Bug when converting from text to date

Hello Guys,
I have a table with about 700 rows and the first column is for date.
Most rows correctly have the cell content as date, but some rows show it as text, and even when I try to change it to date, nothing happens. It sticks as text.
Main problem is I can't sort correctly of even do calculations.
For me it really seems to be a bug.
The only solution I see is to create a new column to convert the values with formula, but this is a shame to need to do this to workaround such simple bug.
Best regards,
Bruno

Hi Wayne,
LOL.
Here's the cell that came from text file exactly like the next one. After setting as date in the format panel, it stays as expected:
The row below came from another paste from the same text file, but it insists on not becoming date:
After setting date, and leaving the cell selection, it goes back to "Automatic".
In the bar at the bottom, it is shown as "Text".
I have already tried to select the entire column and set as Date, and also to do it individually, but only some are converted. Other stays as Texts.
Best regards,
Bruno

Similar Messages

Overflow when converting from "1.64174e+11"

Hi ,
I am working on PS module and facing the above mentioned error.Whenever I am attching any material haveing value more than Rs 100000 the system gives "Overflow when converting from "1.64174e+11""
The detailed error description is given below,
Runtime Errors         CONVT_OVERFLOW
Except.                CX_SY_CONVERSION_OVERFLOW
Date and Time          24.11.2008 11:19:23
Short dump has not been completely stored (too big)
Short text
     Overflow when converting from "1.64174e+11"
What happened?
     Error in the ABAP Application Program
     The current ABAP program "SAPFV45P" had to be terminated because it has
     come across a statement that unfortunately cannot be executed.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_CONVERSION_OVERFLOW', was not
      caught in
     procedure "KALKULATIONSWERT_UEBERNEHMEN" "(FORM)", nor was it propagated by a
      RAISING clause.
     Since the caller of the procedure could not have anticipated that the
     exception would occur, the current program is terminated.
     The reason for the exception is:
     When attempting to convert the value "1.64174e+11", an overflow occurred.
Missing RAISING Clause in Interface
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     8
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Trigger Location of Exception
     Program                                 SAPFV45P
     Include                                 FV45PF0K_KALKULATIONSWERT_UEBE
     Row                                     140
     Module type                             (FORM)
     Module Name                             KALKULATIONSWERT_UEBERNEHMEN
Source Code Extract
Line SourceCde
110       MTCOM-MATNR = VBAP-MATNR.
111       MTCOM-BWTAR = VBAP-BWTAR.
112       CALL FUNCTION 'MATERIAL_READ'
113            EXPORTING
114                 SCHLUESSEL    = MTCOM
115            IMPORTING
116                 MATDATEN      = MBEW
117            EXCEPTIONS
118                 ERROR_MESSAGE = 04
119                 OTHERS        = 04.
120       MOVE SY-SUBRC TO SAV_SUBRC.
121     ENDIF.
122
123     IF T685A-KRECH = 'C'.
124       IF SAV_SUBRC = 0 AND MBEW-PEINH NE 0.
125         KOMV-KPEIN = MBEW-PEINH.
126       ELSE.
127         KOMV-KPEIN = 1.
128       ENDIF.
129 * Falls keine ET da, Zielmenge nehmen (Gut-/Lastschrift, Kontrakt ...)
130       DATA: DA_MENGE LIKE VBAP-KWMENG.
131       IF TVAP-ETERL EQ SPACE AND VBAP-KWMENG = 0.
132         DA_MENGE               = VBAP-ZMENG.
133       ELSE.
134         DA_MENGE               = VBAP-KWMENG.
135       ENDIF.
136       IF DA_MENGE > 0.
137         DA_WERT         = DA_WERT * KOMV-KPEIN * 1000
138                          / DA_MENGE * VBAP-UMVKN / VBAP-UMVKZ.
139       ENDIF.
>>>>>       KOMV-KBETR      = DA_WERT.
141     ELSEIF T685A-KRECH = 'B'.
142       KOMV-KBETR      = DA_WERT.
143     ELSE.
144       KOMV-KWERT      = DA_WERT.
145     ENDIF.
146
147     KOMV-WAERS         = DA_KALKO-FWAER.
148     RV45A-KOEIN        = DA_KALKO-FWAER.
149     KOMV-KMEIN         = VBAP-MEINS.
150     PERFORM KOMV_PRUEFEN USING SPACE
151                          CHANGING SY-SUBRC.
152 * Nur für den ersten Lauf prüfen, ob Status gesetzt werden muß
153     IF SAV_INDEX = 1.
154       DA_SUBRC = SY-SUBRC.
155     ENDIF.
156     IF SY-SUBRC = 0.
157       PERFORM KOMV_BEARBEITEN.
158     ENDIF.
159   ENDDO.
Pl suggest.
Rgds

Hi,
Try to declare your variable using Packed Number:
DATA: va_num TYPE P DECIMALS 3.
Hope this helps.
Patrick

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?

Hypertext links are not always preserved from Word to PDF, using Aperçu or Adobe, depending on OS 10 or Lion. Why? This generally works perfectly in Windows. Why are Apple and Adobe unable to correctly handle links when converting from Word to PDF?
Depending on the system version, and Office Word version:
- a pure URL link starting with http or even www sometimes works in PDF, either produced by Aperçu or Adobe, sometimes does not work;
- other kind of links where the text under display is not a URL, never work!
I like everything with Apple computers and software, except PDF generation. Output files are usually bigger in size, and no better quality, than under Windows. Furthermore, it is weird that something as common as hyperlinks does not work correctly!
I related this question with Mac OS X Snow Leopard, but the problem is still there with Mac OS Lion.
This problem seems to have been around for years, without any proper solution from Apple and/or Adobe! To me, this is very embarrassing!

Greetings NoNameGiven,
If I understand the problem correctly (I’m not sure I do) you would prefer ‘iii’ to be read as “eye eye eye” rather than “three”? The alt text property is the only way that I know of to make this happen. Hope this helps.
a ‘C’ student

Error when converting time stamp in date time time zone CST in IC

Hi Experts,
We have recently upgraded from CRM 5.0 to CRM 2007. We are using IC WEB Employee interaction center.
so when agent create service ticket in interaction center and close the ticket on same day we are getting an error saying Error when converting time stamp in date time time zone CST.
we thought there may be problem while installing SAP CRM by basis team in time zone, but we did not find any problem.
So please advice how to resolve this issue.
Regards,
Teja

Hi Teja,
I saw a similar message, and it was resolved by adding a timezone to the user profile defaults tab in SU3. I believe the system has been configured to convert between users' timezone and the system timezone, therefore it needs to know each users' timezone.
Regards,
Simon.

Cannot convert from java.util.Date to java.sql.Date

In the below code am trying to get the current date and 60 days prior date:
Date todayDate;
          Date Sixtydaysprior;
          String DATE_FORMAT = "MM/dd/yy";
          DateFormat sdf = new SimpleDateFormat(DATE_FORMAT);
         Calendar cal = Calendar.getInstance();
          todayDate = sdf.parse(sdf.format(cal.getTime()));
          cal.add(Calendar.DATE, -60);
         Sixtydaysprior = sdf.parse(sdf.format(cal.getTime()));I have imported following files:
<%@page
     import="java.util.Calendar,
               java.text.SimpleDateFormat,
               java.text.ParseException,
                        java.util.*"
%>Shows up following error msg:
Type mismatch: cannot convert from java.util.Date to java.sql.Date
Thanks.
Edited by: MiltonDetroja on May 22, 2009 11:03 AM

Shows up following error msg:
Type mismatch: cannot convert from java.util.Date to java.sql.Date
I don't think this exception is thrown from the portion of code you have shown. As clearly specified in exception message, you cannot cast an instance of java.util.Date to java.sql.Date. you will need to do something like this
java.util.Date today = new java.util.Date();
long t = today.getTime();
java.sql.Date dt = new java.sql.Date(t);

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?

When converting from a .wav to a .mov is there a loss of audio quality when using QuickTime?
That would depend on your work flow. MOV is the generic QuickTime file container and is not related to any particular data compression format. If you perform a simple "Save" or "Save As..." action that merely copies the data in the WAV file to an MOV file, then the data remains unchanged and maintains its original quality. If, on the other hand, your transcode/re-compress the original data to a different compression format, then there is always the potential for some loss in quality. Depending on the codec and/or settings, the potential loss could be inaudible to severe.

[svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

Revision: 17872
Revision: 17872
Author:   [email protected]
Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
    cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

How do I maintain column formatting when converting from PDF to Excel?

How do I maintain column formatting when converting from PDF to Excel? All info is no longer on the lines or in the columns they started out being in? Any help would be appreciated.

Sara,
Perhaps I am expecting too much from Adobe ExportPDF. The reason I subscribed to this service, for which I pay a yearly fee, was that I need a way to convert scanned and digital documents to Word &/or Excel. I read the link you included but to be candid the more I tried to understand what was written the more confused I got. The process should not be this difficult. Currently I am using a NEAT scanner to create PDF documents of whatever I scan. After I changed the OCR setting on Adobe ExportPDF the output was much better but not to the point it was usable as it was. Information that appears to be lines and columns are sometimes not recognizing two columns and just putting them together in one. Obviously not usable. The other thing it does is bunch numbers that appear in a column that are just a bunch of numbers that I have no way of fixing.
Please let me speak to someone who can help me. Right now I not getting anything of value in my paid subscription.

How can I convert from Modbus raw data to engineering units using a formula?

Within Lookout, I have several Modbus numerical input types that do not have a linear corespondence to the Engineering values they represent. How can I display these values accurately using a formula to convert from the raw data to an engineering value?

I don't quite understand your reply. I'm using Lookout 6.0.2, logged in as Administrator, in Edit Mode. The Modbus object is named RTU06_SAV. The Active member is 30002 with an alias of SAVfmSMT_RSL.
Following your instructions, I opened Object Explorer and right-clicked on RTU06_SAV.
This opened a menu containing: Refresh, Cut, Copy, Rename, Delete, Edit connections..., Edit Data Member Configuration, Configure Network Security and Properties.
I assumed that I should select Edit Data Member Configuration, but maybe I'm wrong.
Within Data Member Configuration I can set up Linear Scaling between Raw data and Engineering data. I know how to do that, but what I need to know is how to convert Raw data to Engineering data using a formula representing a non-linear transformation (such as a converion to a logarithmic value or perhaps a formula derived by fitting the formula to a curve on a calibration chart).
Once I have this my Engineering data can be represented on a control panel as both a numeric value AND as a correctly reading Gauge. It can also be properly represented on a HyperTrend graph.
What do you suggest?

Default PR Type when convert from Planned Order

Hi all,
How can I default my PR Type when convert from Planned Order after MRP run. This can done via MRP Group control but how to go about controlling via Planned Order profile?
Which planned object type and planned order profile to be used? assuming that i need my planned to be output at LA type and convert to NB1 PR type instead of the default NB PR type?
Thanks.
Regards,
Andrew

Hi,
The system determines the document type from the stettings u are making in "planned order Profile" in Customising for MRP. There u define the order type, the procurement key and the special procurement key and also the account assignment category. So based on the procurement key and the special procurement key maintained in the Marterial master, the document type is selected.
Production > Materials Requirement Planning > Procurement Proposals > Planned Order > Define order profile
Choose the planned order type - NB1 Within this you specify the P req doc type to be used.
Through MRP group and the different PR document type for MRP generated PR is possible only if you assign the document type to MRP group in the MRP configuration.
Please try and come back.
Regards,
R.Brahmankar
Edited by: R Brahmankar on Aug 28, 2008 10:54 AM

Moving Scriptlet Code to backing bean when converting from JSP - Facelets

Hello!
We are converting our application from jsf1.2 to 2.0 and all jsps are being converted to XHTML. Some are trivial while others had very complex scriptlets.
I would like to know what are some of the recommended ways of moving Scriptlet Code to backing bean when converting from JSP -> Facelets.
I have thought about listeners, actionListeners, putting code getXXXX() of the backing bean and then calling #{bean.XXXX} but not sure whats the best way.
I do appreciate the response!
Eg of a jsp page:
<%@ taglib uri="http://java.sun.com/jsf/html" prefix="h" %>
<%@ taglib uri="http://java.sun.com/jsf/core" prefix="f" %>
<%@ taglib uri="/WEB-INF/xxx-jsf.tld" prefix="l" %>
<%@ taglib uri="/WEB-INF/yyy-pp.tld" prefix="p" %>
<%@ page import="com.ttyy.search.beans.jsf.AdvancedSearchFormManagedBean" %>
<%@ page import="com.kkee.util.*"%>
<%
    AdvancedSearchFormManagedBean advancedSearchFormManagedBean = (AdvancedSearchFormManagedBean) request.getSession().getAttribute("AdvancedSearchFormManagedBean");
    if (advancedSearchFormManagedBean == null) {
       advancedSearchFormManagedBean = new AdvancedSearchFormManagedBean();
       request.getSession().setAttribute("AdvancedSearchFormManagedBean", advancedSearchFormManagedBean);
    advancedSearchFormManagedBean.initializeForAdvancedSearchOptions();
    advancedSearchFormManagedBean.setQuickSearch();
     request.setAttribute("portletHeader", "Hello " + advancedSearchFormManagedBean.getPerson().getFirstname() + ", check out the latest programs in your practice areas and jurisdictions");
%>
<h:form id="MYCenterForm">
     <p:portletRenderer portletSetName="test of portlet"
          portletContainer="#{PortletContainerManagedBean}"
          id="MYCenter"
          portletScope = "TEST_SCOPE"
          suppressIfNoData="true"
          portletSkinName="SOME_SKIN">
          <f:facet name="persistenceToolkit">
               <h:commandLink id="persistenceToolkitLink"
                    actionListener="#{PortletContainerManagedBean.persistPortletSetStateListener}">
                    <h:outputText value="Save State Of Portlet Set" id="persistenceToolkitLinkText"/>
               </h:commandLink>
          </f:facet>
     </p:pagePortletSetRenderer>
</h:form>
<%
     String flag = PropertyItems.getInstance().getPropertyItem("response.time.flag");
     if("1".equals(flag)){
          ResponseTime rt = (ResponseTime) session.getAttribute("responseTime");
        if(rt!=null){
            rt.setDesc("my cle loaded");
            long now = System.currentTimeMillis();
            long start = rt.getStart() + rt.getTotal();
            rt.setInterval(now-start);
            rt.setTotal(rt.getTotal()+rt.getInterval());
            LogUtil.log(rt.toString(), LogUtil.DEBUG_LEVEL);
            session.setAttribute("responseTime", rt);
%>

That helps.
This could be another topic question but itst kind of related to what i am doing right now. while converting JSP to facelet (in jsf2) I came across another issue.
<h:commandLink id="Save" rendered="#{RegistrationBean.isNOTInOrigionalRegistrationMode}" action="#{RegistrationBean.updateProfile2Submit}" styleClass="#{portalSkinManagedBean.contentPortletSkin.strongTextStyle}">
          <l:htmlSkinnedImage id="SaveImage" style="border:0;" url="save.gif" alt="Save Information"/>
</h:commandLink>When I click on the generated link, I get this. And this is happening for all the h:commandLink in the application.
http://localhost:9080/registration/updateProfile2.jsf[request.getQueryString()=null][request.getRequestedSessionId()=F1CCE237DD81D301F1C4DBA6910FFD8A][request.isRequestedSessionIdFromCookie()=true][request.isRequestedSessionIdFromURL()=false][request.isRequestedSessionIdValid()=true]Parameters:[rolePracticeAreasForm:title=rolePracticeAreasForm:primaryPracticeArea=10002javax.faces.ViewState=-2943345291093118815:-4400303399130292206rolePracticeAreasForm:practiceAreasMod2=10148.1rolePracticeAreasForm:practiceAreasMod1=10002.1rolePracticeAreasForm:Save=rolePracticeAreasForm:SaverolePracticeAreasForm=rolePracticeAreasFormrolePracticeAreasForm:otherField=rolePracticeAreasForm:fromMyAccount=1]||
javax.servlet.ServletException: Index: 0, Size: 0
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:325)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.legaledcenter.util.urlrewrite.UrlRewriteFilter.doFilter(UrlRewriteFilter.java:250)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.springframework.orm.hibernate3.support.OpenSessionInViewFilter.doFilterInternal(OpenSessionInViewFilter.java:198)
     at org.springframework.web.filter.OncePerRequestFilter.doFilter(OncePerRequestFilter.java:75)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at com.jscape.framework.galileo.support.upload.UploadFilter.doFilter(UploadFilter.java:71)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:293)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:849)
     at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
     at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:454)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.IndexOutOfBoundsException: Index: 0, Size: 0
     at java.util.ArrayList.RangeCheck(ArrayList.java:547)
     at java.util.ArrayList.get(ArrayList.java:322)
     at javax.faces.component.AttachedObjectListHolder.restoreState(AttachedObjectListHolder.java:161)
     at javax.faces.component.UIComponentBase.restoreState(UIComponentBase.java:1427)
     at com.sun.faces.application.view.StateHolderSaver.restore(StateHolderSaver.java:121)
     at com.sun.faces.application.view.StateManagementStrategyImpl$4.invokeContextCallback(StateManagementStrategyImpl.java:289)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1253)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at javax.faces.component.UIComponent.invokeOnComponent(UIComponent.java:1262)
     at javax.faces.component.UIComponentBase.invokeOnComponent(UIComponentBase.java:672)
     at com.sun.faces.application.view.StateManagementStrategyImpl.restoreView(StateManagementStrategyImpl.java:284)
     at com.sun.faces.application.StateManagerImpl.restoreView(StateManagerImpl.java:177)
     at com.sun.faces.application.view.ViewHandlingStrategy.restoreView(ViewHandlingStrategy.java:119)
     at com.sun.faces.application.view.FaceletViewHandlingStrategy.restoreView(FaceletViewHandlingStrategy.java:434)
     at com.sun.faces.application.view.MultiViewHandler.restoreView(MultiViewHandler.java:143)
     at com.sun.faces.lifecycle.RestoreViewPhase.execute(RestoreViewPhase.java:199)
     at com.sun.faces.lifecycle.Phase.doPhase(Phase.java:101)
     at com.sun.faces.lifecycle.RestoreViewPhase.doPhase(RestoreViewPhase.java:110)
     at com.sun.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:118)
     at javax.faces.webapp.FacesServlet.service(FacesServlet.java:312)
     ... 22 more
********** Message End *************Thanks

Overflow when converting from "3.60001e+11"

Hi Guys,
I'm Working with my PO using MIRO, I don't know why the error occurs. I've used the SAP Version 620 but end up with an error, then used Version 710 and successfuly created the transaction, but I'm stacked with version 620. I'm not allowed to transact it using the Version 710 that's why im looking for a patch or upgrade within 620 that i can use so that it can be solve.
I'm in need of your help guys. I know there someone out there that can help me.
THE ERROR
Runtime Errors         CONVT_OVERFLOW
Exception              CX_SY_CONVERSION_OVERFLOW
       Occurred on     03/28/2011 at 01:00:47
Overflow when converting from "3.60001e+11"
What happened?
Error in ABAP application program.
The current ABAP program "SAPLEINS" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_CONVERSION_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"DISTRIBUTE_ACC_ASSIGN_RE" "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
When attempting to convert the value "3.60001e+11",
an overflow occurred.
How to correct the error
The exception must either be prevented, caught within the procedure
"DISTRIBUTE_ACC_ASSIGN_RE"
"(FORM)", or declared in the procedure's RAISING clause.
To prevent the exception, note the following:
If the error occurred in one of your own programs or in an SAP program
that you modified, try to correct it yourself.
You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:

I won't post here if i already got the answer in SAP notes. I've spent 3 days searching for the answer. The only answer i got is the upgrade but can't be consider. OSS notes didn't provide me any answer. Hope u can help me
Edited by: docgon on Mar 30, 2011 2:38 AM

Upload maxdb really needed? - Overflow when converting from 32768

hello,
I am facing with a run time error that does not make sense when uploading maxdb database. The error is: "Overflow when converting from 32768".
I am following this configuration tutorial:
http://help.sap.com/saphelp_nwmobile71/helpdata/en/45/17a790d8000064e10000000a1553f7/frameset.htm
Anyway, is there a need to upload this database? We installed netweaver mobile with SQL server database.
Help please.
Thanks.
Edited by: João Carneiro on Feb 8, 2011 2:10 PM

Hi,
Uploading MAXDB is not mandatory. It is needed only when multiple devices need to be installed with MAXDB through setup or software packages, which helps administrator to roll out multiple devices, so that end users will get all the necessary software to install the device.
Hope this clarifies your query.
Thanks and Regards,
Suma

Grainy Image when converting from PAL to NTSC...

Hi,
I'm using Compressor 2.0.1 to convert a PAL movie to NTSC. I find that the output is extremely Grainy, the blacs are Muddy and the Highlights are colored.
Any suggestions?
Thanks and Regards,
Rajnesh

There are many options when converting from PAL to NTSC with Compressor's Frame Controls panel. Have you tried other settings? Note, however, that the highest quality settings are pretty slow so be prepared for a fairly long wait even on your Power Mac G5.
Otherwise, you might want to try the freeware utility JES Deinterlacer (available on VersionTracker.com). JES Deinterlacer is pretty fast at PAL <-> NTSC conversion and the results are better than you will get with the basic settings in Compressor 2.

How can I keep the formatting when converting from Word to pages?

How can I keep the formatting when converting from Word to pages?

Use only formatting that is supported (in the same manner) in both applications. You'll need to find which that is through trial and error. Beyond those formatting options, you'll need to do some corrections, as Fruhulda suggests.
Regards,
Barry

Bug when converting from text to date

Similar Messages

Maybe you are looking for