Bug when restoring from Migration manager?

hi
I got a new mac today. I did a fresh install and chose to do a restore from time machine, which I had previously used to backup my old laptop. When time machine finished I found my old user account in the login window. However my password doesn't work at all. Also tried reseting the password using the leopard installation DVD but it keeps rejecting my password.
Any ideas on how to solve this?

SYS @ DAWA> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SYS @ DAWA> startup mount
ORACLE instance started.
Total System Global Area 1048576000 bytes
Fixed Size                   792200 bytes
Variable Size             551807352 bytes
Database Buffers          494927872 bytes
Redo Buffers                1048576 bytes
Database mounted.
SYS @ DAWA> recover database using backup controlfile until cancel;
ORA-00279: change 329012 generated at 03/08/2005 16:24:46 needed for thread 1
ORA-00289: suggestion :
X:\ORACLE\ORADATA\FLASH_REC\DAWA\ARCHIVELOG\2011_08_18\O1_MF_1_6_%U_.ARC
ORA-00280: change 329012 for thread 1 is in sequence #6
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'X:\ORACLE\ORADATA\FLASH_REC\DAWA\ARCHIVELOG\2011_08_18\O1_MF_1_6_%U_.ARC'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'X:\ORACLE\ORADATA\DAWA\SYSTEM01.DBF'You can download the alert log from here:
http://ahmedbaraka.com/temp/alertdawa.log

Similar Messages

Why wont camera roll from iphone show up on ipad when restored from iphone?

Why wont camera roll from iphone show up on ipad when restored from iphone? I purchased the ipad and when I went to set it up I chose restore from iPhone. All the apps transferred and the photos in the stream but not the camera roll. When I restored a new iPhone the camera roll transferred.
is there a way to get camera roll on ipad?
Thanks

Camera Roll photos from an iPhone backup will not be transferred to an iPad. iPhone to iPhone will transfer the Camera Roll, but iPhone to iPad, or iPad to iPhone will not transfer the Camera Roll.
Cheers,
GB

[svn:cairngorm3:] 17872: Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup .

Revision: 17872
Revision: 17872
Author:   [email protected]
Date:     2010-09-27 08:04:40 -0700 (Mon, 27 Sep 2010)
Log Message:
Popup: Exposed set accessor of open for view state usage and fixed bug when closing from model within popup. http://www.spicefactory.org/forum/viewtopic.php?p=3932. Added new sample to show model and view state interactions.
Modified Paths:
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpBase.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpFactory.as
    cairngorm3/trunk/libraries/Popup/src/com/adobe/cairngorm/popup/PopUpWrapper.as
    cairngorm3/trunk/libraries/PopupTest/.actionScriptProperties
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopup.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/PopUpPM.as
Added Paths:
    cairngorm3/trunk/libraries/PopupTest/src/PopUpModelExample.mxml
    cairngorm3/trunk/libraries/PopupTest/src/samples/MyPopupWithModel.mxml

Lots to be excited about. BUT...Just updated to 8.1 on one of my computers to test it out...
Sadly, the following issue is NOT fixed for me. Is it with new projects only? I haven't started a new project on 8.1 I've only opened an old project but the issue that I'm referring to which involves also a delay/freeze of anywhere from a few seconds to a MINUTE while the render bar goes from yellow to red and then back to yellow is still there. Boo.
On the list above...
Switching between sequences can turn the render bar red.
This issue is incredibly easy to replicate. I really do hope it gets fixed. Here are the steps:
1) Create two sequences with multiple short clips (the more clips the better)
2) Make sure GPU acceleration is enabled.
3) Add warp stabilizer to the clips in both sequences. Again, the more clips the longer the delay/freeze will be as the render bar goes from YELLOW to RED and then eventually back to YELLOW again.
4) Hit SAVE.
5) Now, toggle between sequences. You'll hit a short delay with a few clips stabilized and a LONG delay with lots stabilized. In my case this delay is around a full minute. The render bar will go from YELLOW to RED and then back to yellow...eventually.
6) Toggle back to the original sequence and the delay occurs again.
7) Once you've toggled between sequences and have gone through this delay, that's it, there is no longer a delay...UNTIL...(and here's the big kicker)...until the project is SAVED again. After that the issue returns when you toggle between sequences. Both saving manually and AUTOSAVING cause this issue. No way around it except not editing with GPU acceleration.
Not sure what the issue is...caching issue when saving maybe? Either way, it stinks and it's still there in 8.1. Big bummer.
Again, lots to be excited about with this release but I really was hopefully this specific issue was resolved.
Sigh.

Too many bugs to isolate a bug when swithching from Alt-F1 to Alt-F7

First, I consider Linux to be the less buggy OS out there.
Well, Windows would be less buggy, but it does not really exist, since you have to pay to use it.
Still, I use to consider Linux very buggy. This opinion I hold true more than ever.
Here is my box:
A P5GZ-MX motherboard (intel 945GZ), with 1 GB Memory, and an Celeron D @ 2.66 GHz.
Now, the integrated VGA connector is badly soldered, so that I used to put something to hold the cable up to have an image.
This is not the monitor Cable that is broken (I tried an other one and had the same problem).
When this was not enough anymore, I put my box upside-down (reversing side of DVD and HD too), that way gravity would hold the cable up (eh... down).
When this was not enough anymore, I put an old Radeon 7200 (an R100 generation ATI PCI card).
Then, my problems began (eh... I means continue as usual).
Let's begin the story with when I installed Arch Linux (again, well the first time with the Radeon 7200 card), about three weeks ago.
Well, I set the BIOS to prefer the PCI card, to internal one, for what should be now obvious reason.
I installed Xorg... and things were not so bad. Except, one in about 3 times, when switching back from (Ctrl-Alt-F1 console) to (Alt-F7 Xorg).
I would have THE bug. Well, basically, one or many window would be empty. Mouse would move, but not interact with anything on screen. Sometimes mouse is jailed inside a window (cannot move out of a window). Recently (maybe just because Firefox not occupying full screen), I would see that some of the text from (Ctrl-Alt-F1 text console) would appears (very brokenly) under the windows (about 4 times on the screen, in green on black).
I still can swith to text mode with Ctrl-Alt-F1 after bug, and then can use the console.
Nothing interesting would show in Xorg.0.log after the bug happened.
I thought maybe I should try a different window manager. I tried icewm rather than OpenBox (or twm).
At first, I thought OpenBox was the bug, because icewn seems not exhibit THE bug.
But then, I came to the conclusion, that icewm just had made the bug happen one in about twenty (rathen than in three).
So I thought that I should install fbcon and vesa driver too (there were some warning they were not installed).
No change.
Then I thought, maybe I should try with the vesa driver rather than the radeon one.
Surprise:
(EE) VESA(0): V_BIOS address 0x3d810 out of range
(EE) screen found, but none have a usable configuration
Then I thought, I should try with latest kernel. Downloaded it.
Still the bug... with 3.1.1-1-Arch (32 bits BTW).
Ok, so let's stick with radeon. Reading on possible Kernel Mode Setting with Radeon, I created /etc/modprobe.d/radeon.conf with:
options radeon modeset=1
Well, just restarting with startx, show in Xorg.0.log, that KMS was still active.
So, I thought, let's reboot and see.
But I did not see.
Well, my GRUB menu, have NO vga= on the kernel line. So that I boot in plain text (as far as I know).
At first, Linux seems to boot fine, but then not much before when login prompt would appears... screen became totally black.
I realized I was still able to log in without seeing what I do, and 'reboot'.
Ok, try the fallback... not working either.
So basically, my computer still was working, except I would not see anything.
Then I began to think... well, maybe I could try to connect the monitor in the 'badly soldered' internal VGA connector.
Surprise, surprise: the login prompt! Ouf!
Well, strangely I now need to hold the cable up, so that I thought: maybe this is time to put my box down side up (remember, it is already up side down). But, was too lazy for it. I just edited back /etc/modprobe.d/radeon.conf with modese=0, put back the monitor in the Radeon 7200 card, and rebooted.
Things were 'fine' again.
That's when, I thought I should write a message for maybe asking help, but frankly more to publicly complain.

Revised hypothesis:
I now believe that the bug while switching from console back to Xorg is not hardware related, and should probably happens to anyone. Also I have a new procedure that seems to always trigger it:
1) on console (Ctrl-Alt-F1) run startx (without ending & )
2) You should be in Xorg, go back to console with Ctrl-Alt-F1
3) type Enter
4) Type Alt-F7 to go back in Xorg... hopefully for me in bogus state
Now, the message that seems to be written in some titlebars are the same, I think, that I would get when I go back to console and do: Ctrl-C (2 or three times)... then after the bug I would see some:
xterm: Ressource temporarily not available (or something very similar)
About V_BIOS address 0x3d810 out of range I am now convinced it is while loading (initializing) int10 module,
The sad part is that if I add Option "NoInt10" "True" to vesa driver section (doc seems to wrongly suggest to put it in Server section)... then yes, the out of range does not appears, but vesa will continue to unload itself... and finally no usable screen found message would continue to appears. So I suppose Int10 module have become mandatory to vesa rather than optional.

ORA-01152 when restoring from RMAN backupset in NOARCHIVELOG mode

Hi all,
I got the error ORA-01152 when I tried restoring an Oracle 10g R1 database from an RMAN backupset into a new server. The error returned when it reached to the level of opening the database in resetlogs.
The database runs on NOARCHIVELOG mode and on Windows 2003 Server SP2 32-bit.
Following is what I did in RMAN:
set ORACLE_HOME=D:\oracle\product\10.1.0\db_1
set ORACLE_SID=DAWA
set PATH=D:\oracle\product\10.1.0\db_1\bin;%PATH%
cd %ORACLE_HOME%\bin
rman target sys/mypassword
Recovery Manager: Release 10.2.0.1.0 - Production on Tue Feb 13 00:36:55 2007
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to target database (not started)
RMAN> startup nomount pfile=X:\temp\DawaPFILE.ORA
connected to target database (not started)
Oracle instance started
Total System Global Area 1048576000 bytes
Fixed Size 792200 bytes
Variable Size 551807352 bytes
Database Buffers 494927872 bytes
Redo Buffers 1048576 bytes
RMAN> restore controlfile from
'X:\temp\Flash_Rec\DAWA\AUTOBACKUP\2011_07_16\O1_
MF_S_756655133_7226R018_.BKP';
Starting restore at 19-JUL-11
allocated channel: ORA_DISK_1
channel ORA_DISK_1: sid=270 devtype=DISK
channel ORA_DISK_1: restoring controlfile
channel ORA_DISK_1: restore complete
output filename=D:\ORACLE\ORADATA\DAWA\CONTROL01.CTL
output filename=D:\ORACLE\ORADATA\DAWA\CONTROL02.CTL
output filename=D:\ORACLE\ORADATA\DAWA\CONTROL03.CTL
Finished restore at 17-AUG-11
alter database mount;
database mounted
catalog backuppiece 'X:\temp\PUMHJATD_1_1';
catalog backuppiece 'X:\temp\PTMHJ91Q_1_1';
/* Rename the Redologfiles,so that they can be created in new locations
the database is opened in resetlogs */
SQL>conn sys as sysdba
-- get registered files from SELECT * FROM V$LOGFILE
SQL> alter database rename file
'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO01.LOG' to
'X:\oracle\oradata\dawa\REDO01.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO02.LOG'
to 'X:\oracle\oradata\dawa\REDO02.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO03.LOG'
to 'X:\oracle\oradata\dawa\REDO03.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO04.LOG'
to 'X:\oracle\oradata\dawa\REDO04.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO05.LOG'
to 'X:\oracle\oradata\dawa\REDO05.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO06.LOG'
to 'X:\oracle\oradata\dawa\REDO06.LOG';
alter database rename file 'D:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\REDO07.LOG'
to 'X:\oracle\oradata\dawa\REDO07.LOG';
/* Now in RMAN: restore the datafiles
    to new locations and recover. */
RMAN> run{
set newname for datafile
'E:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\UNDOTBS201' TO
'D:\oracle\oradata\dawa\UNDOTBS201';
set newname for datafile
'E:\ORACLE\PRODUCT\10.1.0\ORADATA\DAWA\UNDOTBS202' TO
'D:\oracle\oradata\dawa\UNDOTBS202';
restore database;
switch datafile all;
alter database open resetlogs;
.../* alter database open resetlogs returned the errors: */
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of alter db command at 08/18/2011 08:44:45
ORA-01152: file 2 was not restored from a sufficiently old backup
ORA-01110: data file 2: 'D:\ORACLE\ORADATA\DAWA\UNDOTBS206'Thanks in advance.

SYS @ DAWA> shutdown immediate
ORA-01109: database not open
Database dismounted.
ORACLE instance shut down.
SYS @ DAWA> startup mount
ORACLE instance started.
Total System Global Area 1048576000 bytes
Fixed Size                   792200 bytes
Variable Size             551807352 bytes
Database Buffers          494927872 bytes
Redo Buffers                1048576 bytes
Database mounted.
SYS @ DAWA> recover database using backup controlfile until cancel;
ORA-00279: change 329012 generated at 03/08/2005 16:24:46 needed for thread 1
ORA-00289: suggestion :
X:\ORACLE\ORADATA\FLASH_REC\DAWA\ARCHIVELOG\2011_08_18\O1_MF_1_6_%U_.ARC
ORA-00280: change 329012 for thread 1 is in sequence #6
Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
ORA-00308: cannot open archived log
'X:\ORACLE\ORADATA\FLASH_REC\DAWA\ARCHIVELOG\2011_08_18\O1_MF_1_6_%U_.ARC'
ORA-27041: unable to open file
OSD-04002: unable to open file
O/S-Error: (OS 2) The system cannot find the file specified.
ORA-01547: warning: RECOVER succeeded but OPEN RESETLOGS would get error below
ORA-01152: file 1 was not restored from a sufficiently old backup
ORA-01110: data file 1: 'X:\ORACLE\ORADATA\DAWA\SYSTEM01.DBF'You can download the alert log from here:
http://ahmedbaraka.com/temp/alertdawa.log

Azure VM name when restoring from Backup Vault

I've been experimenting with restoring Azure VMs using Backup Vault and works great. This will solve DR needs VERY easily so thank you!
One weird issue (bug?) is that when I try to restore from a recovery point and enter a VM name, I get "Specified name is already in use" for names that don't exist at all within my account. This causes a slight issue since even though I can
rename the VM name within the RDP session, the name listed within the Azure Portal doesn't seem to change which could become an administrative nightmare down the road. Is this a bug? Is there a way to rename the name that appears in the Azure Portal?
Thanks.
-Ben

Hi Manu,
I tried logging out and in of both portals but don't see the updated name (I renamed the VM an hour or two ago). Just so I'm clear, the host name does reflect the renamed VM name. However, the name listed in the various lists within the portal is not
updated.
In the screen shot below, the restored VM name was "WEB2-Restore". I then renamed the VM from with a RDP session to "WEB1". The "Host name" is listed correctly on this page but not the name in the label or heading:
-Ben

New photos/videos gone when restored from backup. Why?

Just got the iPhone 5 over the weekend, which was a huge upgrade from my 2009 3G!
I didn't get around to plugging the phone into my MacBook Pro until today. When I synced my new iPhone, I clicked "restore from previous backup", which then it put all my old photos from 3G onto iPhone 5.
However, when this happened, all of my SMS and photos/videos that I took over the weekend are now gone. I presume the iphone replaced the new photos with my old ones?
Is there any way I can get those videos and photos back? Please let me know!
Thanks

When you restore from the backup you only get the data that was contained in that backup. You will lose any data on the device that occurred after the backup point.
Restore = Replace data on device.
It does not "add" that data to the existing data on the phone.

Lost recent info when restored from backup

When I connected my phone, it automatically asked me if I wanted to restore from a previous backup. Without thinking, I clicked ok, and lost all my recent info - contacts, TM's, and songs, etc. Is there a way to get it back?
I've undone restoring my phone before, and it has worked, but I don't think I ever backed up my recent phone before it wrote over it with the old backup.

To my knowledge, now that you have "restored" your phone using a previous backup, that's what you've got, if you didn't create a backup of your device prior to re-syncing. You should still be able to push your contacts from your email provider to update but any entered manually are probably gone.

Unknown Apple ID Password requests when Restoring from iCloud

Hi peeps
Background info:
iPhone 5 64GB unlocked, iOS 8.2, purchased from iStore new two years ago (not some craigslist special)
Has two Apple ID's used on it - my current one from my own country and an old one from when I lived in another country. No other Apple ID's have been used for any purchases on this iPhone ever.
Problem:
I decided to erase my iPhone 5 this morning to try and help with the sluggishness that has been plaguing it after 2 years of hard use. Everything went well and setup seemed normal. Then it got weird...
I am at the point in setup where I've now setup WiFi, entered my Apple ID details and accepted T's & C's, but I'm getting asked to "Enter the Apple ID password for tiffany*****@gmail.com to use for store purchases". This is one of 3 completely unfamiliar Apple ID's that I'm requested to provide the passwords for(plus one is a .ru email address, which makes me even more concerned). What I need to know is
Should I be concerned re my iPhone and Apple ID's security possibly having been breached?
Should I be worried about restoring from a (possibly) hacked iCloud backup and setup as a new iPhone instead?
Is this a common issue? Do other people find their phones requesting the wrong Apple ID password?
I'm opting to "Skip this step" on those accounts for now, but I'm feeling a bit concerned about the whole thing.
Any ideas/solutions would be appreciated!
Thanks
Steve

Ingo2711 wrote:
Did you use apps bought with different Apple IDs on your phone?
As I stated in my original post "Has two Apple ID's used on it... No other Apple ID's have been used for any purchases on this iPhone ever."
The problem is that the three additional Apple ID's I'm asked to provide passwords for are Apple ID's I have never seen before.
No one else has ever used my phone and all apps are downloaded through the App Store on my two ID's. To my knowledge, I've never done anything odd to create a security risk on this phone. I have never been asked to provide unknown Apple ID details on this phone before today.

Error code: 16 when restoring from backup file

I've just restored my macbook pro and tried to restore from backup Photoshop file, now I get the code Error: 16. Does anyone know how to fix this problem? Thank you!
Roferr

Open the Terminal.app
Copy and paste: sudo chmod -R 777 /Library/Application\ Support/Adobe
Press Enter and supply your password if asked.
If that does not work, do a reinstall from the discs or installer.
Migrating Adobe programs from another Mac or restoring from Time Machine breaks the licensing.
Gene

Grey Screen when restoring from Time Machine Backup

I was having some issues with my Macbook (circa 2008, aluminum) so I thought restoring from a Time Machine backup might solve the problem. The restore goes fine, always, but unfortunately, now whenever I start it up, it goes straight to the Gray Screen and goes no further. When checking the error logs, I see somewhere around 60% (I'm guessing, based on the time) the error:
bookmark failed to issue extension for item /com.apple.recovery.boot/BaseSystem.dmg
And a few other errors. Is there something I should be doing to fix this? Someone recommended reinstalling Lion, but as I have no wireless internet at home (only a plug-in USB 3G thing) it can't verify the installation.

Make a "Genius" appointment at an Apple Store.

When restoring from backup does anyone have an issue with old apps reappearing and initializing?

After upgrading to iTunes v11 none of my devices were recognized. When I restored from a backup I had apps from 2 years ago that installed and initialized

I see no one has responded, I have the same problem as well except the album art shows when my ipod is connected to itunes, but doesn't show when playing the ipod alone.

Why does iTunes always sync old apps back to my phone when restoring from back-up?

I can't seem to stop this happening - I delete apps frequently from my phone as I find I have no use for them. I regularly sync my phone to iTunes and I expected this to mean that old apps would be deleted from there as well, the same as contacts and photos are modified. But whenever I've restored from a back-up, I end up with all my old apps back on. I'm currently restoring from a back-up and it's syncing 1560 apps back onto my phone! I only had 346 on there that I wanted! But obviously I do want it to sync apps back on because I really can't be bothered to download 346 apps again, but why can't it just sync the apps back on that were present on my most recent back-up? This seems to be one of the many dumb things that iTunes does...

Syncing apps is a transfer/copy process, not a true sync process as with contacts, and the same for all iTunes content.
All apps on your iPhone should be in your iTunes library. If you have Sync Apps selected under the Apps tab for your iPhone sync preferences with iTunes, after downloading an app direct with your iPhone the app will be copied to your iTunes library automatically along with being selected the first time you sync your iPhone with iTunes after doing so. If you delete an app direct on your iPhone, the app should be deselected automatically under the Apps tab for your iPhone sync preferences with iTunes the first time you sync your iPhone with iTunes after doing so - so the app won't be reinstalled on your iPhone with a following sync with iTunes. Your selections under the various tabs for your iPhone sync preferences with iTunes is included with your iPhone's backup.
No iTunes content in your iTunes library will ever be erased via the iTunes sync process.

How do I create a recovery partition when restoring from Time Machine?

I am planning to replace the HDD in my Macbook Pro with an SSD. I've used Time Machine to backup my HDD (running Mountain Lion) but am trying to find the best way to restore my Time Machine backup to the new SSD once installed.
Given that the new SSD will not have a bootable OS X Recovery partition, I have created a bootable OS X Recovery drive on a USB thumb drive using OS X Recovery Assistant.
In order to ensure that the new SSD has the OS X Recovery parition, should I:
(1) reinstall Mountain Lion on the SSD then recover my data from Time Machine; or
(2) can I simply use the Restore from Time Machine option in OS X Recovery to do it all at once.
I can't seem to work out whether option (2) will create the OS X Recovery partition on the new SSD or just recover the system partition.

Turns out the OS X Recovery partition is only created on a fresh install of OS X. Restoring via Time Machine will not do the trick.

Itunes locks at same spot when restoring from backup disk

Restoring from itunes library a movie, but halfway thru it locks up, tried making more hard drive space, rebooting, but each time it locks at the same spot while trying to restore this movie. The Disk is not scratched and was just made last night, other items on disk have been restored to library.
Movie was backed up from mac library and trying to restore it to windows itunes library (same itunes account), and successfully did this with another movie on same disk.
This movie is 2 1/2 hours, the first was 90 minutes.
?suggestions

Getting the same problem here..
“The iPhone “iPhone” could not be restored. An unknown error occurred (-1).”
I have not jailbroken the iPhone, i only have dozen or so apps, synced it every other day. tried the DUF mode before connecting it to the pc.
also, i tried downgrading back and restoring with the following ipsw packages: IOS 4.3.2, 4.3.4, 4.3.5 and 5.
different error code appears with each ipsw. that didn't work either!
in the last attampt it got through the whole progress bar (so it might now be a problem with the firmware), but then it err and gave me the same massage.
I thought those things only happens to Blackberry

Bug when restoring from Migration manager?

Similar Messages

Maybe you are looking for