Bug? using :: in connection name

I've confirmed some strage activity with certain characters in connection names using SQLDeveloper 1.0.0.15.57 on a Mac Powerbook G4 10.4 .7 connecting to Oracle 9.2.0.7.0.
If I name the connection test::user and attempt to edit a trigger I get a java stack trace that ended with (no connection). Sorry, I didn't copy the message before moving on ... but ...
If I rename the connection test_user and attempt to edit the same trigger all is well.
If I rename the connection back to test::user I no longer get the java stack trace, just a blank screen with no trigger text.

Hi Anuj,
Yes i am using SOA Suite 11g and i have chosen the right platform class as i am able to insert into other tables in DB2.The problem is in one table which has # appended in the column name.e.g.
'abc#'.# charater is not supported in the wizard as the column name and that is why this error.I changed from backend and than tested i got the same error in the em.I need way to handle the columns have names like 'abc#'.
Thanks

Similar Messages

RE1000 probably bug on connection name

Hi, i'm writing because i suppose there's a bug on the connection name showed by extender. I have the modem/router X2000 and in the options i've hidden the network name but when i've tried to extend my network with RE1000 the network name is completly visible. How can i fix this issue? I think is a bug in the firmware.
Thanks for your support

SSID broadcast issues with the RE1000 usually happens when a wireless device tries to connect to an SSID that have been recently changed. If your computer, laptop and other wireless devices used to connect to the extender, ensure that you have deleted the previous wireless network name or SSID. Here is the link for connecting wireless computers to your network: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=32036bdcd9dd44ec94f94fc5f6da666f_Connecting_wirele...

Using different data source and connection name

Hi,
We have a requirement where the data source for our application is already configured on the server by name like MyDBDataSource. But the database connection name in our application is like My_DB. So application module is using data source name like My_DBDS. If i change data source name in application module configuration manually to be MyDBDataSource, then it fails at runtime. This has been identified as bug as mentioned in this post
http://andrejusb.blogspot.in/2009/01/practical-adf-security-deployment-on.html
Is this still valid? I am using 11.1.1.6 version. Also want to know if there is any workaround for this ? If i change the name in web.xml at deployment time using script, will it work ?
Thanks

Hi Ami,
Is your issue get solved ?
I would like to mention few things about the database connection in application & data source in Weblogic.
1. When you create a database connection in Application (for example say connection name as hr) then in the Application Module Database Configurations in the bc4j.xcfg File Custom JDBCDataSource will be set as <Custom JDBCDataSource="java:comp/env/jdbc/hrDS"/> for both ApplnModule shared & Local. So when you create data source in weblogic it is better to create the JNDI Name like jdbc/hrDS ( ie between the '/' and 'DS' you have to specify the name of database connection you created in the application ).What ever the Data source name is no matter.
2.If you change the JNDI name of data source later like jdbc/hrconnectionDS then it is better to delete the old hr connection from application and recreate a connection as hrconnection. After that you have to edit bc4j.xcfg file in the Application Module--> Configurations and set Custom JDBCDataSource as below for both local & shared config.
<Custom JDBCDataSource="java:comp/env/jdbc/hrconnectionDS"/>
I hope this will help you.
Gijith.

Bug editing list Items using webpart connections ,group by and inline editing

Hi Everyone. I came across a bug using out of the box features.
Let me explain well the details to reproduce the error. I used :
*2 Lists :
-List one : the consumer list with two columns :
-Number column
-Choice column
-List two :
The sender list with one column :
-Lookup column to gets the number column on the consumer list
*A webpart Page
*2 listviewwebparts in the webpart page
*Connect webparts to filter by the lookup column/number column
*Add inline editing in the consumer webpart
Till now everything works perfectly, inline editing works fine. Let's add some more view details :
*Add a group by in the view of the consumer webpart (group by the choice column)
=> Try to edit list items, you will notice that inside a group, inline editing is OK and inside another group it doesnt work!
If you get the same error, that would be nice to find where is the problem (I already found a similar bug and the problem was the sorting that needs to be in the same way for both connected webparts , ASC or DESC). But this one... ???

Hi Static,
According to your description, I create the consumer list and sender list, create a webpart page , add a chioce filter webpart and consumer list webpart. But after I add a group by in the view of the consumer webpart, the inline edit still work fine.
You can have a look at the blog:
https://support.office.com/en-ca/article/Connect-a-Filter-Web-Part-to-a-List-View-Web-Part-4f3f6c10-0a1b-479d-8b4d-c4f1bf49bb3f#bms3
Thanks,
Eric
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Eric Tao
TechNet Community Support

Contacts uses Facebook names after connecting to iTunes everytime, what to do, that it always uses the iCloud names?

When friends use a different name in Facebook, than what the real name is, I told my iPhone to use the name like I entered it for the iCloud contact.
Anytime I connect my iPhone with iTunes it automatically changes back the names to the Facebook ones, and I have to change it again manually for like 50 contacts, that is very very annoying! How can I change it that the iPhone should use the iCloud names for every contact or at least for the one with different Facebook/real names as default?

I would use iTunes Home Sharing to share the song you have and she can then add it to her library. Although, it seems as if she has never had a library since the phone was never connected to iTunes. My understanding of using iCloud is that for her to use a song that isn't in iTunes, you have to use iTunes Match, and there is a cost involved in this. If her phone was synced to her own iTunes library on a computer, you could use the Home Sharing as I indicated earlier.

What is the name of the adapter I would use to connect my iPad (retina) to an ethernet cable? My school doesn't have wifi.

What is the name of the adapter I would use to connect my iPad 2 (retina, wifi only) to an ethernet cable? My school does not have wifi (yet), and I don't have a data service. Thanks.

Airport Express?
http://i1224.photobucket.com/albums/ee374/Diavonex/Album%201A/1f4ad14e1067b2d0eb 1e39448ff51d0b.jpg
https://www.apple.com/airportexpress/

I purchased a 3TB Airport Time Capsule After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups and it wants authentication but no box is available to provide my administrator name can anyone help ?

I purchased a 3TB Airport Time Capsule to use with my Mac running latest Maverics. After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups from my small driveand it wants authentication but no box is available to provide my administrator name can anyone help ?

I overcame the permissions by allowing both paths to have read and write access to anyone but that didnt solve it until I copied it into the DATA directory which I created on the Airport Time Capsule.
I had already discovered the TIME MACHINE How to transfer backups but I am struggling still with the item and cannot currently get it to work. My setup seems to have created a wireless link to my router which is what I wanted and in that set up there are three options. I have simply gone for the extension of my network. I ignored the other option there which I cannot remember something like DNS? That may be the problem becasuse when I remove the Ethernet connector it just doesnt go anywhere.
I have also found I cannot update my TIME MACHINE software (currently 1.3) as although Apple tell me I should be able to set backups hourly daily or weekly I have only ever been able to run it hourly when i would prefer longer intervals so thought an update might be necssary.
Also tried to get an update for my Airport Utility (Currently 6.3.2 but cannot find one even though I have read there might be one available and again this might be the problem.
Have reset the Time Capsule now about a dozen times.
Following the instructions and trying to copy my existing backup it suggests you need to copy it to the root directory but that is when I get some sort of security issue and I found I could only get it to accept if I dragged my .backupdb to the DATA directory on the Time Capsule. I dont even know if I do this it will work when I come to use it.
I therefore found your reply of no more help than i had discovered but I hope you return to read this note because I really do need some help.
I am intending starting again in the next couple of days and fully documenting what I do and what I see and then as I suspect it will be no different and I will then seek an appointment at the Apple Store in Trafford Centre and if that proves unsuccessful then I still have time to return and become a dissatisfied customer with Apple for the first time in a long experience with Apple. I have noticed frightening notes on the conversations which point to problems of Mavericks working with Airport Time Machine!! So in the end it might not be me doing anything wrong. Unfortunately you do feel left out in the dark sometimes that is why I hope you can respond with a solution?

ICM active -- NO CONNECTION for all AppServers (using TREX host names / IP

Hi Experts,
Our Basis team has set up new BWA Box for a Quality. When i went to a transaction "RSDDBIAMON" I am getting below error.
Q27: ICM active --> NO CONNECTION for all AppServers (using TREX host names / IP addresses). Configure ICM/TCM connection in SAP
RFC Connection is working. I have tested it in sm59. Can anyone help to understan where will be the problem.
Regards,

In TREX Admin, I was able to check ICM error and got IP address.. After this got to know host-name of the server is different from configured in ICM.

Cant connect using another domain name

Hi. iChat is up and running, we're able to connect to it using user@servername, but when we try to use another domain name it doesnt work (dns is pointed to that server, if i ping it it does give the correct ip), i know the dns is working because if i check the server log it does say i connected to it, but 1 sec. after it disconnects any ideas?

Welcome to Apple Discussions
You must ensure that you list the other domains in the Host Domains section of the Settings tab Server Admin application. Assuming you have done that and you still have problem, it will help us help you if you post the entries you have in the log file and the domains and one of the usernames you are trying to use.
Tim

Receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber - what's going on here?

Hi. I am receiving emails about a newly set up itunes account that does not belong to me (although has my name). The address used in connection with it seems to be in California and the person likes Justin Bieber (as I now have a receipt for that purchase). It states that it is billed to store credit. (a) I don't want to receive this person's information and (b) I certainly don't want to somehow be charged for it (although it appears, thus far, that I have not been). What's going on?

i didn't read a lot of your 2nd paragraph, but it seems like the password is the issue, right?
do a true clean install
reboot your machine and hold down command+option+r, you should see a spinning globe - if you don't see the globe or anything that reads internet recovery, shut down and try again
at menu, chose disk utility and once there, find your HD on the left side, select the physical name and erase it as mac journaled
exit disk utlity
at menu, choose install OSX
this time, when it asks for a password just hit continue, it will let you complete without a password
you should be able to get into your laptop, now figure out what password you'll be able to use with your kb issue

Bug- Version 8.0.10 (Build 25189) MacOSX Connection Name does not import

When importing Remote Desktops from one machine to another..the connection name does not import..ONLY the
PC name or IP address comes across..

Hi Phil,
Thank you for posting in Windows Server Forum.
As you have commented PC Name or IP address is imported and thinks we need that only for connection. Also we can only export and import the .rdp file between Mac clients. Also for a try, you can reinstall the app and verify.
Hope it helps!
Thanks.
Dharmesh Solanki
TechNet Community Support

Ical bug with iCloud connection.

Hello, my name is Carlos Micó.
I´ve got a problem with iCal. When I open iCal, this stays in a bug trying to connect and sync with iCloud. The application can not close it. Can not access your preferences. I tried to delete the account from iCloud to not continue the bug, but does not solve the problem. Any solution?

Are you actually opening iCal or Calendar? If you are able to open iCal, and it hangs, that would be because it doesn't work with Mavericks. You need to use Calendar.
Does the iCloud System Preferences let you uncheck Calendar?
Can you access your Calendars at www.icloud.com?

Some RST are seen during TCP disconnection when using SSL connection

Some RST are seen during TCP disconnection when using SSL connection
It is expected that the disconnection sequence for a secure connection to be as follow:
client ************************* server
--- alert (warning, close notify) --->
<--- alert (warning, close notify) ---
in any order;
and then:-
--------------- FIN, ACK ------------>
<----------- FIN, ACK ---------------
------------------ ACK ----------------->
Instead of the sequence described above, the TCP connection for a secure connection is closed with an RST.
For instance, Wireshark capture shows that an SSL+SASL TCP connection is closed in the following manner:
client ************************** server
--- alert (warning, close notify) ---->
---------------- FIN, ACK ------------>
<--- alert (warning, close notify) ---
<----------- FIN, ACK ---------------------
------------ RST -----------------> *(This RST message should be investigated, an ACK message was expected)*
Server: OpenLDAP: slapd 2.4.23
Client: (java version "1.6.0_16")
import javax.naming.*;
import javax.naming.directory.*;
import javax.naming.ldap.InitialLdapContext;
import java.util.Hashtable;
import javax.naming.ldap.InitialLdapContext;
import javax.naming.ldap.StartTlsRequest;
import javax.naming.ldap.StartTlsResponse;
class Client {
private static final String DEFAULT_INITIAL_CONTEXT_FACTORY = "com.sun.jndi.ldap.LdapCtxFactory";
public static void main(String[] args) {
//SSL
try {
System.setProperty("javax.net.ssl.keyStore", "c:\\\keystore");
System.setProperty("javax.net.ssl.keyStorePassword", "adminadmin");
System.setProperty("javax.net.ssl.trustStore","c:\\\keystore");
System.setProperty("javax.net.ssl.trustStorePassword","adminadmin");
// Set up environment for creating initial context
Hashtable env = new Hashtable(11);
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.ldap.LdapCtxFactory");
// Must use the name of the server that is found in its certificate
env.put(Context.PROVIDER_URL, "ldap://1.2.4.4:16415");
env.put(Context.SECURITY_AUTHENTICATION, "simple");
env.put(Context.SECURITY_PRINCIPAL, "cn=manager,dc=operator,dc=com");
env.put(Context.SECURITY_CREDENTIALS, "password");
env.put(Context.SECURITY_PROTOCOL, "ssl");
// Create initial context
InitialLdapContext ctx = new InitialLdapContext(env, null);
// Close the context when we're done
ctx.close();
catch(Exception e)
e.printStackTrace();
Is it a bug ? Can I expect to have a patch for this issue?
Regards,
Olivier
Edited by: 975464 on 6-Dec-2012 11:21 AM

I agree it should be an ACK not an RST but it doesn't really matter. The connection is closed, and as neither the client nor the server has any pending data it is benign. Worth investigating in a later JRE.

Dbxplorer dialog won't allow me to enter database connection name

I'm trying to create a new database connection with dbxplorer. It pops up a dialog asking for the database connection name, but it won't accept any text input. I can't get any further without the ability to enter a name in this dialog.
This is an existing project that was not created with any Workshop wizzards. I would still think that I could use dbxplorer on an existing project.
Is there a way to make this work or a patch for this?

We are actively working this issue and hope it will be resolved in our next release targeted for this summer.
We are evaluating some workarounds, but there were some changes in the JDK that prompted this, and we are still assessing to see if related to jvm regression, api change, or a bug.
Please use the older JDK as a workaround as an interim solution

RD WebAccess doesn't show RemoteApps while using RD Connection Broker

Environment:
All servers have Windows Server 2008 R2 installed
Remote Desktop Session Hosts:
RDSH01
RDSH02
RDSH03
# Installed roles:
Remote Desktop Session Host
Remote Desktop Web Access
# Local Users and Groups:
TS Web Access Computers --> Member: RDSH01, RDSH02, RDSH03
Remote Desktop
Session Broker:
DC01
# Installed roles:
Active Directory Domain Services
Remote Desktop Licensing
Remote Desktop Connection Broker
# AD groups:
Session Directory Computers --> Member: RDSH01, RDSH02, RDSH03
TS Web Access Computers --> Member: DC01, RDSH01, RDSH02, RDSH03
## Problem ###
For some users the RemoteApps will not be displayed on RD Web Access Web site when the
RD connection broker DC01 is used as source! If one of the three servers is selected as RemoteApp source it works without any error.
On DC01 I find the message “Error in the WMI interface to rdfarm.domain.local. Check that the machine is running and connected to the network. If the
problem persists, reboot the machine. Error Code: 0x800706BA“. All connections, pings, nslookup including FQDN request works fine.
WMI and DCOM are also checked, security permission and group membership is correct. Firewalls are all disabled!
Any idea what to check next?

Hi,
Thank you for posting in Windows Server Forum.
The error which you are facing seems to occur because the communication between the RD web access and RD connection Broker is not communicating. Please verify the below two things.
1. Verify that the RemoteApp and Desktop Connection Management service is started.
2. Log on to the RD Web Access server that is configured to use the RD Connection Broker server.
The RD Web Access server that is configured to use the RD Connection Broker server must be available to communicate with the RD Connection Broker server.
a. To open Remote Desktop Web Access Configuration, click Start, point to
Administrative Tools, point to Remote Desktop Services, and then click
Remote Desktop Web Access Configuration.
b. In the Domain\user name box, type a valid domain and user account name.
c. In the Password box, type the password for the user account.
d. Verify that you can successfully log on to the RD Web Access server by using Remote Desktop Web Access Configuration.
More information:
Event ID 1000 — RemoteApp and Desktop Connection Management Communication
If still not resolved then please check the below Q&A regarding RD Connection Broker.
Q. I’m using RD Connection Broker as the RemoteApp source in RD Web Access, but RD Web Access isn’t showing any icons. Why?
A. There are several reason for this, at last it found a bug. “There’s a
known bug where Windows Management Instrumentation (WMI) permissions for the Terminal Services namespace disappear, leaving RD Web Access unable to query RD Connection Broker as a RemoteApp source. Re-adding the
RD Web Access server to the TS Web Access Computers group on RD Connection Broker resolves this issue for a while (but will most likely happen again over time). See
this TechNet Forum thread for more details and possible work-arounds.”
More information.
Microsoft Windows Server 2008 R2: Understand the RD Connection Broker
Hope it helps!
Thanks,
Dharmesh

Bug? using :: in connection name

Similar Messages

Maybe you are looking for