Bug with Access connexions with Windows vista Pro SP2

I wish to use Thinkvantage Access connexions on my Lenovo G550.
I previously used Acces connexions on Thinkpad and i like this tool.
I have installed Access connexions but I have troubleshooting beause my computer runs uner Windows vista Pro SP2.
Is a solution exist to resolve this bug ?

Hi and welcome to the forum!
As far as I know, Access Connections is only compatible with ThinkPads and few lenovo 3000 systems, see following from support page: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/85cv28ww.txt
Hope this answers your question.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

Similar Messages

No wireless access with Windows XP Pro (SP2) on Macbook Pro

Hello,
Just installed Windows XP Pro (SP2) on my new Macbook Pro using Bootcamp Beta. The installation has gone fine with the exception of wireless access to the internet through my Airport home network.
I've tried all the other configuraton wizards on XP...no joy.
The three other macs in the house (2 wireless, 1 ethernet) and one Windows laptop (wireless) are all fine and dandy.
Any suggestions on what to do?
Thanks
17 and 15 Powerbooks, iMac
17 and 15 Powerbooks, iMac

Right Click on My Computer
Select Manage
Click on Device Manager
Make sure that your Ethernet Adapters are working properly
If there is an red X or a yellow ! next to any ethernet adapter then try to reinstall the drivers.
(you can reinstall the drivers via the installation cd or double click on the hardware device under device manager. there should be a reinstall drivers button in there. point it to the CD that you burned from bootcamp)
(there will be a couple of devices that are not working properly.)
MacBook Pro Mac OS X (10.4.8)

HT1178 Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive. If so what software do I need to buy?

Can the time capsule be used with a pc running Windows Vista , 7 or 8 as a backup drive.
Yes, on XP, Vista and 7. Have not tried 8.
If so what software do I need to buy?
Genie Timeline Pro does a very nice job...and it is similar to Apple's Time Machine. It's not cheap though. Check with the Genie folks for more info and compatibility with Windows 8.
Genie Timeline Pro | Overview | Time Machine Backup Software for ...
Other users may have some other suggestions.

Initial issues with PS CS4 Extended Windows XP Pro.

Initial issues with PS CS4 Extended Windows XP Pro.
CS3 worked just fine but had many issues with Bridge CS3. So frustrating that the $$ to upgrade to CS4 seem worth it. Mostly works OK with the following exceptions:
1. Sometimes the file menu selections are non-selectable grey including fundamental functions like Open and Exit not even clicking on the x will allow PS to close! I found a workaround, I can select a tool that is not currently selected (like the crop or brush) and now the menu items appear.
2. The Arrange Documents drop down menu is blank except for the lower text portion. All icons are missing. Roll over text popup shows what is supposed to be on the menu but no icons.
3. I have setup Bridge CS4 to auto start at logon. Works OK but sometimes for whatever reason stays busy after I close. Task Manager shows Bridge using up to 25% of CPU time and the program is not even open!
5. I purchased a couple Canon EOS 50Ds as backup cameras for our business. Worked last week with CS3 and Bridge with Raw 4.6 upgrade. Does not work with RAW 5.0 in CS4bummer!

I had the same problem with blank/missing "Arrange Documents" icons. And I use NIK and OnOne plugins (CS4 & Vista). These plugins are all supposed to be compatible with CS4 and I use them ALOT - so I refused to remove them. Today I also started having a problem with an error re: needing to install a printer before I could select print functions.
I found the answer to both problems!! While researching the error message I found information from Adobe support stating that you should:
1. Quit Photoshop
2. Vista: Rename the Users\[username]\AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp file to Adobe Photoshop CS4 Prefs.old
Windows XP path: Documents and Settings/[username]/Application Data/Adobe/Adobe Photoshop CS4/Adobe Photoshop CS4 Settings/Adobe Photoshop CS4 Prefs.psp
3. Start Photoshop - it will create a new preferences file.
My print error message is gone AND I have Arrange Documents icons!!!

I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).

I need to know which update(s) I can apply to help stabalize the system.

Typing the body of the thread message in the title, huh? -)
I am working on a MacBook Pro (13-inch, Mid 2009) with boot camp running Windows 7 pro 64-bit. Windows crashes quite often now-a-days and I need to get this fixed. I heard that updating boot camp can help. Currently I am running Version 3.0.4 (322).
Only Apple could hamstring and tie Mac OS to Windows. There isn't any other than whether you can download the drivers into Windows (you can) but Apple puts a block on the installer setup even if your mac does not support it.
Windows 7 needs at least Boot Camp 3.1 and 3.3 is what you should already have. And you are not getting security updates if you don't have at least 10.6.8 as was pointed out. --- you arent using Software Update as you should. And you should backup and clone Mac (and Windows) as well.
You need Mountain Lion to use Boot Camp 5.x which supports Windows 7 & 8 and 64-bit.
I would upgrade to Lion if you can realizing that Rosetta and PowerPC are no longer supported though.
Mac 101: Using Windows on your Mac via Boot Camp
https://support.apple.com/kb/HT1461
http://www.apple.com/support/bootcamp/
Helpful Apple Support Resources (Forum Overview)
Boot Camp Support
Boot Camp Manuals
Boot Camp 5.0 Drivers
http://support.apple.com/kb/DL1638
Frequently asked question
http://support.apple.com/kb/HT4818
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.7.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdf
http://manuals.info.apple.com/en/Boot_Camp_Install-Setup_10.6.pdfcreate a Windows support software (drivers) CD or USB storage media
http://support.apple.com/kb/HT4407
The Boot Camp Assistant can burn Boot Camp software (drivers) to a DVD or copy it to a USB storage device, such as a flash drive or hard drive. These are the only media you can use to install Boot Camp software.
https://support.apple.com/kb/HT4569
http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf
Instructions for all features and settings.
Boot Camp 4.0 FAQ Get answers to commonly asked Boot Camp questions.
Windows 7 FAQ Answers to commonly asked Windows 7 questions.
http://www.apple.com/support/bootcamp/
Is there a download of the Boot Camp 5 Support Software if I'm not using OS X Mountain Lion v10.8.3?
Yes, you can download the Boot Camp 5 Support Software here.
http://support.apple.com/kb/DL1638
How do I use the Boot Camp 5 Support Software I downloaded from the web page?
The download file is a .zip file. Double click it to uncompress it.
Double-click the Boot Camp disk image.
Copy the Boot Camp and "$WinPEDriver$" folders to the root level of a USB flash drive or hard drive that is formatted with the FAT file system (see question below for steps on how to format).
Install Windows, leaving the flash or hard drive attached to the USB port of your Mac.
Installation of the drivers can take a few minutes. Don't interrupt the installation process. A completion dialog box will appear when everything is installed. Click Finish when the dialog appears.
When your system restarts your Windows 8 installation is done.
Note: If the flash drive or hard drive was not attached when you installed Windows and was inserted after restarting into Windows 8, double-click the Boot Camp folder, then locate and double click the "setup.exe" file to start the installation of the Boot Camp 5 Support Software.
How do I format USB media to the FAT file system?
Use Disk Utility to format a disk to use with a Windows computer. Here's how:
Important: Formatting a disk erases all the files on it. Copy any files you want to save to another disk before formatting the disk.
Open Disk Utility.
Select the disk you want to format for use with Windows computers.
Click Erase, and choose one of the following from the Format pop-up menu:
If the size of the disk is 32 GB or less, choose MS-DOS (FAT).
If the size of the disk is over 32 GB, choose ExFAT.
Type a name for the disk. The maximum length is 11 characters.
Click the Erase button and then click Erase again.
Which versions of Windows are supported with Boot Camp 5?
64-bit versions of Windows 8 and Windows 7 are supported using the Boot Camp 5 Support Software. If you need to use a 32-bit version, you need to use Boot Camp 4 Support Software, and you must use Windows 7. 32-bit versions of Windows 8 are not supported via Boot Camp. For a complete list of Windows OS support, click here.

Using colour profiles with Windows XP Pro SP2

Hi,
Freshly-installed WIndows XP Pro SP2 on the Unibody MBP.
I note that in the advanced display settings there is a tab for colour management. It offers the opportunity to add a .icc or .icx (I think) colour profile. I copied across my .icc-prefixed colour profile from my Leopard install, added it, and Windows reports it as invalid.
Can anyone tell me how (or whether it's possible) to make a Leopard-created .icc profile work with XP Pro SP2? If it's not possible, can someone suggest some free software for XP Pro SP2 that I can use to achieve a similar result?
Thanks.
SiR. G.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

IPhone 3G 2.1 connection error with iTunes 8 on Windows Vista Enterprise

I was previously able to connect my iphone with my work computer (Windows Vista Enterprise) and it would recognize my phone. However, since I updated my iphone to version 2.1, it will not recognize the phone and gives me the following error message:
"iTunes could not connect to the iphone because an unknown error occured (0xE8000024)."
I am able to connect my phone with version 2.1 to my home computer running Windows XP SP2.
Any idea what may be causing the connection error in Windows Vista?

Hey TranceCadet,
This could be caused by a USB connection issue.
Make sure the iPhone is directly connected to a high speed USB port on the PC and not plugged into a hub, monitor, or keyboard. Disconnect any other USB devices, other than the keyboard and mouse.
This article has some general USB troubleshooting tips: http://support.apple.com/kb/TS1286
You may also want to disable or reconfigure any security software. This article will walk you through putting the PC in a selective startup mode, which will bypass most application conflicts.
http://support.apple.com/kb/HT2292
Jason

Error with Contribute 3 on Windows Vista

Hi
With Contribute 3 on Windows Vista, does anyone know if
anything can be done about the following error:
Error 1904.Module
C:\Windows\system32\Macromed\Flash\Flash.ocx
Failed to register. HRESULT -2147220473. Contact
Your support personnel
MMxtp has stopped working
A problem caused the program to stop working correctly.
Windows will close the program and notify you if a solution
is available.
Many thanks
lukaro

I've got the same problem. Adobe support are hopeless since
they bought Macromedia. "We don't support Contribute 3 any longer.
You'll have to upgrade to CS3". Downloaded CS3 trial. Same
problems. "Sorry, we don't support trial versions of products" What
a bunch of wankers. How the hell do they expect anyone to buy their
products if 1. they don't work and 2. they don't support them. I'll
find something else to buy from now on.

Right-click with 2 fingers on Windows Vista taskbar and nothing appears

I just updated my Bootcamp to 2.1, I thought it would solve my problem
"Right-click with 2 fingers on Windows Vista taskbar and nothing appears" but I still have this problem, I cannot right-click on my windows vista at all.
though, right-click on the notification area works.
right-click = pressing the trackpad with 2 fingers.

Now I have figured out I have to use 3 fingers instead of 2 fingers.
but in the BootCamp Control Panel there is an option that says
* Use 2 fingers for right-click

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

''duplicate of https://support.mozilla.com/en-US/questions/905881''
Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...)

Hi Kossa,
You can also check if the issue occurs in
Clean Boot. If the issue disappears in the Clean Boot environment, you can continue to narrow down which entry is causing the issue.
Besides, uninstall it and re-download
a fresh copy of FireFox to check the result. If the issue still exists, create a new user account to see if it occurs.
If the issue persists, you can contact Mozilla Support directly and use Internet Explorer (IE) during the time.
J
Please Note: The third-party product discussed here is manufactured by a company that is independent of Microsoft. We make no warranty, implied or otherwise,
regarding this product's performance or reliability.
Regards,
Linda

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hey, I'm doing some cross browser testing and i want to know Is there any difference between the behavior of Firefox in an operating system 64bit & operating system with 32bit. (like windows7/windows vista...) Thanks,

Hi O_H_I_O,
Have you got an error code ?
Considering it is a brand new machine ,please update the machines .To get a better performance of the machines ,we should always keep it up to date .
There is a possibility that the DVD/CD-ROm drives driver is old or has corrupted .Please open the device manager , update or reinstall the driver to have a check.
Apart from this ,we can run the built-in tool to a diagnostic :
Control Panel\All Control Panel Items\Troubleshooting\All Categories\Hardware and Devices
We also can run the following fixit tool to have a check.
Fix problems with CD or DVD drives that can’t read or write media
http://support.microsoft.com/mats/cd_dvd_drive_problems
Best regards

Erro 3256 using Apple Airport Express with Windows XP Pro SP2

I am running Windows XP Pro SP2 and am trying to stream my music to the Livng room from my PC in my office. I use an Apple Airport Express. I am running iTunes 8.0.1.11 on the computer that isn't getting the signal through. Now please read the entire message before you decide it is the version of iTunes that I am using.
It was getting through just fine on my Denon 3300 but since I switched to a Denon 3802 the signal is not geting through from my main computer. It works fine from the computer sittng adjacent to it.
I also have music on a 2nd computer and am running iTunes 7.6.2.9 on it. The music gets to the living room stereo just fine using the same Apple Airport Express. The signal strength on the computer that is successful in streaming the music to the Apple Airport Express is "excellent". On the computer that is not successful, the signal strenth is "low". Now these computers are adjacent to each other and the signal has to go through the same wall and
exactly the same distance over the same network.
How can it be "excellent" on one and "low" on the other? Is it just a matter of signal strength? How do I fix that?
I keep getting "unknown error occurred 3256"
Help please. Do I have to do something to the network? or???
Remember I am a Windows user, not a Mac user. I do not have a "Configure IPv6" setting anywhere in my preferences. That must be a Mac thing.

Got the error message 3256 after downloaded latest itunes version 8.xx.
After days of reading logs and bullentin boards, uninstalling, hard resets,firewalls experiments, etc, I found solution for me. Following firmware upgrade to airport express solved. When you go to Apple download center and search for airport revisions only the MAc version pops up. However they do have this one for windows. Give it a try. Good luck.
http://www.apple.com/downloads/macosx/apple/firmware_hardware/airportexpressfirm wareupdate63forwindows.html

Windows XP Pro SP2 cd-rom after downgrading from Vista

Hi everybody.
I successfully downgraded my T61p from Vista to XP Pro SP2 using the downgrade cd-roms send by Lenovo.
Everything seems to work well. I downloaded all drivers. No problem.
But I recently installed a rather old software that I frequently used on my old A31p. This software (a Microsoft program !) has automatically modified some files from XP Pro without any autorization.
Once it was done, I was asked by the system to insert the original Windows XP Pro SP2 cd-rom to repair this modification.
Of course, the (Vista to XP) downgrade cd-rom set was not recognized by the Thinkpad as the original XP set.
An original cd-rom which I finally don't have !
I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful.
Where could I find the XP Pro SP2 cd-rom corresponding to the downgraded system ?
Thanks for your help and suggestions.
Regards.
J.L.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

James,
thanks for your answer.
But I wrote on my first post "I tried with an original XP Pro SP2 cd-rom bought a few years ago for my A31p. Unsuccessful."
Thus, I don't see any difference between an original Microsoft Windows XP2 Pro SP2 version cd-rom and one created by burning a downloaded version of the OS. An original was not recognized, what would a copy do ?
If possible, it might be probably better to create an XP Pro SP2 cd-rom from the "Rescue and Recovery" files which were reinstalled when downgrading from Vista to XP. (I hate the word "downgrade" : while I was doing it, I had the feeling I was upgrading my Thinkpad !)
I have been using for several years (and still use) an A31p (Since 2002, 8 to 10 hours a day) and a T42p. IMHO, the T61p is the same category of "great" notebooks. Thinkpads are really the best notebooks I have ever used. I noted no significant difference between IBM and Lenovo Thinkpads.
Jean-Louis L.
Thinkpad A31p - T42p - T61p - TP Tablet

Installation of Patch Set 9.2.0.7 on Windows XP Pro SP2 fails

When I tried to apply patch set 9.2.0.7 to my 9.2.0.5 installation on a computer with MS Windows XP Pro SP2, shortly after the selection of the target Oracle home directory the installer told me to shut down a large number of Windows processes (like RAS, RPC, etc., about 30 in total) that are not related at all to the installation.
Am I getting anything wrong? Or is this a bug (as I would suspect)?
Message was edited by:
csage

You are facing an annoying problem with Oracle installation on Windows.
It seems, some files are locked by
other processes than the Installer process.
The following workaround worked (for me):
Temporarily remove the reference to the Oracle Home at system startup
1. Rename the Oracle Home \bin directory to \bin_save
2. Reboot the system
3. Rename the bin_save directory back to bin again
4. Start patch installation again

Satellite U300 & Windows XP Pro SP2

Hi,
I've installed Windows XP Pro SP2 on U300, I've downloaded all drivers and utilities, everything works fine but I have one device in the Device Manager with Yellow Bang (!) and it's: "PCI Memory Controller".
Where can I get the driver fir it?
Thanks,
Moshe.

Hi Neil,
After doing some research, I found the solution.
U300 contains "Intel Turbo Memory 1GB" (Robson) which use to accelerate
HDD I\O and battery saving, this is actually a hardware card on the PCIe bus.
The problem is that this feature is supported only under Windows Vista... and since
we're using Windows XP all we have to do is just to disable it in the hardware manager.
Regards,
Moshe.

Bug with Access connexions with Windows vista Pro SP2

Similar Messages

Maybe you are looking for