Bug Report: Switching Formats Can Lock Up the FS7

Through extensive testing, I've found the bad combination of menu settings that cause the FS7 to lock up.
Apparently, it is impossible to switch from 4K to HD if the output menu is set to QFHD. I did 5 trials of attempting to change the output format within the XAVC-I CODEC, but the camera didn't reboot and the time remaining on the cards was unchanged at 7 and 15 minutes for my two cards.
I had a hunch that my setup is having this issue because I'm driving a Shogun recorder and many other folks are not.
My HDMI out was set to QFHD during these failed attempts.
I decided to set the output to 1920x1080 SDI, then go change the format to 1080P and it worked. The only oddity I observed was that the menu UI became very sluggish, with menus painting v-e-r-y slowly. But the time remaining updated to the correct value and I could power the camera down without having to remove battery.
The lethal combination is having HDMI set to QFHD when trying to set the format to a lower resolution than 4K. This is with the latest firmware update.

Hey Mark are you on the 2.x firmware? I had this issue with the 1.0 or 1.1 but have not had it since the 2.0 . Hope you get it fixed,Robert

Similar Messages

Bug(?) with iCal - Can not change the event time

Hello all,
First of all, let me preface my question by admitting that I'm new to the Mac world, transitioning from MS environment. So please, be a bit patient
Now, on to my problem:
I have created events in iCal and I can not change the time for any event. The time that's always displayed is 15:54! I have checked the time zone setting to on/off to se if it makes a difference, but to no avail. I have also gone into preferences and under the General Tab, the Day starts at and the Day ends at: show three (3) selections; Noon, 15:54, Midnight !!???
I have changed the Show hours at a time, to see if that makes a difference, but it does not.
To add to the above mystery, I have created events with my mobile SonyEricsson K850i, with the correct time(s), date, etc., synchronized with iCal and the time changed to 15:54!!
This is a new MacBook Pro, with the latest patches! For some reason the iCal applet does not allow any changes to the time.
Any suggestions/help will be greatly appreciated.

Hi
I am having the exact same problem you discussed and was wondering whether you ever found a solution.
Cheers,
Anna

Switcher ?Can you change the size of the screen resolution on the Macbook?

I'm really interested in buying a Macbook. This will be my first Mac. I love the way they look and feel. I'm concerned with the size of everything on the Macbook. The overall size of the fonts in applications such as word, or safari was too small for me.
Can you change the size of the screen resolution in OSX like you can on Windows? In Windows doing this makes everything visually bigger.
Please say you can. I'm really wanting the Macbook as it would be great for for a student like me.
Thanks in advance.
Hopefully a Macbook 13" 2.0 Superdrive soon.
Hopefully a Macbook 13" 2.0 Superdrive White soon.

With an LCD, if you change the resolution, things will be bigger, but blurrier.
You can however keep the resolution of the LCD at its native resolution, giving the maximum picture quality, and then use tools, such as Tinkertool…
http://www.versiontracker.com/dyn/moreinfo/macosx/11967
… to modify the font display size of items such as the menu bar, Finder labels etc etc.

Bug report: crazy keyboard (caps lock flashing)

Hi all!
I had the problem of the "crazy keyboard" and I think I understand the cause.
Mac model: Macbook pro MB134LL/A
OS: Snow leopard 10.6.5 with latest updates
Problem: sometimes the caps lock button flash and the trackpad freezes.
I read similar problems in the forum, without a solution.
I have an admin account on my mac and I installed the software "mobile partner" to manage mobile connections with an internet key huawei e176.
Now I have version 16.001.17.04.51 for the mobile partner, and version 4.23.03.00 for the key drivers.
The "crazy keyboard" problem can happen with these versions and with previous versions too.
I noticed that in "system preferences->network->advanced settings of the installed HUAWEIMobile-Modem" the drivers are set by default to generic apple modem. So I changed with the "huawei mobile connect - 3G modem" drivers but sometimes this preference automatically changes back to generic apple modem.
When the keyboard goes crazy I see that the drivers are set to generic apple modem.
"Crazy keyboard" appears only after installing the internet key, so I think that the cause of the problem is the automatic change of the modem drivers.
How to solve the problem?Change the admin account, so to avoid changes?
Thank you

Javier,
I appreciate the feedback.
I'll try to provide the requested information:
$ cat /etc/release:
Solaris 10 1/06 s10s_u1wos_19a SPARC
Copyright 2005 Sun Microsystems, Inc. All Rights Reserved.
Use is subject to license terms.
Assembled 07 December 2005
X server:
Xsun (at least that's what shows up as the process name)
Input Method framework:
Nothing outside of the OS. The Solaris 10 OS Turkish localization packages were installed along with some OS patches and the Turkish USB keyboard plugged in.
Thank you,
Don
Edited by: 924089 on Apr 3, 2012 4:38 PM
Here’s the problem as best I can explain it with the help of the “/usr/openwin/demo/xev” tool.
With the “Caps Lock” key engaged:
Press and release of the (dotted) “i” key WRONGLY gives uppercase (dotless) “I” letter with “keycode = 59” and “keysym = 0x49”.
Press and release of the (dotless) “ı” key correctly gives uppercase (dotless) “I” letter with “keycode = 19” and “keysym = 0x49”.
Disengaging the “Caps Lock” key:
Holding down the “Shift” key:
Press and release of the (dotted) “i” key correctly gives uppercase (dotted) “İ” letter with “keycode = 59” and “keysym = 0x2a9”.
Press and release of the (dotless) “ı” key correctly gives uppercase (dotless) “I” letter with “keycode = 19” and “keysym = 0x49”.
Summary:
The delivery of the keysym value of 0x49 seems to be wrong for the “Caps Lock” + “i” keys combination. (Shouldn’t it be 0x2a9?)
I have learned that user 925353 has initiated SR: 3-5545975463 reporting this problem.
Edited by: 924089 on Apr 4, 2012 6:30 PM

Bug report: Old threads showing up at the top of the list

As a professional web developer I must say that these forums are a disgrace. I wouldn't dare sell such a product.

It happens when a spam post is removed, as in the Catering thread, http://forums.adobe.com/thread/285152?tstart=0, in the Print Design forum, http://forums.adobe.com/community/design_development/printdesign?view=discussions&start=0, where it topped the list for a while with a 1 year old post by Neil after my reporting.

HP Officejet 7500A Wide Format - Can't reset the paper size - won't print!!!

I have a new HP Officejet 7500A Wide Format All-in-one printer. I love it and have had no problems with it...until now. The other day I went into Photoshop and printed a 4x6 photo and now my printer will not allow me to print on 8.5X11. I have checked the paper size in Photoshop, Word, Excel, Acrobat...everything I used that day, but it all shows "letter" size paper in the properties. I also checked the printer utilities...letter size paper is selected.
But when I try to print, the printer and the computer both give me a "paper mismatch" error and my only option is to change the paper or cancel. I went back into photoshop again and was able to print a 4x6 photo again - once I put in 4x6 paper - but then I changed it back to an 8.5X11 size photo sheet and tried to print on letter size paper and..."paper mismatch'.
I changed the printer back to factory settings. Nothing. I just had to reset up my printer on my network, but it still won't print. I tried to re-install the printer software from the installation disk, but it won't install. It says "already installed".
HELP!!!!!! I honestly don't know what to do at this point!!!!!
Thanks in advance!!

I have struggled with a similer problem with my new 7500A. I've done all the things you did. I made sure I had all updates and the firm ware update. I spent time on the phone with a lady who meant well but clearly didn't know the product. I had a difficult time communicating with her. Her accent was in the way. This morning I realy didn't want to face another day of this struggle. As I walked into my studio I had a idea. Instead of going to the computer to try to solve my problem through menues, HP Customer Service and or communities. I went dirrectly to the printer. I turned the printer on, the little screen on the printer lit up I touched the arrow to go to the next screen of menus. I touched "Set Up" then scrolled down through the choices. I picked "Preferences". At the bottom of the list was.............. Media Width/Type Sensing (ON)............I promptly turned it (OFF) ......................I am printing as I was told I would be able to do prior to buying. I am not getting that anoying screen "Paper Mismatch" . The printer is printing now on my 12 x 12 stock regardless of the type. ie: cardstock, plain paper, colored paper, construction paper. I hope this helps some of you out there. Clearly HP was of "NO" help to me. I have read that others are installing HP 7000 drivers etc. I've solved the problem without going to those lengths, no thanks to HP.

What are the switches I can add to the subject line of an eprint email?

I see some commands listed here and there but nothing comprehensive in a single location. If it were a command line I would enter "eprint -?" to get the help text listing all available commands.

Hello Arkle,
I think you meant that you can leave the body blank and it will print. If you leave the subject line blank, ePrint may see the email as spam and reject it. ePrint jobs should always be sent with a subject, but can be sent without a body. I do not mean to correct you, but that confusion could cause some problems to arise.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Report conversion tool--Can we modify the query

Hi all,
I have some freehand SQL reports converted into WebI reports. I understand that report conversion tool, creates a new universe for each of the freehand SQL report. But if I try to edit the query, like add a filter condition, an error pops out.
Is it possible to edit the query if we convert freehand sql reports into webi reports?
Regards
Ash.

Hi,
Yes it is possible to edit the query for the converted free hand sql query.
If you see any problem while editing the SQL of the converted report, do a refresh once and try.
Adding query filter also works fine.
Issue from your end could also be due to security settings.i advise to revisit the security once and make sure all appropriate rights are available for the user.
Thanks,
Sri

Bug report: text does not update on the stage

I am not sure whether this has been reported:
I have several groups divs into one main group div. In these are images and text. I create a new group by copying elements from a previous group and then insert new text in the copied text box. The text does not update on the stage but is correct when I run the composition and also in the text panel.

Hi Hemanth.
I tried all day and is intermittent, why?, 'cause the numbers are now showing but the other texts not, this happen only on Chrome and Safari when the navigator screen increases size.
On Chrome:
On Firefox:
I discovered that the error appears only on the right side of the stage, if I move the buttons to center, the error disappears:
On Chrome (Fullscreen):
I have no idea of what is happening.

How about fixing the bug report submission page ?

I've been trying for I think the 11 time to submit a bugreport to bugreport.sun.com and each time,
the submission FAIL. And of course you loose everything you entered in the page.
Email to the address specified when it fail also FAIL.
rejected by the server for the recipient domain sun.comby userp1020.oracle.com. [156.151.31.79].
The error that the other server returned was:
550 5.1.1 <[email protected]>... User unknown
Please Fix, a bug report page that can't even submit simple text its ridiculous.
This is not the first time I have difficulties getting your site to work.

You're complaining to the wrong people.
Re: bug database does not work?
OTN forum admin are not responsible for the java bug reporting. They cannot fix what isn't theirs.
Locking this thread

Bug Report: The keyboard focus doesn't automatical...

Bug Report: When a conversation window opens, the focus doesn't automatically land in the chat entry text field.
Since the new interface for Skype was introduced officially in Skype 7.0, there is a bug with the system/keyboard focus for a new conversation window. When Skype is in "Split Window View" and each new conversation automatically pops up in a separate window, the system/keyboard focus doesn't land in the chat entry edit field. Instead, the user has to press Shift+TAB a couple of times, to move it there and reply to the chat message received. This especially problematic for screen reader users, who rely on keyboard navigation. This mainly occurs when a new conversation is started with an incoming message, but it sometimes occurs when moving the focus out of that conversation window and later back in it again (while it is still opened).
Steps to reproduce it:
1. From "View" menu, activate the "Split Window View", if it is not already enabled.
2. From Tools -> Options -> IM & SMS -> IM settings, enable "Open a new window when I receive a new message in Split Window View", if it is not already enabled.
3. From Tools -> Options -> Advanced, activate "Enable accessible mode", if it is not already enabled.
4. Activate the "Save" button, to save the changes.
5. Close all windows, related to Skype. You may keep only the main window opened.
6. Tell someone to send you a chat message. When the message arrives, Move the system focus to the conversation window in question, preferably with Alt+TAB. The system/keyboard will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should by default, but in some unknown place in the window.
7. Move the system/keyboard focus in the chat entry edit field and keep it there.
8. Switch to another window, preferably from another application.
9. With Alt+TAB, switch back to the window of the opened Skype conversation. There is a chance that the system/keyboard focus will not land in the chat entry edit field as it did in Skype 6.21 and earlier and as it should do by default, but again in some unknown place in the conversation window. But that is harder to reproduce.
Test environment:
- Operating system: Windows 8.1 Pro N, 64-bit, in Bulgarian with all locale settings set to "Bulgarian".
- Skype version: 7.0.0.102 for Desktop.

This is a known problem, but Skype have not given us an estimated time for a fix.
Traditionally, Skype updates have been roughly monthly, so we are due a new version sometime soon. Many of us here are hoping that is has a bunch of fixes for the UI, the focus problem being one of them.
Sean Ellis - uses Skype chat for serious work
Click here to read my blog post on Skype 7 and basic principles of GUI design

Where can we get the data for pre calculated reports

Hi,
i want to see the data for pre calculated reports (Reporting agent)
where can we get the data for pre calculated reports
Thanks & Regards,
Shaliny. M

Dear,
This feature of precalculating reports is to enhance the report performance. You will need to schedule this periodically, so that the report is fetched and cached. This allows faster retrieval of report data. Plz. understand that, this scheduling needs to run after every data load in the corresponding cube, so that, the latest data is cached, else the report data will be obsolete.
Thanks

Problem report: "Can't open the illustration. The image has already been specified, it cannot be changed."

I got a problem with my files I created in Illustrator CS6. After I closed them and wanted them to open up again, this problem report popped up:
"Can't open the illustration. The image has already been specified, it cannot be changed."
If I click OK, there is a white site with nothing on it. No object, no pictures, nothing.
The Illustrator file has still the right size and when I start ArtFiles to collect all used pictures and fonts it's no problem.
In Adobe Bridge there is still a preview of the original file and I can see what HAS to be placed in the file.
Can anybody help me out?
We had to make all the work again for a presentation but this is not the solution for this problem if that will happen in the future again.
Thank you in advance!

Thank you for your answer!
Actually there is no CS5 installed on our computers (no more). I will try to get one from our admin. Hope this will work! In the meantime we had this problem several times.

Can I save the custom graph format?

Hi All,
Can we save the custom graph format?
-- BIEE11.1.1.5.0
When using combined line-bar chart. I set the width of line chart to 3px.
This is thinner than the default setting.
I found the following section to setup/change for custom graph style formatting;
can we save the custom graph style formatting as a default?
Edit Graph View >
Graph properties > (T)Style > Graph Data
style and conditional Formatting
Style Formatting
Custom Formatted Positions:
Press +(Add button)
Thank you in advance,
Hiro

It worked with the following changes on the file dvt-graph-skin.xml:
<Graph>
     <SliceLabel>
     
     <ViewFormat decimalDigit="2" decimalDigitUsed="false"/>
     </SliceLabel>
     <Title>
          
          <GraphFont fontColor="#0" bold="true"/>
     </Title>
     <SeriesItems>
     <Series id="0" color="#ff0000" borderColor="#ff0000" lineWidth="3"/>
     <Series id="1" color="#00ff00" borderColor="#00ff00" lineWidth="1"/>
     </SeriesItems>
</Graph>

Bug report: Safari 5 fails to handle 8192 bit RSA certificates

Running Safari 5.1.7 on OS X 10.6.8 -- I haven't confirmed for the version of Safari running on 10.7 -- and trying to access a site over https that uses an 8192 bits large RSA cert causes Safari to bug out. It can't display the certificate details correctly, giving just a garbled text output, and even a buggy interface dialog, and manually trying to accept the certificate to get the website to load causes Safari to run in an endless loop, displaying the certificate warning anew, over and over, making it impossible to load the page. The exact same certificate details put in a 4096 bit cert works just fine.
Could anyone in the core dev team take a look at this? The number of sites making use of 8192 bit large certs is growing, and Safari is the only browser out there that can't handle it.
add.: it seems the problem sits at a more fundamental level than in Safari, possibly in some underlying framework - apparently several other applications in OS X fails with handling an RSA cert of 8192 bits size, as mentioned in this thread: https://discussions.apple.com/message/11728527
Possibly related: https://discussions.apple.com/message/3650856

Could anyone in the core dev team take a look at this? The number of sites making use of 8192 bit large certs is growing, and Safari is the only browser out there that can't handle it.
It might be worth registering (for free) as an Apple Developer:
http://developer.apple.com/programs/register/
... and then you can use the Bug Reporter to submit trackable bug reports:
http://developer.apple.com/bugreporter/

Bug Report: Switching Formats Can Lock Up the FS7

Similar Messages

Maybe you are looking for