd40
Reading krtld
detected a multithreaded program
t@0 stopped in (unknown) at 0xedd000d8
0x00000000edd000d8: ta %icc,%g0 + 125
(ksld_dbx) modules
No Info obj64/unix.o
No Info beep.o
No Info bootops.o
No Info cbe.o
No Info confunix.o
No Info cpc_subr.o
No Info cpu_states.o
No Info ddi_impl.o
No Info dmv.o
No Info dvma.o
No Info ecc.o
No Info fillsysinfo.o
No Info hardclk.o
No Info hat_sfmmu.o
No Info intr.o
No Info iommutsb.o
No Info ivintr.o
No Info mach_sfmmu.o
No Info mach_sysconfig.o
No Info machdep.o
No Info mem_cage.o
No Info mem_config.o
No Info mem_config_arch.o
No Info memlist_new.o
No Info memlist.o
No Info memscrub.o
No Info mlsetup.o
No Info mp_call.o
No Info mp_startup.o
No Info mp_states.o
No Info polled_io.o
No Info ppage.o
No Info prom_subr.o
No Info startup.o
No Info trap.o
No Info vm_machdep.o
No Info x_call.o
No Info v9dep.o
No Info xregs.o
No Info ddi_arch.o
No Info prmachdep.o
No Info prom_2path.o
No Info prom_boot.o
No Info prom_devname.o
No Info prom_devtype.o
No Info prom_enter.o
No Info prom_env.o
No Info prom_exit.o
No Info prom_fb.o
No Info prom_getchar.o
No Info prom_gettime.o
No Info prom_handler.o
No Info prom_inpath.o
No Info prom_interp.o
No Info prom_io.o
No Info prom_kbd.o
No Info prom_node.o
No Info prom_outpath.o
No Info prom_panic.o
No Info prom_path.o
No Info prom_phandle.o
No Info prom_printf.o
No Info prom_prop.o
No Info prom_putchar.o
No Info prom_reboot.o
No Info prom_stdin.o
No Info prom_stdout.o
No Info prom_string.o
No Info prom_test.o
No Info prom_trap.o
No Info prom_version.o
No Info prom_wrtestr.o
No Info prom_cpuctl.o
No Info prom_efcode.o
No Info prom_getunum.o
No Info prom_heartbeat.o
No Info prom_idprom.o
No Info prom_init.o
No Info prom_macaddr.o
No Info prom_mem.o
No Info prom_mmu.o
No Info prom_power_off.o
No Info prom_retain.o
No Info prom_serengeti.o
No Info prom_set_traptable.o
No Info prom_sparc.o
No Info prom_starcat.o
No Info prom_starfire.o
No Info prom_sunfire.o
No Info prom_vercheck.o
No Info prom_vername.o
No Info autoconf.o
No Info bp_map.o
No Info cpu.o
No Info cpu_intr.o
No Info cpupart.o
No Info disp.o
No Info kstat_fr.o
No Info mach_page.o
No Info mutex.o
No Info page_lock.o
No Info panic.o
No Info param.o
No Info putnext.o
No Info rwlock.o
No Info seg_kmem.o
No Info vm_page.o
No Info vers.o
(ksld_dbx) module -v ramd.o
Can't find module 'ramd.o'
(ksld_dbx) loadobjects
/opt/SUNWddk/src/drivers/ramd/unix64.58
(ksld_dbx)
Unable to find any symbols, except krtld which is in the same directory structure as the rest of the symbols.Are you sure that you started the Firefox 13 version and not the version from your Linux distribution?
If the other Firefox version is running then you usually start another instance (window) in the already running Firefox version.<br />
<br />
<pre><nowiki>
#!/bin/sh
cd path_to_firefox13
./firefox</nowiki></pre> -
Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlistlawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum. -
This is a bug report for Microst Remote Desktop
===================================================
## Summary
A keyboard layout is incorrect on the remote with Hungarian keyboard
## Version Information, I tested
* Client
* Case 1
* MacBook Pro with HU101 Keyboard
* Locale: Hungarian
* Mac OS X Maverics 10.9.2
* Microsoft Remote Desktop 8.0.6
* Remote
* Case 1
* Windows Server 2003 R2 (English)
* Case 2
* Windows Server 2008 R2 (English)
* Case 3
* Windows 8.1 (Hungarian)
## Detail of bug
When I connect to the listed remotes the client sets the keyboard layout to Latvian which is a completely different layout than Hungarian (not even close...).
- On Windows 8 if I set the language on the login screen it stays on that language after the login.
- On Windows Server 2003R2 and 2008R2 even if I set the language at login it will switch back to LV after the login.
## Attachments
Unfortunately cannot include my shots because I'm not allowed to do this...
## End of report
Please allow the users to set the correct "target" language on connection basis because the automatic method the app use to determine that is unreliable.Hi,
Thanks for the feedback.
I will forward this to the product team.
Thanks.
Jeremy Wu
TechNet Community Support -
Can someone give me an address where i can send bug reports? I mean email or specific web address.
Recently i updated my E70, and now i cannot listen music or watch movies.. the volume is so low that when someone speaks to me even if I'm wearing headphones (stereo from n70) i cannot hear the music. Not to mention playing movies - i have to be in bed - in COMPLETELY quiet enviorment to be able to understand what they are speaking. That was not a issue before the update, and I can say that I was really happy with the sound quality then (ok this can be a marketing move to sell your music phones, but is it necessary to cripple a already working phone?).
here is list of other bugs:
occasionally when i try to print large images and text, or press print preview i get out of memory errors.
if i set headers and footers to off and resize the margins of the document i still get "header and footer not in bounds" error when i try to print or preview
once in 30-40 times when i save word document in the native application the file is saved, but when i try to open it I get an error, when I transfer the file to the pc I cant open it there as well because it is corrupted - this is REALLY annoying because i use the phone to enter really important meeting notes, and or dictations at the university
there should be tool to switch to landscape mode like e60 one
it will be good if we can download additional writing languages to the phone - the language files are saved in the ram folder, and it will be really nice if we can add others to internal memory folder as well - I'm using Bulgarian version of the phone yet i don't even have Cyrillic ...
Nokia supports
Nokia-MIDlet-Original-Display-Size: 176,208
Nokia-MIDlet-Target-Display-Size: 352,416
which is used to change the resolution of java games and programs, but this has to be added to every single jar file - there should be a way (maybe in application manager) to set this setting to every program we want. And i think there should be a way to change the resolution of sis games and programs as well, i don't know how the resolution is realized in symbian but there should be a way to switch it.
there should be boost microphone in camera settings
ctrl+c, ctrl+v,ctrl+x,ctrl+b are working but ctrl+a doesn't select all
Please give me contact details to someone that can actually look into these bugs and suggestions.
Thanks
Anton BanchevLots of updates to Portal are being done as we speak...
This Bug Report page will be updated for "Creator 2" release value, very soon
Also the System Information:
Paste in the top contents of your ide.log file, located at <ide_userdir>/system/ide.log
will be updated to include $creator2_userdir/var/log/messages.log (for JSC2)
-Sakthi -
Bug Report :
Upgraded to Firefox v10. Holding CTRL+ [F4] too long after all tabs are closed causes error.
"Exc in ev handl: TypeError: this.oPlg.onTabClosed is not a function"What extensions do you have? (Go to Firefox > Customize > Add-ons to see or Help > Troubleshooting info for a copy-pasteable list)
-
Bug report, Beta 2.12 Standard Edition
Bug report: redundant, confusing, and apparently erroneous calls to
jdoPreClear
and jdoPostLoad. Note in output the null name in the third iteration.
Hi,
A lot of information being sent. Sorry, but I think you'll find it
helpful. I expected the exact same sequence of calls to jdoPreClear
and jdoPostLoad on the 2nd and third iteration. In fact, since,
retain values is true, and no changes are being made, I expected that
jdoPreClear and jdoPostLoad would not be called at all on the 2nd and
3rd iteration.
David Ezzio
Using 2.12 Beta, standard edition
Business method uses one PM. Configured to datastore transaction,
retainValues == true, non-TR == false, and non-TW == false.
The business methods open a transaction and leave it open.
The client calls commitTransaction() to close the open
transaction.
Two persistent objects, Widget and Box. Each implement
InstanceCallbacks and put out a message in jdoPreClear ("will be
made hollow") and in jdoPostLoad ("has been made persistent-clean").
The Widget has a reference to its Box. The number in parenthesis
is the sequence number obtained from the object ID.
Business methods implementation:
public ArrayList getWidgetsByName(String name)
Transaction trans = pm.currentTransaction();
if (!trans.isActive())
trans.begin();
Collection c = (Collection) widgetsByOneName.execute(name);
ArrayList aList = new ArrayList(c);
widgetsByOneName.close(c);
return aList;
public void commitTransaction()
Transaction trans = pm.currentTransaction();
if (trans.isActive())
trans.commit();
Output: from three loops that:
call findWidgetsByName("Maxi-Widget")
list the widgets returned
call commitTransaction()
finding Maxi-Widgets ...
Widget Maxi-Widget (650) has been made persistent-clean
Box Large (652) has been made persistent-clean
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget Maxi-Widget (709) has been made persistent-clean
Box Large (710) has been made persistent-clean
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget Maxi-Widget (708) has been made persistent-clean
Box Large (713) has been made persistent-clean
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget Maxi-Widget (700) has been made persistent-clean
Box Large (717) has been made persistent-clean
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget Maxi-Widget (707) has been made persistent-clean
Box Large (716) has been made persistent-clean
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
Finding them again
finding Maxi-Widgets ...
Widget Maxi-Widget (650) will be made hollow
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget Maxi-Widget (709) will be made hollow
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget Maxi-Widget (708) will be made hollow
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget Maxi-Widget (700) will be made hollow
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget Maxi-Widget (707) will be made hollow
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
Finding them yet again
finding Maxi-Widgets ...
Widget null (650) will be made hollow
Widget Maxi-Widget (650) has been made persistent-clean
Widget Maxi-Widget (650): Box Large (652) at location Top Shelf
Widget null (709) will be made hollow
Widget Maxi-Widget (709) has been made persistent-clean
Widget Maxi-Widget (709): Box Large (710) at location Middle Shelf
Widget null (708) will be made hollow
Widget Maxi-Widget (708) has been made persistent-clean
Widget Maxi-Widget (708): Box Large (713) at location Top Shelf
Widget null (700) will be made hollow
Widget Maxi-Widget (700) has been made persistent-clean
Widget Maxi-Widget (700): Box Large (717) at location Top Shelf
Widget null (707) will be made hollow
Widget Maxi-Widget (707) has been made persistent-clean
Widget Maxi-Widget (707): Box Large (716) at location Top Shelf
-- All done!Due to better understanding on my part, and the fixes in Beta 2.2, the
issues raised in this thread are put to rest.
Abe White wrote:
>
We'll investigate further. Stay tuned...
"David Ezzio" <[email protected]> wrote in message
news:[email protected]..
Abe,
Actually, it doesn't make sense. The first iteration shows
jdoPostLoad is called just prior to using the fields of Widget and Box.
After the commit, the instances are not cleared. So far, so good.
In the second iteration, we see that jdoPreClear is called, but
jdoPostLoad is not called. Yet the values are there for use during the
call to Widget.toString() and Box.toString() within the iteration. How
did that happen?
On the third iteration, now the value of name is null, but last we
looked it was available in the second iteration. Other than that, I
agree that the third iteration looks ok, since it is being cleared and
loaded prior to use. But in the jdoPreClear, the values should be there
since the values were used in the previous iteration and are not cleared
at transaction commit due to retainValues == true.
David
Abe White wrote:
David --
I believe the behavior you are seeing to be correct. Section 5.6.1 of
the
JDO spec outlines the behavior of persistent-nontransactional instancesused
with data store transactions. As you can see, persistentnon-transactional
instances are cleared when they enter a transaction; thus the calls to
jdoPreClear. When the default fetch group is loaded again (like whenyou
access the name of the widget) a call to jdoPostLoad is made.
You are seeing the name of one instance as 'null' in the third iterationof
your loop because the instance has been cleared in the second iteration,and
the jdoPreClear method is not modified by the enhancer (see section10.3).
Make sense? -
FAQ: I found a bug. How do I write a useful bug report? Or send bug files to Adobe?
If you think you've found a bug in Photoshop CS6, please post your findings here on the forums.
Here is a list of the information we'll want for you to gather at a minimum:
Clear and concise steps so that someone who isn't in front of your comptuer can reproduce the issue you are seeing
Include information on the operating system/version you are running. (e.g. "Mac OS 10.7.3" or "Win XP Service Pack 3")
Here are some more detailed instructions for writing a useful, complete bug report for us on the forums:
Provide a descriptive title that includes your OS information:Example: "Photoshop crashes when I save a JPEG file using the File>Save For Web & Devices... command (Mac OS 10.7.3)"
Provide concise, step-by-step details on how to reproduce the issue you are seeing.
Example:
Open an 8-bit, RGB image by selecting File>Open...
Create a new layer by clicking the "Create New Layer" button on the bottom of the Layers panel
Paint on the layer created in Step #2 using the default Brush tool
Choose File>Save For Web & Devices...
Make sure the optimized format is set to "JPEG" and set the Quality setting to "80"
Click the Save button at the bottom of the Save For Web & Devices dialog, choose the desktop as the location for saving the file
Provide a description of the "Result" you are observing:
Example: "Result: Photoshop crashes"
If there is an error dialog, please include the exact wording displayed in the dialog or provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
If the error is a visual defect, either in the user interface or the image itself, provide a screen shot or video of the entire screen so we can see the dialog as well as the state of the application - i.e. what panels are shown, the state of the Layers panel, etc.
Provide a description of the "Expected Result":
Example: "Expected Result: Photoshop to save JPEG file to the desktop, no crash"
In some cases this may be obvious (such as in the case of a crash) but in others, what you expect to happen may be different than what the application was designed to do. Please be as specific as possible.
Provide the crash log by submitting all crash reports, including your email address, for every single crash your encounter:
You may also include the contents of your crash log in your forum posts as well, but always submit them using the above instructions as well.
Crash logs are located on Macintosh here: Users/<your user name>/Library/Logs/CrashReporter
Provide your System Info from Photoshop: What's even more useful is if you can share your System Info from Photoshop as it contains all kinds of useful information (OS/version, graphics card, driver version, 3rd party plug-ins used, etc) that will help the team track down your issue.
On occasion, the Photoshop engineers may request that you provide problematic files in order to reproduce and debug your issue.
In these cases, please post the file somewhere using your own servers or one your favorite online document/distribution services and provide a URL/instructions to download the file:
Dropbox
Adobe SendNow
YouSendIt
If the file isn't something you can post publically, you can request that someone from the engineering team contact you to figure out a secure way to get the affected files.
Thanks,
The Photoshop Development TeamFirst thing would be to realise the exact error. Second would be to check your logs to see what you have installed/upgraded which might be causing this error. Third, google your error and see if matches turn up. Fourth, search in Arch bugtracker to see if a match exist. Else file a report.
-
Bug Report: DW CS5.5 Crashes Every Time On An Image Map
I am posting this in lieu of contacting Adobe support. I went to my account to send Adobe a bug report and was told I needed to contact support via phone. That's pretty crappy. As a licensed user who's owned it less than three months, there's no direct path to tell you guys that your software is broken?
Here's the deal: I am working on an HTML landing page with one image map attached to one image. Literally, every time I make a modification to the code near the image (tied to the image map) then click into the live preview window, Dreamweaver CS5.5 crashes like a 70-year old on a bar of soap on the floor of the shower. It crashes hard. My only relief is to save the file before clicking into the live preview window. That's my only workaround to the problem.
But I'm left amazed that I can crash it every single time over an image map, flicking from the code to the preview pane. You would think that at version 11.5, a minor thing like that wouldn't hemorrage the supposed creme de la creme of web design software.
Here's the code I'm editing that causes it to crash:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<?php
require_once("/var/www/html/c/index.php");
$recip_name = $subscriber['first_name'].' '.$subscriber['last_name'];
?>
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<link href="/c/print.css" type="text/css" rel="stylesheet" media="print">
<title>Membership Special - No Commitment</title>
</head>
<?php // Google Link Tracking Code ?>
<script type='text/javascript' src='/c/google-analytics-code.js'></script>
<?php // End Google Link Tracking Code ?>
<!-- Source File -->
<link rel="stylesheet" type="text/css" href="http://yui.yahooapis.com/2.9.0/build/reset/reset-min.css">
<style type="text/css">
body {font:normal 14px/1.25em Georgia, "Times New Roman", Times, serif;}
h1,h2,h3,h4,h5,h6 {font-weight:bold;color:#333333;}
h1 {font:normal 28px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
h2 {font:normal 24px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
h3 {font:normal 20px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
h4 {font:normal 16px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
h5 {font:normal 12px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
h6 {font:normal 8px/1.5em "Trebuchet MS", Arial, Helvetica, sans-serif;}
a, a:link, a:visited, a:active {color:#0055FF;}
a:hover {color: #002AFF;}
#wrapper {margin:0 auto;width:432px;}
#header, #footer {margin:20px auto;text-align:center;position:relative;}
#footer {margin:40px auto;}
#coupon {position:relative;}
#coupon, #coupon img {margin:0 auto;text-align:center;}
.personalization {position:absolute;width:100%;text-align:center;text-transform:uppercase;}
.printcoupon {text-transform:uppercase;}
</style>
<body>
<div id="wrapper">
<div id="header">
<h3 class="printcoupon"><a href="javascript:window.print();">Click here to print your coupon</a></h3>
</div>
<div id="coupon">
<img src="images/19415coupon-01.jpg" width="432" height="432" /> <!-- <div class="personalization" style="left:0;top:818px;"><h1><?php echo $recip_name; ?></h1></div> -->
<img src="images/19357coupon-02.jpg" width="550" height="602" usemap="#imagemap" class="dontprint"/>
</div>
<div id="footer">
<h3 class="printcoupon"><a href="javascript:window.print();">Click here to print your coupon</a></h3>
</div>
</div>
<map name="imagemap">
<area coords="29,69,521,197" shape="rect" href="javascript:window.print();">
<area coords="29,212,521,339" shape="rect" href="http://www.google.com" target="_blank" onClick="recordOutboundLink(this, 'Landing Page', 'http://www.google.com');return false;">
</map>
</body>
</html>Bug Report and Feature Request https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
-
Bug Report - Some items in your iTunes Library ... because the file could not be found.
10.6 and this is still this is a problem?!?!?!?!
Not like this is an obscure issue only affecting a few noobs. Google returns 11,200 results on this issue!t'
Can we PLEASE at least allow the list of broken files to be dumped as a text file so I can find them manually! guess not,
I'll just have to get out a pencil and write down 100 songs to spend my saturday looking up and fixing. Or I could let my wife purchase 100 songs she already has whenever this comes up...
What's really infurating is that non-technical wife thinks this means she must go to the iTunes store and buy them again. Is it just coincidence that this only happens to songs that we ripped from the CD with iTunes? Hmmmm?....
what follows is for the programmers, please make sure this get's to the development group.
iTunes is the only music library manager, Media player was not even activated.
iTunes is configured to "Keep folder organized", "Copy files to folder when adding"
this has been a recurring issue since iTunes 9.x for us
The issue is persisted accross system and library rebuilds.
some of the same songs recurr but most of the time the list differs.
Library survived transfer to new computer and back for a system rebuild (new hdd) w/o this issue.
I'm guessing 100 songs is an arbitrary limit for error reporting.
Songs seem to get lost for the following reasons.
Track number added to filename
Spelling of some tags like Album, Artist, Title differ in iTunes library and the file path !!!!
Only seems to happen to mp3 files.
My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Would love a bug number and feedback chanel on this.The missing file thing happens when files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files in a relatively sensible structure, then you should be able to use my FindTracks script to reconnect them to iTunes .
Although you say you haven't used Media Player it can be raised as a background process by visiting enabled web sites. Possibly worth you reviewing this post: Getting iTunes & Windows Media Player to play nicely
jerunamuck wrote:
...My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Unlike Windows Media player iTunes doesn't have a feature to automatically update tag data, although it will sometimes spot when a 3rd party program has (say during playback) and then update its own copy of the data. The iTunes (Music) Library xml file is provided for querying by third party software and is rewritten every time there is a change to the library, but is otherwise of no relevance to iTunes. The library is maintained in the iTunes Library.itl file. I suppose what could be happening is that iTunes issues a command to the file system to move a file based upon its tag, updates its knowledge of where the file is supposed to be, but the OS fails to move the file for some reason. Alternatively everything could go as planned, but iTunes could fail to get the updated copy of the library written out to disk so next time you start you get the previously stored locations.
I have ideas of my own about the best way to organise my media, but I'm quite familiar with the way iTunes does it. It might be interesting to see the details of one of the broken tracks, the path iTunes thinks it is at, and the actual path, in case there is anything that can be deduced.
Apple don't run an open bug tracking system so you won't be able to follow reports/progress based on a bug number. You can drop a line to iTunes Feedback or get a free Apple Developer account and submit a bug report report there.
tt2
Maybe you are looking for
-
need to update to OS 10.7.5 and the messge i get is format not recognized
-
Hello all! I have a N95 which came with a 2d code reader by default. The problem is that after reading a code, the only option avaiable is to open an URL. A 2d code can pass much more instructions to the phone, such as 'save as new contact', 'send a
-
Question about disabling the IP cache
Hi, There is TCL command for that. Check Pg 121 of UG835 - http://www.xilinx.com/support/documentation/sw_manuals/xilinx2015_1/ug835-vivado-tcl-commands.pdf You can use -disable_cache switch to disable the cache for that IP.
-
Unable to update latest adobe flash player keep getting a message process not elevated from the host
i cannot watch news or sports video clips . i keep getting told i need to download the latest adobe flash player. when i try to do so i click save file and then click run . after a few seconds i get a message from host which reads process not elevate
-
How to install Mavericks on MBR partition (or make GUID)
I have a mid 2012 MacBook Pro running OSX Mountain Lion, and on a separate partition, I have bootcamp running Windows 8. I went to install Mavericks today, and I was greeted with an error message saying that I could not install Mavericks on my Macint