BUG - too many images crashes apps.

Hello,
I would like to report a bug to RIM.
When using a sketchting app (Paint book or Sketch), if I attempt to load an image, the application hangs and the keyboard and parts of the touchpad get disabled even after I have killed the application, also at this point File Manager will refuse to start. The only way to get it back to normal is to force a reboot.
I have a 32Gig Playbook and have all of my Picassa photos synced to it.
I believe that the large number of photos may be the reason for it crashing.
Does anyone else have this issue please?
Cheers
Alex

How would this be a bug. How many images are loaded. Do you have enough memory available.
Be a Shepard and not an iSheep.

Similar Messages

Photoshop CS5 doesn't work properly after opening too many images

Hi
This is my very first post.
I'm also new to CS5. I do hundreds of photo touching/cropping that is a part of my job for web.
Everything is running fine but when ever I open too many images in Photoshop CS5 it doesn't work, I mean it doesn't hang or freezes it just open all files and then doesn't show any images (just blank) and when I closes 20/30 or more images then it get fine.
I thought it might a RAM problem but i have i3 processor with 4GB of RAM. I have also increased memory usage from 60% to 80% but I'm still facing the same problem.
Would like to tell that in the previous version of CS3 I never got this problem and worked fine.
thanks
--Venkat

Disabling OpenGL entirely is draconian.
You could try, if it's not already set that way, going into the Advanced settings and switching OpenGL to "Basic" mode, which uses fewer resources.
-Noel

Firefox crashes when too many images are opened

Okay, so, a problem that appeared in 4.0 for me, and hasn't gone away ever since.
The problem is basically summarized in the short description - whenever too many heavy images are in the browser's tabs simultaneously, it slows down to a halt; then sometimes as I scroll it fails to redraw the page, with black non-redrawn area increasing as I scroll and disappearing as I change tabs back and forth.
After a dozen seconds of such sad behaviour, the browser crashes.
Sometimes, however, things go better. And it just crashes.
The problem can be easily replicated with Save Images extension, say, on any photo hosting, or by opening
http://danvolodar.livejournal.com/friends/big_picture
It should be noted that 3.6 never had that problem, and opened pages where I aggregated thousands of images, - slowly, of course, but it ''did'' work. 4 and 5 do ''not''.

Go to the address '''about:crashes''' and tell us your latest crash IDs. We can then look at the data specific to your crash and have a better idea of what is causing the problem.
Or you can go to '''Start''' and type in the Vista search box '''%APPDATA%''' then click on '''Roaming''' then go to '''Mozilla>Firefox>Crash Reports>Submitted''' then open the .txt files and copy the Crash report ID that starts with '''bp-xxxxx-xxxx'''

I think I've decided to give up on this board..P6N SLI-FI. Too many sys. crashes

I thought errantly I had a good board when I changed brands from Asus to this MSI board but apparently I was wrong. I've been having problems I've never seen on any of the Asus based systems I have. This MSI system has crashed twice already and is having serious HDD write problems. With it outfitted the same as my Asus P5ND2-SLI, except with a faster processor P4 630 on the Asus and P4 650 on the MSI, it is sluggish playing Halo. Whereas the Asus system seems to fly through it with ease.
I don't know whats going on with it but I don't care to see that Blue crash screen again.
I haven't added or changed anything in how it is loaded. Programs are all the same. It even crashes with PowerDVD 4. A program that has been very good on all of the other systems I've used it on. :(

Quote from: Hans on 15-March-07, 00:09:15
So, you posted more threads but you weren't able to get the right solution. Well, that happens, unfortunatelly.
Now, just to keep things clear: did you start this topic just to inform us that you are giving up, or do you actually want new input?
If so, please provide full specifications of your power supply unit. Please create a signature, so that your specs are in all your posts. That makes our job a lot easier. You can make a sig through the Profile button.
Now, just one question to start with:
- Did you install all chipset drivers?
I indicated I was thinking about it. But wasting $150 is too much to think about so I'm trying to make the best of this MSI product.
PSU specs:
Model
Brand    CORSAIR
Model    CMPSU-620HX
SPEC
Type    ATX12V v2.2 and EPS12V 2.91
Maximum Power    620W
Fans    1 x 120mm ball-bearing fan
PFC    Active
Main Connector    20 + 4Pin
Dual +12V    Yes
PCI-E Connectors    2 x 6Pin
SLI Support    SLI Certified
Modular Cabling Support    Yes
Over Voltage Protection    Yes
Input Voltage    100 - 240 V
Input Frequency Range    50/60 Hz
Input Current    10A
Output    +3.3@24A,+5V@30A,+12V1@18A,+12V2@18A,+12V3@18A,- [email protected],+5VSB@3A
MTBF    >100,000 Hours
Approvals    UL, CUL, CE, CB, FCC Class B, TUV, CCC, C-tick
Features
Connectors    1 x 20+4-pin ATX
1 x 4-pin +12V
1 x 8-pin EPS12V
2 x PCI-Express
10 x 4-pin peripheral
2 x 4-pin floppy
8 x SATA
Features    Corsair has engineered the HX620W with features such as whisper quiet thermally controlled 120mm fan, up to 84% high efficiency, combined 50A on triple +12V rails, and modular cable connections with enhanced flexible cables to provide sustained 620W output even at 50ºC to the most demanding of systems.
The HX Series is the ideal power supply for high performance and gaming PCs, Audio/Video workstations, and file servers.
I installed the latest chipset drivers. Here is the link where I aquired them:
http://www.nvidia.com/object/nf_650i_winxp32_8.43.html
Additional specs
Memory:
Model
Brand    G.SKILL
Model    F2-5300CL5S-1GBNJ
Type    240-Pin DDR2 SDRAM
Tech Spec
Capacity    1GB
Speed    DDR2 667 (PC2 5300)
Cas Latency    5
Timing    5-5-5-15
Voltage    1.8V
Heat Spreader    Yes
Video card:
Specifications: Performance: NVIDIA GeForce 7800 GT. 470 MHz GPU. 20 Pixel Pipelines. 400 MHz RAMDAC. Memory: 256 MB, 256 bit DDR3. 1100 MHz (effective). 35.2 GB/s Memory Bandwidth. Interface: PCI-E 16X. DVI-I, DVI-I, VIVO. Resolution & Refresh: 240 Hz Max Refresh Rate. 2048 x 1536 x 32bit x 85 Hz Max Analog. 2560 x 1600 and 1600 x 1200 Max Digital.
System Requirements: Minimum of a 450 Watt power supply. An available 6 pin PCI-E power connector (hard drive power dongle to PCI-E 6 pin adapter included with card).
CPU:
Model
Brand    Intel
Processors Type    Desktop
Series    Pentium 4
Model    BX80547PG3400F
CPU Socket Type
CPU Socket Type    LGA 775
Tech Spec
Core    Prescott
Multi-Core    Single-Core
Name    Pentium 4 650
Operating Frequency    3.4GHz
FSB    800MHz
L1 Cache    12KB+16KB
L2 Cache    2MB
Manufacturing Tech    90 nm
Vista Ready    Yes
64 bit Support    Yes
Hyper-Threading Support    Yes
Virtualization Technology Support    No
Multimedia Instruction    MMX, SSE, SSE2, SSE3
Voltage    1.25-1.388V
Cooling Device    Heatsink and Fan included
HDDs:
Model
Brand    Western Digital
Series    Caviar SE
Model    WD1600JS
Performance
Interface    SATA 3.0Gb/s
Capacity    160GB
RPM    7200 RPM
Cache    8MB
Average Seek Time    8.9ms
Average Latency    4.2ms
Physical Spec
Form Factor    3.5"
Features
Features    Cool - Cool operation results in the highest reliability, even in intensely hot environments such as digital video recorders. That's why these, the coolest on the market, are the drives of choice for the world's leading consumer electronics and PC manufacturers.
Quiet - The technology that Tom's Hardware Guide called "very fast and nearly silent" is used throughout this family of drives. Our WhisperDrive technology minimizes noise to levels near the threshold of human hearing. To cut seek noise, SoftSeek technology streamlines read/write seeking algorithms, resulting in more efficient operation.
DVD drive:
BenQ 16X DVD±R DVD Burner With LightScribe Black E-IDE/ATAPI Model DW1655
Features:
* LightScribe Technology : Create Professional Looking DVD Labels.
* BenQ SolidBurn - Intelligent Self-Learning Writing Technology
* Write Right Technology
* BenQ Q Suite 2.0 - Optimizt DVD ReWriter Control
Specifications:
* Interface: E-IDE / ATAPI
* Technology : SolidBurn Technology, Write Right Technologies, Dual Cooling System, LightScribe Technology
* Buffer Size : 2 MB
* Performance :
Writing Speed : 16X +R, 16X -R, 8X +RW, 6X -RW, 8X +R DL, 4X -R DL, 48X CD-R, 32X - CD/RW, 48X - CD/ROM, 16X DVD/ROM Reading speed Max. DVD
Reading Speed : 16X Max. CD reading speed 48x Seek time 120ms (DVD) / 120ms (CD)
Minimum Systems Requirements
   CPU: Pentium® III 550MHz minimum.
   HDD 800MB - 1 GB free space for copying CD to CD image
   100 MB free space for Software Installation
   128 MB DRAM or higer
   Monitor Display Resoution 1024 X 768 at 16-bit color
OS Support - Windows 2000 / XP / XP Professional x64

IPhoto 7 importing iPhoto 6 data: way too many images

In iPhoto 7 (aka iPhoto '08) on 10.4.10 MBP, I mounted a hard drive with data from another Mac (using iPhoto 6, 10.3.9); this library has about 32,000 items. On import, iPhoto 7 sees 47,000+ images! The pics it's importing look like deleted and un-rotated ones - aargh! (:-( Please tell me it's not importing deleted, recovered and otherwise unwanted or duplicate images.

mactester:
Welcome to the Apple Discussions. As TD pointed out if you imported the V6 library either via the menu or by dragging the library into the open iPhoto 7 window you'll get every image file in the library.
iPhoto Library Manager will copy the rolls or albums from one to another library and keep the metadata intact. HOWEVER, both libraries must be at the save version. So you'll need to upgrade that other library by opening it with iPhoto 7 and doing the converting. Then iPLM can copy the photos to the primary library like this.
Do you Twango?
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Too many images to display warning

The default smart albums specifically the "All Iimages" and the by year albums have suddenly quit working and display the warning above. I can create a smart album that works. Any ideas? I do have over 100,000 images in my library
Thanks
Byron
Mac Pro quad 5g ram 23 inch Apple display Mac OS X (10.4.9) MacbookPro 15inch 4g ram

I ran into this issue last week, and have reported it as a bug to Apple as it just about makes Aperture useless as a professional DAM tool IMO. This makes it impossible to create a single unified library of images and to be able to perform searches across the entire library using metadata.
The problem starts as soon as your library grows past 100K images. At that point any smart album whose search scope exceeds 100K images (including the in-built ones) stops working. The only exception to this is a smart album that solely uses the star ratings - for some reason they keep working!
If you have smart albums whose search scope is less than 100K images (eg those inside specific projects), then they'll work quite happily.
The only way to get everything working again is to reduce the number of images in the library either by deleting some, or spliting the library out into two or more libraries. Neither of which are very good solutions. Deleting images will only postpone the 100K issue for a while, and spliting libraries will lead to maintenance headaches with keywords.
Suggest that you file a bug-report to Apple for this one, then they may fix it sometime.

Pages '09 docs with imbedded images crash app after OS 10.6 upgrade

I'm unable to open Pages '09 docs with imbedded images (JPG, GIF, TIF, etc) since upgrading to 10.6. I have not seen the same behavior from Pages docs w/o imbedded images. Permission repair lists no errors; can re-install iWork '09 if needed. Below are portions of the report the OS sends back to Apple:
PlugIn Path: /Library/Application Support/iWork '09/Frameworks/SFWordProcessing.framework/Versions/A/SFWordProcessing
PlugIn Identifier: SFWordProcessing
PlugIn Version: ??? (???)
Exception Type: EXCBADACCESS (SIGSEGV)
Exception Codes: KERNINVALIDADDRESS at 0x0000000018ef5004
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Any suggestions or help would be appreciated!
Thanks.

After further investigation, I need to refine my evaluation of the problem. I'm able to insert JPG, GIF, and TIF files taken from WWW or CS.
The issue is not with Pages, but with MakeMusic's Finale. You are able to export score/part examples as graphic files (TIF in v2008). As a music teacher, I'm importing those TIFs into pre-existing Pages documents for student assessment.
I've now been unable to open those TIFs directly in Preview or Finder Quick Look. It seems the expected information about a TIF in SN is no being produced by Finale.
I have consulted MakeMusic's forums and currently, there are no official statements from MakeMusic on the compatibility of 2008-2010 versions with SN.
Thanks to everyone for your suggestions. I'll have to wait out an update from MakeMusic.

Pages hangs with too many images

hello,
i was writing a book with lots of print-quality images and as i reached 100+ pages the program started slowing down and ultimately by page 140 it froze along with os x. 2gb ram got filled up, naturally. but why no option of thumbnail view of the images? it would completely unload ram.
it took me days to split the book into three parts with constant fear that my work would be lost.
so, is there a thumbnail images option or we're again beta testing apple's products? :-/
regards,
rado
.

rado-gado wrote:
but why no option of thumbnail view of the images? it would completely unload ram.
Maybe because the designers didn't thought that the program is made to embed numerous huge picture files.
What are you calling "print-quality" images? More than 300 dpi ones are only eating memory without any positive impact.
If you disagree with Apple's choices, the dedicated path is:
_Go to "Provide Pages Feedback" in the "Pages" menu_, describe what you wish.
Then, cross your fingers, and wait _at least_ for iWork'09
Yvan KOENIG (from FRANCE jeudi 24 juillet 2008 10:11:48)

Can you too many home page apps

Does having several websites on ones homepage slow down the performance of Firefox?

Depends on those home pages and how quickly they load and how often you need to (re)load them. 
If all those pages are pages with a lot of images or ads and Flash content and a lot of JavaScript then you should be cautious. 
A website like www.google.com doesn't add any extra load.

Too many images in a slideshow for iDVD 6?

I used iDVD 6.0.2 to import an album from iPhoto, add titles/captions and iTunes music, then burn a DVD. There are 295 slides, and the show stops after the 99th slide. I've read that this is a problem with the older versions of iDVD, but I have never had a problem with this version. Is my only option to break the presentation into smaller slideshows? I don't want to do that if I don't have to.
I also want to avoid creating a QT movie and importing it because I like the caption option that is available with iDVD.
sue

thanks for the speedy response! i read the information in the link you posted before posting my question, but that info indicates that i should not have a problem with 100+ slides. what's odd is that i cannot get the dvd to play past 100 in any player i try. i've run it in five different players--including a playstation--all with the same results. the dvd stops at slide 100, and that's it.
i also burned three copies with three different media brands of DVD. no difference. i checked the filenames of all the pix to ensure there wasn't a problem there. no problem i can detect.
sooo frustrating since this is the first time i have had a problem with more than 100 slides.
any ideas are welcome. otherwise, i'll just have to break down the presentation into multiple slideshows.
sue

Logic 8.02 Crashes often. Too Many BUGS!! Unstable.

Hi,
There's too many problems with Logic 8.02. It's not stable and keeps crashing. I save often becos I expect it may crash unexpectedly whilst loading plugins.
The final straw for me was when I couldn't even save my session - as saving it actually caused a crash. ha! (what a joke).
In one hour, I've recorded logic crashing atleast 4 to 5 times. This is why I'm making this post. Apple needs to pick up there game and release software that doesn't crash 4 to 5 times. it's lame but I can't do anything about it but wait for apple to fix it. I do push the computer really hard though. For basic stuff, logic 8's stable, but when you add things like space designer followed by other cpu intensive processes that logic starts to crash unexpectedly.
How do we report bugs to apple? I found a few bugs that needs attention.
for example:
1. Opening a plugin in slot 13 renders it useless cos you can't bring up it's graphics interface when double clicking on it.
2. Can't copy an object's name and paste it to another object cos the function "command C" doesn't work after Click on the object with the logic's "text" pointer.
Run the a Mac Pro 8 x 2.8GHz on Mac OS 10.5.4 with large buffer settings.
Has anyone found other bugs? How do we let apple know?
Thanks.
Vaughn.
Frustrated with Logic 8.02

In one hour, I've recorded logic crashing atleast 4 to 5 times. This is why I'm making this post. Apple needs to pick up there game and release software that doesn't crash 4 to 5 times. it's lame but I can't do anything about it but wait for apple to fix it.
Vaughn man that s.ucks. You must be ready to throw your machine out the window. However, what you seem to be saying is that this is absolutely positively Logic's fault, and that this MUST BE the norm for Logic. This type of thinking isn't going to get you anywhere. Logic is NOT your only problem, or else we all would be having these problems too! If we all were experiencing what you are experiencing, these forums would have exploded and people would be having bonfires with their Logic boxes and buying Protools systems.
It's been a bumpy ride since Logic 8 and Leopard came out, but VAST MAJORITY OF PEOPLE are reporting VERY GOOD to FANTASTIC performance from Logic 8, using 8.0.2 and 10.5.3 or 10.5.4. This includes a lot of pro's working on very large projects. In fact, I've seen only a couple of posts reporting crashes since 10.5.3 came out. What you are experiencing is NOT normal.
If you want to use Logic, you have to figure out what's going on with YOUR system, because something is wrong with your set-up specifically.
Try trashing Logic's prefs and repairing disk permissions. If you're working on old projects made with previous versions, or old autoload projects, try starting with a fresh slate. There have been issues with old projects and autoloads. Try a big project with only Logic's internal plugs, as there have been some incompatibility issues with 3rd party plugs. Make sure you have all updates for those. Not saying that Logic will only work with it's own stuff, but there may be one plug that's causing all your problems, and you have to figure out what it is.
Try removing rewire plug ins, especially Melodyne.
If all else fails, reinstall Leopard and Logic. A huge pain, but not as much so as making yourself crazy waiting for the solution to come from the outside.
Good Luck!
Z.

App Store displays "too many HTTP redirects" after I click a link of the app from a browser. Help.

when i click a link to the app on the app store the browser closes and opens up the app store. after 3-5 seconds, a message pops up saying "too many HTTP redirects"
i tried to reset all settings, still the same error
i tried changing DNS servers, still the same error
i tried changing security encryption on the wifi router, still the same error
i tried to free up available space to 3GB, still the same error
i restarted, still the same error
This error occured 2 days after i updated the device to 6.1
the app store alone works fine, but when i clicked a link of the app from a browser, the app store displays this.
I'm using iPad Mini 16GB wifi
can someone help us eliminate this annoyance (or bug, i might call it)

It may be some apps on your iphone that is causing that.
Nope. The security on iOS means that no app can interfere with the OS or any other app. An app may crash, but it cannot cause any other app to crash or misbehave, and no app can affect system functionality, like networking.
you could download a virus protecter from the app store if you can acseess the app store.
Nope. The same security in iOS means that not only are there no viruses (or malware of any other kind) for iOS, but also that anti-virus apps are not possible. They would not be able to scan anything except themselves, which would be singularly unuseful. Thus, there are not actually any true anti-virus apps in the App Store. There are a couple that can scan your e-mail for you, but that is achieved through connecting to the IMAP server where your e-mail is stored. They cannot scan the phone.

AIR 3.7.0.166 Sound Bug Crash APP without error

Hello guys,
The last Adobe Air Mobile update gaves me a lot of head ake!
Im developing a multimidia APP, and since AIR was updated in my device, no more sounds is playing in the application.
It just crashes withou any error in Debug mode, and restarts. When i call Sound.play media function in any ocasion, it happens.
It seams that there is a REALLY BIG CONFLICT with the new AIR and Sound.play.
My references:
Im developing in Flash Builder 4.6, running Adobe AIR 3.7.0.166
on a Motorola Atrix MB860
with Android 2.2.2
To reproduce the bug just install any AIR APP with music controls, like this: http://coenraets.org/blog/air-for-android-samples/voice-notes-for-android/
APK: http://coenraets.org/android/VoiceNotes/VoiceNotes.apk with the 3.7.0.166 version of AIR, and try to reproduce the sound.
That application was running ok until the update. There is an textflow bug too, witch import only underline and link <a> tag (no more bold and italic ) from HTML, but compared to the sound crash this is nothing.
I insist that all this was running OK since the last update (i even run an backup version cause i think i was making any script error).
I´m looking hopelessly the LAST version before that last one so i can continue developing my application. With this error i canot do anything!!!!
If someone can help me where i can find it, id appreciate a lot!
Thanks

05-29 19:59:00.896: I/DEBUG(3857): *** *** *** *** *** *** *** *** *** *** *** *** *** *** *** ***
05-29 19:59:00.896: I/DEBUG(3857): Build fingerprint: 'sprd/sprdroid_base/hsdroid:2.3.5/MocorDroid2.3.5/W12.20_P-17_20130107.155157:eng/test-ke ys'
05-29 19:59:00.896: I/DEBUG(3857): pid: 4130, tid: 4154 >>> air.com.baijie.learnhanzi <<<
05-29 19:59:00.896: I/DEBUG(3857): signal 11 (SIGSEGV), code 1 (SEGV_MAPERR), fault addr 00000000
05-29 19:59:00.896: I/DEBUG(3857): r0 00000000 r1 afd46608 r2 00000000 r3 00000001
05-29 19:59:00.896: I/DEBUG(3857): r4 83195a94 r5 00006d00 r6 00000000 r7 00000017
05-29 19:59:00.896: I/DEBUG(3857): r8 2f8df18f r9 00003120 10 00323dd0 fp 00008ae0
05-29 19:59:00.896: I/DEBUG(3857): ip 00000000 sp 49995cc8 lr afd10e74 pc 8214b238 cpsr 60800030
05-29 19:59:00.896: I/DEBUG(3857): d0 454545656372756f d1 2e2e2e276a634b50
05-29 19:59:00.896: I/DEBUG(3857): d2 203334312020203a d3 6c20746f6e6e6163
05-29 19:59:00.896: I/DEBUG(3857): d4 5f2720657461636f d5 6f72646e61374e5a
05-29 19:59:00.896: I/DEBUG(3857): d6 6f43584d4f386469 d7 6165724336636564
05-29 19:59:00.896: I/DEBUG(3857): d8 0000000000000000 d9 3ff0000000000000
05-29 19:59:00.896: I/DEBUG(3857): d10 0000000000000000 d11 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d12 0000000000000000 d13 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d14 0000000000000000 d15 0000000000000000
05-29 19:59:00.896: I/DEBUG(3857): d16 5f534e4b52456574 d17 345f534e49707332
05-29 19:59:00.906: I/DEBUG(3857): d18 52454545584d4f49 d19 534e495f31534e4b
05-29 19:59:00.906: I/DEBUG(3857): d20 61446174654d385f d21 4b52624545456174
05-29 19:59:00.906: I/DEBUG(3857): d22 5f534e495f31534e d23 53616964654d3131
05-29 19:59:00.906: I/DEBUG(3857): d24 0000000000000000 d25 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d26 0000000000000000 d27 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d28 0000000000000000 d29 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): d30 0000000000000000 d31 0000000000000000
05-29 19:59:00.906: I/DEBUG(3857): scr 60000013
05-29 19:59:01.026: I/DEBUG(3857): #00 pc 0014b238 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.046: I/DEBUG(3857): #01 lr afd10e74 /system/lib/libc.so
05-29 19:59:01.046: I/DEBUG(3857): code around pc:
05-29 19:59:01.056: I/DEBUG(3857): 8214b218 4810bd10 68004478 490fe7fa 68094479
05-29 19:59:01.056: I/DEBUG(3857): 8214b228 b1604788 23014a0d 447a7023 47906812
05-29 19:59:01.056: I/DEBUG(3857): 8214b238 6b4b6801 4a0a4798 6010447a 4809e7e8
05-29 19:59:01.056: I/DEBUG(3857): 8214b248 68004478 bf00e7e4 0102ef30 0104a884
05-29 19:59:01.056: I/DEBUG(3857): 8214b258 0104a880 0104a878 01023cc8 01028ece
05-29 19:59:01.056: I/DEBUG(3857): code around lr:
05-29 19:59:01.056: I/DEBUG(3857): afd10e54 02800016 08bd87f0 e5964000 e5967000
05-29 19:59:01.056: I/DEBUG(3857): afd10e64 e2144903 1a00000e e5965000 ebffee45
05-29 19:59:01.056: I/DEBUG(3857): afd10e74 e2055a02 e3853001 e1500003 0a000006
05-29 19:59:01.056: I/DEBUG(3857): afd10e84 e5865000 e1a00006 e1a01005 e3a02001
05-29 19:59:01.056: I/DEBUG(3857): afd10e94 ebfffea8 e1a00004 e8bd87f0 e3a00000
05-29 19:59:01.056: I/DEBUG(3857): stack:
05-29 19:59:01.056: I/DEBUG(3857): 49995c88 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995c8c 826efaaf /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995c90 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995c94 8276c953 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995c98 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995c9c 82145e97 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995ca0 8316e000
05-29 19:59:01.056: I/DEBUG(3857): 49995ca4 831a5e28
05-29 19:59:01.056: I/DEBUG(3857): 49995ca8 0000000a
05-29 19:59:01.056: I/DEBUG(3857): 49995cac 821d0869 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995cb0 83195a94
05-29 19:59:01.056: I/DEBUG(3857): 49995cb4 00006d00
05-29 19:59:01.056: I/DEBUG(3857): 49995cb8 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995cbc 00000017
05-29 19:59:01.056: I/DEBUG(3857): 49995cc0 df002777
05-29 19:59:01.056: I/DEBUG(3857): 49995cc4 e3a070ad
05-29 19:59:01.056: I/DEBUG(3857): #00 49995cc8 00001000
05-29 19:59:01.056: I/DEBUG(3857): 49995ccc 821d5cdd /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995cd0 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995cd4 8316e000
05-29 19:59:01.056: I/DEBUG(3857): 49995cd8 00323dd0
05-29 19:59:01.056: I/DEBUG(3857): 49995cdc 002b6b98
05-29 19:59:01.056: I/DEBUG(3857): 49995ce0 82ded2d4 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995ce4 82ded320 /mnt/asec/air.com.baijie.learnhanzi-1/lib/libCore.so
05-29 19:59:01.056: I/DEBUG(3857): 49995ce8 00325ba0
05-29 19:59:01.056: I/DEBUG(3857): 49995cec 00009b98 /system/bin/app_process
05-29 19:59:01.056: I/DEBUG(3857): 49995cf0 00008124 /system/bin/app_process
05-29 19:59:01.056: I/DEBUG(3857): 49995cf4 00001074
05-29 19:59:01.056: I/DEBUG(3857): 49995cf8 4278f500
05-29 19:59:01.056: I/DEBUG(3857): 49995cfc 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995d00 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995d04 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995d08 00000000
05-29 19:59:01.056: I/DEBUG(3857): 49995d0c 3ff00000
SC8810, Android 2.3.5

Too many touch points reported: Bug ?

Dear JavaFX community
Following situation. I have a touch handler who recognizes special gestures and fires javafx.GestureEvent derivates on positive detection. the gesture event carries a list of cloned touch points for carrying the touches on start and end of the gesture.
Now if a listener to this GestureEvents fails for whatever reason with an uncaught exception, JavaFX touch point handling goes awry by constantly throwing RuntimeExceptions: "Too many touch points reported". From that point, the touch application is not usable anymore and must be restarted.
If the listener completes without error, the app continues to work as expected.
Firing the GestureEvent in a Platform.runLater seemed to help, but I experienced the problem at least once. The problem is not reproducable reliably though.
I believe this to be a bug in JavaFX.
Any thoughts/hints/comments on this?
See the stacktraces below. The first NPE trace is my deliberately provoked exception. The second trace arises upon every single subsequent touch event
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at view.services.ui.navigation.internal.NavigationService.home(NavigationService.java:319)
at view.ui.gestures.addons.grab.internal.DefaultGrabEventHandler.handle(DefaultGrabEventHandler.java:298)
at view.ui.gestures.addons.grab.internal.DefaultGrabEventHandler.handle(DefaultGrabEventHandler.java:1)
at com.sun.javafx.event.CompositeEventHandler$NormalEventHandlerRecord.handleBubblingEvent(CompositeEventHandler.java:218)
at com.sun.javafx.event.CompositeEventHandler.dispatchBubblingEvent(CompositeEventHandler.java:80)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:238)
at com.sun.javafx.event.EventHandlerManager.dispatchBubblingEvent(EventHandlerManager.java:191)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchBubblingEvent(CompositeEventDispatcher.java:59)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:58)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:49)
at javafx.event.Event.fireEvent(Event.java:203)
at keba.view.javafx.gestures.grab.GrabDetector.fireEvent(GrabDetector.java:579)
at keba.view.javafx.gestures.grab.GrabDetector.fireGrabMoveOrEnd(GrabDetector.java:452)
at keba.view.javafx.gestures.grab.GrabDetector.handleTouchReleased(GrabDetector.java:415)
at keba.view.javafx.gestures.grab.GrabDetector.handle(GrabDetector.java:336)
at keba.view.javafx.gestures.grab.GrabDetector.handle(GrabDetector.java:1)
at com.sun.javafx.event.CompositeEventHandler$NormalEventFilterRecord.handleCapturingEvent(CompositeEventHandler.java:282)
at com.sun.javafx.event.CompositeEventHandler.dispatchCapturingEvent(CompositeEventHandler.java:98)
at com.sun.javafx.event.EventHandlerManager.dispatchCapturingEvent(EventHandlerManager.java:223)
at com.sun.javafx.event.EventHandlerManager.dispatchCapturingEvent(EventHandlerManager.java:180)
at com.sun.javafx.event.CompositeEventDispatcher.dispatchCapturingEvent(CompositeEventDispatcher.java:43)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:52)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.BasicEventDispatcher.dispatchEvent(BasicEventDispatcher.java:56)
at com.sun.javafx.event.EventDispatchChainImpl.dispatchEvent(EventDispatchChainImpl.java:114)
at com.sun.javafx.event.EventUtil.fireEventImpl(EventUtil.java:74)
at com.sun.javafx.event.EventUtil.fireEvent(EventUtil.java:54)
at javafx.event.Event.fireEvent(Event.java:203)
at javafx.scene.Scene.processTouchEvent(Scene.java:1773)
at javafx.scene.Scene.access$5800(Scene.java:193)
at javafx.scene.Scene$ScenePeerListener.touchEventEnd(Scene.java:2712)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$11.run(GlassViewEventHandler.java:989)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$11.run(GlassViewEventHandler.java:985)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleEndTouchEvent(GlassViewEventHandler.java:985)
at com.sun.glass.ui.View.handleEndTouchEvent(View.java:553)
at com.sun.glass.ui.View.notifyEndTouchEvent(View.java:1007)
at com.sun.glass.ui.TouchInputSupport.notifyEndTouchEvent(TouchInputSupport.java:85)
at com.sun.glass.ui.win.WinGestureSupport.notifyEndTouchEvent(WinGestureSupport.java:62)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.access$300(WinApplication.java:39)
at com.sun.glass.ui.win.WinApplication$4$1.run(WinApplication.java:112)
at java.lang.Thread.run(Thread.java:744)
Exception in thread "JavaFX Application Thread" java.lang.RuntimeException: Too many touch points reported
at javafx.scene.Scene$ScenePeerListener.touchEventNext(Scene.java:2668)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$10.run(GlassViewEventHandler.java:965)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$10.run(GlassViewEventHandler.java:944)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleNextTouchEvent(GlassViewEventHandler.java:944)
at com.sun.glass.ui.View.handleNextTouchEvent(View.java:547)
at com.sun.glass.ui.View.notifyNextTouchEvent(View.java:1002)
at com.sun.glass.ui.TouchInputSupport.notifyNextTouchEvent(TouchInputSupport.java:117)
at com.sun.glass.ui.win.WinGestureSupport.notifyNextTouchEvent(WinGestureSupport.java:58)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.access$300(WinApplication.java:39)
at com.sun.glass.ui.win.WinApplication$4$1.run(WinApplication.java:112)
at java.lang.Thread.run(Thread.java:744)
Exception in thread "JavaFX Application Thread" java.lang.NullPointerException
at javafx.scene.Scene.processTouchEvent(Scene.java:1766)
at javafx.scene.Scene.access$5800(Scene.java:193)
at javafx.scene.Scene$ScenePeerListener.touchEventEnd(Scene.java:2712)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$11.run(GlassViewEventHandler.java:989)
at com.sun.javafx.tk.quantum.GlassViewEventHandler$11.run(GlassViewEventHandler.java:985)
at java.security.AccessController.doPrivileged(Native Method)
at com.sun.javafx.tk.quantum.GlassViewEventHandler.handleEndTouchEvent(GlassViewEventHandler.java:985)
at com.sun.glass.ui.View.handleEndTouchEvent(View.java:553)
at com.sun.glass.ui.View.notifyEndTouchEvent(View.java:1007)
at com.sun.glass.ui.TouchInputSupport.notifyEndTouchEvent(TouchInputSupport.java:85)
at com.sun.glass.ui.win.WinGestureSupport.notifyEndTouchEvent(WinGestureSupport.java:62)
at com.sun.glass.ui.win.WinApplication._runLoop(Native Method)
at com.sun.glass.ui.win.WinApplication.access$300(WinApplication.java:39)
at com.sun.glass.ui.win.WinApplication$4$1.run(WinApplication.java:112)
at java.lang.Thread.run(Thread.java:744)

Yes, this is a bug in FX. I filed it as RT-34602. As a workaround it would probably be best to catch the exceptions.

JSP bug? url.openStream() = server redirected too many times

I tried something the other day that works in Java, so it should work as a JSP scriptlet, but I received an error message that others have posted elsewhere without a compete resolution. Specifically, given a URL, say u, one ought to be able to do u.openStream() and eventually read the remote page. Typically, one might want to try
URL u = new URL("http://someserver.com/path/file.xxx")
BufferedReader bfr = new BufferedReader(new InputStreamReader(u.openStream()))and then read bfr line-by-line. The problem that seems to be fairly common is that the openStream() call throws a ProtocolException claiming "server redirected too many times (20), ."
What I've seen is that this exception occurs whenever the URL is outside the Tomcat server whence the call is being made; in our case, we're running "out-of-the-box" Jakarta Tomcat 4.1.29 on port 8080 of a w2k server. The code works perfectly in native Java and in JSP for a URL of the form "/anotherpage.jsp"
Is this a bug in JSP, or in our version of Tomcat, or is there just some configuration parameter that needs to be changed from its default? As I said, I've seen similar posts (with less detailed analysis) in the Usenet newsgroups, but not one has generated a response that explains and resolves the matter.
Perhaps a JSP guru out there could set the record straight? Thanks.
P.S. I know that the use of scriptlets in JSP is being discouraged, but they are still supported AFAIK.

Sure scriptlets are still supported. Most times though you can do things better with a custom tag. Why reinvent the wheel?
Just as a suggestion, you might try the JSTL <c:import> tag.
It basically does just this behind the scenes.
However I don't think that will help you in the end - it will probably hit the same error message.
My guess would be that the problem is not caused by java/JSP as such, but by a firewall, or configuration somewhere.
The following works fine for me (ignoring broken images of course)
<%@ page import="java.net.*, java.io.*" %>
<%
URL u = new URL("http://www.google.com");
BufferedReader bfr = new BufferedReader(new InputStreamReader(u.openStream()));
String line = null;
while ((line = bfr.readLine()) != null){
out.println(line);
%>Hope this helps,
evnafets

BUG - too many images crashes apps.

Similar Messages

Maybe you are looking for