Bug while editing and compiling the procedure

Bug while editing and compiling the procedure in Sql Developer 1.5.4
the error is
ora -00904 "ATTRIBUTE" Invalid Identifier
Edited by: user4448643 on Mar 16, 2009 5:09 AM

I'm not trying to be snippy but this is the answer I got from you in another thread about the same issue:
+"I'm not sure I said it's being worked on - the bug is logged and in the queue.+
+Support will tell you to move to a supported version of the database, this is true. The same is true for the forum, if you are on an unsupported database version you're encouraged to move to a supported release.+
+If you need to work with 9i, then use SQL Developer 1.5.3, the error is not in that release."+
When I read that I got that I should not assume the bug was being worked on and that the SQL Developer team sees 9i as having a short remaining life.
JB

Similar Messages

How to open, edit and compile the order import program.

Order import program deletes the so_header_interface_all and so_lines_interface_all tables after importing, I want to avoid deleting the interface tables.
Please ket me know in detail how to comment the delete statement in the order import program.
I want to know how to open, edit and compile the order import program.
Thanks,
Previn

While you can access the OLE objects in C#.NET, the JSObject was designed as a bridge to VB.NET. Since the real power of what you can do with Acrobat automation comes from the JSObject, it would be very difficult to do that you want from C#.NET - or you would at least be limited in what you can do beyond basic functionality.
Also, a full version of Adobe Acrobat Standard or Professional would need to be installed on each client system. Reader will not work for what you want to do. Each end user running your application will require an installation of Acrobat.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.

I have instaled Windows 7 64bit Enterprise edition and installed the lastest version of Firefox and it freezes every time i launch it. Please help me.
4d4aae27-34ee-4620-b349-c03002813b2003-Jan-1312:30 AM
54e24e0e-dfc4-466b-a347-4bd95536773e03-Jan-1312:30 AM
22d351d2-6461-4f33-9fbd-6d31f769e73103-Jan-1312:30 AM
8a8da99b-335e-43bb-aa12-4634aa0b431003-Jan-1312:30 AM
a15bb095-aeb9-44e1-a79c-1a17cee207d503-Jan-1312:28 AM

None if these crash reports seem to have been send.
Do you have crash reports with a "bp-" prefix that were submitted and that show a crashing thread?
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
You can use one of these to start Firefox in <u>Safe mode</u>:
*On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
*On Mac, hold down the Options key while starting Firefox
See also:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes

Assertion_Failed shortdump while activating and checking the transformation

Hi All,
I am getting shortdump while actiavting and check the transformation. Even i am not able to go in Edit mode of the transformation.
I am getting short dump (errior message - Assertion_Failed with Termination occurred in the ABAP program "CL_RSTRAN_GUI_GROUPID==
in "ADD_RULES_TO_GUIRULES".
The main program was "RSAWBN_START ".
In the source code you have the termination point in line 44
of the (Include) program "CL_RSTRAN_GUI_GROUPID=========CM003".),
We are on BI 7.0 with SP 13. I did the process stated in the OSS 998730. But still I am gettin g the same short dump.
Please advise me on this issue.
Regards
MRK

Hi,
Added new 4 infoobject in cube and written code in End routine. Check went well. But on activation of transformation for first time system given short dump as mentioned in mail.
From that onwards even i am not able to go in EDIT mode of that transformation.
When i am checking that transformation it giving the Message_type _x shortdump.
When i am trying to go in edit mode it giving Assertion_failed.
I am not sure what went wrong with that transformation.
Regards
MRK

While Deploying and running the application

Dear all,
While deploying and running the application, after importing the relevant files into my local amchine workspace from another machine, i am facinf exception/error message as below:
'Service call exception; nested exception is: com.sap.engine.services.webservices.jaxrpc.exceptions.InvalidResponseCodeException: Invalid Response Code: (404) Not Found'.
Would someone suggest for the same.
With Regards,
Lux.

Hi,
This is the message i am receving during runtime
Web Dynpro client:
HTML Client
Web Dynpro client capabilities:
User agent: Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; .NET CLR 1.0.3705; .NET CLR 1.1.4322), version: null, DOM version: null, client type: msie6, client type profile: ie6, ActiveX: enabled, Cookies: enabled, Frames: enabled, Java applets: enabled, JavaScript: enabled, Tables: enabled, VB Script: enabled
Web Dynpro runtime:
Vendor: SAP, Build ID: 6.4013.00.0000.20050607163945.0000 (release=630_SP_REL, buildtime=2005-06-07:21:12:54[UTC], changelist=351986, host=PWDFM067)
Web Dynpro code generators of DC local/SurveysOverview:
SapDictionaryGenerationCore: 6.4013.00.0000.20050606171348.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:02:28[UTC], changelist=351717, host=PWDFM026.wdf.sap.corp)
SapMetamodelWebDynpro: 6.4013.00.0000.20050609113138.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:05:41[UTC], changelist=352442, host=PWDFM026.wdf.sap.corp)
SapMetamodelCore: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:40[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapWebDynproGenerationCTemplates: 6.4013.00.0000.20050628104636.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:21:22[UTC], changelist=356134, host=PWDFM026)
SapGenerationFrameworkCore: 6.4013.00.0000.20041104141254.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:55:55[UTC], changelist=298452, host=PWDFM026.wdf.sap.corp)
SapIdeWebDynproCheckLayer: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:17[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapMetamodelDictionary: 6.4013.00.0000.20050606171352.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:59:56[UTC], changelist=351719, host=PWDFM026.wdf.sap.corp)
SapMetamodelCommon: 6.4013.00.0000.20050606171700.0000 (release=630_VAL_REL, buildtime=2005-07-18:19:56:48[UTC], changelist=351724, host=PWDFM026.wdf.sap.corp)
SapWebDynproGenerationCore: 6.4013.00.0000.20050606172055.0000 (release=630_VAL_REL, buildtime=2005-07-18:20:09:46[UTC], changelist=351729, host=PWDFM026.wdf.sap.corp)
SapDictionaryGenerationTemplates: (unknown)
Web Dynpro code generators of DC sap.com/tcwddispwda:
No information available
Web Dynpro code generators of DC sap.com/tcwdcorecomp:
No information available
J2EE Engine:
No information available
Java VM:
Java HotSpot(TM) Server VM, version: 1.4.2_08-b03, vendor: Sun Microsystems Inc.
Operating system:
Windows XP, version: 5.1, architecture: x86
Error stacktrace:
java.lang.NullPointerException
at com.sap.survey.NewSurveyView.onActionCreateSurvey(NewSurveyView.java:180)
at com.sap.survey.wdp.InternalNewSurveyView.wdInvokeEventHandler(InternalNewSurveyView.java:198)

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With sever

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?

I am a novice. I just bought a nikon d5200 and would like to know which Photoshop would serve me well at this juncture. I do not plan on becoming a professional, but would like to be able to edit and enhance the photographs that I will take. With several Photoshop programs on the market please advise me as to which I should purchase for the purposes I described ?

Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.

Some Kind of huge Noise coming from the Disc Drive while inserting and ejecting the disc.
i have just purchased it before a couple of days a go.

I just installed a Mac Pro for a client. After a while I noticed this buzzing everyones talking about. It was especially bad after I installed two more internal drives. It seemed to come and go with HD activity. I pulled up the lever on the back of the machine when it was particularly loud and the buzzing went away. So like some others have noticed it's associated with the HD bays. I took the side off and adjusted the seating of the drives so they were exactly centered Now the buzzing is gone. I'll keep an eye on it. Maybe it will need some kind of silicone bumpers where the bay trays are metal to metal.
More research to come.
Richard

HT201272 I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

I purchased a film a while back and have the invoice to prove it and its shown on my purchased list however I went to put it on my phone and its not showing the iCloud icon to download it even though I already bought it.any ideas?

If you downloaded it on your computer's iTunes then it should be in the Books part of your library, if you downloaded it on an iOS device then it should be in the Music app on it. If it's not there, and you don't have a copy of it on your backup of your library, then you will need to try contacting iTunes Support and see if they will grant you a re-download (audiobooks are currently a one-time only download from the store, which I believe is a requirement from audible.com who supply them) : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

Should I use an external hard drive to store the files while editing and how should I do this?

Getting used to FCPX and want help learning how to store my Canon D60 Video files on either my internal Mac book pro or on an external hard drive while editing projects?   Do the files need to be transcoded on the computer drive or can that happen on an external HD?
Thanks,
Greg

Well, in my opinion, it all comes down to speed. There are a lot of editors that swear that working with footage on your system drive will do all sorts of horrible things, cause crashes, etc. Really its a bunch a malarkey. The most it will do is slow you down when your system needs access to the drive. Bandwidth is bandwidth is bandwidth - its all the same. If working with video on your system drive caused crashes, so would doing thousands of other things and we would all have dumped apple long ago for Microsoft or linux.
Here's what I tend to get for sustained read speed on various drives (ie reading a few large files like video files):
USB 2.0: 25 - 30 MB/sec. Drive RPM doesn't matter much since USB is limiting factor, unless you're running a system.
Firewire 400: 28 - 34 MB/sec. Drive RPM doesn't matter much since FW is limiting factor
Firewire 800: 55 - 60 MB/sec. Drive RPM doesn't matter much since FW is limiting factor
internal drive on SATA II or III connection, or USB 3.0 external drive:
    7200 RPM: ~100 MB/sec
    5400 RPM (most laptop drives): probably ~70-80 MB/sec
SSD: 250-500 MB/sec if installed internally or over USB 3. USB 2 or firewire connection for an SSD is a waste of SSD speed *except* that they have fantasticly fast random access for reading many small files, so I got a really fast launching system in an experiment installing a system on an SSD and connecting it via FW 800 - but that's not relevant here
so - to make a short story long - do whatever works for you. avoid using USB 2.0 or firewire 400 drives if you're editing HD - you can't play transcoded ProRes 1080p footage from them reliably. And once you have more than one clip overlapping, like at cross dissolves, you're sunk. You're internal drive is likely much faster, even with the overhead of the system using it too.
Blackmagic Disk Speed Test on the app store is a good HD speed tester. Ignore all the video specific stuff at the bottom - its mostly for uncompressed video, which I doubt you're working with.
Since i have a recent macbook pro (late 2011) and my edits are usually not more dense than 3 layers of video at a time (mostly concert video rather than narrative film), I actually almost never transcode, or even render - and this is for 1080p HD video - because FCP X is so good at playing the imported original h.264 files. I store my media I'm working with on my internal laptop drive (which i upgraded to a 7200 RPM) or a FW 800 7200 RPM external drive.
h.264 files from the camera are much smaller than transcoded ProRes files, so they will play back from USB 2 or firewire 400 drives, but I would only do it in a pinch.
enjoy your editing.

Error while compiling the procedure

Hi all,
When i compiled a procedure i m getting the following error.
The following error has occurred:
PROCEDURE LIMSARCT.DELETE_OLD_DATA
On line: 62
PLS-00201: identifier 'SYS.DBMS_LOCK' must be declared
Details:
PROCEDURE LIMSARCT.DELETE_OLD_DATA
On line: 62
PLS-00201: identifier 'SYS.DBMS_LOCK' must be declared
Kindly help me on the issue.
Thanks.

Hi,
Thanks for ur response.
CREATE OR REPLACE Procedure DELETE_OLD_DATA
(table_name IN VARCHAR2,
time_var IN VARCHAR2,
max_age IN NUMBER)
IS
-- Purpose: slowly delete old data (older than MAX_AGE days old) from a table
-- using dynamic SQL. Input parameter TIME_VAR is the key date field in the table.
-- MODIFICATION HISTORY
-- Person Date Comments
-- M Panarusky 00-11-13 procedure created
cursor_id integer;
sql_string varchar2(100);
return_var integer;
oldest_date date;
age_var number;
TIME_INCREMENT constant number := 0.004; -- about 6 minutes
BEGIN
-- open a cursor
cursor_id := DBMS_SQL.OPEN_CURSOR;
-- determine age of oldest record in table
sql_string := 'select min(' || time_var || ') from ' || table_name;
-- parse the cursor and define the output column
DBMS_SQL.PARSE(cursor_id, sql_string, DBMS_SQL.NATIVE);
DBMS_SQL.DEFINE_COLUMN(cursor_id, 1, oldest_date);
-- execute the cursor and retrieve the output
return_var := DBMS_SQL.EXECUTE_AND_FETCH(cursor_id);
DBMS_SQL.COLUMN_VALUE(cursor_id, 1, oldest_date);
-- calculate age to delta days
age_var := round((sysdate - oldest_date), 3);
-- close the cursor
DBMS_SQL.CLOSE_CURSOR(cursor_id);
-- open the cursor again
cursor_id := DBMS_SQL.OPEN_CURSOR;
-- delete records
loop
age_var := age_var - TIME_INCREMENT;
exit when age_var < max_age;
-- build an SQL string
sql_string := 'delete from ' || table_name || ' where ' || time_var ||
' < (sysdate - ' || age_var || ')';
-- parse and excute the cursor
DBMS_SQL.PARSE(cursor_id, sql_string, DBMS_SQL.NATIVE);
return_var := DBMS_SQL.EXECUTE(cursor_id);
commit;
dbms_lock.sleep(2); -- wait 2 seconds
end loop;
-- close the cursor
DBMS_SQL.CLOSE_CURSOR(cursor_id);
END DELETE_OLD_DATA; -- Procedure
ORCALE VERSION - 8i Developement tools - Toad.

Editing and Enlarging the Print/Fonts In Acrobat 10 Pro For Mac

Hello:
I need a step by step guide - meaning do this, then do that, then do this, etc. to the following.
I am an actor. I usually get scripts sent to me as a PDF File. I have poor eyesight. All I want to do is to able to go into the PDF file I get sent as a script, hight light the lines of my part and enlarge the print, and font, if I wish. Then I want to save it, and then print it, with these newly edited procedures. In other words when I print it, I want that enlarge print to print out. This is so much easier on a Word Document, where you can high light and enlarge and print. Why it's so difficult with PDF is beyond me. Please don't suggest I convert the PDF to a Word Document. I have done that in the past, and every time I try to enlarge the print, front a transported PDF to WD,the text is scrambled. Thank you so much for any help.

Unfortunately, Acrobat isn't made for that type of editing.
For starters, it will not reflow text.
Sorry but the best I can suggest is to copy/paste in to a Word document or save as a Word document.
If that doesn't work, you can try this free online convertor http://www.pdftoword.com/ . I've had unusually good luck using it.

I'm unable to delete a message. When I select edit and hit the red ( | ) button it reverts back to (-) before I can delete the message.

I'm running IOS 4.3.3(8J2) on an Iphone 4. When I try to delete a message by editing and then selecting the red (|) before I can delete it the delete button goes away and reverts back to the . I also noticed since this has started that my battery drains quite quickly now. Is this a bug in the current IOS release?

I'm having the EXACT same problem! I look forward to getting an answer since no one seems to know why this is happening.

Grant to edit and execute a procedure.

Dear All,
My Database is 11gR1 and OS is Linux.
There is a procedure in one of my schema, and i want to assign edit/drop/alter rights of this procedure to a particular DB user.
When i assign rights it says only execute and debug rights can be associate with a user.
When i give debug and execute rights user can not alter the procedure.
Regards, Imran

Hi,
CREATE ANY or ALTER ANY or DROP ANY should be the very last option considered! These privileges allow the grantee to master ANY (ALL) tables stored on your database, which is not what you have probably intended (and should be granted only to DBAs).
Think of creating a dedicated "application schema owner" account instead of storing the objects (tables, views, procedures...) under your own schema (user).
Grant the DMLs (SELECT, INSERT, UPDATE, DELETE, EXECUTE) to Roles, then grant Roles to Users.
Any DDLs (CREATE, ALTER, DROP) should and may remain only for the "appliction schema owner" account and DBAs.
Best regards,
Krzysztof

How to import and make the content of the original PDF document editable and preserves the pdf appearance and retains existing fields and formatting in LiveCycle

Can someone tell me how I can see my content (artwork and text) after I import it into LiveCycle Designer ES4? I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

Can someone tell me how I can see my content (artwork and text) after I import it into LiveCycle Designer ES4? I like to import and make the content of the original PDF document editable; preserves the pdf appearance and retains existing fields and formatting, then allow me to do the modifications and save it back into the original PDF document with changes. I have tried everything but still cannot see my content(artwork and Text) of my original PDF after importing it into LiveCycle. All I see are is a blank page with the formatting and layout of where my artwork and text should be. I like to see everything if possible so after I make my change I will know how it will look when I save it back into the PDF and open it in Acrobat Reader.

Changes are not reflected after editing and saving the chart in th WAD 3.5

Hi all,
I have to display the chart in the report using WAD 3.5. But after creating a chart and then when ihave to make extra changes again and save the same, the changes are not reflected. I can see only the previous changes.
I am working on the chart for the first time. please let me know about the problem. My changes to the chart are not getting reflected.
Please help.
Thanks
Rani

How r u changing the graph??
Hope you are doing a right click and selecting Edit Chart. Click on Refine.
Then Click on Next till you get the button Complete. After you click on Complete, you save the Template.
Hope you are following these steps.

Bug while editing and compiling the procedure

Similar Messages

Maybe you are looking for