BUG REPORT: Messages often not visible on Galaxy S6 / Skype v5.6.0.12393/534

Since a recent Skype update (within last couple of weeks, so perhaps since release of 5.6) the messages are randomly not showing up during an active Skype call. This can also change during a call so that first some messages are showing up (the "blue bubble" over the video, and also on the message list), but then then they stop showing up (no "blue bubble", and the message is not visible on the message list). To see a newly arrived message that did not get displayed, I can scroll to the top of the message buffer so that the previous entries get loaded in. Now when I scroll back to the bottom, the latest message can be seen. This is obviously not very convenient, especially that on every message view the list to scroll to the top gets longer and longer as more previous messages get loaded in. The problem appears to be present on Galaxy S5 on the latest Skype as well, so it is likely not a model specific but a platform specific issue. This makes for a terrible user experience; please try to fix this as soon as [humanly] possible. Thank you!

Similar Messages

Report messages are not visible

when i click on message reports in Operations tab. its not dipaying the report message. Instead it giving meassage like
"Provider Not Available :JMS Reporting Provider is not deployed, or it is not active ".
What i have to do in order to see report messages.

It should be running by default. Is this your own local environment?
You can check the deployment in WLS console. Click Deployments on the left and find "JMS Reporting Provider". Make sure that it is Active and if not, try to start it.
If it is not there at all, try to deploy it from BEA_HOME\weblogic92\servicebus\lib\common (remember to start it).
Hopefully that is all you will need to deploy.

Reporting Flag is not visible in the manage screen

Hi BI Experts, Good morning.
We load the inventory data daily in the night time which is delta load.
5 days back, we got 0 records and the request is in red.Then i rerun the infopackage manually and got the total records in to the cube.
From that day onwards its running successfully.
Yesterday i deleted the bad request from infocube.
But the Reporting flag is not visible.
Today i didnot get the records.
Please can anyone tell me the process.
Thanks in advance.
Regards
Anjali

Hi Nagesh,
Still i am not getting reporting flag.
I tried what did u say.
And today i did not get the records. Infopackages didnot run. It shows in red.
I tried to run it manually but it gives error.
The error message is:
Short text
    An exception occurred that was not caught.
What happened?
    The exception 'CX_RSR_X_MESSAGE' was raised, but it was not caught anywhere
     along
    the call hierarchy.
    Since exceptions represent error situations and this error was not
    adequately responded to, the running ABAP program 'SAPLRRMS' has to be
    terminated.
Please give me the reply.
Thanks in advance
Regards
Anjali

Message processing not visible in RWB Message monitoring

Hi Experts,
There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
Messages are visible in RWB Message monitoring.
Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
Thanks in Advacne,
Seshu.K

There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
Check if you have chosen the Status filter as ALL and not "Error".
If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

Why my account mood message is not visible ?

hello all,
I just want to know why my id mood message is not visible ? basically i have 2 accounts
so just i added myself in one of the accounts and also then for testing i created 3rd account but in all 3 accounts i am unable to read mood messages on homepage n also when i click on profile i see offline mark instead of mood message why is it so ? can anybody help me ?

Hi,
I have same problem! Do you find solutiun?
Regards,
Ümit

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

I have updated iOS 6 in my iPhone 4S and it went perfectly fine. Just after that when I opened the message app I found that the sms body of system generated messages was not visible after tapping on them.

The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
You're on your own. Good luck.

Flagging messages as "Not Visible"

Hi All,
When monitoring JMS destinations, you can see messsages waiting for delivery. You can even take a look at the message content. In the "WebLogic Advanced Admin" course, they say "Developer can flag sensitive messages as not visible". Can you please provide a little code sample explaining how it's done?
Thanks

I think all you may need to do is setup general "browse" restrictions on the queue itself. It may also be possible to set restrictive security permissions on the specific mbean calls that the console uses to view the messages. I've appended some notes that might help. While these notes are focused more on reducing restrictions rather than increasing them, I assume the general steps apply either way.
HTH,
Tom
JMX (mbean/console) Security
Limiting Access to Monitoring Beans
Message Management (JMSDestinationRuntimeMBean and JMSDurableSubscriberRuntimeMBean)
By default, only an administrator can view messages and their contents on the console (because the console uses mbean invocation APIs to view the messages, which require admin privileges).
The security settings of a protected destination (one with a role requirement for browse, send, or receive) also apply. This means that one would need both the admin role, plus the role configured for the destination. The following is a list of operations that extra security checking is performed at the JMS layer besides necessary MBean level security checking.
getMessage/getMessages: Browse permission
moveMessages (from one destination to another): Browse and Receive permission
deleteMessages: Receive permission
ImportMessages: Send permission
If you need finer grained security for queue message management (but not topics), then one option is use a tool that uses standard javax.jms API calls to view messages instead of mbean APIs -- in which case security checks are based on the arbitrary required roles that you've (optionally) configured on the destinations. One such tool might be "HermesJMS".
Another option is to lower the security requirements on the JMSDestinationRuntime mbean. Be careful, because the message management functions can not only simply view the messages, they also may be able to delete or move messages. Steps:
1. In the left pane, select Security Realm.
2. Select myrealm.
3. In Configuration tab, check Use Authorization Providers to Protect JMX Access, click save and then activate changes.
4. Restart the server.
5. In the left pane, select Security Realm.
6. Select myrealm.
7. Go to Users and Groups.
8. In users, create a new user say queueuser, add it to group Monitors
9. Adding it to group Monitors:
a. Select myrealm.
b. Select Users and Groups.
c. Click on user name, in right pane select Groups.
d. From Parent Groups, select monitors, click arrow pointing right side.
10. Go to Roles and Policies - > Realm Policies
11. In Policy table, select JMX Policy Editor.
12. Select Global Scope, click next.
13. From MBean Types, select weblogic.management.runtime
14. Select JMSDestinationRuntimeMBean click next.
15. In Attributes and Operations, select Operations: Permission to Invoke.
16. Click on Create Policy button and save
17. Click on Add Condition, Select Group in Predicate List, click next, type Monitors, say add. Click Finish.

[SOLVED] Reports 6i - Anchors Not Visible on Layout

I am using Reports 6i, and I have two frames anchored together, but the anchor is not visible on the layout. If I randomly click with the mouse in the area I know it's in, I can find it, but other than that it is invisible. Even when it is selected, only the little squares where the anchor touches the 2 frames are visible.
I did not have this issue when I was using Reports 2.5. Any ideas on this?
Thanks in advance,
Kurz
Message was edited by:
Kurzweil4

together, but the anchor is not visible on theUsually it doesn't happen like this. Are frames too close to each other? Close the report builder and re-open again and see if anchor shows up.
And also create a new dummy report (don't need to create a query). On layout, add two frames and anchored together. See if it shows up.

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Document message bar not visible when participating in Shared Review

Hi,
I have initiated a Shared Review using Acrobat Pro 8
Immediately after I finished sending out the notification to other reviewers, the _Review.pdf version of the document is opened for me and the Document Message bar is visible. Therefore I have the option to check for new comments, publish comments.
My colleagues however, when they open the pdf file attachment from their email notification they get the message: "This document has been sent by a user of Acrobat 8.0 Professional for your review. To participate in this review Acrobat 8.0 standard or professional, or later, is required" Pressing OK on that message box opens up the PDF file to be reviewed however the Document Message bar is not visible (there is no Document Message bar icon on the left pane either.). Therefore my colleagues cannot publish their comments.
I also encountered the same issue. After I close my PDF and re-open it, I cannot see the Document Message bar, eventhough I can still see my Review Tracker and the document still listed there.
So, what did I do wrong? I started the shared review by following the prompts:
1. Comments > Send for Shared Review
2. Enable reviewers with Reader to participate
3. Select a network drive to store the shared comments
4. Select the document to be reviewed
5. I've experiment with all the different send notifications options
6. I specified the email address of the reviewers and sent the invite
Thanks a lot for the help..

Does this happen with one particular document or with all your reviews?

Mail messages are not visible

When I open a message in apple mail, the content does not show up. Just the to, From, Title etc. The body of the message is blank. I can sometimes quit mail and relaunch it and see the messages, but not always. It is not consistent with the same message. In other words some messages fail to be visible and then will be fine as others fail. In other words it is not link to any particular mail message, sender or mailbox.
I can see the first part of message in preview column, but opening the mail comes up white. Sometimes when I forward or reply I can see the string and have done that to read message.
Most of my business is done via email so an assistance would be helpful and appreciated.
Is there a way to rebuild a mailbox. I've tried exporting and reimporting the mailbox, but that did not work
I am running a Yosemite 10,10,1 on a 13" MBP (mid 2010)

Quit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
          Envelope Index
          ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results.

Message Type not visible in BD10

Hi,
One of the message types is not visible in BD10. Will this appear if I add it using BD60 transaction. But my doubt is that all the message types visible in BD60 are again not there in the F4 help. Is there some othere place where the message type has to be maintained.
Regards,
Deepti

hi
If you add required message type in BD60 you can see it. but the thing is BD10 is only for MATERIALS. So material related message types only you can see there. It you want to see customer related message type then you can go to BD12.
While creating message type in BD60, system should ask reference message type. You have to select one reference message type while selecting dropdown or pressing f4 for reference field in BD60. If you select MATMAS as reference message type there then you can see that message in BD10.
Reward if it is helpful.
Thanks
Siva Kumar

Message personalizations not visible in WebAccess

Running GW 8.0.2
When personalizing a message (such as changing the subject line) using the full GW client (PC, Mac, or Linux), the personalization doesn't show up in WebAccess. It does from any other platform.
-Barry.

I can confirm that in the beta of Ascot this has been resolved.
T
On Tue, 17 May 2011 13:06:03 GMT, BStJohn
<[email protected]> wrote:
>
>Sorry -- I guess I wasn't clear. Of course you are right that you can't
>personalize from WebAcess, but I mean that when a message is
>personalized from the full client, such as changing the subject line,
>that change isn't visible from WebAccess. The change is visible from
>other desktop clients (PC, Mac, Linux), just not from WebAccess.
>
>That said, I opened an SR and it's been confirmed as a bug. It will be
>fixed in Aspen. Posting here just to let you know and for the benefit
>of anybody else who runs into the issue.
>
>Thanks just the same!
>
>-Barry.

Web Analysis reports charts are not visible in work space

Hi All,
I have created couple of reports in web analysis 11.1.1.3 with charts embeeded in that reports and when i open the same report in the workspace iam not able to see the chart.
If any one have faced this issue give me an idea .
Following are the logs
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795266678" level="ERROR" thread="TP-Processor3" sequence_no="13">
<time>09 Nov 2009 12:34:26,678</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795329303" level="ERROR" thread="TP-Processor3" sequence_no="14">
<time>09 Nov 2009 12:35:29,303</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795332502" level="ERROR" thread="TP-Processor3" sequence_no="15">
<time>09 Nov 2009 12:35:32,502</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
<event logger="com.hyperion.analyzer.utils.chart.a" timestamp="1257795337055" level="ERROR" thread="TP-Processor3" sequence_no="16">
<time>09 Nov 2009 12:35:37,055</time>
<context originator_type="WebAnalysis"/>
<message><![CDATA[
No X11 DISPLAY variable was set, but this program performed an operation which requires it.]]></message>
</event>
Thanks,
Ram

I using local deployment. I deploy my application directly from NWDS to a Mobile Client running also locally in my machine. Maybe I'm wrong, but I think that Mobile Client look for resources in NWDS workspace.
This is the dpi file located in the Mobile Client inbox folder when I perform the deployment.
<?xml version="1.0" encoding="UTF-8"?>
<deployment>
<device>
<repository>
<mcd name="IrviaDemoApp" namespace="" version="1">
<action type="install"/>
<location type="local">
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\MOBILE-INF\MCD.xml" property="mcd" type="file"/>
<component name="hpcds.es~irvia_demo_app">
<applications>
<application deploy="true" name="IrviaDemoApp"/>
</applications>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\bin" property="bin" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp" property="gen_wdp" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\src\mimes" property="mimes" type="dir"/>
<source path="C:\Documents and Settings\oloranube\workspace.sr5.jdi\LocalDevelopment\DCs\company.es\irvia_demo_app\_comp\gen_wdp\application-j2ee-engine.xml" property="j2ee_xml" type="file"/>
</component>
</location>
</mcd>
</repository>
</device>
</deployment>
There is a <source> entry for the mimes directory, where "Component images" are located.
PD: Sorry about my poor english. I hope you to understand me.

Bug Report: Lr3 does not report error when SDK version is too low.

Lr3 should report an error if SDK is under-version'd. For example, I have this in one of my plugins:
LrSdkVersion = 2.0,
LrSdkMinimumVersion = 2.0, -- minimum SDK version required by this plugin.
If I put Lr3.0 specific stuff in the plugin, Lr3 does not report an error, but it should - otherwise whats the point in specifying a version.
I have to take the plugin into Lr2 to test for inadvertent Lr3 specific inclusion mistakes. Thank goodness I'm not worrying about Lr1...
Rob

Hi ,
Could you please helping me out on finding the Patches (SP4,SP5)?
ans also i have tested very oftenly, that my log in credentials are seems to be fine since its working for other reports too.
With Hunting,
MAK

BUG REPORT: Messages often not visible on Galaxy S6 / Skype v5.6.0.12393/534

Similar Messages

Maybe you are looking for