Bug while making a PDF plus layers pallete bug

in CS6 13.0.4 x 64, the PDF process is iffy for me. Sometimes it's fine. But other times, an incomplete image results. Is this related to the overall type bugginess that Adobe recommends we fix (which I've not yet done)...? (http://helpx.adobe.com/photoshop/kb/troubleshoot-fonts-photoshop-cs5.html)
I'm lazy, but also, I don't have a lot of confidence I'll do it correctly, and I have a myriad of deadlines every week.
While I've your eye, here's another question relating to the layers palette:
Layers sometimes stick to my curser and I can't unstick them until I go back to the palette and try to place them back where they orignally were. (I'll be really embarrassed if this is a new feature of CS6 that I've not figured out yet...)
Thank you in advance for help on these two items.

Unlikely that the PDF issues relate to fonts per se. More like the PDF Flattener doing something wrong or not doing anything to retain appearance based on your PDF export settings. Pixel data in PDFs only gets tiled, if a visual construct you use requires it to be flattened and apparently that goes for some reason wrong. and your "sticky" layers probably point to graphics or input device issues on your system, so check your graphics and tablet driver and such.
Mylenium

Similar Messages

  • In Design crashes while making interactive pdf

    I'm having problems exporting an InDesign file as an interactive .pdf. The file crashes about half way through the document on a specific page number (33). The InDesign file is set up with buttons and bookmarks. I have 4 other files which are different sections of the same document which all export fine. Could this be a problem with the buttons and bookmarks or could it be a problem with the placed image on page 33? Any help gratefully received. Thanks@

    Just because it crashes on page 33 doesn't mean that's the problem page, nor does it indicate that if you can export in chunks including page 33 that there isn't a problem page.
    There could of course be a problem page before or after page 33, perhaps the way certain frames are threaded, or images across spreads etc.
    I'd be inclined to setup a new document with identical master pages (set them up from scratch) - same margins etc.
    Then in the problem document choose the Pages Panel select all pages, and go to the fly out menu and choose Move Pages.
    You are then given the option to move your pages to the New Document.
    Try exporting from the new document.
    Just to note - I wouldn't bother tidying anything up before trying the pdf - this is a troubleshooting stage - and if it works from the new document, then do your tidy ups.

  • How to reflect a new field in Bank data while making payment through F-53?

    Hello Experts,
    How can i reflect a new field (payment reference) in bank data while making payment through F-53?
    I have tried to do it by Field status group(OBC4) but the same is replicating in vendor invoice but not in vendor payment.
    I tried it at both level,fsg anf posting key,But no use.
    Is there any other process to make available and required field in BANK DATA of vendor payment?
    Please suggest .
    Regards,
    Sumeya offrin

    Hello Sumeya,
    Please consider note 145864 which explains what you have to do to
    make this field visible in your selection criteria:
    "In Transaction FB00 (Financial Accounting Editing Options -> Open items
    activate the flag 'Payment reference as selection criterion'.
    This is valid for incoming payment; please test if the same procedure
    is valid for outgoing payment as well.
    I  check the  issue, and unfortunately these function seems to not be supported for vendor open items.
    When you try to select the 'Payment Reference' in Additional selections
    the following messages is arised:
    'No account specified, items selected via document no. or reference'
    That means,when you do not specify an account in F-53 you can only
    via Reference and/or document. This is not a bug but system design.
    For additional reference you can check the note 451105.
    The note made clear that the specification of an account is required for vendors during the selection via payment
    reference.
    Kind Regards,
    Fernando Evangelista

  • Acrobat vs Livecyle - which is better for making accessible PDF's

    I am having a very hard time making my PDF accessible. The source program I use to create my document is InDesign 5.5. I convert to PDF and am attempting to tag it using Acrobat X. I tried tagging my form using the articles panel in InDesign but it doesnt convert to PDF properly (which i learned at this forum is a system glitch). Someone at work suggesting using LiveCycle but I am not familiar with LiveCycle at all. I thougt it was an add-on extension to Acrobat so I'm confused why someone would tell me to use LiveCycle instead of Acrobat X. Can someone please clarify for me what the diff is between Acrobat and Livecyle. I need to make my document accessible by the end of the week and having a lot of problems doing it but i want to make sure that Acrobat is the best adobe product to use before going any further.
    Any help is GREATLY appreciated!

    Hi miss forms,
    I'm out of the country just now and "on-line" time is occasional. However, here are some observations for your consideration.
    All this may sound daunting. It is not (honest). Think of it as becoming a competent cook.
    Some study. Some practice then it is Rachael Ray time.
    ~~~~~~~~~~~
    Here's a short take:
    Use InD CS 5.5 to master the underlying "form text".
    Master content with accessible PDF in mind.
    Example - if any "headings" are to be used then use InD built-in paragraph tags.
    Output the tagged PDF.
    Walk the structure tree. Perform requisite post-processing activities.
    Goal is to acquire that well-formed tagged PDF.
    Next, build the form fields.
    Properly fold these into the structure tree.
    ~~~~~~~~~~~
    Observations:
    "... but i want to make sure that Acrobat is the best adobe product to use before going any further."
    Currently and for the foreseeable future - if  you must provide accessible PDF as a deliverable you must have Acrobat Pro.
    You want the most current version and you want to keep it updated.
    Currently there is no such thing as an accessible PDF that does not require post-processing by a knowledgeable "warm-body".
    As the 'warm-body' you perform the essential V&V prior to release of the deliverable.
    While there are tools to help with they still do not replace the 'warm-body'.
    "I need to make my document accessible by the end of the week ..."
    This could be problematic. Unless you are all ready well versed in what a well-formed tagged PDF is and how to stage it in the authoring file I suspect that you won't have a proper deliverable by 30 November.
    Using InD CS 5.5 is 'good' but it is not (as you've discovered) adequately robust for well-formed tagged PDF output compared to the current release.
    The output PDF needs manual remediation (only possible with Acrobat Pro).
    As to any current authoring application used -
    Whatever is used it needs to provide robust "tag management".
    Currently the first string consists of:
    Adobe FrameMaker,
    Adobe InDesign,
    (n.b., Adobe has invested significant resources in improving mastering content for accessible PDF and output of tagged PDF InDesign versions released since CS5.5. So, if InD is your requisite authoring application I'd recommend you move into the current release.)
    MS Word 2010.
    When using MS Word 2010 one can use the MS Save As PDF - XPS configured to provide accessible PDF or use
    PDFMaker.
    For Word 2010 you'd need at least Acrobat X in order to have a compatible PDFMaker.
    Some other applications are also providing for authoring / tagged PDF output (such as Open Office).
    Regardless of the authoring application used Acrobat Pro is still need for requisite post-processing (structure tree V&V, cleanup, etc).
    What form "type" to use?
    I'd recommend Acrobat forms rather than XFA forms.
    Accessible XFA forms are possible.
    But, As George said - a non-trivial learning curve for the basics. Then comes the learning / practice to develop the accessible XFA form.
    If you go with XFA I suggest obtaining the XFA spec that Adobe provides.
    Considering the improvements Adobe has made in Acrobat XI for Acrobat forms I'd recommend you use that.
    However, if you have an older version you can still get there from here (using Acrobat Pro).
    "Tools" considerations:
    Common Look PDF - An enterprise level tool.
    A plug-in for Acrobat.
    Common Look Office Pro
    (Pro supports PDF forms (Acrobat forms - not XFA forms)
    An add-in / plug-in for MS Office 2007/2010.
    Used with Power Point or Word.
    Provides check points on mastered content. You resolve identified issues then use it to output a tagged PDF.
    Perfom requisite post-processing with Acrobat Pro.
    http://www.commonlook.com/CommonLook-office
    MS Word 2010
    Provides content mastering "coaching" for output of accessible PDF.
    PDF Accessibility Checker
    A "validation" tool.
    http://www.access-for-all.ch/en/pdf-lab/pdf-accessibility-checker-pac.html
    AIIM's PDF/UA, Universal Accessiblity
    http://www.aiim.org/Research-and-Publications/Standards/Committees/PDFUA
    The "Achieving WCAG 2.0 with PDF/UA" is available.
    The Implementation Guides are in the oven.
    ISO 14289-1:2012 (ISO standard for PDF/UA)
    Available for purchase at ANSI's web store.
    ISO 32000-1 (ISO standard for PDF)
    Section 14.8 discusses tagged PDF.
    Free, ISO approved copy available from Adobe.
    http://wwwimages.adobe.com/www.adobe.com/content/dam/Adobe/en/devnet/pdf/pdfs/PDF32000_200 8.pdf
    I've tried to harvest accessible PDF documentation Adobe's provided since Acrobat 5.
    Have most of it my "eReference Shelves"; but, that's at home.
    What's nice about these documents is that you can harvest activity specific information with confidence that it is an appropriate "reciepe".
    If interested in adding these to your "shelves" let me know.
    Use this forum's PM feature.
    Be well...

  • Can Adobe reader on my iPad display PDFs with layers?

    Can Adobe Reader on my iPad display PDFs with layers?

    Hi,
    Currently, Acrobat DC mobile products (for iOS and Android) do not support any changes to layer visibility.  So you are not able to turn on or off layers in a PDF document using Acrobat DC for iOS.
    Would you file a feature request?
    Adobe - Feature Request/Bug Report Form
    Our Product Management team will take your feature request into consideration for a future release.
    Thank you.

  • CS4 Saving to PDF destroys layers

    In CS3, there was an 'export to pdf' which just converted the PSD to PDF.
    Now in CS4, the option is under 'save as'. The problem is when I am doing a job and want to get approval, I like to generate a low res PDF WITHOUT the option of 'preserving photoshop editing capabilities'. Otherwise, I get aa huge file.
    The problem is, the document in Photoshop is now a PDF and although the layers are still showing in the layers pallet, if at that point, I do any more editing or just try to save it as a PSD, the image is automatically flattened, without any warning. I managed to lose all my work by saving AFTER I created the small PDF.
    why has adobe chosen to change the working document to PDF? If I save as a jpg, the document remains as a PSD file. This is very frustrating. I much prefer the export to PDF in the CS3 version.
    If CS4 is doing this, it should at least generate a warning that all layers will be merged at that time.

    As far as I remember PDF has always been a save feature in Photoshop and
    if you take the time to look at all the options you'll see a save with
    Photoshop compatibility.
    I usually just use the save a copy command.
    Bob

  • Annoying layers pallette problem

    Hi. It seems that whenever I alt tab from photoshop my layers pallete minimizes, making me have re-open it every time I switch back to photoshop. Very annoying when reading tutorials or checking bridge/web. I'm sure it never used to do it but not sure what I could of possibly done to change it. Can't for the life of me figure out how to fix it.
    Any help?
    Thanks.

    Try using Nokia ovisuite
    You can download it from Nokia.com/ovisuite
    Please THANK me by clicking on the ****WHITE STAR** ( Giving KUDOS) the big GREEN BOX to your LEFT .
    It will help me to serve you better !!!!!
    Thanking You

  • Is it possible to rearrage buttons in the layers pallet?

    I would like to do this because I find it very akward to have everything in the top section of the layers pallet, while just a few buttons are way down on the bottom. I've been using SAI for years and would like to transition over to photoshop for painting.  Would it be possible to move all the buttons along the bottom row in the layer pallet to the top, just under everything else using scripting? If not, is it possible to create an alternate layer pallet using scripting or plugins?

    Yes, it is absolutely possible.
    So long as each button on the layers panel is associated with its own keyboard shortcut, then this can be done easily.
    With Autohotkey, you can create your own toolbars and place them anywhere on the Photoshop screen. Each button you create will have its own icon image (.bmp for example), and when clicked on, will send its keyboard shortcut to Photoshop.
    For example:
    If you want to add a 'new layer' button to your new custom toolbar, you just create your own little .bmp image of new layer (whatever you want it to look like, maybe a red '+' sign), then program the button to send  'ctrl/shift/n' to photoshop, and it will add a new layer to Photoshop whenever you click this button. This allows you to ignore the default 'new layer' button that's on the bottom of the layer panel and instead use your own custom button. You can have this button appear anywhere on your photoshop screen; it allows you to drag it anywhere on the screen. You can add unlimited buttons wiht unlimited keyboard shortcuts to your custom toolbar and have it look anyway you wish - you design it.
    ww.autohotkey.com

  • Error while opening a Pdf in Acrobat 9.3.4

    Hi
    Am getting the below error message while opening any pdf on Citrix (built on Windows 2003 Server) with Acrobat 9.3.4.
    Has anyone else also seen the same? and how to resolve the same?

    Update:
    Opened the Pdf and found out that the certified signature has become invalid.

  • My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    My iphone 4S has problem in making and receiving the calls. While making the call , call fails and netwrok disappears. Like wise no voice is heard for incoming calls. This happened after return from the overseas travel.

    Hello SamSax
    Check out the assist page below for troubleshooting call connectivity.
    Calls and connection issues
    http://www.apple.com/support/iphone/assistant/calls/
    Thanks for using Apple Support Communities.
    Regards,
    -Norm G.

  • Error while making connection with remote oracle database

    Dear,
    I am trying to make connection with oracle database but when i run java file it's raise an error "classnotfoundexception oracle.jdbc.driver.oracledriver"
    DriverManager.getConnection(
      "jdbc:oracle:thin:@erp:1521:ORCL", "apps",
      "apps");
    Pls any body have idea.
    Thanks.

    Thanks for support.
    Below is error which i am getting while making connection with remote database.
    C:\Program Files\Java\jdk1.7.0_05\bin>java OracleJDBC
    -------- Oracle JDBC Connection Testing ------
    Where is your Oracle JDBC Driver?
    java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver
            at java.net.URLClassLoader$1.run(URLClassLoader.java:366)
            at java.net.URLClassLoader$1.run(URLClassLoader.java:355)
            at java.security.AccessController.doPrivileged(Native Method)
            at java.net.URLClassLoader.findClass(URLClassLoader.java:354)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:423)
            at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:308)
            at java.lang.ClassLoader.loadClass(ClassLoader.java:356)
            at java.lang.Class.forName0(Native Method)
            at java.lang.Class.forName(Class.java:186)
            at OracleJDBC.main(OracleJDBC.java:13)
    Advice.

  • I face a problem  while making a confirmation on portal.

    Hello ,
    Can anyone help me I am facing a problem while making confirmation in the portal.
    the system pops up an error as mentioned below. Please help
    •     Folgender Fehlertext wurde im System SRP prozessiert: Speicherungsform der Produkt-ID ist im Customizing noch nicht definiert
    •     Der Fehler trat auf dem Applikationsserver eccprd-srp_SRP_50 und im Workprozess 3 auf.
    •     Die Abbruchart war: TH_RES_FREE
    •     Die ABAP-Aufrufhierarchie war:
    Form: READ_SETTINGS of program SAPLCOM_PR_CONVERSION
    Function: CONVERSION_EXIT_PRID1_INPUT of program SAPLCOM_PR_CONVERSION
    Function: BBP_PDH_PRODUCT_READ_BUFFER of program SAPLBBP_PDH
    Form: GET_LOCAL_PRODUCT of program SAPLBBP_ECI
    Form: APPLY_OLD_MAPPING of program SAPLBBP_ECI
    Function: BBP_PRODUCT_MAP of program SAPLBBP_ECI
    Function: B31I_PO_GETDETAIL of program SAPLBBP_BD_DRIVER_31I
    Function: META_PO_GETDETAIL of program SAPLBBP_BD_META_BAPIS
    Function: BBP_BE_PO_GETHISTORY of program SAPLBBP_PDH_HISTORY
    Function: BBP_PDH_SEARCH_PO_SUBLIST of program SAPLBBP_PDH_SEARCH
    Best Regards,
    Sairam

    Hi,
    Pls see if the foll notes are useful.
    <b>Note 911217 - Copy vendor product number from contract search help to PO</b>
    1047769 - No returns for search by Product ID in Monitor Shopping Cart
    Note 1023012 - BBPSC: Long product ID triggers short dump
    BR,
    Disha.
    Pls reward points for useful answers.

  • ORA-00607: Internal error occurred while making a change to a data block

    hi
    i hv use testing purpose oracle 10 Xe in unix
    but when today i hv connect database following error occured
    SQL> startup
    ORACLE instance started.
    Total System Global Area 83886080 bytes
    Fixed Size 1257284 bytes
    Variable Size 75497660 bytes
    Database Buffers 4194304 bytes
    Redo Buffers 2936832 bytes
    Database mounted.
    ORA-00607: Internal error occurred while making a change to a data block
    ORA-00600: internal error code, arguments: [4193], [625], [640], [], [], [],
    I hv check alert log , but no proper solution is given , how can start database

    Duh, and of course I missed the significance of
    oracle 10 Xe in unix
    XE is only supported for Linux - according to the downloads page that means "Debian, Mandriva, Novell, Red Hat and Ubuntu".
    Oracle have not publically stated the reasons why XE is only available on Linux and Windows, but my guess is that it is something to do the Intel chip architecture. If this is so it would be possible for Oracle to port XE to run on Solaris for x86. But they have not done so yet.
    Which means, alas, that you are unlikely to get any help for this one, because XE is not supported on any unix platform.
    Good luck, APC

  • While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this Iphone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this I

    While making a backup copy in Itunes of my Iphone I receive the following error message: While making a backup copy of this iPhone (-35) an error has occurred.  Do you want to continue with altering this Iphone? When you continue al the material on this Iphone will be lost.
    I reinstalled iTunes but that dit not help. After synching iTunes with my iPhone it also asks to authorize my pc and when i Click on ok, it says it is already authorized.
    Please can somebody help me, so I can make backup.
    Greetz,
    Derk

    It's likely that your backup is corrupt. Try deleting the backup, then right click on the name of the phone in iTunes and choose "back up". To delete go to iTunes Preferences, Devices tab. Highlight and delete the most recent backup. Note that sometimes deleting this way leaves some garbage around that can still interfere with a new backup, so you should verify that the backup folder is empty.
    from: http://support.apple.com/kb/HT4946
    The folder where your backup data are stored varies depending on the computer's operating system.   Make sure the backup folder is included in your periodic data-backup routine.
    iTunes places the backup files in the following places:
    Mac:  ~/Library/Application Support/MobileSync/Backup/
    Windows XP:  \Documents and Settings\(username)\Application Data\Apple Computer\MobileSync\Backup\
    Note: To quickly access the Application Data folder, click Start, and choose Run. Type %appdata% and click OK.
    Windows Vista and Windows 7:  \Users\(username)\AppData\Roaming\Apple Computer\MobileSync\Backup\
    Note: To quickly access the AppData folder, click Start. In the search bar, type %appdata% and press the Return key.

  • Error  while exporting in pdf in crystal report XI

    Post Author: Siddheswar
    CA Forum: General
    hi
    I am getting the following error in crystal report XI while exporting to pdf.
    The Error:
    Method 'ISCREditableRTFExportFormatOptions_reserved5' on type 'CrystalDecisions.ReportAppServer.ReportDefModel.EditableRTFExportFormatOptionsClass' from assembly 'CrystalDecisions.ReportAppServer.ReportDefModel, Version=11.0.3300.0, Culture=neutral, PublicKeyToken=692fbea5521e1304' is overriding a method that has been overridden.
    Please Help.
    Thanking in advance.
    Regards
    Siddheswar

    The stack trace is caused by whitespace in your CrystalReportViewer.jsp file.  Look up SAP Note 1199025 for the resolution.
    It's not related to the PDF formatting issue.  There's been changes to the formatting with the most recent version - Crystal Reports for Eclipse 2.0 - so if you haven't already, I recommend you upgrade.
    Note that there's differences in font metric calculation when using Adobe PDF format such that there's no way to get exact agreement between output of the CR and PDF.  But the latest version helps greatly.
    Sincerely,
    Ted Ueda

Maybe you are looking for