Bug toolkit report - LMS 3.1

Hi
I have problems with Bug toolkit report - bug summary report.
I have empty all columns in this report. No bugs. Despite of having over 500 devices with various IOSes.
Is it depends on CCO account or something else?
Best regards
Marek

The Bug Toolkit report in RME can be problematic when it comes to certain device types.  That is why there is now a link to the Cisco.com Bug Toolkit report in the RME report interface.  You may have to forgo using the RME report, and use the Cisco.com tool directly to find bugs.

Similar Messages

  • Ciscoworks LMS 3.2 bug summary report

    Hi,
    I have one Ciscoworks LMS 3.2, it managed around 500 devices. I tried to generate bug summary report and the bug number is zero. Please kindly help to solve this problem.
    Best Regards,
    Jackson Ku                  

    For how many devices are you running the report?
    [ Wed Jan 05  21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,populateResults,295,Cisco.com URL Connection TimeOut: Try again later or with less number of devices.
    Have you tried running it for just one?
    This is also kind of strange,
    [ Wed Jan 05  21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,formBTDevHash,228,Device(s) are not supported by Cisco.com.
    [ Wed Jan 05  21:26:50 CST 2011 ],INFO ,[main],com.cisco.nm.rmeng.bugtool.BTBugSummary,formBTDevHash,229,Hence Could not generate report
    Like as if cisco.com would not know about these C3750's
    Maybe do an export of these 3750's in the DCR to see if the all have the same OID and if it is a supported OID.
    Are your device packages up to date? You may want to sync those with CCO.
    Cheers,
    Michel

  • Unable to generate BUG summary report in RME

    Hi, I am unable to generate bug summary report in RME. Even I can not generate PSIRT report as well..LMS always gives error "incorrect cisco.com credential. enter correct credential" I have checked my credentials are correct... it gives me error no BTKT:0014
    I am using LMS3.1 attaaching snap shot of my patch level and application version running on LMS...
    Please help me to solve this isue.
    Thanks

    Upgrade to LMS 3.2.1
    Install the patch for version 3.2 mentioned here https://supportforums.cisco.com/docs/DOC-16806
    Then it works again
    Cheers,
    Michel

  • V6 quiz report LMS as completed after 3 failed attempts

    I have a pure quiz in captivate 6 that allows the learner to take it 3 times only eg
    Attempt 1 = fail = report LMS incomplete
    Attempt 2 = fail = report LMS incomplete
    Attempt 3 = fail = report LMS incomplete
    What i need is not logical but.........
    I require the LMS to
    Attempt 1 = fail = report LMS incomplete
    Attempt 2 = fail = report LMS incomplete
    Attempt 3 = fail = report LMS complete
    Is this at all possible?
    Happy to try anything with instructions
    Thank you in advance and hope the above is clear enough
    Jo

    Hmm, very illogical indeed. Not consistent with normal SCORM behavior at all.
    Just  some ideas, without having checked them completely. You are using score or completion of slides as criterion? If it is the last option, make sure there are some slides to be viewed after the last attempt by using the Action on Fail that you'll find in the Quiz Preferences. I hope that is the case. But what if you have to report a score?
    Lilybiri

  • Bug in report CKDBSZ in Oracle Designer 2.1.2

    In that report (Database Table and Index Size Estimate) there's
    the following bug: the report doesn't compute estimates of
    indexes belonging to tablespaces other than those from their
    corresponding tables.
    Does anyone know if Oracle Corporation has corrected the
    problem? If not, does anyone have a corrected version from this
    report?
    Thank you!
    null

    Carlos,
    This forum is for Headstart related questions and experiences
    only. Please go to metalink.oracle.com to get more information on
    your problem.
    Regards,
    Lauri
    Carlos P     rez (guest) wrote:
    : In that report (Database Table and Index Size Estimate) there's
    : the following bug: the report doesn't compute estimates of
    : indexes belonging to tablespaces other than those from their
    : corresponding tables.
    : Does anyone know if Oracle Corporation has corrected the
    : problem? If not, does anyone have a corrected version from this
    : report?
    : Thank you!
    null

  • CSCsr27209 is not visible to me in the Bug Toolkit

    Here's what I recieved when I tried looking up this Bug ID.......
    Dear valued Cisco Bug Toolkit customer, the bug ID CSCsr27209 you searched contains proprietary information that cannot be disclosed at this time; therefore, we are unable to display the bug details. Please note it is our policy to make all externally-facing bugs available in Bug Toolkit to best assist our customers. As a result, the system administrators have been automatically alerted to the problem.
    While we are working to resolve this issue, we invite you to reach out to the experts on the Bug Toolkit Support Community. You may find answers there to your Bug Toolkit questions, or post your feedback on our forum as well. Thank you.
    I'm kind of curious about why this is.  But I'm really interested in knowing about this bug because it involves VDSL technology that I'm trying to implement at work and now I may be forced to wait on a resolution.
    Thanks to anyone, and everyone, who is interested and willing to assist.

    Hi Arun
    From what that I understand from the "Cisco 880VA - DATA SHEETS" and from the "Cisco 880VA - Q&A" that found in these links
    http://www.cisco.com/en/US/prod/collateral/routers/ps380/data_sheet_c78-613481.html
    http://www.cisco.com/en/US/prod/collateral/routers/ps380/qa_c67-612339_ps10536_Products_Q_and_A_Item.html
    The Cisco 887V supposed to support ADSL2/ADSL2+ & VDSL2 Automatic.
    Also in the "Cisco 860,880 and 890 Configuration Guide", it says that Cisco 887V can be setup to connect to the ADSL via the ATM0 interface. As you can see in the example over here:
    http://www.cisco.com/en/US/docs/routers/access/800/860-880-890/software/configuration/guide/routconf.html#wp1168916
    But none of that really happened.
    It seems that there is a fundamental bug with these devices that make it impossible to connect to the ADSL2 / ADSL2+ via the VDSL2 controller.
    Thanks
    Nitzan

  • What is the appropriate product name for CSS 11500 on Bug Toolkit

    Today I tried to search DDTs of CSS 11500 on Bug Toolkit (http://www.cisco.com/cgi-bin/Support/Bugtool/home.pl), however I can not find out appropriate product name corresponding to CSS 11500.
    Before I had searched DDTs of CSS 11500 on Bug Toolkit many times, at that time, if my memory correct..
    I selected "Cisco CSS 11500 Series Content Services Switches" in the list of "Search for bugs in other Cisco software and hardware products" on Bug Toolkit.
    But I can not find this product name today.
    Do you know what product name appropriate for CSS 11500 on Bug Toolkit ?
    Your information would be appreciated.
    Best regards,

    Hi Gilles,
    Thank you for your cooperation.
    Today, I can find the CSS at "new Bug Toolkit".
    http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
    Select Product Category: Application Networking Services
    Select Product: Cisco CSS 11000 Series Content Services
    So I understand I should go "new Bug Toolkit" instead of old "Bug Toolkit" to
    search any DDTs for CSS 11500.
    Many thanks.
    Best regards,

  • Keyword Search in Bug Toolkit - How effective is this search method for you?

    When searching by keyword(s) in Bug Toolkit, do you receive relevant results or do you often have to redo your search?  Any specifics you can provide would be helpful!

    When searching by keyword(s) in Bug Toolkit, do you receive relevant
    results or do you often have to redo your search?  Any specifics you
    can provide would be helpful!
    Hi,
    With my experience i need to redo the search and very rarely i get in first attempt.But onething sure with previous experience bug tool kit search is good now at least it provides results with asked key word and search results are fast also.
    Ganesh.H

  • Cannot see CSCto65299 in bug toolkit

    I was provided with bug CSCto65299 in a support case recently and was told the bug was public, but the bug toolkit says it is not.
    Is this bug public or is it not?

    Bobby,
    The defect should be visible.  The bug is updated and will appear within 48 hours. 
    The issue is fixed in the CCO code for 4.1.1. 
    Regards,
    Wes

  • Scheduled Outage Planned for Bug Toolkit on April 2nd 2011 between 09:00AM -09:00PM PST

    Cisco Bug Toolkit Users
    There is a scheduled outage planned for Saturday, April 2nd 2011 between 09:00AM and 09:00PM PST.
    During this period, Bug Toolkit will be experiencing intermittent outages due to Data Center related enhancements
    being implemented in our tools environment. 
    Please plan accordingly. 
    Thank you.
    The Bug Toolkit Team

    Thanks Arun for keeping the users informed.
    Sent from Cisco Technical Support iPhone App

  • Scheduled Outage Planned for Bug Toolkit on Jan 9th 2011 between 03:00AM -11:00AM PST

    Cisco Bug Toolkit Users
    There is a scheduled outage planned for Sunday, Jan 9th 2011 between 03:00AM and 11:00AM PST.
    During this period, Bug Toolkit will be experiencing intermittent outages due to Data Center related enhancements
    being implemented in our tools environment. 
    Please plan accordingly. 
    Thank you.
    The Bug Toolkit Team

    Thanks Arun for keeping the users informed.
    Sent from Cisco Technical Support iPhone App

  • Erreur 2147352567 avec Toolkit Report Generation

    Bonjour,
    Je dois programmer la génération automatique d'un rapport sous Excel. Je possède le Toolkit Report Generation.
    Tout fonctionnait correctement jusqu'à ce que je reçoive le message d'erreur "2147352567" en executant le vi permettant de générer mon rapport.
    Ce message survient dès l'utilisation du sous-programme NewReport.vi .
    Lorsque je cable entrées et sorties d'erreur, cela m'indique le message suivant: Nœud de propriété (arg 1) dans NI_ReportGenerationToolkit.lvlib:Excel_Open.vi->NI_ReportGenerationToolkit.lvlib:Excel Try Opening Excel Again.vi->NI_Excel.lvclass:new report subVI.vi->NI_report.lvclass:New Report.vi
    Merci d'avance pour votre aide.

    salut j'aime bien utiliser le report generation toolkit.
    A la lecture de ton post; je suis étonné par l'erreur; en effet
    et
    si je lis ton message, l'erreur provient de Excel_open.vi
    Donc ouverture d'excel OK; mais erreur "-2147319784
    J'ai le sentiement qu'Excel est dans une apparence que l'ActiveX n'arrive pas à modifier.
    > Tu peux laisser le vi ouvert, et regarder les valeurs des paramètres d'entrées
    > tu a redémarré ton PC?
    > Excel est bien fermé? plus de process ouvert? ctrl + alt sup
    > Faire un exemple
    A+
    Luc Desruelle | Voir mon profil | LabVIEW Code & blog
    Co-auteur livre LabVIEW : Programmation et applications
    CLA : Certified LabVIEW Architect / Certifié Architecte LabVIEW
    CLD : Certified LabVIEW Developer / Certifié Développeur LabVIEW

  • Java in Bug Toolkit

    Has the Java functionality in Bug Toolkit affected your search capabilities when searching for bugs?

    have u copied soure files to src folder
    and defined midlet and it's class under seetings tab?

  • XMP Toolkit bugs list/reports/...

    Is there a list of known but not fixed bugs?
    The one is
    MetaXMP::SetStandardAliases(XAP_NS_PDF) fails.

    No, there isn't. Listed in the v2.9 release notes are fixed bugs only.
    See the doc at
    http://partners.adobe.com/asn/developer/xmp/download/docs/XMPReleaseNotes.pdf

  • Labview VI with Excel toolkit report

    In SignalExpress, I have to analyze data and save this analysis in Excel Workbook, to do this, i reuse VI for the analysis, and use Report Generation 1.1.1 toolkit for Office. But an error appear : Error (97): Unknown System Error in Excel_Get_Properties.vi->Excel Workbook Properties.vi->BDT FIL Create or not worksheet.vi->Data to Excel.vi->BDT ANL Process and Save.vi->Data Processing Main.vi->Data Processing Main.vi.ProxyCaller
    So, What is it ?
    John Doe

    Hi Julien,
    What version of signal exepress are you using ? and what version of OFFIce is installed on your computer ?
    Regards,
    ClémentG

Maybe you are looking for