Bug with buttons

I have a simple menu with a video set as background and a psd (one layer only) file for the incrustation (overlay).
I created a button.
The incrustation disappears when I switch between the different button states (opacity and color are set correctly in the button inspector tab)
I get the same problem with a mac pro and snow leopard 10.6.
Is it a bug from DVDSP 4.2.2 or did I miss something?
Thanks.

Hi Josh
Shared with you as "read only". Wonder if its enough?
Worth Mentioning that the personel that reported the bug was using IE9
The process works as follows.
"Person 1" answers the form normally and saves. "Person 2" receives the form by e-mail trought the "E-mail" Box at the top.
"Person 1" Answers "Capa Dura" as "Sim" on first page (green page).
Questions "Revest.", "Hot", "Abertura", "Corte" and "Extras" show up. Answers normally and Save.
Person 2 receives the form and opens it, bug happens. She can't see "Revest.", "Hot", "Abertura", "Corte" and "Extras" unless she answers "Não" (no) on "Capa Dura" and select "Sim" (yes) again.
Same stuff happens on the below field "Caixa Box" same process.

Similar Messages

Interactive Reports - Problem (possible bug) with button template?

Hey all,
I possibly noticed a problem with the use of the button template of the search bar in an interactive report.
When I for example choose 'Button Alternative 1' as Button template and then save my report then it looks perfect.
When I now Export/import my application, I loose the button template of my interactive report, if I open the report attributes it isn't selected anymore.
Does anyone else have this problem?
Apex version: 3.1.2.00.02
Kind regards,
Oli

Oli,
Thanks for bringing this up. One of my beta testers just called to say that two of our IRs weren't showing the Cancel or Apply buttons at all. But the third IR worked fine. In my Alpha version, all three had Buttons as the selected style, so I'm a bit confused what went wrong.
But now I'm thinking if the fact that I had multiple themes defined in the application might have caused the confusion. I didn't deploy the themes from Alpha to Beta because they were all based on Theme 13, and I thought my extensions were included in the application export (which I didn't realize until recently). I'm guessing that if I drop the extraneous themes on Alpha and re-select the button theme, I should be okay when I deploy again?
I just dropped the extra themes in my Beta and the IRs button theme was undefined again, so I'm thinking they were pointing to the wrong "button" style. Hopefully cleaning up in alpha and changing these buttons will resolve this and I won't have deployment problems!
Wish me luck!
Stew

A BUG with Dreamweaver 8 when add flash button

There is a BUG with Dreamweaver 8 Chinese language version.
When I check the button "add flash button",show me a
message"There is an error,when the onChange run in Flash
Button.htm".
How to sovle the problem? Thanks.

Troubleshooting JavaScript errors in Dreamweaver
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"cnlomo" <[email protected]> wrote in
message
news:fk0mas$31l$[email protected]..
> There is a BUG with Dreamweaver 8 Chinese language
version.
> When I check the button "insert flash button",show me a
message"There is
> an
> error,when the onChange run in Flash Button.htm".
> How to sovle the problem? Thanks.
>

Rendering bug with absolutely positioned button tags

I'm using Firefox 10.0.1 and I've found a bug regarding button elements that are absolutely positioned. The problem is setting both the right and left CSS attributes does not affect the width of the button as it should.
Here is some example code to show what I mean (the forum is mangling the html, hopefully you can get the gist of it):<br />
<br />
<pre><nowiki><html>
<body>
<div style="width: 500px; position: relative;">
<button style="position: absolute; left: 0; right: 0;">Test</button>
</div>
</body>
</html></nowiki></pre>
In all other browsers the button will be 500px wide. In Firefox, it will fit to the text.

Why don't you give that button a width:100% if you want it to take the full width of that DIV container?

ICal bug with month view

I primarily use week view on iCal, but sometimes i switch to month view for a larger perspective. Often, i use month view to check for any leftover events from the previous month in case i forgot to delete one or two.
I just found a bug concerning this. If i click on "month" today, it'll take me to the month view for june 2011, and from there i can navigate forwards or backwards. However, may 2011 seems to have a bug. If i click on < from june, it does nothing; if i click again, it takes me to april 2011. Similarly, if i click on > from april it does nothing and if i click again it takes me to june.
It doesn't end there. The june/may thing happens only when the selected day (the one shaded light grey on the month and week views and bright blue on the little month tab on the left) is after 04 june. If a day from the first week of june (i have my weeks start on sunday) is selected, the < button does take me to may, but several events which i deleted a long time ago are showing up.
Now, i have an event set for today (04 june). Since the first four days of june are in the same week as the last three of may, the month view for may shows these four days, as any normal calendar app would.
If i use the month tab to the left to navigate, i can access may 2011 by selecting any day on that month. However, iCal's behaviour depends on which day was selected previously. If the previous day was in april 2011 or earlier, iCal will show the month of may completely empty, which is great because i have no leftover appointments from may; however, the box for 04 june is also empty, which it shouldn't be. If the previous day was in june 2011, it'll show may with a repeating event on every sunday except the first, which is completely absurd, since i have deleted this event (and why isn't it showing on the first sunday in may?); the box for 04 june, however, will correctly show the event i have set for this day. If the previous day was in july 2011 or later, it'll show may with the repeating event on all sundays (including the first one) and it won't show anything on the box for 04 june.
Obviously, there is a bug with may 2011.
In case it helps, i do have a repeating event set to all sundays until the end of existence, but i have deleted all the entries from may and previously, since they have obviously already happened. Also, i had many other repeating events set to happen on different weekdays; these are to repeat themselves weekly until about halfway through june, and they started on april or may (can't remember right now). Like the sunday one, i have deleted all the entries from may because they have already taken place. Strangely (and thankfully), none of these appear when i visit may from june or later, as does the sunday event.
Any help would be greatly appreciated. Or am i forever stuck with week view, which has so far proven to be bug-free?
(I did a search on Google and another on the Apple forums for this issue but could find nothing, so i decided to ask the question myself. I apologise if somebody has already asked this question and i just couldn't find it.)

Greetings,
I have a vague recollection of someone else with this issue but haven't experienced it myself nor encountered it recently.
Troubleshooting:
1.) First make an iCal backup: http://support.apple.com/kb/HT2966.
2.) Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical and / or "ical"
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
__NOTE: Removing these files will remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps!

Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

Error with buttons in an interactive PDF with "go to URL" action applied

Hello, I am having an issue with buttons in an interactive PDF, specifically buttons that have a “go to URL” action applied to them. Most of the buttons in the document work fine and link out correctly however, some of the linked buttons InDesign is adding spaces to the end of the url, which the browser interprets as “%20” and breaks the link i.e. (http://helpx.adobe.com/pdf/indesign_reference.pdf%20). The added space effects multiple buttons in my document seemingly randomly, potential Bug? When the added space is deleted from the URL via the Button and Forms Panel’s URL field it is re-added by InDesign upon deselecting the button. Obviously the links can be updated in acrobat after export, but this is tedious and time consuming. Any help that can be provided would be much appreciated. Thanks!

But I have InDesign documents with sometimes 60-100 buttons in them. Previously I had to do nothing other save out of InDesign as an interactive PDF - perfect, with no editing in Acrobat at all apart from for a couple of document javascripts. It also applies to any interactive element. Buttons that are used for “show/hide” with others to create reveals and builds etc. Buttons that link to other pages within the document.
InDesign allows master page interactive buttons… make once use many times, Acrobat allows individual and painstaking editing of however many pages and buttons there are in the document, sometimes hundreds.
The solution is, until Adobe do a decent job of DC to revert to Pro XI and pretend its never happened.

Adobe? seems there is a bug in buttons behaviour!! (not really air only)

Good morning,
is there a reasonable reason for which a button switches at cursor click from over-state to up-state [for 1 keyframe?] and then to down-state, instead of switching from over-state directly to down-state as supposed?
it is just a button created in CS5, with no code yet.. in a very simple swf.
the bug is evident:
1) in AIR 2.5 for Android (veeeery bad)
@ http://www.androidzoom.com/it/applicazione_android/comunicazioni/mc2labs-realpad_reqm.html
2) testing the swf with ctrl-return from cs5
3) when calling the simple swf directly, without loading it via html (!)
@ http://www.mc2labs.com/next/proc/realpad/realpad_web.swf
using the save swf file in a web page seems flash player is not affected [see 3).. boh]
@ http://www.mc2labs.com/next/proc/realpad
please note:
1) the bug seems to "work" only when a button is contained in a movieclip.
when the same button is placed on the maintimeline it works perfectly
(as shown in the app: the 4 buttons [bottom right] are container in a movieclip placed in the stage. the 5th and upper button is placed on the stage)
2) I didn't try with AIR2.5 for desktop (please..)
nb the affected swf is physically the same for the web and for the android versions of the upcoming app.
gimme light please. (seems to be impossible it is an error from the developer)
my regards,
Massimiliano Carli
mc2labs.com

later some debug, I found this:
buttons on a container MovieClip react slower than buttons on main timeline (all air versions [desktop, android])
seems (and sounds, to say the truth) to be correct the running path: [mouse events:]
OVER -> DOWN [and then] UP -> CLICK
but,
OVER -> DOWN [and then] UP -> CLICK with buttons in main timeline is fast enough
OVER -> DOWN [and then] UP -> CLICK with buttons a MovieCLip is not fast enough to be acceptable
and, in the case:
OVER -> DOWN [and then] UP -> CLICK with buttons a MovieCLip is AIR for Android is terribly SLOW (can't use buttons?!?!)
adobe, have I to open a bug report?
Massimiliano
nb AIR 2.5.1 (I ask to myself if previous versions of AIR were free from this bug, or if worldwide developers are used to not to use buttons in movieclips when developing for AIR...)

Bank DC issue (Bug with ESS 603?)

Hi all,
We are trying to disable the 'Edit' and 'Delete' button in the Bank Overview iView.
As the first step we tried printing some message in the init() and wdDoModify() method of VcPerBankUSOverview of essusbank using IWDMessageManager.After rebuilding and deploying,somehow the messages are not geting printed.
If we try printing in the detail view, its getting printed.But not in the Bizcard view of VcPerBankUSOverview.Am I in the wrong place? Is this bizcard getting created dynamically for Bank Overview screen.
I tried printing messages in Per DC too.
We are in ESS 603.Is this a bug with ESS 603?
Thanks
Kukku

Hi,
to disable the Edit and Delete buttons of the bank overview there are 2 options. Neither of them involves changing a standard component or even any kind of development.
1 - Configure the correct authorizations in ECC system so that the users don't have authorization to modify or delete the data.
2 - Disable the buttons by using the Java Webdynpro Personalization: preview the iView and press CTRL + right mouse button on top of the buttons.

Downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

downloaded 11.0.3 (42) 64 bit to my MacBook Pro and it crashes every time I select a song a use the 'add to' function to add to a play list. It's never done this before, is it a bug with the new version?

You could just disable updates. Change these settings in about:config.
* app.update.auto - set to false
* app.update.enabled - set to false
You can still check for updates with the "Check for Updates" button in the About Firefox window, but it will download the update file anyway if there is an update available. You can also check which is the current release from here:
* http://sjc.mozilla.com/en-US/firefox/new/

IPhone 5 ios 6.1 siri bug with headphone

Hello,
I noticed today that after I updated to IOS 6.1 siri no longer works when I use a headphone and have the phone in my pocket. If I initiate siri using the headphone button, it beeps for me to speak then immediately beeps to indicate siri is no longer active. It works if the phone is out of my pocket. Perhaps there is a bug with the proximitiy sensor that turns off siri? Can anyone confirm this and if so, how can I submit this as a bug to apple?

Same thing happens to me. It's happening because using the headset activates the siri button, then your leg touches the button immediately dismissing or quitting siri. The only solution I know of is to turn the screen of your phone away from your leg while the phone is in your pocket.

AIR bug with iOS fullscreen video! (easy repro)

Here's a bug with fullscreen AIR apps not dealing with iOS fullscreen video resize. Easy repro:
1. Create an mc with a background graphic aligned with the top and bottom of the stage. (This is so you can easily see the bug.)
2. Add a stageWebView and load an html page with embedded video. (or just load a video directly)
3. Play video and enable fullscreen mode.
4. Rotate device 90 degrees while in fullscreen mode and then hit "Done" button to return to stage (exit fullscreen).
5. BUG: Stage is now "pushed down" and off-screen. (even though the mc still traces x = 0)
Conclusion: the display bug occurs when the user exits the iOS native player fullscreen mode from a different orientation then they started with (common if the original aspect ratio was portrait)
Can someone else please confirm this? (The amount of stage "push" appears to corrolate with the height of the iOS status bar.)
Thanks.
PS. You don't necessarily need to load an html page. You can just have stageWebView load a video directly and experience the same result.
PPS. I also tried using the new UIWebView Native Extension and am seeing the same thing, so this is really looking like an AIR/Flash bug with the iOS native player.

A simpler summary for this issue:
If the device has been rotated since entering Fullscreen native player, a fullscreen app will be "pushed downwards" and off-screen slightly.
BUG: Adobe AIR app does not stay in fullscreen mode after such and event, ruining graphic UI for fullscreen apps.
Simple workaround: listen for on orientationChange and if stage.displayState == StageDisplayState.NORMAL, set to stage.displayState = StageDisplayState.FULLSCREEN.
However, iOS native player will lose traditional status bar appearance (and risk rejection by Apple??)
Complex workaround (as mentioned earlier) will keep the native player's status bar but result in the app's screen "flashing" upon resizing the stage.
Please help fix this bug by commenting in my bug report. Thanks again.
https://bugbase.adobe.com/index.cfm?event=bug&id=3486264

Bug with on the go playlist?

I have a nano 2g 8GB. Docs say click and hold the button on a song, album, artist, or playlist to add to the on the go playlist. However, i find that only click and hold on song actually works. I just took the 1.1 nano upgrade and checked again and this is still the case.
Seems like bug to me.

Yes it is a bug with the 8GB nano. It's been well documented here already.
http://discussions.apple.com/thread.jspa?threadID=684528&tstart=50

30EA3: German language bug with user defined reports still not fixed

In 30EA2: Limited folder functionality with German language
I wrote about a bug in 30EA2. Was this message noticed by the developers?
The bug still exists in 30EA3.
In new folders for user definded reports only the options "Kopieren" and "Exportieren" (copy and export) are available, when SQL-Deverloper runs in German language mode.
A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf

I made a new thread for the same bug in 3.1EA2:
3.1EA2 Old bug with German language settings still exists
I have some hope, that my problem finally got noticed by the developers.

3.1EA2 Old bug with German language settings still exists

In the past I wrote several times about a bug in SQL Developer when running in German language mode. This bug is still not fixed in 3.1 EA2:
In new folders for user definded reports only the options "Kopieren" and "Speichern unter ..." ('Copy' and 'Cave as') are available, when SQL-Deverloper runs in German language mode. Other options like "Bearbeiten, Neuer Ordner, Neuer Bericht, Ausschneiden, Einfügen, Löschen" (Edit, New Folder, New Report, Cut, Paste, Delete) are missing. A workaround is to force language to English with the line
AddVMOption -Duser.language=en
in sqldeveloper.conf
I mentioned it first in Re: Folders with limited functionality about version 2.1.1.64 and then in 30EA2: Limited folder functionality with German language 3.0 EA2 and German language bug with user defined reports still not fixed Beta Release 3.0 EA3
Edited by: user1775992 on 22.11.2011 03:30

I have raised a bug on this issue and I am actively looking into it.

Bug with buttons

Similar Messages

Maybe you are looking for