BUG - Unable to open Canon CR2 RAW file from G1 X, ACR 7.0.0.308

Unable to open Canon raw CR2 file from G1 X (Photoshop cannot open this file), CR2 file from 1DSIII opens ok.
Windows 7 X64, Nvidia 2000D, Photoshop CS6 X64 BETA.

That is correct. the G1 X will be supported in a 7.0 dot release. The camera is currently supported in Lightroom 4.
Camera Raw plug-in | Supported cameras
Note: These cameras are supported in Adobe Photoshop Lightroom 4.0, but not in Camera Raw 7.0. These cameras will be supported in the next dot release of Camera Raw 7.

Similar Messages

Can't upgrade Photoshop Elements 9.0 to ANYTHING: unable to open Canon CR2 Raw files

I will start this post w/ the comment that I am completely fed-up with Adobe, and am not surprised at the troubles its having considering how completely **** it's ancillary services on its products are. Outside of the actual editing capabilities of their software (the only reason I and most people use their software) they have bungled UI, design, updates, and product support.
On to my issue.
I have a Mac, I have OSX 10.9.4 installed, I also own a copy of Photoshop elements. I recently wiped and reinstalled my OS, and thus reinstalled Photoshop Elements 9.0.
It doesn't support Canon .cr2 files, Canon Raw image files. I have wasted nearly 2 hours running in circles, and registering for every ******* stupid adobe mailing list, and cloud product, forum ID, that exists, all at adobes insistence without getting any sort of answer.
1. There is no update function. The menu item HELP>UPDATE ... DOES NOT EXIST, every update must be done manually.
2. I can't download and install any of the most recent Camera RAW plugins because they require the most update version of PSE9.0.
3. I manually downloaded both update 9.0.2 and 9.0.3 and was required to download two additional pieces of Adobe software, which at best are useless, and at worst are malware the cloud services OSX plugin, and the Adobe App and Install Manager.
4. When I run either update patch, I get the error message "This update is not applicable for you" and then information to contact customer support, which then circuitously and deviously reroutes me through a series of stupid questions.
5. Ultimately I came here and have searched the forums and don't have an answer to my question yet.
Questions.
1. Why can't I install updates 9.0.2 or 9.0.3 to my PSE 9.0 for Mac OSX
2. I don't give a f#*K about the updates, I just want to open canon RAW CR2 files.
I wish someone else produced even moderately decent photo editing software, I'd rid myself of adobe.

The raw files from the 5D should open OK but the files from the EOS-M require PSE11 or PSE12. Alternatively, download and install the free Adobe DNG converter to convert your raw files from the EOS-M to the Adobe universal Raw format and the files will open in all versions of PSE (keep your originals as backups and for use in the camera manufactures software)
Windows download (.exe file) click here DNG Converter 8.6
Mac download (.dmg file) click here DNG Converter 8.6
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

I am unable to open canon 6d raw files w/ elements 11

I am unable to open canon 6d raw files w/ elements 11. It seems that camera raw 7.1.0.384 is installed. I tried to update and nothing happens.Any help please?

Sometimes the Adobe servers can get busy; so try again from Expert Mode:
Help >> Updates
You should be able to select ACR 7.4 (see image) and then click the update button.

Why won't CS4 open the CR2 RAW files from my Canon G11?

I am running Snow Leopard V6.2. I have Adobe Design Premium with what I thought were all of the most recent updates loaded but when I tried to open one of the RAW files from my Canon G11 in PS CS4 it did not recognize the file type and it and would not open. Wouldn't CS4 premium update also update PS CS4 with all the most recent files including ACR and the latest definitions?
What version of ACR would have the latest RAW definitions for the G11 and how should it be loaded?

Bennett Richards wrote:
What is the correct way of installing the ACR plugin? Just ru
n the DMG or is there a file that must be placed in
applications?
This is what is written on that page:
To open a DMG file:
Double-click the file. This will open Disk Copy, which mounts the image on your desktop.
Manual installation on Mac:
1. Exit Photoshop CS4 and Adobe Bridge.
2. Open the download file and double-click Setup, and follow the on-screen instructions.
3. Launch Photoshop CS4 or Adobe Bridge.
Is that so difficult?

Unable to open Canon 650D Raw files in PS CS5 [was:Camera Raw]

Hi everyone
I have tried to downlaod my raw files CR2 to my photoshop cs5 but it keep saying
"Could not complete your request because the file appears to be from a camera model which is not supported by the installed version of camera raw."
My camera model is Canon 650d which is supported and i have downloaded the latest raw update but everytime i go to the Help > About Plug in
it keep saying that my version is 6.3.0.79

The 650D requires Camera Raw 7.1 or higher.
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
CS5 is only compatible with Camera Raw up to version 6.7. Thus you cannot open 650D Raw files in CS5.
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html
Thus you must either upgrade to CS6 or CC or convert your Raw files to DNGs using the free Adobe DNG converter. Then open and edit the DNG files in CS5.
http://www.adobe.com/products/photoshop/extend.displayTab2.html
http://blogs.adobe.com/crawlspace/2011/03/why-doesnt-my-version-of-photoshop-or-lightroom- support-my-camera.html

Cannot open Canon .CR2 raw files

I just purchased PSE 7 and I cannot open a raw file with the .CR2 extension produced by my Canon 500D. I have installed all available updates to PSE 7. Is there a way to open a raw file produced by my Canon 500D? Thanks.

You'll need to update manually the Adobe Camera Raw plugin:
http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Problems_opening_raw

Unable to open Canon 450D RAW files

I'm running CS3 and Lightroom 1.4.1, recently installed the updated DNG and Camera Raw plugin, but still cannot open my .CR2 files.
Plugin went to HD>Library>App. support>Adobe>Plugins>CS3>File formats
Any ideas?
Matt

Hi Matt
Try this mate...
1.In my Documents, make a folder called (Raw files)
2.Open Raw folder.
3.Connect camera and turn on.
4.Click. Start - My computer.
5.Right click camera.
6.click open.
7.select raw files.
8.paste into raw folder.
9.NOW OPEN Adobe photoshop or other program.
10.click FILE.
11.click OPEN.
12.find raw older in my documents.
13.click OPEN.
14.Double click on raw file.
15.Hey presto.
Let me know if it works for you...

Unable to Open Canon 60D RAW files in PSE9

Since I got my new camera Canon 60D, I have not been able to open the RAW (CR2) files in my Photoshop Elements 9. The ones from my previous camera I could. I have installed the Solutions software that came with the camera and have gone to both the Canon and Adobe sites to see if there is something I am missing. Do you have any suggestions for me?
Message was edited by: Brett N

Can you check which version of Camera Raw is installed - it needs to be version 6.2 or later for the 60D
Open Full edit on the menu bar click:
Help >> About Plug-In >> Camera Raw
Press Esc to close the pop-up.

Some Canon CR2 RAW Files Will Not Open In Elements 8

I use a Canon 7D DSLR. Up until 30 minutes ago I never had a problem opening Canon CR2 RAW files in Photoshop Elements 8.
Some files still open others do not. I can think of only one thing. I was shooting a large number of frames and reduced the RAW Image size down from RAW Large Only to RAW Medium with Small Jpeg to give me more room on the Compact Flash Card.
The Large RAW only CR2 files open fine in PSE 8, the Jpegs open fine, but the smaller sized CR2 files will not open and I get a wrong file type message in PSE8.
Any ideas why this would happen? I suspect it is a function of the camera setting, but all RAW files download as CR2 files.
I appreciate any guidance in this matter. Needless to say I am resetting my camera back to Large RAW files only.
Alex

ACR 5.x only supported full-sized 7D RAWs, but ACR 6.x supports 7D mRAW and sRAW, so just update to the latest version of the plugin, following the PSE-specific instructions:
http://www.adobe.com/downloads/updates/
sRAW and mRAW files are not RAWs because the camera has already demosaicked them to RGB and encoded them as lossless JPG.
Here is technical information on the reduce-sized RAWs:
http://lclevy.free.fr/cr2/#sraw

When I open CR2 RAW files from Powershot G10 they are in black and white. How do I get colour

I'm using Elements 13 on a PC running Windows 8.1. Each time I open a CR2 RAW file from a Canon Powershot G10 it displays in black and white. The image transferred to Elements is still in black and white. Why can I not see the image in colour?

Try holding down your Alt or Option key. The Cancel button in the Raw dialog will change to Reset.
Click on that Reset, and hopefully it goes back to defaults.
Gene

Opening Canon T4i RAW files in PSE10

Hello everyone
I recently traded in my Canon T3i for a T4i, and now PS Elements 10 won't open the CR2 RAW files from this camera. According to "Help - Plug In" I have V 6.7, so I went to the Adobe site which said I needed V 7.1, which I download, and extracted, but it won't install it in the software; when I click on the extracted AdobePatchInstaller application, I get a message stating "Update Failed" and "this patch is not applicable for you". Also, when I click "Help-Updates" it tells me everything is up to date. What can I do?
Scutty
Message title was edited by: Brett N

Some jokingly call it the Adobe Tax. If you buy a recently released camera, the specifications for RAW files are probably different than previous models. Adobe takes those specs, camera by camera, and adds thme to ACR. Adobe does not make current new versions of ACR available to legacy software. Hence the "tax". You wrote that your newly released camera is in 7.1. To use ACR 7.1 conveniently ("natively"?) you have to have the versions of Adobe's tools that use the 7.x series. That would be Photoshop Elements 11, Premier Elements 11 and Lightroom 4.x
It was my turn to learn the lessons of the Adobe Tax for a Sony RX100 I bought last year!
Adobe is not entirely rude about this! They give away the "Adobe DNG Converter" that is updated in parallel with ACR. You can, with out paying a cent, download the converter and it will make Elements 10 compatable .DNG files from your CR2 files.
Good luck!
Bill

After Effects CS6: Canon .CR2 RAW files not recognized as acceptable files for import?

HI Folks,
I'm trying to import as I've seen on tutorials, my RAW files from my Canon 5D3 .CR2 files. I can open them in PS and LR5….and I'd seen examples of folks opening them with AE CS6 standalone, but it doesn't seem to recognize mine.
Any thoughts? Is there something I need to update, or flag or change?
I'm on a mac, OSX 10.7.5
AE verson: 11.0.4.2
This is what my import screen looks like:
Thanks in advance,
C

I read through those linked pages, but they didn't give me any solution.
After nosing around through a LOT of sites on Adobe's site (why aren't pages dated, took forever to find the most up to date or pertinent pages)…I found this one that was slightly related, but worked for me.
http://helpx.adobe.com/bridge/kb/acr-84-bridge-cs6-metadata.html
I had to download this zip, and manually place the plugin as directed, and now, After Effects CS6 will recognize my CR2 raw files from my canon 5D3.
Thank you for the help, it led me in the right direction, but the link above was the actual solution I found that worked!!
chilecayenne

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

I could not open my camera raw files from canon mark iii with my photoshop CS5. Tried to update Camera raw 6.7 but failed to install. Message said 'There was an error downloading this update. Please quit and try again later'. How could I open Raw files ?

Try installing it manually from:
Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 6.7.1 Update
Adobe - Adobe Camera Raw and DNG Converter : For Macintosh : Camera Raw 6.7.1 Update
Regards,
Ashutosh

Canon CR2 RAW files

I just bought a Canon T3i and want MODERATELY PRICED software to handle the CR2 RAW files from it. My now VERY OLD Photoshop 6 will not. Problem: I do NOT want to upgrade from Windows XP at this time. Lightroom 4 runs under Vista or Windows 7, but not XP. Will Lightroom 3 handle these files?

Thank you SO VERY MUCH!
"The only guide to a man is his conscience; the only shield to his
memory is the rectitude and sincerity of his actions." Sir Winston S.
Churchill in tribute to Sir Neville Chamberlain, November 12, 1940

Cannot open Canon CS2 Raw files in Bridges and Photoshop

I cannot open Canon CS2 Raw files in Bridges and Photoshop. I have never been able to open it.

Here are what cameras are supported by what version of the ACR plug-in and Lightroom:
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
Here are what Adobe programs use what version of the ACR plug-in:
http://helpx.adobe.com/x-productkb/global/camera-raw-compatible-applications.html

BUG - Unable to open Canon CR2 RAW file from G1 X, ACR 7.0.0.308

Similar Messages

Maybe you are looking for