[bug?] tapping the next tab after closing a tab skips to the third tab.
this is an annoying situation I encounter a lot.
steps to encounter this problem:
1. open 3 or more tabs, for this example they are called tab1, tab2, and tab3 in spot1, spot2, and spot3.
2. go to tab1 and close the tab switcher.
3. open the tab switcher, and close tab1 by sliding it sideways.
4. after tab2 jumps to spot1, tap it to switch to tab2.
5. observe the bug: firefox for android skips tab2 and instead opens tab3.
this happens to me a lot and I often don't notice it in time.
after this happens I close the tab in spot1 (tab2) thinking that was the tab I just viewed.
Hi thedicemaster,
If you swipe to close the first tab, then tap the tab that is in that first slot, the original second tab appears for me. (While in list tab view)
If I swipe to the right to close the first tab then quickly select the 2nd tab that moves to the 1st sport I still see the new tab. Perhaps I am not quick enough. (This is also in list tab view with out tapping the tab switcher as I did in the video.)
:-(
Similar Messages
-
After updating to iOS 6.1.5 on my iPod Touch 4th Gen, some of my songs are skipping to the next song after 30 seconds even though the iPod appears to be playing the current song. Some of my songs are mp3 files that have been playing fine for years...
Anybody else experiencing this issue?
I'm using the latest version of iTunes and i don't have that problem on my PC. The only difference as far as i can tell is the updated iOS & firmware...
AJYes, other have. If the songs play OK in iTunes on the computer
Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync all music and resync
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar -
Is there a way to view the web history after it's been cleared from the history tab?
Is there a way to view the web history after it's been cleared from the history tab?
Yes.
-
what is the next step after editing or triming a video?
what type of file format should be save and what to do after that?In the early days of digital video editing, an export render could take hours! Not many applications are as hard on system resources as video editing, and rendering the final edit is probably the most system intense action of all.
Head on over to the Premiere Pro Hardware forum to see what sort of computer hardware the pros use for NLE (non linear editing), or to the PPBM5 site for a better look.
PPBM5 Benchmark
Also check out the specs on the Video Guys website -
My ipod touch 4g doesn't work i didnt have charger at first and when my cousins came over i charged it with his it was full and the next minute it was empty. it gave me the warning sign. After tht it shut off and i ot my charger today and it wont turn on it also gave me a blue light which was kinda like an electric shock. Someone help plz
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Recently, after cancelling the tick of a song, which is the next song after the one I am listening, in the song list, the canceled song will still run for the next song. I remember that it used not to happen like this. How can I solve this problem?
This looks like a change of behaviour in iTunes 12. Once songs are queued up to the Up Next list then they play whether ticked or not. If you want to skip certain songs already queued click the Up Next tool, then click the small X to the left of the song that appears when you hover over it.
tt2 -
How do I set up iTunes to automatically move on to / play the next album after the last one has finished? (in Album view).
This used to happen automatically in Genre view.Hi Henryhippo,
If you have questions about play order in iTunes, you may find the following article helpful; I believe you can use the Play Next or Add to Up Next to add albums as well as songs.
iTunes 11 for Windows: Ways to play songs
Regards,
- Brenden -
What is the Next Step after MCSE
I need to know what is the Next Step after MCSE massaging ?
and what is the top certificate in MicrosoftHey Mohamed,
I agree with Danny, he explained perfectly.
MCSE Certification is the highest in servers, DB, etc. .. (except from Office where different certifications)
MASTER degree have now only for Microsoft Office.
See all qualifications for office following link
https://www.microsoft.com/learning/en-us/office-certification.aspx
Or details of the MASTER link
https://www.microsoft.com/learning/en-us/mos-master-certification.aspx
Please Mark This As Answer if it helps to solve the issue
Tzuri Ben Ezra | My Certifications:
CompTIA A+ ,Microsoft MCP, MCTS, MCSA, MCITP
|
FaceBook: Tzuri FaceBook | vCard:
Tzuri vCard |
Microsoft ID:
Microsoft Transcript
| -
How do i automatically start the next slide after the video on the prevues slide is finished
I have slide 1 with a video loop witch tranistion to the next on a click. the next slide (slide2) automaticlly starts plays. I want to know how to start Slide 3 automaticlly after the video on slide 2 is done playing. Slide 3 is also on a loop. and start slide 4 on a click. then repeats......
I once had the same problem, but it was worse because the length of the video was more than the maximum delay that could be set (Keynote'08, I do not know if this changed in '09). I was helped by someone of this community. She suggested adding invisible text fields, each having a delay, sequenced one after the other. Together they added up to a sufficient delay to play my video and go to the next slide after that. I hope this information will be of use, if need arises.
-
My iPad3 loses the 3g connection after closing the magnetic cover.
My iPad 3 loses the 3g connection after closing the magnetic cover. When the cover is opened, the iPad shows the connection is active. However, it does not connect but searches for emails etc. I have to then reboot.
have you tried disabling then reabling the 3G setting on your iPad after waking the iPad?
It may be that as it goes to sleep the iPad loses the 3G connection, you may be in a low connection area, and then has problems finding it again, this can happen occassional with WiFi.
If you go into Settings, then Mobile Data and toggle the On/Off switch Off, then On again, see if that brings it back without restarting the iPad. -
Status is not updated after Save in the transaction but after closing and
Hi
In CRM GUI and PCUI,
1) Opening a transaction (say an Invoice)
2) Changing the status from 'Open' to 'Completed'.
3) Save it
4) after save, the status shows as 'Open' (but it should show as completed) but if we come out of the transaction and come again to the same transaction, we can see now that it is in completed status.
Is there any thing to be checked or SAP usually works like this?
As whenever an user change the status from open to completed, an follow up activity is created, since here the user see the open status again in the same transatcion (after saving), he/she again change the status from open to completed and save.. so it now creates two follow-up activity..
Please help.HI
i had similar issue when I planned callback after saving document (function module with commit was doing sth).
This commit caused that status displayed on my document was previous not actual. When entering document again status was ok.
So check if there are any function modules with commit launched after you save document (of course I do not mean standard commit for saved document).
Regards
Radek -
Newbie: How to go to the next frame after movie clip is complete
I know this should be the simplest thing to do, but I can't
figure it out. I have a movie clip on my timeline. I want it to
play completely before the timeline moves to the next frame. Can
someone point me in the right direction?On the last frame in the movieclip, place this code (it's
Actionscript 2).
_parent.nextFrame(); -
I'm running Windows 7 and iTunes (and the other Apple programs) wouldn't automatically update. Went through all the options and finally had to delete all Apple files and re-download iTunes. Worked fine, until the next update. Is there a glitch in the system? Does someone know of some proprietory block (I think it is related to Quicktime)? Also, once I re-downloaded everything, cleaned everything up, and deleted duplicate files, I closed down my computer. When I re-started it, iTunes was "brand new" -- all of my music, organization, tagging, etc. was gone and had to start over. Idea?
Ok, so after like 4 days of going through all these different issues, I figured out that several programs weren't downloading, and it was an issue with my wireless connectivity messing up the digital signatures, so if you plug in your comp to the modem and delete your temp files, it should start to work!
-
hhello, please help if you can,,,
i had a new screen installed, everything working fine, as was using the phone, the next day I was flying so turn off the phone in the usual way...
oon arrival turned the phone on, received a slow acting black background with the apple sign visual, but never moved from that......... So tried a reset still the same just left looking at the apple sing in the middle if the screen,makes it there for 5 mins but still never turn on completely,,,,,
again I tried,,,,,, again I tried a reset, then started to received lines of white writing, about 4-5 lines slowly like it was being typed, which stateed INCORRECT SHUTDOWN, ????????? then took out my MacBook air, to connect to ITunes to see whaypt I could do,
i tunes did not find the phone as would normally so opened ITunes manually, still did not find the Iphone,,,,,
Any Ideas please, as it is useless stuck in the drawer, I am an apple user, an quite knowledgable having other Iphine 5, IPad air and Mac,,,,, I am stuck,,,,
PLease Help,my hank you in advanceSharmFarm wrote:
Good ev Ning Mario49 firstly I would like to say a great thank you for your attention to trying to help me,,,,, i have looked at the links and will try everything stated first thing…
Hi Mario,,,,
I tried everything in your reply,,, thank you again,, I had done that once before and all was working great,,
I have just now tried the Reinstall via iTunes, about 20 into the download, the iTunes logo on the phone disappeared, and the Apple Logo appeared again,,, I waited until the iTunes stated that the download had finished, and the install was in progress,,,
Nothing happened, still the Apple Logo was visual on the screen, iTunes never recognised the phone which it was on my iTunes account previously,,,
Still just a bunch of lines, maybe 5 or 6 so small writing,, I personally can not read what it is telling me, someone said it reads, incorrect shutdown,,,????????
Please advise,???
I am now at a loss,,, I really became excited when I saw the iTunes icon after putting the phone into restore,,,???
Thank you again
D -
I keep getting the following message after attempting to download and install the latest update for iTunes: missing MSVCR80.dll. error 7 (windows error 126). Anyone else having this issue? How do I get iTunes back in working order?
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
After updated software on mac mini with os x 10.7.5 and restart the mouse pointer after about 30 sec. converted to the rainbow wheel and I can't control the computer. The rainbow wheel was runnig 8 hrs and I turn off mac mini by power button, then I turn on mac mini with key Shift and p/w, checked HD. My HD has
capacity 499.25 GB used 86.91GB. Is there a solution to fix this problem axcept the reinstall os?Please read this whole message before doing anything.
This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
These steps are to be taken while booted in safe mode.
Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then copy it. The headings “Step 1” and so on are not part of the commands.
Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” and press return. You should then get a new line ending in a dollar sign.
Step 1
Triple-click the line of text below to select it:
for k in /Sy*/L*/Ex*/{,.?}*.kext; do test -f "$k/Contents/Info.plist" && /usr/libexec/PlistBuddy -c "Print :CFBundleIdentifier" "$_" | egrep -qv "apple|Accusys|ArcMSR|ATTO|CalDigit|HighPoint|hp-fax|JMicron|print|SoftRAID|stex" && echo $k; done | open -f -a TextEdit
Copy the selected text to the Clipboard by pressing the key combination command-C. Then click anywhere in the Terminal window and paste (command-V). A TextEdit window will open with the output of the command. Post the contents of that window, if any — the text, please, not a screenshot. You can then close the TextEdit window. The title of the window doesn't matter, and you don't need to post that. No typing is involved in this step.
Step 2
Repeat with this line:
sudo defaults read com.apple.loginwindow LoginHook | open -f -a TextEdit
This time you'll be prompted for your login password, which you do have to type. Nothing will be displayed when you type it. Type it carefully and then press return. You may get a one-time warning to be careful. Heed that warning, but don't post it. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
Step 3
Repeat with this line:
ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null | open -f -a TextEdit
Important: If you formerly synchronized with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
Step 4
osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null | open -f -a TextEdit
Remember, Steps 1-4 are all copy-and-paste — no typing, except your password. Also remember to post the output.
You can then quit Terminal.
Maybe you are looking for
-
Getting list of used fonts in TextFlow
Hi! I'm wondering how i can get a list of fonts used in a TextFlow - especially usefull, when working with embedded fonts loaded at runtime. The idea is to be able when loading new content into textflow, to preload the used fonts before the text is s
-
Whenever I try to upload photos into iPhoto, they load but when importing it just stops a picture or two into it and then just sits there. I can't stop the import so I have to shut off my camera when it is importing and start again. Does anyone know
-
error 148:3 has disable my use of Adobe Acrobat as well as the use of the Adobe Creative Suite 4. ERror 148:3 'means "Licensing for this Product has Stopped Working."
-
My iphoto icon has disappeared from my dock and applications folder. Please HELP
I tried clicking on the iphoto icon in the dock and nothing happened. I went looking for it in the applications folder and it wasn't there. I then moved the icon from the dock on to the desktop and it poof'd into thin air! GONE. What can I do? Please
-
Hi All, Can anyone help me to search for BADI?? In Our Assessment Cycle the Profit center is hard coded for posting the values using Badi. Can anyone help me how to search the Badi. The Business want to avoid such postings to the Profit center. Full