Bug report?  Pagination language problem?

I've been trying to find a link to submit what I think is a bug in iTunes, but if you've ever looked for such a link, you'll get dizzy from all the circles you'll go through.
Anyway, so all of you will know and may know of a way to report it, there seems to be a minor bug with pagination when getting search results within iTunes.
In English: Do a search on an artist with more than 250 songs, which is the max number of songs iTunes can list on a page. Search Frank Sinatra - he has over 2400 songs. (Be sure to click the arrow next to his artist name in the artist column, then click 'see all songs by this artist') At the bottom right of the first page, you will probably see the word mehr or something like it. That's another language word for 'more'. Click it and you'll get the next page, but the language changes, and now you'll see the word 'previous' on the bottom left in whatever language happens to be the current flavor. It seems to rotate through all available languages. And yes, I do have English set as my language in the preferences.
Again, this is minor bug (if that's what it is) and since I know what it is, there isn't any problem using iTunes. But trying to navigate Apple's support pages to find a stupid "report a bug' link leaves me frustrated. This 'bug' has been there for a while, but I thought I'd finally let them know I've noticed it and see if they want to change it.
If I've posted this in the wrong forum; my apologies. Moderator, please locate where most useful.
Best Regards,
Bob

Hey, I see those Mehr and Zurucks, too!
Here's the feedback page:
http://www.apple.com/feedback/itunesapp.html
If you lose it again, you can easily find it by going to itunes menu > Help > Provide iTunes Feedback. No dizzy circles, pretty simple!

Similar Messages

  • BUG- Reports pagination

    I have to post this again as it was listed under different topic-
    Description: Only 15 rows are displayed even when no pagination is selected. I have tried log out/clear cookies etc. I have also set max rows to 100.
    I have posted a test case to reproduce this bug
    Test case link:
    http://htmldb.oracle.com/pls/otn/f?p=26867:6
    Run this page
    Here is the description to reproduce this bug-
    created a table called test-
    2 columns- id and description
    Has 27 rows.
    Create a report. Set pagination scheme to none.
    Set max rows to 100.
    Run the page-
    Only shows 15 rows- no matter what you do
    Please let me know if there is a workaround for this as this is crtical for our application
    Thanks
    Kunal

    Kunal,
    Works now, you had the “number of rows (item)” attributes set to 25. This attribute requires a page item reference, typing in a number results into using the default number of rows, which is 15. This attributes also overwrites “number of rows”, so unless you want to specify the number of rows dynamically at run-time, you should keep that field set to NULL.
    Regards,
    Marc

  • Report Painter language problem

    Hi,
    When we logon to Report painter Reports in Polish Language, the report is not displayed in Polish Language.. but English language..
    I have checked the following:-
    1. PL language is maintained in GCRS T-Code.
    2. The concerned GL also appears in SKAT table in PL language.
    3. I have also executed GR59 to import it from Source client 000
    4. Also executed GR55 to execute the report group.
    5. Also checked SAP Note No. 719246.
    The GL's despite that appears in English language and not in Polish Language.. Any idea what can be done to get the display in Polish language.
    Regards,
    SAPFICO

    Report painter/Writer always creates a prerformance issue.i never preffred them since i have a option with Zreport
    now you can do only one thing put more checks on selection-screen for filtering the data.i think thats the only way.
    Amit.

  • Interactive Report Russian Language Problem

    Hello,
    Entering Russian characters to search field of Interactive Report APEX transform it to another charset and I receive wrong result. For example entering КС I get РљРЎ, any ideas?
    Best Regards, Kostya Proskudin

    Answer for my question:
    Changing character set in DAD file. From CL8MSWIN1251 to AL32UTF8.
    But I still can't understand why it happen only in Interactive Report!!!

  • Blur Problems (bug report submitted)

    I've submitted a bug report and will submit this again since its a better version of when I sent them before. The problem is this:
    - Adobe Acrobat Professional shows blur in certain situations. In another situation, the same file opens correctly. The file below is self-explanatory, i.e.:
    1. This is what you see when you do a fresh start, with no pre-existing Adobe processes running. Sometimes though the blur will show up even if its a fresh start.
    2. Thats what you see when the file has been closed but Acrobat Professional is still running and open.
    If anyone needs the original PDF, it can be downloaded at:
    http://www.2shared.com/document/P927Y4Vm/scanned-doc-2.html
    In area 1, you can see the glaring difference in visual quality. The blur makes it very hard and irritating to read the PDF. Notice how the blur alternates. Some areas are sharp while others are soft. Area 2 is how it should always look like (crisp).
    If you cant see this image properly, it is uploaded at:
    http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
    Adobe Acrobat Professional version, latest: 9.3.4
    System: Windows XP
    BUG: Adobe Acrobat Professional shows blurry PDFs in certain situations.
    ===
    STEPS TO RECREATE THE BUG:
    Use Windows XP. I'm not sure if this shows up in Vista too. I'm sure it does.
    1. Download the PDF from:
    http://www.2shared.com/document/P927Y4Vm/scanned-doc-2.html
    2. In the Windows Task Manager, make sure there are no pre-existing Adobe processes running such as:
    AcrobatInfo.exe, Acrobat.exe, Acrotray.exe
    3. Open the PDF file you got in #1. Set zoom to 100%.
    4. Notice the visual quality. You will probably see blurry areas in the PDF. This matches Area 1 in this screen shot:
    http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
    5. Close the file by doing: File---> Close
    Do not exit the program. Go to Task Manager and verify that Acrobat.exe is already running.
    6. Open the file you got in #1, again. Zoom to 100% again.
    7. Notice now that the PDF does not have any blurry areas. What you see should match Area 2 in the same screenshot:
    http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
    -End-

    The choices in Bridge > Preferences > Advanced > International > Keyboard are limited, and they do not allow for choosing custom keyboard layouts.
    I need the custom keyboard layouts for a variety of reasons, such as being able to type in seven languages with my most used one without switching, two Russian layouts to allow for two non-standard ways of encoding Russian fonts, etc.

  • Sending a bug report on the OS and a sleep mode problem.

    I find the bug button in Safari really convenient for sending Apple bug reports. And when other applications crash, you usually get an error dialog with a button to send a bug report. But sometimes problems arise that require reporting, but which don't fall in either of these categories. It would be very handy to have a bug "button" for the OS, or perhaps just a menu selection in the Finder menu bar that invokes a bug report dialog box. I know you can dig around and find the URL for Apple's bug report web page, but I am always forgetting it -- I suppose I could just bookmark it, but then I'd just have to dig around in all the bookmarks to find it. Better would be a utility built-in to the OS for sending bug reports (like Safari's). It could also automatically transfer necessary info about the OS rev and such.
    The problem I had was this. I have a script that puts my iMac to sleep. I put the script alias on the task bar and a single click puts the computer to sleep (easier than using the menu). Unfortunately, I sometimes click it by mistake when I am trying to click an adjacent icon in the task bar, and the Mac starts going through its cycle to enter sleep mode and is impervious to anything I do to try and cancel it. I tried pressing the space bar continuously to prevent it from going to sleep, but that did not work. Worse, when it went to sleep and I woke it up again, the task bar would not appear, clicking on app windows did not activate them, Finder menus could not be selected, etc. The cursor would move, but I could not do anything else. (I wish now I had noted if the clock in the menu bar was still advancing, but I didn't think to do that.) I powered down the iMac from the power key and rebooted. Things are working fine now.
    I wanted to send a bug report on this, but realized that unlike Safari, there was no button or menu selection for doing that. So here I am.
    Any suggestions are welcome.
    TIA,
    Drake

    [email protected]
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Acrobat X Scanning Cancelled Problem / WORKAROUND / BUG REPORT

    As you have read in other threads, Acrobat X on Windows has a serious scanning problem with HP and possibly other scanners.
    Whereas in Acrobat 9 scanning worked reasonably well, Acrobat X seems to be unable to cope with scanning documents from the flat bed of a multifunction scanner.
    So, if you are scanning from the feeder, scanning works, but if you are scanning from the flatbed, you will get a brief pause and the phrase SCANNING CANCELLED.
    This is, of course, not acceptable.
    The problem is that Acrobat X does not play nicely with the scanner drivers.  Previously, Acrobat 9 would "auto-detect" the source of a document, using the feeder if loaded, and "falling back" to the flatbed otherwise.  However, Acrobat X does not fall back.  If there is nothing loaded in the document feeder, the scan will be cancelled by Acrobat X.
    The workaround - and I would NOT call this a "solution" - is to use only the "Custom Scan" command from Acrobat X.  When the window pops up, choose the "Options" button and select "Native Mode" and "Show Scanner's Native Interface" from the two menus.  (Acrobat X does seem to remember these settings at least within a session, so if you're scanning multiple documents you only need to do this once.)  Then scan.
    You will see a new window pop up - the scanner's "native interface."  On my computer, this window shows up BEHIND the Acrobat X screen (annoyingly) so you have to watch for it and click forward.  Be sure to select "flat bed" from the "document source" menu.  On my computer, this setting is NOT remembered between scans, so you have to do this for EVERY SCAN.  Then, the document will scan, and you can do what you want with it in Acrobat X.
    Needless to say, this is a long, painful, slow process, especially if you're scanning lots of flatbed items, as I do.  Hence it's a "workaround" and NOT a "solution".
    The SOLUTION will be for Adobe to FIX this.  ADOBE:  THIS IS A BUG REPORT.  PLEASE LOG THIS IN AND FIX IT.  Acrobat 9 with CS5 worked perfectly, as did Acrobat 8 before it.  Moving to CS5.5 with Acrobat X broke this.  Sloppy.  Please fix!  Thank you!
    Glen Barney

    I used your workaround (thank you!) but it was very annoying. Although I set up the options for a single multi-page document, Adobe gave me separate files and I had to consolidate them. I also had to fill out the options (color, flatbed vs feeder) for each page. This function was working for me at some point, so I don't know what happened to make my HP Multifunction and Adobe part ways. I hope Adobe comes up with a successful patch for this problem.

  • BUG: Session 0 - Report - Pagination

    Hello,
    the problem is as follows:
    After reloading a report (pagination, next range), the session 0 gets lost.
    My setting:
    Apex 4.2.2.
    Two pages, the first displays a report and the second the details.
    The report has activated pagination.
    Example for the report source:
    SELECT APEX_UTIL.Prepare_Url('f?p='||:APP_ALIAS||':DETAIL:'||:APP_SESSION||'::::P11_OID:'||OID)         AS LINK
    Course of events:
    Open the report page with session id 0
    see the url of the report links, it still has the session id 0
    f?p=APEX_CON:DETAIL:0::::P11_OID:58605
    Click on the pagination button 'Next'
    see the url of the report links, there is a new session id and no session id 0
    f?p=APEX_CON:DETAIL:9649916689018::::P11_OID:57645
    Thanks,
    Max

    Hi Jari,
    thanks for the quick response.
    I tried the following:
    Report source:
    SELECT APEX_UTIL.Prepare_Url('f?p='||:APP_ALIAS||':DETAIL:'||:APP_SESSION_VISIBLE||'::::P11_OID:'||OID)         AS LINK
    Report result:
    Open the report page with session id 0f?p=APEX_CON:DETAIL:0::::P11_OID:58605
    Click on the pagination button 'Next'f?p=APEX_CON:DETAIL:9649916689018::::P11_OID:57645
    Report source:
    SELECT APEX_UTIL.Prepare_Url('f?p='||:APP_ALIAS||':DETAIL:666666::::P11_OID:'||OID)         AS LINK
    Report result:
    Open the report page with session id 0f?p=APEX_CON:DETAIL:0::::P11_OID:58605
    Click on the pagination button 'Next'f?p=APEX_CON:DETAIL:666666::::P11_OID:57645
    Report source:
    SELECT 'f?p='||:APP_ALIAS||':DETAIL:666666::::P11_OID:'||OID         AS LINK
    Report result:
    Open the report page with session id 0f?p=APEX_CON:DETAIL:666666::::P11_OID:58605
    Click on the pagination button 'Next'f?p=APEX_CON:DETAIL:666666::::P11_OID:57645
    I think the function APEX_UTIL.Prepare_Url in combination with an AJAX report refresh is the problem.

  • Bug Report Problem

    I think there's a bug in the "bug report" procedure. Says I'm signed in but on next page says sign-in which takes me in a loop.

    I have move my 5 x LC around, rebuild pref ?
    yes, something like that. Firstly I would try to bring the LCs and XTs to default. Choose "Logic Pro/Preferences.../Control Surfaces/Rebuild Defaults".
    If that doesn't help shut down all your devices and delete them from the CS-setup window. Quit Logic and delete
    ~/Library/Preferences/Logic/com.apple.logic.pro.cs
    start Logic. When started switch on the LCs one after the other from left to right.
    If that doesn't help, re-write the firmware. And if that doesn't help or if you already did all this:
    sorry!
    cheers
    Martin

  • Bug report: A keyboard layout is incorrect on the remote with Japanese keyboard

    This is a bug report for Microst Remote Desktop
    ===================================================
    ## Summary
    A keyboard layout is incorrect on the remote with Japanese keyboard
    ## Version Information, I tested
    * Client
        * Case 1
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Lion 10.7.5
            * Microsoft Remote Desktop 8.0.24308
        * Case 2
            * MacBook Pro with JIS106 Keyboard
            * Mac OS X Mavericks 10.9.1
            * Microsoft Remote Desktop 8.0.24308
    * Remote
        * Case 1
            * Windows 7 Professional Japanese
        * Case 2
            * Windows Server 2008R2 Datacenter Japanese
        * Case 3
            * Windows Server 2012R2 Datacenter Japanese
    ## Detail of bug
    When login from Mac OS X with Microsoft Remote Desktop, the keyboard layout is always incorrect on the remote.
    The client machine have a built-in keyboard of JIS 106 layout,
    and the primary language is set to Japanese.
    But on the remote, the keyboard layout is US 101.
    So a input of Shift+2 does not result " but @.
    I've seen the above behavior on the 3 remote enviornments described the above.
    This bug did not occcur with Microsoft Remote Desktop Connection Client for Mac 2.1.1, even if the system language is English and keyboard layout is Japanese.
    ## Captures
    I've took some of screen captures.
    I'm sorry for the capture includes Japanese words, so I added description in English.
    Capture 1:
    Mac OS X Keyboard Setting
    Capture 2:
    Windows Server 2012R2 Screen Keyboard
    Capture 3:
    Windows Server 2012R2 Screen Keyboard, with a additional registry key configured.

    This bug also affects the Canadian English settings.  If the client is set to Canadian English with a US keyboard the remote server is setup using a Canadian French keyboard.  Using the language selection in the toolbar you can temporarily correct
    the problem but the keyboard resets to french at the most inopportune times.  The was a problem in the earlier RDP client and was fixed so it's sad to see it reoccur in the new client.
    Lawrence

  • KSLD bug report:  32 bit causes target panic

    Since the bug report link:
    http://soldc.sun.com/developer/support/driver/tools/KSLD/bug-report.html
    goes to a non existant email address, I thought I would post here.
    Setup:
    ksld 1.01
    target and host booted with kernel/unix (32 bit)
    /proto directory struct as described in starting ksld doc
    debugging ramd driver example
    ramd directory:
    drwxr-xr-x 4 root other 512 Feb 11 12:40 .
    drwxr-xr-x 10 root other 512 Feb 11 12:47 ..
    drwxrwxrwx 2 bin bin 512 Feb 11 10:26 777
    -rw-r--r-- 1 root other 341 Feb 11 11:31 Makefile
    -rw-r--r-- 1 root other 1610 Apr 24 2001 README
    -rw-r--r-- 1 root other 3588 Apr 18 2001 install
    lrwxrwxrwx 1 root other 52 Feb 11 10:47 misc -> /export/home/ksld-space/proto/root_sparc/kernel/misc
    -rw-r--r-- 1 root other 2523 Apr 18 2001 ntestram.c
    -rw-r--r-- 1 root other 2542 Apr 18 2001 printinfo.c
    lrwxrwxrwx 1 root other 6 Feb 11 10:46 proto -> /proto
    -rw-r--r-- 1 root other 25713 Feb 11 11:29 ramd.c
    -rw-r--r-- 1 root other 291 Apr 18 2001 ramd.conf
    -rw-r--r-- 1 root other 210 Apr 18 2001 ramio.h
    drwxrwxrwx 4 bin bin 512 Feb 11 19:51 sparc
    -rw-r--r-- 1 root other 1785 Apr 18 2001 testram.c
    lrwxrwxrwx 1 root other 67 Feb 11 10:48 unix.281 -> /export/home/ksld-space/proto/root_sparc/platform/sun4u/kernel/unix
    HOST output
    home1# ksld -t hardwire unix.281 99
    Reading unix.281
    KSLD v1.0 on sun4u [SunOS 5.8]
    Current thread is 0x4001fe60
    Reading krtld
    Reading genunix
    Reading platmod
    Reading SUNW,UltraSPARC-II
    Reading specfs
    Reading TS
    Reading TS_DPTBL
    Reading ufs
    Reading fssnap_if
    Reading rpcmod
    Reading ip
    Reading rootnex
    Reading options
    Reading sad
    Reading pseudo
    Reading sd
    Reading scsi
    Reading glm
    Reading pcipsy
    Reading dada
    Reading todmostek
    Reading procfs
    Reading sockfs
    Reading clone
    Reading ip6
    Reading tcp
    Reading md5
    Reading tcp6
    Reading udp
    Reading udp6
    Reading icmp
    Reading icmp6
    Reading arp
    Reading timod
    Reading conskbd
    Reading wc
    Reading ebus
    Reading su
    Reading kb
    Reading ms
    Reading consms
    Reading se
    Reading elfexec
    Reading fifofs
    Reading ldterm
    Reading ttcompat
    Reading zs
    Reading ptsl
    Reading ptc
    Reading rts
    Reading tl
    Reading keysock
    Reading sysmsg
    Reading cn
    Reading pipe
    Reading mm
    Reading hme
    Reading ufs_log
    Reading doorfs
    Reading devinfo
    Reading iwscn
    Reading log
    Reading sy
    Reading fctl
    ksld_dbx: can't stat /platform/sun4u/kernel/drv/afb -- No such file or directory
    Reading afb
    ksld_dbx: can't open /platform/sun4u/kernel/drv/afb -- No such file or directory
    Reading fd
    Reading busra
    Reading cs
    Reading winlock
    Reading seg_drv
    Reading usba
    Reading kstat
    Reading vol
    Reading cpc
    Reading tnf
    Reading pcihp
    Reading hpcsvc
    Reading pcicfg
    Reading nfssrv
    Reading nfs
    Reading rpcsec
    Reading tlimod
    Reading seg_mapdev
    Reading inst_sync
    Reading mntfs
    Reading tmpfs
    Reading klmmod
    Reading autofs
    Reading connld
    Reading bootdev
    Reading shmsys
    Reading ipc
    Reading ramd
    Reading kaio
    detected a multithreaded program
    t@0 stopped in (unknown) at 0xedd000d8
    0xedd000d8: ta %icc,%g0 + 125
    (ksld_dbx) module -v ramd.o
    Module: ramd.o
    Language: ansic
    Debugging information: read [stabs version: 3.1]
    Source file: /opt/SUNWddk/src/drivers/ramd/ramd.c
    Object file: /opt/SUNWddk/src/drivers/ramd/sparc/obj32/ramd.o
    Loadobject: /usr/kernel/drv/ramd
    (ksld_dbx) stop in ram_strategy
    (2) stop in ram_strategy
    poll in failed
    can't set breakpoint
    TARGET output:
    connected
    New connection: uid 0, fd 7
    Begin traceback... sp = edd48290
    Called from edd009dc, fp=edd47b41, args=34 edd308ee eddc40a8 34 edd042f0 edd042ec
    Called from edd03624, fp=edd47c11, args=fff74000 edda51f0 102d087a ffffffff91d0207e 0 4
    Called from edd0c0d0, fp=edd47cd1, args=102d087a 91d0207e ff1bd714102d087a 100 edd48608 27
    Called from edd0a394, fp=edd47d81, args=eddb7788 8 eddc16a1 f0000 1 ffff
    Called from edd176d4, fp=edd47e31, args=ffff eddb7788 0 1 0 eddc1690
    Called from edd0e470, fp=edd47f41, args=edd49058 0 0 3c 0 edda69d8
    Called from edd0e214, fp=edd47ff1, args=eddb6d58 eddc1690 edd49158 ffffffffffffffff 10000 edd483e0
    Called from edd0e154, fp=edd480a1, args=eddc1640 edda3550 0 0 0 0
    Called from edd071b4, fp=edd48121, args=0 0 0 0 0 0
    Called from 0, fp=0, args=0 0 0 0 0 0
    End traceback...
    abort jump: trap 34 sp edd48290 pc edd042ec npc edd042f0
    etext edd308ee estack edd489a0 edata edda2388 nofault edda2658
    ksld_kadb[0]: (`o403P0801So6mLD42d8N_lK^bH00004)(`o403P0801So6mLD42d8N_lK^bH0000
    panic[cpu0]/thread=4001fe60: BAD TRAP: type=34 rp=4002fbc0 addr=40030507 mmu_fsr=0
    sched: alignment error:
    addr=0x40030507
    pid=0, pc=0xedd2ba78, sp=0x4002fc50, tstate=0x1404, context=0x0
    g1-g7: 1000c000, edda1f78, edda1f78, 0, edda2658, 14aef0, 4001fe60
    panic: entering debugger (continue to save dump)
    Trap 7d
    What is wrong with the setup,when a breakpoint would cause a traceback and panic on the target?

    One other possibility is having sufficient rights, especially if you are invoking it via some other app, rather than manually as a logged in user. If you are not logged in and instead invoke it via a web site action, I believe you will have problems reading the registry, accessing a desktop, writing to disk, etc.
    Sorry I can't be more definitive, but perhaps it will help.
    Please post your conclusion, if you find it.
    --Ian

  • Solaris 9 x86 bug report - el_GR.ISO8859-7 & CDE

    I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
    It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
    If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
    the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
    no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
    I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
    :0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
    in /usr/dt/config/Xservers file, to start the X server.
    Here is the $HOME_DIR/.dt/startlog file:
    --- ??? 23 ??? 2003 12:10:51
    --- /usr/dt/bin/Xsession starting...
    --- starting /usr/openwin/bin/speckeysd
    --- Xsession started by dtlogin
    --- starting /usr/dt/bin/dtsession_res -load -system
    --- sourcing /root/.dtprofile...
    --- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
    --- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
    --- sourcing /usr/dt/config/Xsession.d/0020.dtims...
    --- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
    --- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
    --- sourcing /usr/dt/config/Xsession.d/1000.solregis...
    --- could not read /root/.profile
    --- starting /usr/dt/bin/dthello &
    --- starting /usr/dt/bin/dtsearchpath
    --- starting /usr/dt/bin/dtappgather &
    --- starting /usr/dt/bin/dsdm &
    --- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
    --- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
    --- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
    --- starting desktop on /dev/pts/3
    Sun Microsystems Inc.     SunOS 5.9     Generic_112234-03     November 2002
    /usr/dt/bin/ttsession[337]: starting
    X connection to :0.0 broken (explicit kill or server shutdown).
    X connection to :0.0 broken (explicit kill or server shutdown).
    I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
    Anyway, I hope this will help developers solve a problem -if it really exists-.
    Angelos Vasilopoulos
    Site Security Officer
    [email protected]

    I'm posting this article here, because I can't find any official Solaris 9 x86 bug report page. I hope the developers will notice it. I'm using Solaris 9 x86 (12/02), with the latest 9_x86_Recommended patch cluster installed, and support for Greek installed too.
    It seems there is some kind of problem, when trying to view text files with Greek (el_GR.ISO8859-7) characters, which were created under Windows. To be more specific:
    If I boot at CDE with language el_GR.ISO8859-7, and try to view a .txt file (just with a simple double click), which I have created under Windows, with Greek characters,
    the screen goes black, and the CDE login screen appears again (restarts). If I keep the Greek language or change the language to US English, I can boot at CDE again, with
    no problems. If I try "command line logging", the screen goes off - just like when the computer is powered off, and I can't do anything, (well, except pressing the reset button, that's the sure way). And if I use the "init 6" command, while being logged at CDE, from a terminal, the Graphical Desktop exits, and then, the screen goes off again (just like the computer is powered off), but finally the computer manages to restart.
    I'm using the Sun X server, NOT the XFree86 porting kit and I use the entry
    :0 Local local_uid@console nobody /usr/openwin/bin/Xsun :0 -dpsfileops
    in /usr/dt/config/Xservers file, to start the X server.
    Here is the $HOME_DIR/.dt/startlog file:
    --- ??? 23 ??? 2003 12:10:51
    --- /usr/dt/bin/Xsession starting...
    --- starting /usr/openwin/bin/speckeysd
    --- Xsession started by dtlogin
    --- starting /usr/dt/bin/dtsession_res -load -system
    --- sourcing /root/.dtprofile...
    --- sourcing /usr/dt/config/Xsession.d/0010.dtpaths...
    --- sourcing /usr/dt/config/Xsession.d/0015.sun.env...
    --- sourcing /usr/dt/config/Xsession.d/0020.dtims...
    --- sourcing /usr/dt/config/Xsession.d/0030.dttmpdir...
    --- sourcing /usr/dt/config/Xsession.d/0040.xmbind...
    --- sourcing /usr/dt/config/Xsession.d/1000.solregis...
    --- could not read /root/.profile
    --- starting /usr/dt/bin/dthello &
    --- starting /usr/dt/bin/dtsearchpath
    --- starting /usr/dt/bin/dtappgather &
    --- starting /usr/dt/bin/dsdm &
    --- session log file is /root/.dt/sessionlogs/www_DISPLAY=:0
    --- DTSOURCEPROFILE is 'true' (see /root/.dtprofile)
    --- execing /usr/dt/bin/dtsession with a /sbin/sh login shell ...
    --- starting desktop on /dev/pts/3
    Sun Microsystems Inc.     SunOS 5.9     Generic_112234-03     November 2002
    /usr/dt/bin/ttsession[337]: starting
    X connection to :0.0 broken (explicit kill or server shutdown).
    X connection to :0.0 broken (explicit kill or server shutdown).
    I don't know if this is a bug or something, and I'm very curious about the cause. I didn't have much time for any other "experiments".
    Anyway, I hope this will help developers solve a problem -if it really exists-.
    Angelos Vasilopoulos
    Site Security Officer
    [email protected]

  • APEX 3.1 Report pagination style limited by max row count

    I am working on an application using APEX 3.1 and am having trouble keeping the report pagination style as a select list when the max row count for the report is greater than 8000. If I use the select list as the pagination method, the first time that the first page is viewed is fine however all subsequent pages begin to use the "next" and "previous" link method of pagination. This is only occurring when the max row count is higher than 8000 and a select list is used for pagination.
    My question is: is the style of pagination, in Oracle APEX (3.1), limited by the potential number of rows returned for the report? If not, is this a bug with my version of Oracle APEX?

    The source of my problem was that the report referenced a page item for the number of rows. That select list referenced a named List of Values (LOV) that limited the number of rows that the report could display. I removed that reference and my problem disappeared!

  • How to do a bug report when firefox doesn't crash ?

    Hello everybody,
    I have Firefox nightly since a long time now. But since the beginning of the week, I've got some issues with it. New packages doesn't changed anything.
    I have 2 Firefox windows opened, but I can only go to one of them, the other one is inaccessible. I can see it with the Windows task-bar, but, when I click on it nothing occurs.
    I'd like to open a bug report, but I don't know what information I have to send with it : everything is about crash report and it isn't.
    And yes, I tried to restart with plug-in disabled, ... and it doesn't change anything.
    Thanks for taking you time answering me, (and sorry for my English)

    I would suggest first of all that you try using a normal release of Firefox. It is easy to use both an ordinary release and another version of Firefox on the same computer,post again if you need help with that.
    It is possible the problem you see is not unique to firefox nightly and may even relate to the use of Windows 7.
    Have you already read [[safe mode]]
    What is your first language?

  • Bug Report: The keyboard focus doesn't automatical...

    Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
    Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
    Steps to reproduce it:
    1. From "View" menu, activate the "Split Window View", if it is not already enabled.
    2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
    3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
    4. Activate the "Save" button, to save the changes.
    5. Close all windows, related to Skype. You may keep only the main window opened.
    6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
    7. Move the system/keyboard focus in the chat entry edit field and keep it there.
    8. Switch to another window, preferably from another application.
    9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
    Test environment:
    - Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
    - Skype version: 7.0.0.102 for Desktop.

    This is a known problem, but Skype have not given us an estimated time for a fix.
    Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
    Sean Ellis - uses Skype chat for serious work
    Click here to read my blog post on Skype 7 and basic principles of GUI design

Maybe you are looking for