Bug?: rxvt-unicode not allowed to run top, irssi and so on

Didn't know where to post this, please tell me if I'm on the wrong place.
With the latest RXVT-unicode-package (from comunity), I'm not allowed to run programs like top, screen and irssi in it. I've tried to install it on two diferent computers, with the same result:
[kristian@localhost ~]$ top
'rxvt-unicode': unknown terminal type.
[kristian@localhost ~]$ screen
Cannot find terminfo entry for 'rxvt-unicode'.
[kristian@localhost ~]$ irssi
setupterm() failed for TERM=rxvt-unicode: 0
Can't initialize screen handling, quitting.
You can still use the dummy mode with -d parameter
I've seen this happen with earlier binary pacages of "rxvt-unicode." I'm not quite sure how I fixed i back then. I might have built it myself with a PKGBUILD from this forum.
I can't find urxvt in "/usr/share/terminfo/". I think that's what causes these problems.
EDIT: Found a cvs-vesion on the aur that works. LINK

ozar wrote:http://bbs.archlinux.org/viewtopic.php?t=14317
It's the same bug. Witch means that we'll let this thread die. (I'll mention it in the thread you liked to, yust to be shure.)
Well, I think it's the same. But the file doesn't look blank...
Thanks

Similar Messages

I have just subscribed for a monthly billing for my acorbat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's

i have just subscribed for a monthly billing for my acrobat pro XI, the problem is i have clicked on the link on the email that have sent me to activate it but its still not allowing me to acess this and see my PDF's, how to i activate my new license?

Can you explain the problem in more detail - "not allowing me to access" isn't clear to me. If you get any errors, please give the full wording. If you just don't seem to have any useful functions under TOOLS, make sure you are NOT still running Adobe Reader.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

It is very difficult to navigate on facebook via safari. The IPAD does not allow other browsers to download and use it almost prevents the facebook app and the lack of scrolling the page.

I also have problems with Facebook on my iPad 2. I don't do a lot with Facebook and generally only post on my feed page. Sometimes hitting return on the keyboard enters the comment, sometimes not. Sometimes the comment will show on my iPad but if I revisit that page I find that the comment has disappeared. So I'd say that Facebook and my iPad are not totally compatible with each other.
I looked into Friendly and was about to purchase this free ap. But before I did I went to the Friendly web page for more info. There I found a page with users comments. One after another users complained about bugs with Friendly. The developers claimed a fix was coming but the user comments complained about the lack of response and support. One of the fixes suggested by the developers was to log out of Friendly then log back in. One user complained that doing this three times in ten minutes was not very helpful. Because of this I decided to avoid Friendly.
I did find a Facebook developed ap but it was for the iPhone. I presume that iPhone aps will work on the iPad but I'll wait until Facebook releases an iPad compatible ap. If there is an ap developed by Facebook for the iPad that I missed please let me know.

My apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

my apple id is not working on my ipad mini not allowing me to download ios7 and use some apps that need internet

You change the name of your ID at https://appleid.apple.com. See http://support.apple.com/kb/HE40.

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

I have an iPod 4s and I am trying to update to IOS 6.1.6. I keep trying to download but it will not allow me to click download and install. I have checked my storage and I have more than enough storage space available. Do you guys have any suggestions?

The only available, signed, iOS, for your iPod, is iOS 7.1. That's why you can't install iOS 6.1.6.

HT2798 I have a Mac OS 10.6.8 server in my classroom that I have networked to each student's account. How do I create a folder that allows them to place their finished assignments in it, but does not allow them to go in and remove anything from that fold

I have a Mac OS 10.6.8 server in my classroom that I have networked to student accounts on the iMacs in the room. How do I create a folder that allows studnts to place their finished assignments in it, but does not allow them to go in and remove anything from that folder?

You want a "Drop Box" style folder. You should be able to achieve this by creating a folder and giving it permissions similar to the "Drop Box" folder in your users Public Folder (i.e. write only permissions.)

"Prodcut allocation check not allowed for ATPcat.'BR' and application".

SAP Experts,
Whenever, I delete a delivery, I am seeing a pop-up message with the information message as "Prodcut allocation check not allowed for ATPcat.'BR' and application". Is this a standard functionality. We dont have ATP Check/Allocation check during delivery delete. How come we get this message ?
This is something curious. Can someone help me on this please ??
Thanks,
Babu Kilari

Delete the ATP category BR from check control for A (Sales document). It seems when you are deleting a delivery the transfer of requirements settings pop this
Let me know if you are successful
Regards,
Loknath

Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!

Last night my ipod touch(with iOS 5 beta 4) tried to reboot itself and is just not starting. it does not allow me to do anything and does not start till it's battery is exhausted. iTunes is not recognizing it. pls hlp............!!!!!!!!!!

Please post in the developer forum using your account credentials.
Stedman

HT4623 I bought a brand new ipad air, but I am not allowed to download ie. pages and keynotes for free, as promised?

I bought a brand new ipad air, but I am not allowed to download ie. pages and keynotes for free, as promised?

The free only counts for devices activated after September. So first you need to activate the iPad (go through all the set up stuff), then, using the same Apple ID you used to activate the iPad, go to the App store and search for Pages, etc. When you download them you should see them for free.
Being free is tied to the Apple ID used to activate a device. For example, I bought my iPod in June, so I'd need to pay for the apps, which is why they're not universally free in the app store.
After you activate the iPad it may take a little time for the app store to realize 'yeah, just got a new device, this purchase is free'. I've seen people say they go right in, see it for cost, then go back in a little bit and the apps are now free.

[SOLVED] rxvt-unicode not switching to fullscreen

Hi there.
I just installed rxvt-unicode and wanted to activate the fullscreen toggle.
I read on the ArchWiki that I needed the urxvt-fullscreen package from the AUR:
https://wiki.archlinux.org/index.php/Rx … Fullscreen
After installing it I set the switch key in my ~/.Xdefaults file (Wiki says ~/.Xresources
but all other sources said .Xdefaults so I don't think I'm doing anything wrong here),
but when I press it nothing happens. Is there a log file I can check?
Here's my ~/.Xdefaults:
! to match gnome-terminal "Linux console" scheme
! foreground/background
URxvt*background: #002B36
URxvt*foreground: #839496
! black
URxvt.color0 : #000000
URxvt.color8 : #555555
! red
URxvt.color1 : #DC322F
URxvt.color9 : #DC322F
! green
URxvt.color2 : #55FF55
URxvt.color10 : #55FF55
! yellow
URxvt.color3 : #B58900
URxvt.color11 : #B58900
! blue
URxvt.color4 : #268BD2
URxvt.color12 : #5555FF
! magenta
URxvt.color5 : #D33682
URxvt.color13 : #FF55FF
! cyan
URxvt.color6 : #2AA198
URxvt.color14 : #55FFFF
! white
URxvt.color7 : #AAAAAA
URxvt.color15 : #EEE8D5
! Native transparency
URxvt.transparent: true
URxvt.shading: 23
! Adjust the scrollbar
URxvt.scrollBar: false
! Adjust the geometry
URxvt.geometry: 100x33
! Remove borders
URxvt.borderLess: true
! Font and letter spacing
! I want antialiasing!!
URxvt*font: xft:Monospace:pixelsize=13:antialias=true
URxvt*letterSpace: -1
! Perl extensions
URxvt.perl-ext-common : default,matcher,tabbed
URxvt.urlLauncher : /usr/bin/chromium
URxvt.matcher.button : 1
! Fullscreen switch
URxvt.keysym.F11: perl:fullscreen:switch
Last edited by rubik (2012-09-02 07:36:53)

Ok, I didn't notice that message during install and it's not on the wiki, so...
But now that I added it to my .Xdefaults the behavior is the same (i.e. nothing happens).
! to match gnome-terminal "Linux console" scheme
! foreground/background
URxvt*background: #002B36
URxvt*foreground: #839496
! black
URxvt.color0 : #000000
URxvt.color8 : #555555
! red
URxvt.color1 : #DC322F
URxvt.color9 : #DC322F
! green
URxvt.color2 : #55FF55
URxvt.color10 : #55FF55
! yellow
URxvt.color3 : #B58900
URxvt.color11 : #B58900
! blue
URxvt.color4 : #268BD2
URxvt.color12 : #5555FF
! magenta
URxvt.color5 : #D33682
URxvt.color13 : #FF55FF
! cyan
URxvt.color6 : #2AA198
URxvt.color14 : #55FFFF
! white
URxvt.color7 : #AAAAAA
URxvt.color15 : #EEE8D5
! Native transparency
URxvt.transparent: true
URxvt.shading: 23
! Adjust the scrollbar
URxvt.scrollBar: false
! Adjust the geometry
URxvt.geometry: 100x33
! Remove borders
URxvt.borderLess: true
! Font and letter spacing
! I want antialiasing!!
URxvt*font: xft:Monospace:pixelsize=13:antialias=true
URxvt*letterSpace: -1
! Perl extensions
URxvt.perl-ext-common : default,matcher,tabbed,fullscreen
URxvt.urlLauncher : /usr/bin/chromium
URxvt.matcher.button : 1
! Fullscreen switch
URxvt.keysym.F11: perl:fullscreen:switch

BUG: Speed Dial "Not allowed"

When a number in Contacts is saved in the Outlook's format, e.g. +358 (400) 123 456, the Speed dial press-and-hold function result an error message "Not Allowed".
The workaround is to manually edit the number into unstructured string, e.g. +358400123456.
Hopefully, the Nokia-Microsoft alliance will help to iron out this kind of incompatibilities...

Pl. refer
/t5/Nseries-and-S60-Smartphones/N8-00-Speed-Dial-issue-with-formatted-numbers/m-p/810665/highlight/t...
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

MDX OLAP Universe does not allow for a Top 10 rank on measure.

Hello!
I am trying to Rank a measure by Top 10 in count on a MDX OLAP universe based on Web Intelligence. The rank works, however for all the zeros in the row values it gives the same rank and keeps on appending. I then tried to rank a measure with the MDX syntax in the SELECT statement of the measure itself. The syntax is as below:
<EXPRESSION>Rank([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember,
Order([0MATERIAL__0MATL_GROUP].[LEVEL01].CurrentMember.Level.Members
@Select(Exp Dem (Published)\Exp Dem (Published)),
@Prompt(u2018Top orBottomu2019,u2019Nu2019,{u2018DESCu2019,u2019ASCu2019},mono,constrained) ) )</EXPRESSION>
The XML is parsed because of the tags, however when using this measure in the query panel gives an error message for the prompt. Is there a way to rank a measure by Top 10 in the MDX statement above instead of the prompt for the Top/Bottom. I found the syntax in the OLAP Best practices guide.
Kindly revert for any possible solution. Any inputs are highly appreciated.
Thanks in advance!
Regards,
Vivek.
P.S.: I am specifically looking to Rank multiple measures by Top 10 count without displaying zeros / repetetive values.

Hi Ingo!
Thank you for responding! I have gone through the OLAP Universe best practices as suggested by the guide. However, the Ranking has an offset of repeating the ranks for same value metrics. So if I need a Top 10 and there are 3 zero values in the column, the ranking extends to Top 13. is there any way to hardcode this as a predefined filter in the Universe on the measure, which states that the rank stays limited to Top 10 irrespective of repeating values?
Kindly suggest if there is a work around for this!
Thanks in advance!
Regards,
Vivek.

What does 'init functions are not allowed in this objset' mean and how can it be fixed?

We have added some init functions to the beginning of the obj.conf file so that we can proxy off to Weblogic.
However when we try to run the Web server we get an error message 'init functions are not allowed in this objset'.
The syntax seems to be correct. Has anyone any idea how this can be fixed?

You are probably using iPlanet Web Server 6.0 or higher; starting with 6.0, the web server does not allow Init directives to appear on the obj.conf file. Instead, place your Init directives in the magnus.conf file.
This is documented in the Installation and Migration Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/ig/migrate.htm#20780 in the Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/pg/1-intro.htm#13565 and in the NSAPI Programmer's Guide at http://docs.iplanet.com/docs/manuals/enterprise/50/nsapi/02_objcn.htm#13097

My address bar does not autocomplete. Running Windows XP and it was working but not now. How do I start the autocomplete?

My computer crashed and it has been restored. I am running Windows XP and I did not re-install Firefox Aurora after the computer was restored with new motherboard and HDs. All of my software works, but the autocomplete does not. Firefox remembers my username for logging in and my password. It is just the autocomplete. I have to completely type in the website name. When I open the History and Bookmarks window, there are no entries. The yellow star in the address bar also does not work. When I click on it, nothing happens.

'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* On Windows you can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac you can open Firefox 4.0+ in Safe Mode by holding the '''option''' key while starting Firefox.
* On Linux you can open Firefox 4.0+ in Safe Mode by quitting Firefox and then going to your Terminal and running: firefox -safe-mode (you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
[[Image:FirefoxSafeMode|width=520]]
''Once you get the pop-up, just select "'Start in Safe Mode"''
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
Please report back soon.

Safari will not allow connection to your site and this is the only search engine on my Ipad

Could you please advise how I can download your Firefox search engine. I am not able to use anything other than Safari which is the pre-installed Apple search engine on my IPad.

Please read the follow thread, Apple does not allow Firefox to be installed in iPad.
http://support.mozilla.com/en-US/questions/500084

Bug?: rxvt-unicode not allowed to run top, irssi and so on

Similar Messages

Maybe you are looking for