Bug Report: Process Version sometimes reports "nil"

I think this occurs mostly if not always when Process Version is 2003 - sometimes I read "nil" as process version develop setting, sometimes it reads "2003"(i.e. 5.0, if I remember right) - seems to be sort of random / intermittent.
I'm talking about the photo:getDevelopSettings function, 'ProcessVersion' key.
Rob

Post Author: Bandi
CA Forum: Crystal Reports
Hi Shannara,
It sounds like your patience with Crystal 11 is running thin
Not sure if this will help, but I had a similar issue a while ago. Speed was woeful to say the least. The way I fixed it was to right click on the desktop, then go to properties -> Settings tab -> Advanced button -> Troubleshoot tab and fiddled with the Hardware acceleration slider. Not sure what was causing the issue, but that sorted it for me.
Hope it helps, Anthony

Similar Messages

Bootcamp Version 3.1 --List of bug reports for the Development Team to fix.

Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist

lawlist wrote:
Please create a list of bug fixes for the Development Team to address in the next version of Bootcamp (e.g., 3.2). This thread assumes that all users are presently running Bootcamp 3.1:
1. Sound should not be muted every time a user reboots a newer MacBook laptop using Windows 7 Ultimate, 64-bit. My sound is always muted when I load Windows 7 Ultimate, and I have to manually turn it on each time.
2. Left and right clicks on the trackpad should work out of the box using Windows 7 Ultimate, 64-bit. My left click operates a little less than 50 percent of the time -- i.e., I click it and nothing happens. I had to switch to "tap to click" as a workaround, however, I prefer the good old solid left click.
Please step right up and add to the bug report list so that the developers have a checklist of issues that need to be fixed. When the bug report list has grown to a respectable size, I'll send an official letter to the C.E.O. to facilitate the bug reports reaching the development team.
Message was edited by: lawlist
FWIW, I don't have the symptoms you describe. So I think before you call a symptom a "bug" I think you should confirm that it is indeed a "bug" and not a configuration, software, or hardware issue caused by something such as incorrect installation, incorrect setup, or any other third party or user caused action.
Also, FWIW, I don't think this forum is intended to be used as a survey for gathering "bugs". Apple has an official feedback page where they gather user experiences such as yours. I think if you post your "bugs" there they will get faster attention than posting them here in this user-to-user help forum.

Blur Problems (bug report submitted)

I've submitted a bug report and will submit this again since its a better version of when I sent them before. The problem is this:
- Adobe Acrobat Professional shows blur in certain situations. In another situation, the same file opens correctly. The file below is self-explanatory, i.e.:
1. This is what you see when you do a fresh start, with no pre-existing Adobe processes running. Sometimes though the blur will show up even if its a fresh start.
2. Thats what you see when the file has been closed but Acrobat Professional is still running and open.
If anyone needs the original PDF, it can be downloaded at:
http://www.2shared.com/document/P927Y4Vm/scanned-doc-2.html
In area 1, you can see the glaring difference in visual quality. The blur makes it very hard and irritating to read the PDF. Notice how the blur alternates. Some areas are sharp while others are soft. Area 2 is how it should always look like (crisp).
If you cant see this image properly, it is uploaded at:
http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
Adobe Acrobat Professional version, latest: 9.3.4
System: Windows XP
BUG: Adobe Acrobat Professional shows blurry PDFs in certain situations.
===
STEPS TO RECREATE THE BUG:
Use Windows XP. I'm not sure if this shows up in Vista too. I'm sure it does.
1. Download the PDF from:
http://www.2shared.com/document/P927Y4Vm/scanned-doc-2.html
2. In the Windows Task Manager, make sure there are no pre-existing Adobe processes running such as:
AcrobatInfo.exe, Acrobat.exe, Acrotray.exe
3. Open the PDF file you got in #1. Set zoom to 100%.
4. Notice the visual quality. You will probably see blurry areas in the PDF. This matches Area 1 in this screen shot:
http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
5. Close the file by doing: File---> Close
Do not exit the program. Go to Task Manager and verify that Acrobat.exe is already running.
6. Open the file you got in #1, again. Zoom to 100% again.
7. Notice now that the PDF does not have any blurry areas. What you see should match Area 2 in the same screenshot:
http://img96.imageshack.us/img96/4113/adobeacrobatproblurbug.jpg
-End-

The choices in Bridge > Preferences > Advanced > International > Keyboard are limited, and they do not allow for choosing custom keyboard layouts.
I need the custom keyboard layouts for a variety of reasons, such as being able to type in seven languages with my most used one without switching, two Russian layouts to allow for two non-standard ways of encoding Russian fonts, etc.

Bug Report: The keyboard focus doesn't automatical...

Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
7. Move the system/keyboard focus in the chat entry edit field and keep it there.
8. Switch to another window, preferably from another application.
9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.

This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

Bug Report: New conversation window stills the sys...

Bug Report: Skype Desktop: New conversation window stills the system/keyboard focus.
When the UI is in multi-window mode and a conversation window pops up (due for example to a newly received chat message), that window steals the system/keyboard focus, even though it appears in a minimized state in the Windows taskbar. And this should not happen by default, because it is impractical (especially for screen reader users). And it didn't happen in Skype 6.21 and earlier. But since the new UI was introduced officially in Skype 7.0, it started happening constantly.
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Move the system focus to another application.
7. Tell someone to send you a chat message. When the message arrives and the conversation window pops up minimized in the Windows Taskbar, everything seams to be as it should. A few seconds after that however, the system/keyboard focus gets moved to that new conversation window, even though it is neither restored/maximized (it is minimized), nor it is visible on the screen (except as a button in the taskbar).
Actual results:
When a new conversation window pops up in the Windows taskbar, it stills the system/keyboard focus to itself from the currently focused application.
Expected results:
Skype's popping up new conversation windows should not still the system/keyboard focus to themselfs from the currently focused application.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.

This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

Help! Macbook Pro Keeps Crashing. Here Is The Bug Report

Please, please, please can someone help me my mac keeps crashing for the last week and I dont know why.
I keep getting the grey screen of death
I have included the bug report below.
Mac Specs
I have a Macbook Pro 17"
Model Identifier: MacBookPro8,3
Late 2011 Version
2.2ghz Intel Core i7
Intel HD Graphics 3000 512 MB
Software OS X 10.9.4 (13E28)
I am running the OS off an SSD 750 GB Drive connected internally (have been for over a year with no issues)
The drive that came with my mac got corrupted so I replaced it with the SSD
I am using an external monitor AOC connected via thunderbolt (have had this set up for over 1.5 years with no issues.
Bug Report
Anonymous UUID: DDEA4723-7244-E776-B61A-34B381E8523F
Tue Jul 29 23:34:57 2014
panic(cpu 5 caller 0xffffff8003e4e5ca): "A kext releasing a(n) GenericUSBXHCI has corrupted the registry."@/SourceCache/xnu/xnu-2422.110.17/libkern/c++/OSObject.cpp:218
Backtrace (CPU 5), Frame : Return Address
0xffffff81ee4cbe00 : 0xffffff8003a22f79
0xffffff81ee4cbe80 : 0xffffff8003e4e5ca
0xffffff81ee4cbed0 : 0xffffff8003e9b6e7
0xffffff81ee4cbef0 : 0xffffff8003ea9d0f
0xffffff81ee4cbf30 : 0xffffff8003eaf292
0xffffff81ee4cbf80 : 0xffffff8003eaf367
0xffffff81ee4cbfb0 : 0xffffff8003ad7417
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide: 0x0000000003800000
Kernel text base: 0xffffff8003a00000
System model name: MacBookPro8,3 (Mac-942459F5819B171B)
System uptime in nanoseconds: 49357323350
last loaded kext at 46443091940: com.apple.driver.AppleBluetoothMultitouch 80.14 (addr 0xffffff7f858c1000, size 77824)
loaded kexts:
com.bresink.driver.BRESINKx86Monitoring 9.0
com.avatron.AVExFramebuffer 1.7
com.displaylink.driver.DisplayLinkDriver 2.1
net.telestream.driver.TelestreamAudio 1.1.0
com.techsmith.TACC 1.0.2
com.logmein.driver.LogMeInSoundDriver 1.0.3
com.avatron.AVExVideo 1.7
com.sonnet.driver.SXHCD 1.27.9b2
net.osx86.kexts.GenericUSBXHCI 1.2.7
com.apple.driver.AppleBluetoothMultitouch 80.14
com.apple.driver.AppleHWSensor 1.9.5d0
com.apple.filesystems.autofs 3.0
com.apple.iokit.IOBluetoothSerialManager 4.2.6f1
com.apple.driver.AGPM 100.14.28
com.apple.driver.AppleTyMCEDriver 1.0.2d2
com.apple.driver.AppleMikeyHIDDriver 124
com.apple.driver.ApplePolicyControl 3.6.22
com.apple.driver.AppleMikeyDriver 2.6.3f4
com.apple.driver.AudioAUUC 1.60
com.apple.driver.AppleUpstreamUserClient 3.5.13
com.apple.iokit.IOUserEthernet 1.0.0d1
com.apple.kext.AMDFramebuffer 1.2.4
com.apple.driver.AppleHDAHardwareConfigDriver 2.6.3f4
com.apple.iokit.IOBluetoothUSBDFU 4.2.6f1
com.apple.Dont_Steal_Mac_OS_X 7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.AppleHDA 2.6.3f4
com.apple.driver.AppleHWAccess 1
com.apple.AMDRadeonX3000 1.2.4
com.apple.driver.AppleIntelMCEReporter 104
com.apple.driver.AppleIntelHD3000Graphics 8.2.4
com.apple.driver.AppleLPC 1.7.0
com.apple.driver.AppleThunderboltIP 1.1.2
com.apple.kext.AMD6000Controller 1.2.4
com.apple.driver.AppleSMCPDRC 1.0.0
com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0
com.apple.driver.AppleSMCLMU 2.0.4d1
com.apple.driver.SMCMotionSensor 3.0.4d1
com.apple.driver.AppleIntelSNBGraphicsFB 8.2.4
com.apple.driver.AppleMuxControl 3.6.22
com.apple.driver.AppleBacklight 170.3.5
com.apple.driver.AppleMCCSControl 1.2.5
com.apple.driver.AppleUSBTCButtons 240.2
com.apple.driver.AppleUSBTCKeyEventDriver 240.2
com.apple.driver.AppleUSBTCKeyboard 240.2
com.apple.driver.AppleIRController 325.7
com.apple.driver.AppleFileSystemDriver 3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN 1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0d1
com.apple.BootCache 35
com.apple.driver.XsanFilter 404
com.apple.driver.AppleUSBXHCI 683.4.0
com.apple.driver.AppleUSBHub 683.4.0
com.apple.iokit.IOAHCIBlockStorage 2.6.0
com.apple.driver.AppleFWOHCI 5.0.2
com.apple.driver.AirPort.Brcm4331 700.20.22
com.apple.iokit.AppleBCM5701Ethernet 3.8.1b2
com.apple.driver.AppleAHCIPort 3.0.5
com.apple.driver.AppleUSBEHCI 660.4.0
com.apple.driver.AppleUSBUHCI 656.4.1
com.apple.driver.AppleSmartBatteryManager 161.0.0
com.apple.driver.AppleRTC 2.0
com.apple.driver.AppleACPIButtons 2.0
com.apple.driver.AppleHPET 1.8
com.apple.driver.AppleSMBIOS 2.1
com.apple.driver.AppleACPIEC 2.0
com.apple.driver.AppleAPIC 1.7
com.apple.driver.AppleIntelCPUPowerManagementClient 217.92.1
com.apple.nke.applicationfirewall 153
com.apple.security.quarantine 3
com.apple.driver.AppleIntelCPUPowerManagement 217.92.1
com.apple.driver.IOBluetoothHIDDriver 4.2.6f1
com.apple.driver.AppleMultitouchDriver 245.13
com.apple.kext.triggers 1.0
com.apple.iokit.IOSCSIArchitectureModelFamily 3.6.6
com.apple.iokit.IOSerialFamily 10.0.7
com.apple.iokit.IOSurface 91.1
com.apple.iokit.IOBluetoothFamily 4.2.6f1
com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.2.6f1
com.apple.driver.DspFuncLib 2.6.3f4
com.apple.vecLib.kext 1.0.0
com.apple.iokit.IOAcceleratorFamily 98.22
com.apple.driver.AppleThunderboltEDMSink 2.1.3
com.apple.driver.AppleThunderboltDPOutAdapter 3.1.7
com.apple.driver.AppleSMBusPCI 1.0.12d1
com.apple.kext.AMDSupport 1.2.4
com.apple.AppleGraphicsDeviceControl 3.6.22
com.apple.iokit.IOFireWireIP 2.2.6
com.apple.driver.AppleHDAController 2.6.3f4
com.apple.iokit.IOHDAFamily 2.6.3f4
com.apple.driver.IOPlatformPluginLegacy 1.0.0
com.apple.driver.IOPlatformPluginFamily 5.7.1d6
com.apple.driver.AppleUSBAudio 2.9.5f8
com.apple.iokit.IOAudioFamily 1.9.7fc2
com.apple.kext.OSvKernDSPLib 1.14
com.apple.driver.AppleSMC 3.1.8
com.apple.driver.AppleGraphicsControl 3.6.22
com.apple.driver.AppleBacklightExpert 1.0.4
com.apple.iokit.IONDRVSupport 2.4.1
com.apple.driver.AppleSMBusController 1.0.12d1
com.apple.iokit.IOGraphicsFamily 2.4.1
com.apple.driver.AppleThunderboltDPInAdapter 3.1.7
com.apple.driver.AppleThunderboltDPAdapterFamily 3.1.7
com.apple.driver.AppleThunderboltPCIDownAdapter 1.4.5
com.apple.driver.AppleUSBMultitouch 240.9
com.apple.iokit.IOUSBHIDDriver 660.4.0
com.apple.driver.AppleUSBMergeNub 650.4.0
com.apple.driver.AppleUSBComposite 656.4.1
com.apple.driver.AppleThunderboltNHI 2.0.1
com.apple.iokit.IOThunderboltFamily 3.3.1
com.apple.iokit.IOUSBUserClient 660.4.2
com.apple.iokit.IOFireWireFamily 4.5.5
com.apple.iokit.IO80211Family 640.36
com.apple.iokit.IOEthernetAVBController 1.0.3b4
com.apple.driver.mDNSOffloadUserClient 1.0.1b5
com.apple.iokit.IONetworkingFamily 3.2
com.apple.iokit.IOAHCIFamily 2.6.5
com.apple.iokit.IOUSBFamily 683.4.0
com.apple.driver.AppleEFINVRAM 2.0
com.apple.driver.AppleEFIRuntime 2.0
com.apple.iokit.IOHIDFamily 2.0.0
com.apple.iokit.IOSMBusFamily 1.1
com.apple.security.sandbox 278.11.1
com.apple.kext.AppleMatch 1.0.0d1
com.apple.security.TMSafetyNet 7
com.apple.driver.AppleKeyStore 2
com.apple.driver.DiskImages 371.1
com.apple.iokit.IOStorageFamily 1.9
com.apple.iokit.IOReportFamily 23
com.apple.driver.AppleFDEKeyStore 28.30
com.apple.driver.AppleACPIPlatform 2.0
com.apple.iokit.IOPCIFamily 2.9
com.apple.iokit.IOACPIFamily 1.4
com.apple.kec.pthread 1
com.apple.kec.corecrypto 1.0

Looks like the Open Source USB 3.0 driver GenericUSBXHCI is causing this. I'd suggest uninstalling it.

Bug Report - Some items in your iTunes Library ... because the file could not be found.

10.6 and this is still this is a problem?!?!?!?!
Not like this is an obscure issue only affecting a few noobs. Google returns 11,200 results on this issue!t'
Can we PLEASE at least allow the list of broken files to be dumped as a text file so I can find them manually! guess not,
I'll just have to get out a pencil and write down 100 songs to spend my saturday looking up and fixing. Or I could let my wife purchase 100 songs she already has whenever this comes up...
What's really infurating is that non-technical wife thinks this means she must go to the iTunes store and buy them again. Is it just coincidence that this only happens to songs that we ripped from the CD with iTunes? Hmmmm?....
what follows is for the programmers, please make sure this get's to the development group.
iTunes is the only music library manager, Media player was not even activated.
iTunes is configured to "Keep folder organized", "Copy files to folder when adding"
this has been a recurring issue since iTunes 9.x for us
The issue is persisted accross system and library rebuilds.
some of the same songs recurr but most of the time the list differs.
Library survived transfer to new computer and back for a system rebuild (new hdd) w/o this issue.
I'm guessing 100 songs is an arbitrary limit for error reporting.
Songs seem to get lost for the following reasons.
Track number added to filename
Spelling of some tags like Album, Artist, Title differ in iTunes library and the file path !!!!
Only seems to happen to mp3 files.
My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Would love a bug number and feedback chanel on this.

The missing file thing happens when files are no longer where iTunes expects to find them. Possible causes are that you or some third party tool has moved, renamed or deleted the files, or that the drive they live on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout, or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files in a relatively sensible structure, then you should be able to use my FindTracks script to reconnect them to iTunes .
Although you say you haven't used Media Player it can be raised as a background process by visiting enabled web sites. Possibly worth you reviewing this post: Getting iTunes & Windows Media Player to play nicely
jerunamuck wrote:
...My suspicion is that iTunes is downloading meta data from the store and updating the mp3 tags and iTunes Music Library.xml then predicting the new file location without actually moving the file to that new location. I've enabled insert/update auditing on the NTFS folder to see if that provided any new info. I'm also capturing iTunes Music Library.xml so I can compare it to the new one WHEN this happens again and see if there is a pattern there.
Unlike Windows Media player iTunes doesn't have a feature to automatically update tag data, although it will sometimes spot when a 3rd party program has (say during playback) and then update its own copy of the data. The iTunes (Music) Library xml file is provided for querying by third party software and is rewritten every time there is a change to the library, but is otherwise of no relevance to iTunes. The library is maintained in the iTunes Library.itl file. I suppose what could be happening is that iTunes issues a command to the file system to move a file based upon its tag, updates its knowledge of where the file is supposed to be, but the OS fails to move the file for some reason. Alternatively everything could go as planned, but iTunes could fail to get the updated copy of the library written out to disk so next time you start you get the previously stored locations.
I have ideas of my own about the best way to organise my media, but I'm quite familiar with the way iTunes does it. It might be interesting to see the details of one of the broken tracks, the path iTunes thinks it is at, and the actual path, in case there is anything that can be deduced.
Apple don't run an open bug tracking system so you won't be able to follow reports/progress based on a bug number. You can drop a line to iTunes Feedback or get a free Apple Developer account and submit a bug report report there.
tt2

Bug report: Mail sends messages with empty bodies

Over the last year, I have experienced a particularly irritating bug in Mail.app at least a dozen times. I finally have a good idea as to what causes it.
The problem involves long email messages (often with attachments) that end up being sent with blank bodies (and no attachments). Even the copy in the "Sent" folder ends up blank, and several minutes or hours of work vanishes into thin air, not to be seen ever again.
I finally realized that this bug only occurs when sending mail through our work SMTP server while outside the work firewall, and only as a result of a certain sequence of events. Here is what happens:
When we connect to our work SMTP server from outside the local network and without going through the VPN, the SMTP server requires password authentication. If the current SMTP selection in Mail.app is the one that does not require authentication, the SMTP server rejects the message. At that point, Mail.app opens the email I am trying to send and brings up a modal dialog that says "Cannot send message using the server xxx.xxx -- The server response was: xxx@xxx relaying prohibited. You should authenticate first." The dialog also presents a drop-down list of SMTP server choices. I choose the password-authenticated version of the server and then click on "Use Selected Server" to send the message.
This works almost all the time, but on occasion it ends up sending a blank message! If I have a long email, particularly with attachments such as PDFs that are rendered in the body of the message, it takes a few seconds for the mail message to be rendered underneath the modal dialog box. Since I am used to this STMP rejection behavior, sometimes I am too fast to choose another STMP server from the list and click on "Use Selected Server" before the mail message is rendered on screen! The result, invariably, is a blank email message that gets sent.
I guess what is happening is that when the STMP server rejects the message and hands it back to Mail.app, the message gets copied into a buffer in order to be displayed on screen. Selecting another server and resending it immediately (before the message is copied into the buffer completely) causes the message body to get trashed.
I hope that this description is adequate for Apple QA folks to replicate and isolate the problem (and hopefully fix it). One solution (although not the most elegant one) would be to disable the "Use Selected Server" action until the message is copied into the buffer and rendered on screen.

This could be related to another bug reported here recently:
E-mail looses all images if mail server doesn't accept outgoing email...
You cannot count on Apple looking into this or even noticing it if you report it here, so I suggest you the same I suggested in the other thread, i.e. report it in one of the following places:
http://www.apple.com/macosx/feedback/
http://developer.apple.com/bugreporter/

BUG REPORT: new 10g Driver throws SQLExcpetion

So far, i just replaced my old ORACLE JDBC driver jar file with a new version. Of course, i use the classes12.jar to be used by JDK 1.3. This worked for all the 9.xxx Drivers. Now, i tried to use the classes12.jar from the new "10g" Driver (10.1.0.2.0) but it doesn't work anymore. The first simple SELECT statement throws this error:
java.sql.SQLException: Typlänge größer als Höchstwert
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:124)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:161)
     at oracle.jdbc.driver.DatabaseError.check_error(DatabaseError.java:884)
     at oracle.jdbc.driver.T4CMAREngine.buffer2Value(T4CMAREngine.java:2230)
     at oracle.jdbc.driver.T4CMAREngine.unmarshalUB2(T4CMAREngine.java:1047)
     at oracle.jdbc.driver.T4CTTIdcb.receiveCommon(T4CTTIdcb.java:111)
     at oracle.jdbc.driver.T4CTTIdcb.receive(T4CTTIdcb.java:94)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:590)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:111)
     at oracle.jdbc.driver.T4CStatement.execute_for_describe(T4CStatement.java:350)
     at oracle.jdbc.driver.OracleStatement.execute_maybe_describe(OracleStatement.java:895)
     at oracle.jdbc.driver.T4CStatement.execute_maybe_describe(T4CStatement.java:382)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:985)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1124)
For the simple select statement:
select REF_CLASS, REF_CODE, REF_TEXT_DE from refset order by REF_CLASS,REF_CODE
so, nothing special. Going back to the last 9.x driver, it works again. Is the 10g driver knwon to be buggy?
Is there an official bug report web page on the ORACLE site (similar to the sun Java bug database)?

Hi all,
I am seeing following exception while using Oracle 10.2.0.3 base release with WebSphere 6.1.0.9.
------Start of DE processing------ = [2/3/08 12:59:14:698 CST] , key = java.sql.SQLException com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery 1315
Exception = java.sql.SQLException
Source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
probeid = 1315
Stack Dump = java.sql.SQLException: ORA-00942: table or view does not exist
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:331)
     at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:288)
     at oracle.jdbc.driver.T4C8Oall.receive(T4C8Oall.java:745)
     at oracle.jdbc.driver.T4CStatement.doOall8(T4CStatement.java:207)
     at oracle.jdbc.driver.T4CStatement.executeForDescribe(T4CStatement.java:801)
     at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1039)
     at oracle.jdbc.driver.T4CStatement.executeMaybeDescribe(T4CStatement.java:841)
     at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1134)
     at oracle.jdbc.driver.OracleStatement.executeQuery(OracleStatement.java:1274)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery(WSJdbcStatement.java:1381)
     at com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.executeQuery(WSJdbcStatement.java:754)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:418)
     at com.filenet.engine.context.ServerCallContext._getDBContext(ServerCallContext.java:611)
     at com.filenet.engine.context.ServerCallContext.getDBContextFromJNDIValues(ServerCallContext.java:783)
     at com.filenet.engine.dbpersist.DBContext.determineDatabaseType(DBContext.java:380)
     at com.filenet.engine.gcd.GCDDBPersistence.<init>(GCDDBPersistence.java:135)
     at com.filenet.engine.gcd.GCDPersistence.getGCDPersistence(GCDPersistence.java:171)
     at com.filenet.engine.gcd.GCD.initialize(GCD.java:226)
     at com.filenet.engine.gcd.GCD.domainAvailable(GCD.java:183)
     at com.filenet.engine.gcd.GCD.isDomainAvailable(GCD.java:119)
     at com.filenet.engine.gcd.GCD.getContextInfo(GCD.java:142)
     at com.filenet.engine.init.StartupUtility.start(StartupUtility.java:136)
     at com.filenet.engine.init.StartupUtility.access$000(StartupUtility.java:39)
     at com.filenet.engine.init.StartupUtility$1.run(StartupUtility.java:68)
     at java.security.AccessController.doPrivileged(AccessController.java:274)
     at javax.security.auth.Subject.doAs(Subject.java:573)
     at com.ibm.websphere.security.auth.WSSubject.doAs(WSSubject.java:168)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:64)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
     at java.lang.reflect.Method.invoke(Method.java:615)
     at com.filenet.apiimpl.util.J2EEUtilWS.doAs(J2EEUtilWS.java:207)
     at com.filenet.engine.context.CallState.doAsSystem(CallState.java:385)
     at com.filenet.engine.init.StartupUtility.startASSystem(StartupUtility.java:63)
     at com.filenet.engine.jca.impl.ConnectionFactoryImpl.start(ConnectionFactoryImpl.java:120)
     at engine.EngineInit._init(EngineInit.java:60)
     at engine.EngineInit.init(EngineInit.java:132)
     at javax.servlet.GenericServlet.init(GenericServlet.java:256)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:190)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.init(ServletWrapper.java:317)
     at com.ibm.ws.webcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:1142)
     at com.ibm.ws.wswebcontainer.servlet.ServletWrapper.initialize(ServletWrapper.java:150)
     at com.ibm.wsspi.webcontainer.extension.WebExtensionProcessor.createServletWrapper(WebExtensionProcessor.java:99)
     at com.ibm.ws.webcontainer.webapp.WebApp.getServletWrapper(WebApp.java:787)
     at com.ibm.ws.webcontainer.webapp.WebApp.initializeTargetMappings(WebApp.java:467)
     at com.ibm.ws.webcontainer.webapp.WebApp.commonInitializationFinish(WebApp.java:304)
     at com.ibm.ws.wswebcontainer.webapp.WebApp.initialize(WebApp.java:285)
     at com.ibm.ws.wswebcontainer.webapp.WebGroup.addWebApplication(WebGroup.java:88)
     at com.ibm.ws.wswebcontainer.VirtualHost.addWebApplication(VirtualHost.java:157)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApp(WebContainer.java:655)
     at com.ibm.ws.wswebcontainer.WebContainer.addWebApplication(WebContainer.java:608)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.install(WebContainerImpl.java:335)
     at com.ibm.ws.webcontainer.component.WebContainerImpl.start(WebContainerImpl.java:551)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.start(ApplicationMgrImpl.java:1312)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.fireDeployedObjectStart(DeployedApplicationImpl.java:1129)
     at com.ibm.ws.runtime.component.DeployedModuleImpl.start(DeployedModuleImpl.java:569)
     at com.ibm.ws.runtime.component.DeployedApplicationImpl.start(DeployedApplicationImpl.java:814)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl.startApplication(ApplicationMgrImpl.java:965)
     at com.ibm.ws.runtime.component.ApplicationMgrImpl$AppInitializer.run(ApplicationMgrImpl.java:2131)
     at com.ibm.wsspi.runtime.component.WsComponentImpl$_AsynchInitializer.run(WsComponentImpl.java:341)
     at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1469)
Dump of callerThis =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
==> Performing default dump from com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
This is a FFDC log generated for the Default Resource Adapter from source = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement.pmiExecuteQuery
The exception caught = java.sql.SQLException: ORA-00942: table or view does not exist
SQL Error Code is 942 SQL State is = 42000
Operating System = Windows Server 2003 5.2 build 3790 Service Pack 2 x86
Classpath = C:\Program Files\IBM\WebSphere\AppServ\profiles\AppSrv02/properties;C:/Program Files/IBM/WebSphere/AppServ/properties;C:/Program Files/IBM/WebSphere/AppServ/lib/startup.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/bootstrap.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/j2ee.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/lmproxy.jar;C:/Program Files/IBM/WebSphere/AppServ/lib/urlprotocols.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batchboot.jar;C:/Program Files/IBM/WebSphere/AppServ/deploytool/itp/batch2.jar;C:/Program Files/IBM/WebSphere/AppServ/java/lib/tools.jar
Ext dirs = C:\Program Files\IBM\WebSphere\AppServ\java\jre\lib\ext
Other related data. If null, nothing was passed in =
null
The Objects' instance variables are printed below recursively 2 levels deep =
Object type = com.ibm.ws.rsadapter.jdbc.WSJdbcStatement
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
Displaying FFDC information for wrapper hierarchy,
beginning from the Connection...
First Failure Data Capture information for
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
Transaction Manager global transaction status is
STATUS NO TRANSACTION (6)
Underlying Connection: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Key Object:
[B@14f414f4
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Connection Manager:
[ConnectionManager]@4ee24ee2
JNDI Name <FNGCDDS>
shareable <true>
ConnectionManager supports lazy association?
true
ConnectionManager supports lazy enlistment?
true
Handle is reserved? false
AutoCommit value tracked by handle: true
Detection of multithreaded access is:
DISABLED
Thread id:
null
Wrapper State:
ACTIVE
Parent wrapper:
null
Child wrapper:
null
# of Child Wrappers 1
Child wrappers:
com.ibm.ws.rsadapter.jdbc.WSJdbcStatement@53385338
ConnectionRequestInfo:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbManagedConnectionImpl@3f023f02
ONE PHASE ENABLED
Database Type:
null
Transaction State:
NO_TRANSACTION_ACTIVE
Statement Cache Size (maximum):
10
Key:
[B@14f414f4
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Log Writer:
null
Subject:
null
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Counter of fatal connection errors for the ManagedConnectionFactory as of the most recent getConnection on this ManagedConnection:
0
Default AutoCommit:
true
Current AutoCommit:
true
AutoCommit reported by the JDBC driver:
true
Current Isolation:
READ COMMITTED (2)
Isolation level has changed? :
false
Support isolation level switching:
false
Isolation reported by the JDBC driver:
READ COMMITTED (2)
Catalog, IsReadOnly, or TypeMap has changed? :
false
Default Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Current Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Holdability value has changed? :
false
Holdability reported by the JDBC driver:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Thread ID:
null
Lazily enlisted in the current transaction? :
false
Underlying Connection Object: oracle.jdbc.driver.LogicalConnection@3dfc3dfc
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
Underlying PooledConnection Object: oracle.jdbc.pool.OraclePooledConnection@64ec64ec
oracle.jdbc.pool.OraclePooledConnection@64ec64ec
SQLJ Default Context: null
null
Is statement caching enabled? :
true
Fatal connection error was detected? :
false
Currently cleaning up handles? :
false
Last ConnectionEvent sent for this ManagedConnection:
com.ibm.ws.rsadapter.spi.WSConnectionEvent@3f583f58
Connection Handle: null
Event ID: UNKNOWN CONNECTION EVENT CONSTANT (0)
Exception: null
Driver version:
10.2.0.3.0
Database version:
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Production
With the Partitioning, OLAP and Data Mining options
Connection Event Listeners:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Interaction Metrics:
com.ibm.ejs.j2c.ConnectionEventListener@6f306f30
Maximum Handle List Size: 15
Handle Count: 1
Handles:
com.ibm.ws.rsadapter.jdbc.WSJdbcConnection@7c9e7c9e
null
null
null
null
null
null
null
null
null
null
null
null
null
null
State Manager:
com.ibm.ws.rsadapter.spi.WSStateManager@6ec46ec4
XA Resource:
null
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbSpiLocalTransactionImpl@7c827c82
Connection:
oracle.jdbc.driver.LogicalConnection@3dfc3dfc
ManagedConnection:
WSRdbManagedConnectionImpl@3f023f02
Detection of multithreaded access is:
DISABLED
ManagedConnectionMetaData:
null
Statement Cache:
com.ibm.ws.rsadapter.spi.CacheMap@6d486d48
Number of entries: 0
Maximum entries: 10
Number of buckets: 13
Maximum bucket size: 5
Number of discards: 0
BUCKET SIZE PREV NEXT
000 000 013 013
001 000 013 013
002 000 013 013
003 000 013 013
004 000 013 013
005 000 013 013
006 000 013 013
007 000 013 013
008 000 013 013
009 000 013 013
010 000 013 013
011 000 013 013
012 000 013 013
013 LRU 014
014 MRU 013
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSConnectionRequestInfoImpl@345e345e
extention DS properties =
null
extention DS properties key =
0
useHetrogeneous =
false
changable CRI =
false
optimizeForGetUseCloseUsage =
false
User Name:
null
Password:
null
Isolation Level:
READ COMMITTED (2)
Catalog:
null
Is Read Only?
null
Type Map:
null
Cursor Holdability:
DEFAULT CURSOR HOLDABILITY VALUE (0)
Config ID: 0
Hash Code:
0
Support isolation switching on connection:
false
NoEnlistment:
false
ShareWithCMPOnly:
false
Handle type:
java.sql.Connection
TrustedContext_name:
null
TrustedContext_realm:
null
TrustedContext_userSecToken:
null
TrustedContext_originalUser:
null
trustedContextIdentityAttributesAreSet =
false
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSManagedConnectionFactoryImpl@63666366
Detection of multithreaded access is
DISABLED
Resource Adapter:
null
Hash Code:
-1131425938 (0xbc8fcf6e)
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
Database Type:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
Description:
null
InternalDataStoreHelper:
[email protected]8
Log Writer:
null
Performance Monitoring Instrumentation:
com.ibm.ws.pmi.server.modules.J2CModule@46cc46cc
Statement Cache Size (maximum):
10
Transaction Branches are set to be Loosely Coupled:
false
Counter of fatal connection errors on ManagedConnections created by this MCF:
0
Validate existing connections on cleanup after a fatal connection error is detected?
true
ResetConnectionByBackendDatabase:
false
Backend id checking is:
true
JMSOnePhaseOptimization:
false
Reauthentication:
false
newDBConnectionValidationEnabled:
false
connectionRetriesDuringDBFailover:
100
connRetryDurationDuringDBFailover:
3000
Connection Factory Type:
com.ibm.ws.rsadapter.jdbc.WSJdbcDataSource
Listing PropertyChangeListeners:
First Failure Data Capture information for
com.ibm.ws.rsadapter.spi.WSRdbDataSource@34003400
DataSource Implementation Class Name:
oracle.jdbc.pool.OracleConnectionPoolDataSource
DataSource Name:
null
DataStoreHelper:
com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper@3ebc3ebc
DataSource properties:
{enable2Phase=false, serverName=localhost, statementCacheSize=10, user=gcduser, dataStoreHelperClass=com.ibm.websphere.rsadapter.Oracle10gDataStoreHelper, URL=jdbc:oracle:thin:@localhost:1521:orcl, databaseName=orcl, selectMethod=direct, dataSourceClass=oracle.jdbc.pool.OracleConnectionPoolDataSource, password=******, portNumber=1521}
ONE PHASE ENABLED
Underlying DataSource Object: oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
oracle.jdbc.pool.OracleConnectionPoolDataSource@39703970
Counter of unique, modified DataSource configurations: 0
DynamicDSConfigManager
null
+Data for directive [defaultadapter] obtained. =
==> Dump complete for com.ibm.ws.rsadapter.DiagnosticModuleForAdapter = Sun Feb 03 12:59:15 CST 2008
Any Ideas?
Thanks in advance.
Regards,
Rajan

Submitting bug reports for linux player

hello,
we're in the process of improving the
feedback
form to better collect your input on the linux version of flash
player 9. while we are waiting for these form updates to be made,
please use the "Problem description" field near the top of the form
to provide additional information such as:
* distribution and version
* browser and version
* any mutant library configuration (other than those included
with distribution)
* camera/microphone type (if applicable)
this information will greatly help our QE team in reviewing
and reproducing your issues, which leads to issues getting fixed
faster.
thanks!
jennifer
(adobe's flash player program manager)

Anyone have any idea how to submit a bug report for Oracle XE.Posting bug description in this Forum should be enough.

[bug report] Built in email client: charset is alw...

I have to repost this bug report (originally submitted to http://discussion.forum.nokia.com/forum/showthread.php?t=117995 ), since no one replied.
My Nokia E50's built-in email client incorrectly displays multipart messages, i.e. plaintext+html. The program prefers html part over plaintext, but always displays it in ISO-8859-1 codepage, regardless of the "Content-Type: text/html; charset=CHARSET" modifier in the message. For languages other than English this causes total message garbling. Such plaintext+html multipart messages are very widespread.
I guess that all Nokia Symbian smartphones are affected.
Additional information.
The X-Mailer string: EPOC Email Version 2.10
*#0000#:
V 07.36.0.0
07-09-2007
RM-170
Nokia E50
By the way, should I report the bug to Nokia Care rather than Nokia Support forums?

Its funny that you mention BCC'ing because thats the only semi-solution I could come up with as well using the default email client. Also, Mobile Documents is a good 3rd party solution. It has its own limitations, but it will sync to the proper folders. I use it when I don't feel like going through the convoluted BCC process.
If anyone from Nokia programming can see this, full IMAP sync functionality would certainly be a welcome addition in future updates to the email program. Those of use using the same email account on many different devices consider it a necessity.

Before I file another bug report...

Is it just my iPod touch that now when using Clock > Timer adds a spurious 54 seconds on to however many minutes I've selected? Not sure whether this was when I installed 1.1.3 or the new apps as that was in quick succession.
Does anyone else get this?
cheers
mrtotes

Oh
Thanks to you all for checking for me.
Well I've just restored version 1.1.3 with nil change to the original defect. To be honest it doesn't bother me enough to worry about it too much but it is odd. As it's just me I won't get to visit my favourite bookmark; +iPod touch+ feedback, to fill a bug report this time.
mrtotes

Bug report - font disappear in the component tree

bug report - font disappear in the component tree
thanks
from Peter ([email protected])

Any more information? Does this always happen? Sometimes?
Does it depend on the font used in Eclipse?
Does it depend on the Eclipse theme used?
What distro/version of Linux are you using? What window manager?

Solaris8 and 9 (possibly 7) /dev/poll driver bug report.

Hello,
I'd like to report a bug in the solaris 8 and 9 /dev/poll driver (poll(7d)).
As i do not have a support account with sun or anything like that, there
seems to be no other way to do that here (which is of course a very sad
thing).
Bug details:
The /dev/poll device provides an ioctl-request (DP_ISPOLLED) for checking
if a particular filedescriptor is currently in the set of monitored
filedescriptors for that particular /dev/poll fd set (open /dev/poll fd).
A quote from the documentation of the poll(7d) manual page taken from
Solaris9:
"DP_ISPOLLED ioctl allows you to query if a file descriptor is already in
the monitored set represented by fd. The fd field of the pollfd structure
indicates the file descriptor of interest. The DP_ISPOLLED ioctl returns 1
if the file descriptor is in the set. The events field contains the
currently polled events. The revents field contains 0. The ioctl returns 0
if the file descriptor is not in the set. The pollfd structure pointed by
pfd is not modified. The ioctl returns a -1 if the call fails."
It says that when you query for an filedescriptor which is currently being
monitored in the set, that it would return 1, and change the events field of
the pollfd structure to the events it's currently monitoring that fd for.
The revents field would be set to zero.
However the only thing which actually happens here, is that FD_ISPOLLED
returns 1 when the fd is in the set and 0 if not. When the fd is in the
set, when FD_ISPOLLED returns 1, the events field remains unmodified, but
the revents field gets changed.
A small sample code to illustrate:
#include <stdio.h>
#include <unistd.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <sys/devpoll.h>
main() {
struct pollfd a;
int dp_fd = open("/dev/poll", O_WRONLY);
a.fd = 0; /* stdin */
a.events = POLLIN; /* we monitor for readability, POLLIN=1 */
a.revents = 0;
write(dp_fd, &a, sizeof(a));
a.fd = 0;
a.events = 34; /* filled in with bogus number to show malfunctioning */
a.revents = 0;
printf("DP_ISPOLLED returns: %d\n", ioctl(dp_fd, DP_ISPOLLED, &a));
printf("a.fd=%d, a.events=%hd, a.revents=%hd\n", a.fd, a.events,
a.revents);
According to the documentation of /dev/poll and namely DP_ISPOLLED this
program is supposed to print the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=1, a.revents=0
However it prints the following:
DP_ISPOLLED returns: 1
a.fd=0, a.events=34, a.revents=1
You can take any number instead of '34' and it will simply remain untouched
after the DP_ISPOLLED ioctl-request.
I hope it's clear now that the solaris8 and solaris9 (and probably solaris7
with /dev/poll patch too) DP_ISPOLLED implementation is broken.
This bug is also easily illustrated by looking at the solaris8 kernel sourcecode:
<snippet osnet_volume/usr/src/uts/common/io/devpoll.c:dpioctl()>
case DP_ISPOLLED:
pollfd_t pollfd;
polldat_t *pdp;
if (pollfd.fd < 0) {
mutex_exit(&pcp->pc_lock);
break;
pdp = pcache_lookup_fd(pcp, pollfd.fd);
if ((pdp != NULL) && (pdp->pd_fd == pollfd.fd) &&
(pdp->pd_fp != NULL)) {
pollfd.revents = pdp->pd_events;
if (copyout(&pollfd, (caddr_t)arg,
sizeof(pollfd_t))) {
mutex_exit(&pcp->pc_lock);
DP_REFRELE(dpep);
return (set_errno(EFAULT));
*rvalp = 1;
</snippet>
its' clearly visible that the code writes the current monitored events to
the revents field:
'pollfd.revents = pdp->pd_events;'
and that it doesnt set revents to zero.
It's funny to see that this has been like this since Solaris8 (possibly 7). That means nobody ever used DP_ISPOLLED that way or people were simply to lazy to file a bug report.
Another funny thing related to this. is that Hewlett-Packard did seem to know about this. Since HP-UX11i version 1.6 they also support /dev/poll. From their manual page i ll quote some sentences from their WARNING session:
"The ioctl(DP_ISPOLLED) system call also returns its result in the revents member of the pollfd structure, in order to be compatible with the implementation of the /dev/poll driver by some other vendors."
Hopefully this will get fixed.
I also like to reexpress my very negative feelings towards the fact that you're not able to file bug reports when you do not have a support contract. Ridiculous.
Thanks,
bighawk

Have I mentioned how much i love my playbook now Great job on os 2.0

Bug report: Naming a Bin after creating it with drag'n'drop

There seems to be a small bug when giving a newly created bin a name after creating it by drag'n'drop of several clips onto the "New Bin" icon.
To reproduce:
Select some clips in your project browser
Drag them onto the New Bin button
A new bin is created with the clips in it
- the bin name for it appears to be selected, and editable - just as if you had created a new empty bin by clicking the New Bin button
- type in a new name - it accepts the name fine, now press enter.
- your new name disappears, and *now* you are really in the mode to edit the bin name
- type your name again, and it works.
Work around:
When creating new bins by using drag'n'drop of clips onto the New Bin button, first press enter once to enter into the proper edit mode before giving the bin a new name.
(is there a better place to file bug reports?)
Version 6.0.1 (014 (MC: 264587))
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro5,1
Processor Name:          Quad-Core Intel Xeon
Processor Speed:          2.8 GHz
Number Of Processors:          1
Total Number Of Cores:          4
L2 Cache (per core):          256 KB
L3 Cache:          8 MB
Memory:          8 GB
Processor Interconnect Speed:          4.8 GT/s
Boot ROM Version:          MP51.007F.B03
SMC Version (system):          1.39f11
SMC Version (processor tray):          1.39f11
OS X 10.6.8

Er, just answered my question about bug reports by reading the "read this before posting" link above
But I'll leave this here for the work-around in case anyone else needs it.

Bug Report: Process Version sometimes reports "nil"

Similar Messages

Maybe you are looking for