BUG: "Save and compact" increases file size by 1KB each time?

Flash CS4
I noticed that when I do "save and compact" on a .fla file, it causes the file size to increase by 1KB each time--even when no changes were made.  Can this be fixed?

Yup. It works perfectly in CS3. Now the problem you will have is that you don't have CS3 installed. Even if you will save your files as CS3 format, you cannot (as far as i know) "save and compact" it as CS3, it will prompt that it must be converted from older version CS3 to CS4 and you end up with the same problem. Perhaps there is a setting to force CS4 to save and compact in CS3 version but i doubt it. The only way i know to solve it is save the file as CS3 format (But you will lose some XMP file info metadata, i'm not sure if that is necessary though) then close CS4, and open CS3 then "save and compact" it there. This is definitely a bug where some information might have been duplicated in the file's info or history. If you are lucky an adobe employee might be able to give you a solution to this or just confirm this bug.

Similar Messages

  • Using "done signing" increases file size 3 to 5 times !

    The new feature in Acrobat Reader 10.1.2 onwards is great - I can add a signature and a date.
    BUT if I use "done signing" the file size increases 3 to 5 times the original file size !  So I used File Save - and that worked well.
    Then I updated to 10.1.6 - and now the signature that I added is not "fixed" - it can be deleted or moved !
    We don't want to use digital signatures !!
    Any suggestions ?
    Thanks

    When you click the "Done Signing" button, the signature appearance and any text you added is flattened and becomes regular page contents and it won't be able to be moved or deleted as you describe. I also don't see a file size increase as you describe. Are you using an image for the signature and if so, how large is it (in bytes)?

  • I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    I imported an hour of video into iMovie HD and cut it down to a 33 sec clip, and emptied the trash.  When I save the project, the file size is 20Gb.  How can I save just the 33 sec clip?

    Non-destructive editing is an important feature of iMovie HD 6.
    iMovie preserves the entire copy of every clip you place into your movie in case you change your mind at a later stage.
    So, if you have cut out one minute from a 45 minute clip, iMovie will have stored two complete copies of that clip. This is why is helps to set import as 3-5 minute clips rather than one huge chunk. As DV runs at 13GB per hour your project files can get very big.
    One workaround is to complete the editing of a section of the movie, then export that to Quicktime: highlight the clip/s, choose Share-Quicktime, turn on Share selected clips only, and choose Full Quality from the pop-ip menu.
    Once you have saved the stand-alone clip to your hard drive, you can re-import it into your project using the File/Import command, and delete the original long clip/s from the project.

  • Nio ByteBuffer and memory-mapped file size limitation

    I have a question/issue regarding ByteBuffer and memory-mapped file size limitations. I recently started using NIO FileChannels and ByteBuffers to store and process buffers of binary data. Until now, the maximum individual ByteBuffer/memory-mapped file size I have needed to process was around 80MB.
    However, I need to now begin processing larger buffers of binary data from a new source. Initial testing with buffer sizes above 100MB result in IOExceptions (java.lang.OutOfMemoryError: Map failed).
    I am using 32bit Windows XP; 2GB of memory (typically 1.3 to 1.5GB free); Java version 1.6.0_03; with -Xmx set to 1280m. Decreasing the Java heap max size down 768m does result in the ability to memory map larger buffers to files, but never bigger than roughly 500MB. However, the application that uses this code contains other components that require the -xMx option to be set to 1280.
    The following simple code segment executed by itself will produce the IOException for me when executed using -Xmx1280m. If I use -Xmx768m, I can increase the buffer size up to around 300MB, but never to a size that I would think I could map.
    try
    String mapFile = "C:/temp/" + UUID.randomUUID().toString() + ".tmp";
    FileChannel rwChan = new RandomAccessFile( mapFile, "rw").getChannel();
    ByteBuffer byteBuffer = rwChan.map( FileChannel.MapMode.READ_WRITE,
    0, 100000000 );
    rwChan.close();
    catch( Exception e )
    e.printStackTrace();
    I am hoping that someone can shed some light on the factors that affect the amount of data that may be memory mapped to/in a file at one time. I have investigated this for some time now and based on my understanding of how memory mapped files are supposed to work, I would think that I could map ByteBuffers to files larger than 500MB. I believe that address space plays a role, but I admittedly am no OS address space expert.
    Thanks in advance for any input.
    Regards- KJ

    See the workaround in http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4724038

  • Help!..CS4 IS INCREASING FILE SIZES.

    Hi all
    Wondered if anyone has had a problem with increased files sizes when opening a document up in Photoshop? Anything i open up is increased by two thirds  in file size and i've no idea why ( e.g..8MB doc opens as 24MB doc)
    What is even more strange is that it won't let me reduce a  file size to anything under 1MB.
    Has anyone ever come across this problem?...would appreciate any help.
    Thanks
    Bri

    Hey Noel
    Fair Play.
    This is what is happening.
    I’ve got a standard JPEG file that viewed in Explorer and Bridge reads as a 2.70MB (2838,796 bytes) file. Pixel dimensions 797x1000. Document size  6.75 x 8.47cm .Res 300 PPI.
    When I open it in CS4 it reads 2.28MB. (This is the first thing I don’t understand)
    Either way my simple( so I thought ) objective is to decrease the file size.
    In the image size box I have re-set the resolution to 72ppi as I just need to post the image on a Website. My before and after calculations in the image Panel reads (was 2.28MB...now 134.3k)
    Great! .this is what I want, However..... when I ‘save as’ and the JPEG compression box appears it has suddenly increased the file to 1.8MB Large file...and only allows me to reduce it to 1.7MB small file.
    Admittedly this is not my area of expertise....I’m doing something wrong so any pointers would be much appreciated.
    Bri

  • Export QuickTime file with new audio and maintain the file size and quality as the original.

    I shot some footage for a client yesterday and ran into an issue. To make a long story short I have QuickTime mov files shot with my Panasonic GH4 that have a buzzing sound in the audio track. I have clean audio from a recorder that can be sync'd. Is there a way for me to do this for the client and deliver them as the same QuickTime file but with the clean audio and keep the file size close to the original and not have quality loss in the image?
    If so I will probably put all of the spanned clips together from each interview and sync the audio before delivery. I am just not sure which codec will give the client the same quality footage compared to the originals and not have a massive difference in the overall file size. They did request that they be Quicktime MOV files though so that is a must.
    I don't see this as an option in the codecs in the export settings in PP, but is there a way to export as ProRes or another MAC native codec that will save them from having to convert it on their end? I am on a PC with Adobe CS5.5 so I am not too familiar with MACs, but from what I understand they would need to convert the files if I sent them straight out of the camera.
    I found some related search results for this but they pertained to "Best quality" for export. I am not sure how the varying options work but I don't want to create files that are considerably larger, just not less quality.
    If anyone has experience with this it would be greatly appreciated.
    Thanks,
    Cole

    Here's the workflow: I imported the video footage into iMovie '08 and did my edits. Then I exported it (share) to my desktop with compression set @ 740 X 480. Then I used QuickTime Pro to fix the audio track. The file plays perfectly with both audio tracks working. It's a QuickTime file (.mov).
    I hope this jars any replies as to why the file when uploaded to my iWeb gallery drops the second audio track.
    Hmm,
    Jack

  • Welcome window problem.  appears every time i save and close a file of photoshop

    How to fix a bug regarding welcome window. this window appears every time i save and close a file of photoshop, its started after the last update 2014.2.0

    See this document: Troubleshoot Welcome Screen in Photoshop
    Scroll all the way down to the bottom. There's a check box "Don't Show Welcome Screen Again"
    You can relaunch the screen at a later date by selecting Help>Welcome Screen...
    ~ Arpit

  • Can I resize photos and reduce JPEG file sizes by using Photpshop Elements?

    Can I resize photos and reduce JPEG file sizes by using Photpshop Elements?

    Go to Image>Resize>image size.
    For purpose of web posting, go to File>save for web.

  • Batch Process increases file size from 230kb - 5044kb

    I'm currently using Acrobat 7 Professional.
    I want to use the "Batch" process to re-convert pdf documents that were watermarked using the batch process. We're talking 1000+ documents.
    The reason we need to re-convert them is because the watermarked documents are taking more than 4min/page to print, if it prints at all.
    I've manually re-converted a few of the documents using "print to pdf", kept the file size at 230kb and with no printing issues.
    However, since we have 1000s of these documents to do, most with multiple pages, this would be a very time consuming project.
    I've "Batched" "print to pdf" and it also takes care of our printing issues, however, the file size has jumped to 5044kb. Having literally thousands of files to do - this is an issue on our file server.
    I've done multiple tests with adjusting the pdf settings in the batch process... some work (and again the file size is large) - some don't allow for printing or slow it way down again.
    I understand that it's a "layer" or "transparency" thing that's slowing the printing process and when I mess with it in the batch process, it takes care of the printing issues but not the file size.
    Can someone help me please??? I've been working on this for a couple days now and I'm at my limits.
    How can I batch process that will flatten layers but give me a manageable file size?
    Your help would be GREATLY appreciated - Michelle

    I don't know if it can help here, but don't I recall that wayyyy back in Photoshop 7.0 the last File - Save As you have executed sets the JPEG quality for batch File - Save As commands?  I am not sure when the "Override Action Save-As Commands" became functional, but try this:
    1.  Uncheck "Override Action Save-As Commands".
    2.  Remove the "File - Save As" step you have recorded in your action.  The action should NOT save the file.
    3.  Save any old JPEG file at the quality level you prefer, just to set the "memory" of the quality level.
    4.  Run the File - Automate - Batch, specifying input and output folders there.
    I'll bet it will work.
    -Noel

  • Flash CS3 program flickers during "undo" and "save and compact"

    Hi,
    I have Flash CS3 Suite. I have a computer that was built in 2004, running Windows XP Professional - 2 Gb RAM although I have given the Virtual memory 4 Gb. The reason I did that is because I thought maybe my RAM wasn't enough. I have no problems with any of the other Adobe programs or any other programs on my computer, just Flash Professional. The running process only uses 16,030 K so it can't be that.
    I have uninstalled, cleaned all adobe files completely off of my computer, done a fresh install, more than once, but no matter what, I seem to have issues with the 2 following commands:
    1.  Edit > undo feature
    2.  File > save and compact - although this doesn't flicker as much as the other one.
    The flickering is frustrating, and, of course I can't do anything else until the flickering stops.
    The positive side of this issue is that I am being much more thoughtful about my editing which is good anyway, but it would be nice for the flickering to permanently stop. Any and all help will be greatly appreciated.
    jd

    upload your fla and post a link.

  • Save and close InDesign file CS4 JS

    Hi, I need to save and close InDesign file after export pdf was done. Once export is complete the script opens the pdf file and the script gets interrupted. Here what I was trying and I am not sure if it even in the right direction:
    #targetengine "session"
    main();
    function main(){
        var myApplicationEventListener = app.eventListeners.add("afterExport",
        mySaveInDesign, false);
        var myDocumentEventListener = app.documents.item(0).eventListeners.add
        ("afterExport", mySaveInDesign, false);
        app.scriptPreferences.version = 6.0;
    var myEventNames = ["afterExport"] ;
    function mySaveInDesign(myEvent){
        var myDocument = myEvent.parent;
        saveInDesign ();
    function saveInDesign (){
        //myDocument.save(myDocument);
        app.activeDocument.save(myDocument);
        app.activeDocument.close(myDocument);
    Your help is highly appreciated.
    Yulia

    Save either takes no argument (equivalent to the File/Save menu option) or a file path, equivalent to File/Save As.
    So, your save commands aren't going to work as written. You either need just save(); or save(myDocument.fullName);
    Dave

  • I can't save and open .ai files.

    Hello.
    I can't save and open the file with special character in virtual drive(using communications). -> refer to this.. ( http://software.naver.com/software/summary.nhn?softwareId=MFS_105031 )
    *Special character I used is 黒(not 黑).
    If I rename the file name(黒.ai -> test.ai), the file is opend successfully.
    And when I save the file as "Illustrator ver.8 format", the file is saved well.
    This is the error message I have.
    - open : this file cannot be found.
    - save : The file may be read-only, or another user may have it open. Please save the document with a different name or in a different folder.
    Please answer me~.
    Version :     Illustrator CS5
    OS :            Windows 7 32bits

    Firefox now always stores the old session, and you can access it by going to the History menu and selecting "Restore Previous Session"
    If you want Firefox to display the message to save the session, it can be turned back on by changing some preferences.
    # Type '''about:config''' into the location bar and press enter
    # Accept the warning message that appears, you will be taken to a list of preferences
    # Locate the preference '''browser.tabs.warnOnClose''', if its value is set to '''false''', double-click on it to change its value to '''true'''
    # Repeat this for these 3 preferences '''browser.warnOnQuit''', '''browser.warnOnRestart''' and '''browser.showQuitWarning'''

  • Do i need acrobat pro to open a pdf i created in quark and reduce the file size?

    do i need acrobat pro to open a pdf i created in quark and reduce the file size?

    i'll try that! thank you.
    Daniel Flavin <mailto:[email protected]>
    June 24, 2014 at 3:23 PM
    >
          do i need acrobat pro to open a pdf i created in quark and
          reduce the file size?
    created by Daniel Flavin
    <https://forums.adobe.com/people/Daniel+Flavin> in /Creating, Editing
    & Exporting PDFs/ - View the full discussion
    <https://forums.adobe.com/message/6493113#6493113>

  • Can I save and read text files on a server that I host?

    Hello everyone,
    I am a java hobbiest. I was wondering if I set up my own server, running out of my house, could I have my applets save to my computer and read from my computer without having to learn JDBC and a DATABASE language. In other words could i just have my applet save and read text files from and to my server?
    I'm trying to set up a sight for my 5th grade class where parents can log into. Thanks for your time.
    Oh yeah, which is easier, learning how to set up a server or learning JDBC and a DATABASE language?
    If you have any other good idease please tell me them
    Thank you, Bryan

    Short answer: This isn't gonna work
    Long answer: For this to work, the first thing you're going to need is a static IP address and a DNS name registered -actually you don't necessarily need #2 but you're probably gonna want it and it's by far the easier of the steps.
    As far as I know to get a fixed IP address you've either gotta be directly attached to a larger network (ie university network) or get a leased line from an ISP.
    Once you've got that done come back to us.

  • Increase File Size

    After converting CR2 Raw files to Jpeg the size of the files is too small. How if possible Can one increase file size in Elements 9? Thanks  

    Why on earth do you want to have "larger" files?
    JPG uses compression to reduce the size of the resulting files.  If you're concerned about the picture quality because of JPG's lossy compression method, simply set the JPG "Quality" setting to its maximum.
    Ken

Maybe you are looking for