BUG REPORT: iPad Safari glitch and Fedex' website problem? HELP!!!!

Okay, I've discovered a weird bug and I don't know how to fix it, but you should definitely check this one out so you don't get the same problem...
I recommend you DON'T try following this on your iPad, otherwise you'll also experience the error, and I haven't found a way to fix it yet.
Process:
On iPad Mail I received a message from Apple's store detailing my iPad hard case has shipped via Fedex. I tapped the tracking link inside to view the tracking information. Fedex' site launches in the iPad Safari app, the URL directs me to the usual shipping status page, but then a dialog box pops up saying www.fedex.com "Framework Not Found!" with an "OK" prompt button.
Problem:
The button cannot be tapped. The modal dialog box therefore refuses to disappear allowing access to any other part of the Safari app. In effect, Safari is now useless.
I can launch different URLs from Mail and the page in the background updates, but none of the interfacial buttons, swiping with fingers or any other means of using Safari now works. What I need is a way to force-quit Safari.
Anyone?

Results of Google search on force quit ipad app:
"Apps are software, too, and sometimes software gets stuck (just ask anyone who’s used a computer for more than a month). To make a cranky app shut down without having to restart the whole iPad, press and hold the Sleep/Wake button down until you see the red “power-off“ slider—but don’t slide this time. Instead, press and hold the Home button down until the app quits and you find yourself back on the Home screen. "

Similar Messages

Sending a bug report on the OS and a sleep mode problem.

I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
Any suggestions are welcome.
TIA,
Drake

[email protected]
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

9.0.3 "Bug" report regarding paths, compiling, and running

I don't know if this is a bug or some kind of strange feature but it caused me to lose about an hour and a half of work before I figured out what was going on.
BACKGROUND:
I have a project UVDebug.jpr. It's full pathname is :
C:\My Documents\OracleJDev\Visia\UVDebug\UVDebug.jpr
Now this project has one file in it: UVDebug.java, however, this java source code file doesn't live in a subfolder of the folder containing the project. Shouldn't be a problem. It's path is
C:\My Documents\OracleJDev\Visia\VisiaProject\src\debug\visia\UVDebug.java
As far as I know now, the files you add to a project can live anywhere.
The output path (where the class files get created/saved) IS a subfolder of the project folder. It's path is
C:\My Documents\OracleJDev\Visia\UVDebug\classes
THIS WORKS:
If I FIRST click the rebuild project button, the class gets created in the correct folder:
C:\My Documents\OracleJDev\Visia\UVDebug\classes\debug\visia\UVDebug.class
If I then click the red bug button to run the project in debug mode, it works fine.
THIS DOES NOT WORK, BUT IT SHOULD:
If I DO NOT first click the rebuild project button, but instead, just go directly to clicking the red bug button to run it, then it is supposed to compile the source into a class and then run the class. However, the class does not get created and when it goes to run, it throws a class not found exception.
If the source code UVDebug.java DOES live in a sub folder of the folder containing the project, then clicking the red bug button WILL compile it and run it. I.e. the source code lives in
C:\My Documents\OracleJDev\Visia\UVDebug instead of
C:\My Documents\OracleJDev\Visia\VisiaProject\src\debug\visia
However if the source code does not live in a subfolder of the folder containing the project, you must first compile the project as a separate step before you click the red bug button to run it.
I don't know why the situation that didn't work didn't work -- it should have worked as far as I understand. Am I wrong here? Do all source code files and output class files have to be in subfolders of the project if you want to click only red bug instead of rebuild all and red bug?
Mark Hayworth
Cincinnati Ohio

I really don't know exactly what happened as what you have described should all work.
Try those following steps:
- Completely clean out your output path
including any .cdi files you might have
at the root of your output path
- Go back in jdev and make sure the runner
option is to make the application before
running
- Run (and/or) debug and it should work, does it?
Michel

Bug report: 1.6.0u10 and 11 silent uninstalls

Unlike 1.6.0 u7 and before, u10 and now u11 have a complete inability to unload any portion of java currently in use during a silent uninstall. This includes the quickstart service (jqs.exe), which is loaded when windows starts even before a user logs in.
This behavior makes updating to newer versions an absolute nightmare for system administrators.
Please fix this.
Thanks.

This has been reported numerous times in these forums. Some rapel so reported that iOS 6.1 corrected the problem. Others were not so fortunately it seems.
Most users have resolved the issue with the calendar by not having any all day events scheduled for April 1. If you have an all day event scheduled that day change it to a shorter duration. Also delete or remove any all day holidays or other entries acquired through a shared calendar.
Also keep in mind that everyone here is a user. This is a user to user forum. No one here is a representative or employee of Apple.

HT4972 Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help

Can I upgrade my iPad 1 to the ios5, and can I upgrade my snowleapord to mountain lion on my Mac book pro so that I can icloud my iPad, Mac book and iPhone 4s.pls help

Can I upgrade my iPad 1 to the ios5,
Yes.
... and can I upgrade my snowleapord to mountain lion on my Mac book pro
Maybe.
Read here for Mountain Lion's system requirements: http://support.apple.com/kb/HT5444

Itunes and Mac Pro Problem -- Help Please

Having a really strange problem and could use some help.
I've got a Mac Pro with my wife's Ipod attached. Updating songs on the Ipod has become very, very slow. Literally, it's taking hours to move over a couple of albums.
Just out of curiousity, I hooked it up to a Macbook Pro in the house and everything was just fine. Tried reinstalling itunes on the Mac Pro and it didn't do it the trick.
All machines are intel based. Other peripherals are working fine.
Any suggestions? Thanks.

slow iPod report - MacFixit
iPod Update 2004-07-15 (#4): Slow transfers after update, solutions; Another fix for mounting problems
Why reformat iPod in Disk Utility
iPod Discussions
Mac Pro 2GHz 4GB 10K Raptor 23" Cinema Mac OS X (10.4.8) WD RE RAID DW 4.0 APC RS1500 Vista

I got render and RAM preview problems. help?

i got render and RAM preview problems with after effects! please help me
when i started on a project earlier today the RAM preview was failing and it stoped making a preview after about a second, when i hit the RAM preview buttom again it continued to load and stoped again after a half second, and it continued to do that till it wasn't loading at all, just playing the same thing up even doe it haden't loaded the whole composition! BUT if i moved the (thing you see where you are on the timeline in need of a better name) it started loading a little more and then it stoped again.. so after alot of problems and moving i managed to make a RAM preview of the whole composition..
now the real problem: when i was done with my project and i was going to reender i did like this: i added my composition to the render queue, chosed my render settings and started to render, after exactly 37 frames it stoped and no window or anything poped up, the only thing that was telling me something was wrong was the render status, and it said: ''failed at 0;00;00;37'' that's not even a second! and BTW when i render after effects only uses 12% of my 6GB RAM memory.. i dont know what to do! i've tried other render settings but the same thing happens! can anyone help me?
BTW i'm swedish and only 14 so i might misspelled something..

Start here and make sure that you understand how RAM preview is supposed to work first:
http://forums.adobe.com/thread/424030
What version of After Effects? Have you installed the recent updates? What operating system? What kind(s) of source footage? Has this ever worked before? What other software are you running? Do you have any third-party effects or codecs installed? Are you rendering with OpenGL?
What are your Memory & Multiprocessing settings? Are you using Render Multiple Frames Simultaneously multiprocessing?

IPad Safari slow and freezing

My iPad constantly freezes on sites like eBay - will not play cNet video etc. What's up? we have no flash, and the alternative doesn't work either????
Please don't tell me to disable javascript, eBAy is useless with out it, and OS X is meant to support it.

It isnt a local network problem. I have used it on several networks, the same issue occurs. This is a wide spread issue if you look at these forums. I just went back to the ipad after leaving the iphone over a year ago, and the same issues dont seem to have been solved, just ignored by the user base.
I saw one guy suggest that you just avoid sites that make it crash and send a mail to the website telling them to correct the error if they want ipad users. That has to be the most arrogant and stupid comment I have ever read. Yes, eBay will change their site forthe hundreds of millions of users on browsers that work so that Safari on the ipad is useable. Jesus. Talk about the blinkers on.
Internet in my hand? I hope someone else comes out with a tablet soon, I will be jumping ship. I like the form factor, but Safari and the lack of flash *****. Hurry up HP.
Irony is I cant even use my bloody iPad to list it on eBay. Its a good device, but far too many flaws.

Bug Report: Static LOV's and PDF Printing with Tabular Forms

I have a tabular form, which acts as an editable report. Some columns are 'Standard Report Column' and some are Select Lists, using Static LOV's with the contents of
Yes;Y,No;NThe purpose of the page is to allow users to edit yes/no attributes of a row. Then, they can print the report.
To make the current sort of the report reflect what is being printed to PDF, I've used a Report Layout associated with the report region, as oposed to a report query. A report query in this case would not reflect the sort of the report (all columns are sortable asc/desc).
Anyway, I link my report with the layout created, and go to run it. I get this message.
ORA-06550: line 1, column 50: PLS-00103: Encountered the symbol "," when expecting one of the following: := . ( @ % ; The symbol ":= was inserted before "," to continue.
     Error      ERR-1000 Unable to determine LOV from "declare function x return varchar2 is begin Yes;Y,No;N return null; end; begin wwv_flow_utilities.g_query := x; end;".
OK
report error:
ORA-20001: Error fetching column value: ORA-01403: no data foundI'm guessing the product is trying to take my static LOV and place it in a function to be able to generate which value is being displayed as text, from the select lists. However, it doesn't work.
I've been able to get around it - by adding a YES_NO domain to my domain_codes table (a table which associates abreviations with full meanings), I can set by select lists to be query based select lists using the SQL select code_meaning, code from domain_codes where domain = 'YES_NO_CODE'. This still allows the user to dropdown Yes/No fields, and the PDF printing doesn't break.
It is just me, or can't the PDF printing handle static LOV's in tabular forms/reports?

Hi Patrick.
I've tried STATIC:Yes;Y,No;Nwhile stating it is a Select List (static LOV). The values that are rendered on the page are
[STATIC:Yes]
[No        ]
----------I tried the same thing with STATIC2 instead of STATIC, and the same thing happened.
It also broke if I tried STATIC or STATIC2 under Select List (query based LOV). This is within a report where there is no hyperlink to say 'Create/Edit static list' or 'Create Dynamic List', as there is under select list items.
However, I am finding that for some reason, the values being sent to the PDF are not the values in the database (Y/N), but the showing values (Yes/No). This happens when I use the domain_code select query as the query based LOV.
Furthermore, I cannot get any columns not rendering on the page to be generated in the PDF. I have a column that groups items depending on values, and I want this grouping to display in the PDF instead on the original value, ideally.
Cheers,
K.

My friend signed into gmail on my iPad safari browser and it kept asking him if he wanted to increase storage capacity size.

My friend signed into their gmail account on my iPad and asked if he would like to increase storage capacity. He clicked no but then it signed him out.
I know this happened once before but he was still able to sign into gmail. He tried again but it still did the same thing.
Is there a way to get around this?

You need to return it to the seller and get your money back. You cannot reset or use the device with another AppleID installed unless you know the password for that ID.
If the device has been jailbroken, no one on here can give you any further help...the Terms of Use prohibit us from doing so.

My ipad has glitched and i cant get it back! ive already tried turning it off and talking to siri!

help please!

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
 Cheers, Tom

After update iPod safari won't load website anymore. help?

After I recently updated my iPod(2g) some websites that I could visit on safari before, now only load halfway if that makes sense. Then the screen freezed and I'm back to homepage. What do I do?

Try resetting your iPod:
Reset iPod touch: Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears.

I get message on my IPAD, "Safari cannot download FOXFIRE.". Help!

Simple. How do I download FIREFOX on to my IPAD? I have preloaded SAFARI. I get message that I cannot download the free FIREFOX browser using SAFARI. What shall I do?

Hey Cadburycircle,
Unfortunately there is no true version of Firefox for IOS devices. They do have a very slick app called Firefox Home that is available in the iTunes store. It works similar to Firefox Sync and allows you to see all the open tabs and bookmarks on your computer. You should take a look at [[What is Firefox Home]] for more information.
Hopefully this helps!

Following iOS 6 update on my iPad Safari is experiencing web access problems

Following the iOS 6 update on both my iPad and iPad2 I am having problems accessing the web with Safari. In order to get Safari to work I must clear the Cookies and switch browsers from Google to Yahoo and after I exit Safari and return I must switch the browsers again back to Google. This was not an issue prior to the iOS 6 update. Is there a fix?

I called The New Yorker (I think it was Fri the 8th or Saturday the 9th) about this same issue.
I was told there was an issue with the 6.1 update where the Adobe software (which produces all the CondeNaste mags) causes a "loop" in iOS when not connected to the internet. Supposedly they will have the problem fixed in a couple of days.
Meanwhile quite annoying if you have only a wifi iPad.

SAFARI crashed and now strange problems

When Safari crashed all the topics in the "collections" bar that I had deleted returned. They also had all the websites that were listed originaly, and I had deleted, back in addition to the ones I had added. The bar on the bottom of the page (forget what it's called) Is also gone. Don't know where it went or how to get it back.
imac g5 Mac OS X (10.4.8)

Hi Captfantastic, welcome to Apple discussions.
When Safari crashed all the topics in the "collections" bar that I had deleted returned. They also had all the websites that were listed originaly, and I had deleted, back in addition to the ones I had added.
Do you mean your deleted bookmarks are back? Hmm not sure what would cause that, did you remove any files? Any more info it may help, or perhaps some ones else knows why & will chime in.
Try this, Quit Safari, go to your username Home~/Library/Preferences/find the file com.apple.Safari.plist, move that to the trash..
Do not empty the trash if it doesn't help you can put the file back restoring you preferences overwriting the newly created one.
The bar on the bottom of the page (forget what it's called) Is also gone. Don't know where it went or how to get it back.
That's the Status bar, on the Safari menu bar, under "View" click show Status bar.
Hope this helps some. Let us know.
Eme'~[)

BUG REPORT: iPad Safari glitch and Fedex' website problem? HELP!!!!

Similar Messages

Maybe you are looking for