Bug? (unable to make fast replication btw ora 7 and 8)

hi
I can't make a FAST replication btw. oracle 73401 and ora 805.
complete and force work.
I create snapshot as select * from table1 with rowid, primary key. Before this I create snapshot log on ora 7.
Any ideas?

DEar Schello,
Thank You for response.
It looks like nobody workes with replication here... :(
Yes I know that Rowid changed. that's why they extend synt. create snpashot log.
I did create with rowid only.
It doesn't help.
Only complete replication works. I'm intereeted in "fast" actually :)
If I try to set "fast" option in snpashot and then make refresh - oracle return error that he can't use snapshot log. ( I don't remember taht is the code of error). So It seems oracle 7 problems.
But, maybe this problem oracle 805?
Maybe I need 806 oracle?
Where can I get list of bug fixes and were I can report about such kind of problem , about bug?
Thank You.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Schello:
Dunno what you mean exactly by saying "rowid, primary key".
In Oracle7, fast refresh only works when using rowid. So try to use rowid ONLY.
Problem is, Oracle8 uses a different ROWID.
Maybe that's why You have problems...<HR></BLOCKQUOTE>
null

Similar Messages

My phone is unable to make outgoing calls, receiving them and sending and receiving both SMS and IM are all ok? Anyone have solutions?

I have an IPhone 4 , which is on a Vodafone network, when I try and make outgoing calls it says 'call failed' . I am still able to send/receive SMS and IM and receiving calls is also so problem, does anyone have any solutions?

You need to contact Vodafone.

Unable to make skype linked to microsoft and faceb...

hello,
i have skype facebook: account since couple of months. i have open an account with microsoft outlook today. i couldn't make it linked to my old skype account.
how could i make skype microsoft and skype facebook all linked?

I don't understand how this system works. Because, reading this post"60minutes per month subscription gives you 60minutes per month, purchasing it 5 times in a row will still be 60minutes per month." Why does skype allow payment if the subscription convers only 60 minutes? It would allow payment after the subscription period is ended. Now what? I lost my money? Losing money doesnt matter, I wanted this call because it was an urgent call. I lost something more with this subscription. I would pay for nimbuzz and I would be happier than I am now. Such a big organization and such a big application allow some misunderstanding things. This service realy sucks and won't use it anymore. I will ask other people, if they had similar problems.

Unable to make FireFox my browser, babylon and PC Cleaner Pro are taken over

Love FireFox, Thank you all. My computer is infected by two unwanted programs. Babylon and PC Cleaner Pro. Please Help, I am a Senior. My ph is , 778-440-3398
Raymond

To remove Babylon, See:
* https://support.mozilla.org/sk/questions/901118#answer-281976
Do a malware check with some malware scan programs. You need to scan with all programs because each program detects different malware. Make sure that you update each program to get the latest version of the database before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free
See also "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked and Searches are redirected to another site

Unable to make calls to India

I have recharged unlimited premium pack for one month for $14 plus. However I am unable to make any calls to India and throwing an error message as insufficient credit. It's annoying.. I feel it was useless of paying 14 bucks as I can't make calls to desired country.. If there is no facility of calling to India, pls refund my money.. Awaiting for your swift response...!!!

Hello and welcome to the Skype Community.
The UAE blocks all VoIP outbound traffic including Skype. Try accessing the internet using a VPN.
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Unable to make purchase

I am unable to make any purchase of chips and have been told to get support from iTunes.

Having a similar issue. But I think it may be related to a dispute I filed with PayPal over a piece of junk software I bought via the App Store on the iPhone. Initially, the reason per a message on screen is that my PayPal account was no longer authorized to make purchases. So I updated the payment information and added a normal credit card. Updated the software OS to current version, rebooted the phone several times. Went through the whole change your password routine. Tried contacting Apple support who said I have to pay them to figure out the problem, etc. I've seriously spent three hours going through all of this and I'm at the point now that I'm about just sell the iPhone on eBay. Still no resolution.

I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

Unable to make microphone to work on NVIDIA MCP55 onboard sound card

Hello.
Some time ago, I bought a nice HP xw9400 Workstation (with Dual Core AMD Opteron 2216) from Germany. Despite it's starting to become old by today's standards for some stuff like gaming, it's still quite okay to use and the SAS HDD makes it boot fastly. And it has one of the best cases, you can plug PCI/PCIe/PCI-X cards very easily and it's very nice to change or add HDDs. Maybe I'll upgrade the CPUs (I can upgrade the bios and it seems it can support better CPUs) if I find them on eBay or other place.
I have less problems with Arch than the rest of distributions, but I still have weird issues. Despite my computer hardware is somewhat old, I still experience weird problems everywhere (it seems I have some kind of weird "luck").
I have problems using my microphone under Arch with "NVIDIA Corporation MCP55 High Definition Audio (rev a2)" onboard sound card , here is the relevant info.
http://www.alsa-project.org/db/?f=5907a … f5d2b9d88c
$ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Dec 12 00:00 by-id
drwxr-xr-x 2 root root 80 Dec 12 00:00 by-path
crw-rw----+ 1 root audio 116, 7 Dec 11 23:58 controlC0
crw-rw----+ 1 root audio 116, 9 Dec 12 00:00 controlC1
crw-rw----+ 1 root audio 116, 6 Dec 11 23:58 hwC0D0
crw-rw----+ 1 root audio 116, 5 Dec 12 01:34 pcmC0D0c
crw-rw----+ 1 root audio 116, 4 Dec 12 02:33 pcmC0D0p
crw-rw----+ 1 root audio 116, 3 Dec 11 23:58 pcmC0D1p
crw-rw----+ 1 root audio 116, 2 Dec 12 01:28 pcmC0D2c
crw-rw----+ 1 root audio 116, 8 Dec 12 01:43 pcmC1D0c
crw-rw---- 1 root audio 116, 1 Dec 11 23:58 seq
crw-rw----+ 1 root audio 116, 33 Dec 11 23:58 timer
% arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC262 Alt Analog [ALC262 Alt Analog]
Subdevices: 2/2
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
card 1: Camera [USB Video Camera], device 0: USB Audio [USB Audio]
Subdevices: 1/1
Subdevice #0: subdevice #0
% arecord --list-pcms
null
Discard all samples (playback) or generate zero samples (capture)
default:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
sysdefault:CARD=NVidia
HDA NVidia, ALC262 Analog
Default Audio Device
front:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
Front speakers
surround40:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=NVidia,DEV=0
HDA NVidia, ALC262 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
default:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
sysdefault:CARD=Camera
USB Video Camera, USB Audio
Default Audio Device
front:CARD=Camera,DEV=0
USB Video Camera, USB Audio
Front speakers
surround40:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.0 Surround output to Front and Rear speakers
surround41:CARD=Camera,DEV=0
USB Video Camera, USB Audio
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Camera,DEV=0
USB Video Camera, USB Audio
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Camera,DEV=0
USB Video Camera, USB Audio
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Camera,DEV=0
USB Video Camera, USB Audio
IEC958 (S/PDIF) Digital Audio Output
(I was unable to make the microphone on the usb webcam to work, but that's another issue I'll ask in a separate forum thread...)
% head -n 1 /proc/asound/card0/codec*
Codec: Realtek ALC262
I found this in Gentoo forums, very similar issue and a fix that don't works (see in a bit further)
http://forums.gentoo.org/viewtopic-t-88 … art-0.html
And this...
http://ubuntuforums.org/showthread.php?t=1672571
http://ubuntuforums.org/showthread.php?t=1475588
https://bugs.launchpad.net/ubuntu/+sour … bug/577178
http://www.linuxforums.org/forum/ubuntu … rking.html (2007 forum post, but very similar)
http://lists.opensuse.org/opensuse-bugs … 02583.html (2009)
https://bugzilla.redhat.com/show_bug.cgi?id=522101 (2009, closed in 2011)
https://bugzilla.novell.com/show_bug.cgi?id=474383
-> http://lists.opensuse.org/opensuse-bugs … 02583.html (it seems the bug tracker works quite bad or there's some issue looking at that issue, so here's the mailing list message about it)
I also tried create /etc/modprobe.d/alsa-base.conf and add the following line to it...
options snd-hda-intel model=6stack
And no luck! I tried it and still appear both "Rear Mic" and "Front Mic". I'll provide a screenshot later.
I'm starting to understand this, maybe it can help me...
http://alsa.opensrc.org/Record_from_mic
I tested both sound hardware by using arecord and audacity, no luck at all
% arecord -Dhw:1 --dump-hw-params
Recording WAVE 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
HW Params of device "hw:1":
ACCESS: MMAP_INTERLEAVED RW_INTERLEAVED
FORMAT: S16_LE
SUBFORMAT: STD
SAMPLE_BITS: 16
FRAME_BITS: 16
CHANNELS: 1
RATE: [8000 48000]
PERIOD_TIME: [1000 32768000]
PERIOD_SIZE: [32 262144]
PERIOD_BYTES: [64 524288]
PERIODS: [2 1024]
BUFFER_TIME: (1333 65536000]
BUFFER_SIZE: [64 524288]
BUFFER_BYTES: [128 1048576]
TICK_TIME: ALL
arecord: set_params:1233: Sample format non available
Available formats:
- S16_LE
% arecord -D hw:1 -f S16_LE myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V myfile.raw
Recording WAVE 'stdin' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -V -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 8000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r48000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r44100 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 44100 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
% arecord -D hw:1 -f S16_LE -r16000 myfile.raw
Recording WAVE 'myfile.raw' : Signed 16 bit Little Endian, Rate 16000 Hz, Mono
arecord: pcm_read:2031: read error: Input/output error
(I tried them with my user and root, same results)
I had an Sound Blaster Audigy 4 Pro, but removed it to see if there was some problem. I'm still unable to use my Microphone even on onboard audio hardware. I'll try to use it once I have the microphone working
Regards.
Last edited by timofonic (2013-12-12 04:11:57)

Sorry, that was wrong, I meant
arecord -l
Have you tried making a virtual loopback device like above and using
arecord -vv -fdat out.wav
You should see the #### fluctuate as you speak into the mic. If not, then unmute and turn up your mic in alsamixer. That loopback device will allow you to capture your sound card and hear it at the same time. Another way to do it is to use a jumper from line out to line in on your sound device. You won't be able to hear it while you record though.
If your sound device works, then you can capture what's going through it. You'll need to determine which vitual device your mic is.
Example
arecord -l
**** List of CAPTURE Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 2: ALC662 rev1 Alt Analog [ALC662 rev1 Alt Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Loopback [Loopback], device 0: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7
card 1: Loopback [Loopback], device 1: Loopback PCM [Loopback PCM]
Subdevices: 8/8
Subdevice #0: subdevice #0
Subdevice #1: subdevice #1
Subdevice #2: subdevice #2
Subdevice #3: subdevice #3
Subdevice #4: subdevice #4
Subdevice #5: subdevice #5
Subdevice #6: subdevice #6
Subdevice #7: subdevice #7

MapiExceptionMdbOffline: Unable to make connection to the server. (hr=0x80004005, ec=1142)

Hello,
We have 2 Exchange 2013 (build 712) servers in a DAG with distinct subnets. Cisco ASA in between was set to have no filtering between servers in subnet.
We cannot add database copies nor move mailboxes.
Tes-Mapiconnectivty fails with
unspaceId : e8a087f1-6197-48df-b094-d5c93a7b6070
Server      : CLI-SRV01
Database    : CLI-MDB01
Mailbox     : SystemMailbox{376e8d54-7154-484a-a0a3-58f22d73236f}
MailboxGuid :
IsArchive   :
Result      : *FAILURE*
Latency     : 00:00:00
Error       : [Microsoft.Exchange.Data.Storage.MailboxOfflineException]: Cannot open mailbox /o=First
              Organization/ou=Exchange Administrative Group
              (FYDIBOHF23SPDLT)/cn=Configuration/cn=Servers/cn=CLI-SRV01/cn=Microsoft System Attendant. Inner error
              [Microsoft.Mapi.MapiExceptionMdbOffline]: MapiExceptionMdbOffline: Unable to make connection to the
              server. (hr=0x80004005, ec=1142)
In event log:
The Microsoft Exchange Mailbox Replication service was unable to process jobs in a mailbox database.
Database: RDB
Error: MapiExceptionRecoveryMDBMismatch: Unable to open message store. (hr=0x80004005, ec=1165)
Diagnostic context:
    Lid: 55847   EMSMDBPOOL.EcPoolSessionDoRpc called [length=132]
    Lid: 43559   EMSMDBPOOL.EcPoolSessionDoRpc returned [ec=0x0][length=248][latency=0]
Adding database copy fails with
The seeding operation failed. Error: An error occurred while performing the seed operation. Error: Failed to open a log truncation context to source server 'CLI-SRV02.CLI.ch'. Hresult: 0xc7ff07d7. Error: Failed to open a log truncation context because the
Microsoft Exchange Information Store service is not running. [Database: CLI-PFDB02, Server: CLI-SRV01.CLI.ch]
How can I further verify communication from CLI-SRV02 to CLI-SRV01 ?
Any help welcome
/Patrice

Hi,
Let's begin with the following similar thread:
http://social.technet.microsoft.com/Forums/en-US/b651d65c-92f3-460c-b555-247acb8e6fd7/recovered-exchange-2013-arbitration-system-mailboxes?forum=exchangesvravailabilityandisasterrecovery
It is the same error in the event log with you when moving mailboxes. And it can be resolved by recreating the mailboxes.
Additionally, to check the network connection between two servers, I recommend you use the network monitor to catch the package.
Thanks，
If you have feedback for TechNet Subscriber Support, contact
[email protected]
Angela Shi
TechNet Community Support

TS4079 Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new numb

Siri used to work fine when making mobile calls in Ecuador until yesterday, when the administration of Ecuador added an aditional number in all mobile numbers existing in Ecuador. Since then Siri is unable to make any mobile calls with any new number.Help
I`ve tried restarting, rebooting, nothing works.
The interesting thing is that SIRI can call to previous mobile numbers (without the new digit) obviously not connecting , and, can call to any other numbers as an office or home number. So the problem is the new digit in the mobile number

Ecuador has added an extra digit to mobile phone numbers but apple wont accept 10 digit phone numbers so we cant use facetime or apple IM or verify our new phone numbers. ( and Siri won't work either!) I have contacted apple support online but can't request a call back as the apple system says our new phone numbers are invalid. I am going to phone them tomorrow and you should complain too at http://www.apple.com/support/contact/. . The more people that bring this to their attention the faster it will get fixed

Verizon iPhone unable to make or receive calls

Hello everyone, my Verizon iPhone is intermittently unable to make or receive calls (yes I do have reception). Has anyone experienced this before? I've called Verizon customer service and they were no help and suggested replacing the device at the apple store which I did. Verizon tech support ended up saying they would look into my issue with the network team, and contact me, which they never did. Apple sort of suggested it's a Verizon issue, and was not going to replace it for that reason, until I told them my battery was dieing quick too (luckily I had a screenshot of usage). So they're kinda blaming eachother- and I'm stuck in the middle with no support/help. I've tried ALL of the troubleshooting procedures. Do you think it's a Verizon or iPhone problem? What should I do?
One reason I think it's a Verizon issue is, I've had 2 iPhones that had the same problem- what are the chances of that? One reason I believe it's a Apple iPhone issue is because ALL of the Verizon phones in my household work perfectly all the time, except mine. Again it's intermittent, which is why I recorded videos.
Here is my brother's iPhone calling mine (both Verizon): http://www.youtube.com/watch?v=PWvZN90_adk
My iPhone calling brother's: http://www.youtube.com/watch?v=9ZFS5iiNrus
My iPhone calling a friends phone: http://www.youtube.com/watch?v=CGcB6uH0Ax8
My friend calling my iPhone: http://www.youtube.com/watch?v=OCnJc4e_DAQ

I have tried all the troubleshooting methods on the iPhone before this one multiple times by myself and with verizon tech support. Anyways, I gave it a try on this iPhone except the restore, because I want the apple genius to be able to run a diagnostic on it. I did the restore on my prior iPhone and he said he couldn't run the diagnostic because I restored it.
My results from the troubleshooting link:
1. Check Signal - I have 3/5 bars, still doesn't work
2. Reset Network Settings - I did that, still doesn't work
3. Verizon Update Preferred Roaming List - My iPhone gets "Call Failed" when dialing *228 (btw I already did this the day I got this iPhone).
4. Check Carrier - 4 of the 5 Verizon phones in my house work perfectly, so I doubt it's a carrier issue at this point. But I will give Verizon another call tomorrow morning to make sure.

HT4623 Apple IPhone is not accepting my security code on my credit card unable to make purchases on my IPhone anymore. Please advise already called my bank so it is a apple problem happening.

Apple IPhone is not accepting my security code on my credit card unable to make purchases on my IPhone anymore. Please advise already called my bank so it is a apple problem happening. I was trying to purchase poker chips from world series of poker app.

My download speed during this test was 6.63 MB so fast enough for the App Store.
This youtube movie shows what happens: http://m.youtube.com/#/watch?v=jPa_W0PrL5c
The App Store is generally very slow.
Sean

Mailbox Move Not Complete - Unable to make admin interface connection to server.

Hello,
I have added a second exchange 2007 server and have moved over 20 mailboxes to the new server. I seem to have a problem that the mailbox move has not been completed properly. I'm getting errors in the event log that the search indexer cannot connect to the
admin interface. I'm also unable to login as any one of the users who I've moved to the new server.
Here's one of the errors I'm getting:
Exchange Search Indexer has temporarily disabled indexing of the Mailbox Database Third Storage Group\Mailbox Database 03 (GUID = d4f3ee4d-68b0-4d21-8a76-ee96bf298f34) due to an error (Microsoft.Mapi.MapiExceptionNetworkError: MapiExceptionNetworkError:
Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
Diagnostic context:
    Lid: 10648   dwParam: 0x6D9      Msg: EEInfo: Generating component: 2
    Lid: 14744   dwParam: 0x6D9      Msg: EEInfo: Status: 1753
    Lid: 9624    dwParam: 0x6D9      Msg: EEInfo: Detection location: 501
    Lid: 13720   dwParam: 0x6D9      Msg: EEInfo: Flags: 0
    Lid: 11672   dwParam: 0x6D9      Msg: EEInfo: NumberOfParameters: 4
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[0]: Unicode string: ncacn_ip_tcp
    Lid: 8856    dwParam: 0x6D9      Msg: EEInfo: prm[1]: Unicode string: EP-SW-EX04
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[2]: Long val: -1988875570
    Lid: 12952   dwParam: 0x6D9      Msg: EEInfo: prm[3]: Long val: 382312662
    Lid: 24060   StoreEc: 0x80040115
    Lid: 23746
    Lid: 31938   StoreEc: 0x80040115
    Lid: 19650
    Lid: 27842   StoreEc: 0x80040115
    Lid: 20866
    Lid: 29058   StoreEc: 0x80040115
   at Microsoft.Mapi.MapiExceptionHelper.ThrowIfError(String message, Int32 hresult, Int32 ec, DiagnosticContext diagCtx)
   at Microsoft.Mapi.ExRpcAdmin.Create(String server, String user, String domain, String password)
   at Microsoft.Exchange.Search.NotificationWatcher.NotificationWatcherThread()).

Hello,
I have been fighting today with the migration off my old SBS2003 server to a brand new SBS2008 server. I have been preparing this migration for a couple off weeks
now (watching videos, reading migration manual from Microsoft, searching TechNet, etc.)
After some troubles with installing the server in Migration mode if finally came to the part to move my old (legacy) mailboxes to the new SBS2008 server. At this point the drama started @#$@$#&^%%#$@
I followed the manual off Microsoft which descripted how to move these mailboxes.
Exchange displayed a error message :
MapiExceptionNetworkError: Unable to make admin interface connection to server. (hr=0x80040115, ec=-2147221227)
When I googled this error message I realized that many people encountered the same problem but no one had the right answer to this question. I have searched hours and hours to find a solution. It started to drive me crazy and to make it even more worse i discovered
that even though i completed the first step in the migration proces (update the schema to allow a SBS2008 DC to join the domain) my replication with the other DC controllers came with a schema mismatch error???? WTF is going on !!!!!!!!
Finally a brilliant college off me came with the answer that solved all my problems: To GET RID OFF THIS ERROR MESSAGE INSTALL: Messaging API and Collabration Data Objects 1.2.1 on the Exchange server.
After moving about 60 mailboxes my blood pressure dropped and became stable again.
I Have on finall question WHY Microsoft? Was this to much trouble to put this in het migration manual off 81 pages?
from-a-very-disappointed-microsoft-user
PLS: send me a reply if this solved you're problem moving the mailboxes to the new server. !

Unable to Make Remote Calls

Hi,
I am trying to access Lotus Notes database through Ultrasearch CrawlerAgent. I am unable to make remote call within Ultrasearch, but i am able to run my program as a standalone. Any ideas?
- Ramesh

One More exception...
WKG-30061: Unable to execute crawler callback
java.sql.SQLException: ORA-20000: Oracle Ultra Search error
WKG-50000: internal error, arguments : crawler_callback can not find schedule id
null
ORA-06512: at "WKSYS.WK_ERR", line 179
ORA-06512: at line 1
Any ideas?
- Ramesh Natarajan

NT Adapter unable to make connection

Hi,
I am trying to create a java application using the
Data Form component. I keep getting the error message
TN adapter unable to make connection when I use the data form
wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
TIA,
Phil
null

Hi,
I still can't get a JDeveloper 2.0 Beta to access a local
database.
Here is my configuration:
Oracle 8.0.5 Enterprise Edition for Windows NT 4.0 (SP3)
JDeveloper 2.0 Beta (Build 184)
Oracle Developer 2.1 and Oracle Designer 2.1.1 (installed
in the same Oracle home directory as the RDBMS)
All of the above are installed on a STAND ALONE machine with
NO network card installed. I am NOT connected to a network
either.
I have tried using the Oracle Thin driver, the OCI-8 driver, and
the Sun JDBC driver and still unable to make a connection to
the local RDBMS 8.0.5. I have tried every combination in the
Data Form Wizard. I even tried to access the RDBMS with the
Microsoft Loopback adapter. Does JDeveloper use SQL*Net or Net8?
Thanks in advance for your help.
Phil
JDeveloper Team (guest) wrote:
: Hi Phil,
: I posted some DB connect info a few weeks back, but it looks
: like it's faded off of the list. Here it is again (basically,
: to connect to an 8.0.4 DB, you need to use the 8.0.5 drivers):
: There have been quite a few postings on problems with
connections
: using JDBC in the JDeveloper 2.0 Beta release. This may help
: answer some of the common questions that arise. Please note
that
: the connection issues listed here are specific to the Beta
: release of JDeveloper. The production release of JDeveloper
will
: include Oracle 815 JDBC drivers, which should fix some of the
: limitations listed below.
: If this message does not help you fix your connection problem,
: please be sure to provide the following information in your
: posting to help us troubleshoot your problem:
: * version of the database you are trying to connect to
: * platform the database is installed on
: * is the database local or remote
: * what driver(s) you have tried connecting with
: The JDBC 8.1.4 THIN driver is provided as the default driver
with
: JDeveloper 2.0Beta. This driver can connect to 8.1.4 and
: 8.0.5 databases.
: If you are connecting to an 8.1.4 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.1.4 database and want to use the
: OCI driver, see
: the instructions below for switching your driver version. No
: 8.1.4 OCI
: drivers were available at the time of our Beta release. If you
: want to use
: OCI, you need to use the 8.0.5 drivers.
: If you are connecting to an 8.0.5 database and want to use the
: thin driver, you should be OK.
: If you are connecting to an 8.0.5 database and want to use the
: OCI driver, see the instructions below for switching driver
: versions.
: If you are connecting to an 8.0.5 database on Linux, there is a
: bug which does not currently allow this connection.
: If you are connecting to an 8.0.4 or earlier database (back to
: 7.2) and want to use the JDBC thin or OCI drivers, see the
: instructions below for switching driver versions.
: If you are connecting to a Personal Oracle database, use the
OCI
: bequeath method to connect.
: If you are connecting to an Oracle Lite 3.5 database, you will
: need to upgrade the drivers that came with JDeveloper 2.0
Beta.
: See the instructions below.
: Instructions for Switching Driver Versions (regular Oracle):
: 1. Exit from JDeveloper.
: 2. Open the jdeveloper.ini file in a text editor. This file is
: located in the JDeveloper bin directory.
: 3. Edit the IDE Classpath so one of the following appears
before
: ..\aurora\classes111.zip:
: ..\jdbc\lib\oci8\classes111.zip (to use the 8.0.5 thin or
OCI8
: driver)
: ..\jdbc\lib\oci7\classes111.zip (to use the OCI7 driver)
: 4. Save and close the jdeveloper.ini file.
: 5. Restart JDeveloper
: Optional steps to use the right driver at runtime within the
IDE
: - must be performed for each project that you will use the
: non-814 JDBC driver with:
: 1. Select Project Properties from the Project menu for the
: project you are working on.
: 2. Make sure the library for the non-814 JDBC driver you want
to
: use appears in the
: libraries list (if not, click Add to add it).
: 3. Select the non-814 JDBC driver you want to use and drag it
to
: the top of the list. It must appear BEFORE BOTH of the
following
: libraries:
: a. Oracle 814 JDBC
: b. Enterprise Java Beans (this library also pulls in the 814
: JDBC driver)
: Notes on using the 8.0.5 drivers:
: 1. If you are using the 8.0.5 thin driver to connect to a local
: database, type the name of your host, or the IP address. Do
not
: use 'localhost' for the host name.
: Instructions for upgrading to Oracle Lite 3.5 drivers:
: 1.Install Oracle Lite 3.5
: 2.Find the following files in <ORACLE_HOME>:
: olad2035.dll
: olite35.msb
: oljac35.dll
: oljdbc35.dll
: olobj35.dll
: olod2035.dll
: olodmg35.dll
: olrep835.dll
: olsql35.dll
: (these files will be refered as olite35-dlls from now on)
: 3.Copy olite35-dlls into <JDeveloper_Home>\bin
: 4.Create directory <JDeveloper_Home>\jdbc\lib\olite35
: 5.Copy <ORACLE_HOME>\Lite\Classes\olite35.jar into
: <JDeveloper_Home>\jdbc\lib\olite35
: 6.Open <JDeveloper_Home>\bin\JDeveloper.ini, replace
: "olite30\olite.jar" with "olite35\olite35.jar" in the
: IDE_CLASSPATH.
: 7.Launch JDeveloper 2.0
: 8.Create a Oracle Lite 3.5 Library:
: a. Select Tools | Default Project Properties from the menu.
: b. Click the Libraries button.
: c. Click the New button to create a new library.
: d. Name: Oracle Lite 3.5 JDBC
: e. Classpath:<JDeveloper_Home>\jdbc\lib\olite35\Olite35.jar
: f. Click OKto create the library
: 9.Select the Oracle Lite 3.0 JDBC library in the Library list
: and
: click the Remove button.
: 10. Click Add and select your newly created Oracle Lite 3.5
JDBC
: library from the list. Click OK to add it.
: If you already have a project defined and opened in the IDE,
: select Project Properties from the Project menu, and make sure
: your new Oracle Lite 3.5 library is listed in the libraries
: list.
: If not, use steps 9 and 10 above to add it to your project.
: phil (guest) wrote:
: : Hi,
: : I am trying to create a java application using the
: : Data Form component. I keep getting the error message
: : TN adapter unable to make connection when I use the data form
: : wizard. Can I use JDeveloper 2.0 Beta with Oracle 8.0.4?
: : TIA,
: : Phil
null

Bug? (unable to make fast replication btw ora 7 and 8)

Similar Messages

Maybe you are looking for