Bug with 1.2 (podcasts and on-the-go playlists)

Previously, I was able to add podcasts to an On-The-Go playlist, and listen to them one after another just like a group of songs. Great for mowing the lawn. And yes, I think I will have to have one of the new shuffles.
Anyway, after installing 1.2 (on my Windows formatted 60GB 5G iPod) it's not letting me do that any longer. I do the same procedure as before, but when I click a podcast track in the on-the-go playlist, it just repeats that track over and over like it does when picking it from the podcasts menu.
Just for kicks I tossed both music tracks and podcasts in the OTG playlist to see what happens. Same as above if I start with a podcast. If I start with a music track it flips through the songs normally and ignores the podcasts.
Anyone else notice this?
PS: I'm addicted to Texas Hold'em. Nice work with that one!

Yes, there's no way this can be considered proper operation. After reading this thread and doing some more experimentation, I have found that the work-around is to uncheck the "Skip when shuffling" option for each podcast. However, this is definitely a bug for the following reasons:
Set the iPod's Shuffle setting to none. Then go to a playlist (or make an on the go playlist) with a Podcast who's "Skip when shuffling" option is checked. The bug is still present. If this were an intentional change for playlists to honor the "Skip when shuffling" setting of a song or podcast, then it shouldn't have any effect when not shuffling.
The second thing is to think about what is meant by the "Skip when shuffling" setting. In iPod firmware 1.1.2 (the last one), if you picked "Shuffle Songs" from the iPod main menu, it wouldn't select songs/podcasts with the "Skip when shuffling" setting checked. However, anything a user added to a playlist should always be played when playing that playlist. This is what the 1.1.2 iPod software did and it is what users expect. Having to uncheck the "Skip when shuffling" setting for every podcast that gets downloaded before they can be used in a playlist is ludicrous.

Similar Messages

Interesting occurance with 1gb ipod nano and on-the-go playlist creation ..

interesting occurance with 1gb ipod nano and on-the-go playlist creation might be helpful to some.
NOTE: the feedback form isnt up to date for software versions for 1gb ipod nano (newest here is 1.1.1 but i have 1.3.1).
it seems i cannot create on-the-go playlist by holding album OR artist, with my 1gb ipod nano with VERSION 1.3.1 software, if there are various sizes of playlists in my ipod. i had about 4 playlists with 1 song in them and 2 -3 playlists with 5 - 30 songs in them. total space on ipod used was about 400mb of 896mb and about 1500 songs (most poor quality to save space (18-48kbs - i noticed some of the lower qualities have overtones of whistle or cricket like sounds (i have many ambient songs birds, thunder storms, etc)).
i just manually deleted ALL playlists also deleted 945 songs on my ipod with itunes, and now i am able to do it. i can even do it now with composer or genre etc (which isnt listed in the playlist creation instructions). i now have 612 songs with 113mb free.
p.s. i tried to leave this as bug feedback but got a strange message that was like a command pointing to a thank you for leaving feedback page.

I have got this problem with my new 8gb nano too. Its very sad I had my mini stolen from my person whilst in a hospital bed dozing and it worked from the same itunes list and I could add albums or artists or songs now on the new replacment nano I can only add songs. Very annoying, please let me know if anyone can solve this. I too have reset and restored it numerous times. I am in the uk I think you are in the states.
Windows xp Windows XP

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

How can I get TV shows viewed through Hulu Plus on the Apple TV 3 to show as widescreen with black bands above and below the screen shot instead of chopping off the sides on my non-widescreen TV?

I just bought a new Apple TV 3 today so I can watch shows from Hulu Plus without having to physically plug in separate audio and video cables from my Macbook Air to the TV every time. I have a non-widescreen TV and when I normally watch Hulu Plus on the TV (though Safari on my plugged in Macbook Air as mentioned above), the entire wide screen shot is shown with black bands above and below the sceen shot since I am watching a widescreen program on a non-widescreen TV.
However, I noticed that when I watch the same show through Hulu Plus on my new Apple TV 3, the left and right edges of the shot are chopped off to make the program fill my non-widescreen TV. This bothers me because I would like to see the full shot and not just the chopped off middle portion. This is a real bummber because watching Hulu Plus without having to plug in my laptop is the only reason I bought the Apple TV. Is there anything I can do about this?
Thanks!
(FYI: I have the very first Macbook Air that is not capable of mirroring)

How are you actually connected to the TV? Does it have HDMI? Most non-widescreen TVs would not.
I would suspect a converter is either not outputting properly, your TV not interpreting the signal properly or you have some form of Zoom setting enabled on the TV.
How does your TV handle widescreen from say cable or terrestrial TV sources ?
Unfortunately AppleTV is not designed to be used with non-widescreen TVs so there's no setting on AppleTV to tweak.
AC

I would like to use my deactiveted iPhone 3G for apps and music. How do I add music? When I synch with iTunes it won't add the selected playlists.

I would like to use my deactiveted iPhone 3G for apps and music. How do I add music? When I synch with iTunes it won't add the selected playlists.

See if this link offers any insight,
Use iPhone as an iPod
http://support.apple.com/kb/HT3406

Is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

is there a way to get photos off of a thumb drive onto something that can be uploaded to the ipad. I am doing away with my windows systems and using the ipad exclusively?

iPad Photo Recovery: How to Recover Deleted Photos
http://www.iskysoft.com/iphone-data-recovery-mac/ipad-photo-recovery.html
How to Restore Lost or Deleted Files from iPad
http://www.iphone-ipad-recovery.com/recover-ipad-mini-files.html
How to Recover Deleted Files from iPad
http://www.kvisoft.com/tutorials/recover-deleted-files-from-ipad.html
How to Recover Photos from iPad
http://www.ipubsoft.com/idevice-tips/recover-deleted-photos-on-ipad-mini.html
iSkysoft Free iPhone Data Recovery
http://www.iskysoft.com/iphone-data-recovery/
Recover iPhone/iPad/iPod touch lost data, Free.
Free recover iPhone/iPad/iPod touch lost contacts, photos, videos, notes, call logs and more
Recover data directly from iPhone or from iTunes backup
Preview and recover lost iOS data with original quality
Wondershare Dr.Fone for iOS
http://www.wondershare.net/data-recovery/iphone-data-recovery.html?gclid=CJT7i9e 6gb4CFcvm7AodbUEAJQ
Recover contacts, messages, photos, videos, notes, call history, calendars, voicemail, voice memos, reminders, bookmarks and other documents.
iPad Data Recovery Software (PC & Mac)
http://www.anysoftwaretools.com/ipad-data-recovery.html
Jihosoft Mobile Recovery for iOS
http://www.fonerecovery.com/iphone-data-recovery.html
 Cheers, Tom

'The termination occurred in system E03 with error code 403 and for the rea

hello gurus,
i am very new webdynpro for abap.i strucked in one place at the time of designe a webdynpro component.
i created one webdynpro component with one view.when i am going to design the view it is showing an error like .
Service cannot be reached.
'The termination occurred in system E03 with error code 403 and for the reason Forbidden'
for this we need to activate some service at sicf transaction level.
could anybody suggest me which service i need to activate to overcome my problem.
best regards,
raja.

If you are creating webdynpro component for first time then check the below link and activate the service mentioned.
http://translate.google.co.in/translate?hl=en&sl=de&u=http://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008b4d9ae10000000a155369/content.htm&ei=C56BTqinCMTqrAfr5sycDg&sa=X&oi=translate&ct=result&resnum=1&ved=0CB8Q7gEwAA&prev=/search%3Fq%3Dhttp://help.sap.com/saphelp_nw70/helpdata/de/43/e86de5008
First check above one.
this is for understanding
http://sdnabape.blogspot.com/2010/11/step-by-step-configuration-for-running.html
Regards
Srinivas

Is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

is there a way to burn old cd's with new cd's and get the same volume/quality on playback?

RIP the CD as AIFF or WAV.
Create a playlist then burn an audio CD.

I record with a sony ax2000 and use the 1080 60i setting. what should i edit with when using adobe premiere ele 10

I record with a sony ax2000 and use the 1080 60i setting. what settings should I edit with when using adobe premiere elements 10?

smannino
You have duplicate threads on this issue related to project preset suggestion for your 1080 60i video.
I have responded to your question in the other thread
if i record with a sony ax2000 using 1080 60 i what is the best editing setting to use with elements 10?
Please reply in that other thread.
Thank you.
ATR

TS3297 I tried to download with a redemption code and got the message: "your computer isn't authorized"

I tried to download with a redemption code and got the message: "your computer isn't authorized" -- how do I do that?

Quit Safari, launch it directly from HD/Applications/ instead; trash the old version 5.1 on your Desktop... it isn't working with the Safari 5.1.1 system frameworks, and wasn't updated due to not being in HD/Applications/

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

Im switching email accounts on my itunes account am the computer isnt recognizing purchases made from my other account on the new one (apps). How can I sign in with my new account and get the purchases apps on both accounts?

This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that?

HT4898 What happens to my "Dock"? I use that every time I open my computer(s), along with various mail accounts, and even the Widgets?.

What happens to my "Dock"? I use that every time I open my computer(s), along with various mail accounts, and even the Widgets?. Thanks.

Using iCloud will not affect your dock or your widgets. If you upgrade to iCloud, your MobileMe mail account will be updated to an iCloud account, but that is all that will happen. What exactly is it that you are worried about.

How can I export photos from Aperture with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.

How can I export photos from APERTURE with a new sequence and ignore the embedded JPEG number? Have tried renumbering to no avail.
has anyone resolved this issue?
This is now the second big Problem with using Apple's Appeture with NO apparent FIX...
Aperture has NO DIRECT way to Burn to a CD/DVD & apparently NO way to RE-SEQUENCE the numbering system????
ANYONE... I wish APPLE would address/fix these 2 problems... LIGHTROOM I guess is next?

Hi David,
Coming in and whining loudly is rude. We are all volunteers here, voluntarily sharing our expertise so that users like you can make the most of their time with Aperture. Speaking just for myself: although I do care about your success with software (it's why I'm here), I don't care what software you use. If you want to use Lightroom, do so, and post your questions in an appropriate forum.
Burning files to a CD is a file operation done at the system level (it is built into OS X). Aperture lets your create sharable image-format files from your Images. You then use OS X's tools to burn those files to a CD. Iirc, you can set up a "Burn Folder" in Finder, into which you can export files created from your Images, and with a single click burn your CD.
Naming the files you create by exporting your Images can be tricky. There are _many_ possibilities. Some things can't be done. Sequencing can be done in a number of ways (see Léonie's answer above). What have you tried? What was the result? In what way did this differ from what you expected?
--Kirby.

Just bought new PC with windows 8.1 and installed the 64bit tunes as instructed by the new PC. Only a small part of my music library is now showing but can see all the files in the itunes folder on an eternal hard drive linked to my old XP pc.

Problem - changed PC to one with Windows 8.1 ( previous from 2006 with Windos XP). Previously all ITunes stuff on an external harddrive as 80 gigs of music too much for the old PC
When attached Harddrive to new PC was told needed to install the new 64 bit iTunes as 32 bit iTunes not compatable.
Did so but only a very small portion of my music is showning - though rest of Library is still on the external drive in the folder.
Help please
Thanks

Again many thanks. I have tried to tidy up the folders as per your idiot guide- which term is appropriate for me
Under iTunes Media though I do not have folders for Books,iPod Games, Mobile Applications, Movies, TV Shows so I only have Auto Add to iTunes, Music, Downloads and Podcasts - My question here is is this OK.
Next - Library files that you mention are there but do not end .itdb
Next - in the main iTunes folder followingon from Artwork and Media folders there is some other iTunes database stuff like Library Extras, Library Genius, Library and Music Library(xml) all dated 10/02/12 plus MimiPlayer .dll dated 21/02/14 and Set Up Short Cut dated22/03/14
AND there is also a Programme Files folder with a sub folder holding file folders called CD Configuration,iTunes Resources, iTunes Help Resources, iTunes Mini Player Resources and Mozilla Plugins all dated 24/03/14 ( when I downloaded the new iTunes) and then a lot of application extension stuff from 2011
To recap I unistalled the old 32 bit iTunes and installed the new 11.1.5 (64 bit) version over the weekend SO is any of the old stuff listed above required.
Outcome right now is that as previously I can only call up the Downloaded music not Podcats or CD copies.
Regards
David Pugh

Bug with use of TRn and nX editting in formatting and non advancing output

Hello.
I am using non-advancing output to print data values in columns in tables. Where a column doesn't have values
I use the TRn editor to skip over the column field. However, this doesn't work with non advancing output.
e.g., the following code doesn't work properly. The output is missing the 10 spaces between the data items.
(I tried changing TR10 to 10X and that didn't work either).
a = 1.0
b = 2.0
! Write data
write(10,'(F10.4)',advance="no") a
! Skip 10 places
write(10,'(TR10)',advance="no")
! Write data
write(10,'(F10.4)',advance="no") b
This works fine on all my other compilers, just not the one that comes with oracle studio 12.2.
Edited by: davidb on 16-Oct-2011 15:06

My original post wasn't too clear (sorry). The bug is with TR.
The following code should write the numbers 1 to 10 with four spaces separating each value. But no spaces are written.
program tst2
integer :: i
do i=1,10
write(10,'(I4)',advance='no')i
write(10,'(TR4)',advance='no')
end do
close(10)
end program tst2
In fact the file fort.10 which is produced contains
12345678910
Whereas, with gfortran, open64, ifort, nag Fortran compilers I get (there are four spaces, this forum just doesn't show them all):
1 2 3 4 5 6 7 8 9 10
Edited by: davidb on 16-Oct-2011 15:07

Bug with 1.2 (podcasts and on-the-go playlists)

Similar Messages

Maybe you are looking for