Bug with gcc compiler

I saw the below article and was wondering if this was a problem with arch linux as well or not.  I do not see any thing listed in the advisory section so was not sure about this.
http://blogs.computerworld.com/14583/fixing_linux

Since it says that it's fixed in 2.6.30.5 and the latest version on arch is 2.6.30.5, then it's probably not an issue. (if you are actually using the latest kernel on arch)
[oh@Alice][~]%pacman -Si kernel26
Repository : core
Name : kernel26
Version : 2.6.30.5-1
URL : http://www.kernel.org
Licences : GPL2
Groups : base
Provides : None
Depends On : coreutils kernel26-firmware>=2.6.30 module-init-tools mkinitcpio>=0.5.20
Optional Deps : crda: to set the correct wireless channels of your country
Conflicts With : None
Replaces : kernel24 kernel24-scsi kernel26-scsi alsa-driver ieee80211 hostap-driver26 pwc nforce squashfs unionfs ivtv
zd1211 kvm-modules iwlwifi rt2x00-cvs gspcav1 atl2 wlan-ng26 aufs rt2500
Download Size : 34564.71 K
Installed Size : 133676.00 K
Packager : Thomas Baechler <[email protected]>
Architecture : x86_64
Build Date : Mon 17 Aug 2009 16:19:04 CEST
MD5 Sum : 4add217467ce2add37cc12874ab03ced
Description : The Linux Kernel and modules
Last edited by Mr.Elendig (2009-08-21 16:35:10)

Similar Messages

  • Issue with gcc compiler installation

    Hi ,
    To install the C Compiler(gcc compiler) on Solaris 9.0 ,I unzipped the following tar files SUNW0gccfss.tar.bz2 and gccfss_src.tar.bz2 but after that when I type gcc ,I get that "SUNW0gccfss is not installed".
    Even I used cc command to compile the C Program but I get this error message "language optional software package not installed"
    Please advise.
    Thanks
    Bala

    For Sun Studio tools you can download from http://developers.sun.com/sunstudio/downloads/index.jsp . Note the "cc" is /usr/ucb/cc normal shell script which will pickup the sun studio compiler if its installed. If its not present then it throws the error messaget "language optional software package not installed"
    If you are looking for compiling with GCC. Grab hold of the Solaris Companion CD from http://www.sun.com/software/solaris/freeware/ and install the all the gcc releated . The CD has "installer" script to install all the development packages.

  • Bad performance of PARI when compiling with GCC for SPARC 4.2.0

    Hi,
    I've compiled pari (2.3.3) with gcc 4.2.0 and with an old gcc 3.3.2 on a Sun Fire V240 and Solaris 10.
    The performance of pari compiled with gcc 4.2.0 is terrible. I've tried it with '-O3 -fast' and without this flags with the same result.
    First compiled with gcc 3.3.2 without any special CFLAGS and run make bench:
    * Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
    * Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=80
    * Testing number for gp-sta..TIME=63 for gp-dyn..TIME=62
    * Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
    * Testing linear for gp-sta..TIME=30 for gp-dyn..TIME=29
    * Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=51
    * Testing sumiter for gp-sta..TIME=45 for gp-dyn..TIME=47
    * Testing graph for gp-sta..TIME=25 for gp-dyn..TIME=25
    * Testing program for gp-sta..TIME=94 for gp-dyn..TIME=94
    * Testing trans for gp-sta..TIME=228 for gp-dyn..TIME=225
    * Testing nfields for gp-sta..TIME=434 for gp-dyn..TIME=433
    +++ Total bench for gp-sta is 726
    +++ Total bench for gp-dyn is 722
    Then compiled with gcc 4.2.0 again without any special flags and run make bench:
    * Testing objets for gp-sta..TIME=4 for gp-dyn..TIME=4
    * Testing analyz for gp-sta..TIME=82 for gp-dyn..TIME=83
    * Testing number for gp-sta..TIME=62 for gp-dyn..TIME=65
    * Testing polyser for gp-sta..TIME=19 for gp-dyn..TIME=19
    * Testing linear for gp-sta..BUG [1686975] for gp-dyn..BUG [1608146]
    * Testing elliptic for gp-sta..TIME=50 for gp-dyn..TIME=52
    * Testing sumiter for gp-sta..TIME=51 for gp-dyn..TIME=50
    * Testing graph for gp-sta..TIME=28 for gp-dyn..TIME=28
    * Testing program for gp-sta..TIME=98 for gp-dyn..TIME=97
    * Testing trans for gp-sta..BUG [613000] for gp-dyn..BUG [606558]
    * Testing nfields for gp-sta..BUG [3648091] for gp-dyn..BUG [3716170]
    +++ [BUG] Total bench for gp-sta is 3029987
    +++ [BUG] Total bench for gp-dyn is 2958336
    Do anybody know this problem or can tell me what the problem could be?
    Thanks!!
    Rainer W.

    Here are the compiler options I used to compile it with gcc4.
    C compiler is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
    Executable linker is /usr/local/gcc4/gcc/bin/gcc -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer
    Dynamic Lib linker is /usr/local/gcc4/gcc/bin/gcc -shared -mimpure-text $(CFLAGS) $(DLCFLAGS) -Wl,-G,-h,$(LIBPARI_SONAME)
    If I use the -fast option I get the same result may be a little bit worse.
    Here are some compilation lines:
    Making gp in Osolaris-sparcv9
    make[2]: Entering directory `/no_backup/pari/pari-2.3.3/Osolaris-sparcv9'
    File ../src/funclist not changed.
    ../config/genkernel ../src/kernel/sparcv8_micro/asm0-common.h ../src/kernel/sparcv8_micro/asm0.h > parilvl0.h
    cat ../src/kernel/none/tune.h ../src/kernel/none/int.h ../src/kernel/none/level1.h > parilvl1.h
    cat parilvl0.h parilvl1.h > pariinl.h
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp.o ../src/gp/gp.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/graph -o gp_init.o ../src/gp/gp_init.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I../src/language -I/usr/local/include -o gp_rl.o ../src/gp/gp_rl.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -DDL_DFLT_NAME=NULL -o highlvl.o ../src/gp/highlvl.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o whatnow.o ../src/gp/whatnow.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -I/usr/openwin/include -o plotX.o ../src/graph/plotX.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o anal.o ../src/language/anal.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o compat.o ../src/language/compat.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o default.o ../src/language/default.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o errmsg.o ../src/language/errmsg.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o es.o ../src/language/es.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o init.o ../src/language/init.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o intnum.o ../src/language/intnum.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o members.o ../src/language/members.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o sumiter.o ../src/language/sumiter.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o aprcl.o ../src/modules/aprcl.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elldata.o ../src/modules/elldata.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o elliptic.o ../src/modules/elliptic.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o galois.o ../src/modules/galois.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o groupid.o ../src/modules/groupid.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o kummer.o ../src/modules/kummer.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o mpqs.o ../src/modules/mpqs.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o nffactor.o ../src/modules/nffactor.c
    /usr/local/gcc4/gcc/bin/gcc -c -O3 -Wall -fno-strict-aliasing -fomit-frame-pointer -I. -I../src/headers -o part.o ../src/modules/part.c

  • Kdegraphics-3.2.2 needs a patch to compile with gcc-3.4

    Hi,
    I've tried to compile kdegraphics-3.2.2 with gcc-3.4 without succes, even after changing things in the PKGBUILD file. Just before I gave up I found this patch :-)
    Patch can be found here:
    http://bugs.gentoo.org/show_bug.cgi?id=48596
    I've downloaded the attachment and renamed it to 'v3.2.2-with-gcc-3.4.patch'.
    Just add the following line in PKGBUILD after 'cd $startdir/src/$pkgname-$pkgver'
    patch -p3 < ${startdir}/v3.2.2-with-gcc-3.4.patch

    make it an bug report

  • [solved] unable to compile mame with gcc 4.7.2

    I tried to compile mame :
    http://mamedev.org/downloader.php?file= … e0147s.zip
    but it doesn't work, it fails with gcc 4.7.2 :
    Compiling src/emu/cpu/tms32051/tms32051.c...
    Generating TMS57002 source file...
    obj/sdl/build/tmsmake src/emu/cpu/tms57002/tmsinstr.lst obj/sdl/emu/cpu/tms57002/tms57002.inc
    Compiling src/emu/cpu/tms57002/tms57002.c...
    {entrée standard}: Messages de l'assembleur:
    {entrée standard}:3066: Avertissement: fin du fichier n'est pas à la fin de la ligne; nouvelle ligne insérée
    {entrée standard}: Erreur: ouverture CFI à la fin du fichier; directive .cfi_endproc manquante
    gcc: erreur interne du compilateur: Processus arrêté (program cc1plus)
    Veuillez soumettre un rapport complet d'anomalies,
    avec le source pré-traité si nécessaire.
    Consultez <https://bugs.archlinux.org/> pour plus de détail.
    make: *** [obj/sdl/emu/cpu/tms57002/tms57002.o] Erreur 4
    I want to know how the official packager ( Sergej Pupykin ) succeeded to compile mame ? ( sdlmame package ) :
    https://www.archlinux.org/packages/comm … 6/sdlmame/
    Do I need an older version of gcc ?
    Last edited by Potomac (2012-12-21 20:07:28)

    I found a solution by installing an older version of gcc ( 4.4.5 ) and I can compile now mame,
    it's a known problem about gcc and mame, the source code is not compatible with gcc 4.7.2 ( and even with some older releases ) :
    http://forums.gentoo.org/viewtopic-t-84 … 0473b82412
    check the first comment here ( padremayi ), same error :
    https://aur.archlinux.org/packages/sdlm … setlang=fr
    the solution is to use gcc 4.4.5 version,
    you need also to patch one file in gcc 4.4.5 :
    --- gcc/config/i386/linux-unwind.h 2009-04-10 01:23:07.000000000 +0200
    +++ gcc/config/i386/linux-unwind.h 2012-12-21 03:10:27.000000000 +0100
    @@ -133,9 +133,9 @@
    struct rt_sigframe {
    int sig;
    - struct siginfo *pinfo;
    + siginfo_t *pinfo;
    void *puc;
    - struct siginfo info;
    + siginfo_t info;
    struct ucontext uc;
    } *rt_ = context->cfa;
    /* The void * cast is necessary to avoid an aliasing warning.
    edit : the solution was to increase ram memory in virtualbox, with gcc 4.7.2 and 1.5 Gb ram I can compile mame without errors, but with 1 Gb ram the error occurs
    maybe it's a bug in gcc 4.7.2 ( because with gcc 4.4.5 I don't need to increase ram )
    Last edited by Potomac (2012-12-25 12:09:52)

  • Help!Apache compiling with gcc in Solaris 10

    Greetings
    I am having problems with Apache 1.3.
    When I am running the script ./src/Configure my output is:
    #./Configure
    Using config file: Configuration
    Creating Makefile
    + configured for Solaris 2100 platform
    + setting C pre-processor to gcc -E
    + using "tr [a-z] [A-Z]" to uppercase
    + checking for system header files
    + adding selected modules
    ./helpers/TestCompile: make: not found
    + using builtin Expat
    ./Configure: make: not found
    + checking sizeof various data types
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    ./helpers/TestCompile: make: not found
    + doing sanity check on compiler and options
    ./helpers/TestCompile: make: not found
    ** A test compilation with your Makefile configuration
    ** failed. The below error output from the compilation
    ** test will give you an idea what is failing. Note that
    ** Apache requires an ANSI C Compiler, such as gcc.
    ======== Error Output for sanity check ========
    ./helpers/TestCompile: make: not found
    ============= End of Error Report =============
    Aborting!
    I am root, my PATH is
    /usr/bin:/usr/ucb:/etc:/usr/local/bin:/opt/netscape:/usr/css/bin/:/bin:/usr/openwin/bin:/usr/sbin:/
    I am missing something stupid, I know but I can't find it!!!!Help please I am a newbie.
    I am curious. Has anyone been able to compile succesfully apache server with gcc in Solaris 10?
    Thanks,

    Thanks,
    It was only that.!!!
    But now I have the following problem, I can't create executables when I type make. The output is:
    when I am in the src/folder
    #make
    ===> regex
    <=== regex
    ===> os/unix
    gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
    In file included from /usr/include/sys/wait.h:24,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:292: error: parse error before '}' token
    /usr/include/sys/siginfo.h:294: error: parse error before '}' token
    /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
    /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
    /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
    /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
    /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
    /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
    /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
    /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
    /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
    /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
    /usr/include/sys/siginfo.h:426: error: parse error before '}' token
    /usr/include/sys/siginfo.h:428: error: parse error before '}' token
    /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
    /usr/include/sys/siginfo.h:437: error: parse error before '}' token
    In file included from /usr/include/sys/procset.h:24,
    from /usr/include/sys/wait.h:25,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1096,
    from os.c:21:
    /usr/include/signal.h:111: error: parse error before "siginfo_t"
    /usr/include/signal.h:113: error: parse error before "siginfo_t"
    *** Error code 1
    make: Fatal error: Command failed for target `os.o'
    Current working directory /web-download/apache_1.3.33/src/os/unix
    *** Error code 1
    The following command caused the error:
    for i in regex os/unix ap main lib modules; do \
    echo "===> $i"; \
    case ".Solaris 2100" in \
    .OS390 | .TPF) ( cd $i && make SDP='' OPTIM='') || exit 1;; \
    *) ( cd $i && make SDP='' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
    esac; \
    echo "<=== $i"; \
    done
    make: Fatal error: Command failed for target `subdirs'
    but when I am typing one step up is.
    ===> src
    ===> src/regex
    <=== src/regex
    ===> src/os/unix
    gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED os.c
    In file included from /usr/include/sys/wait.h:24,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:292: error: parse error before '}' token
    /usr/include/sys/siginfo.h:294: error: parse error before '}' token
    /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
    /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
    /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
    /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
    /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
    /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
    /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
    /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
    /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
    /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
    /usr/include/sys/siginfo.h:426: error: parse error before '}' token
    /usr/include/sys/siginfo.h:428: error: parse error before '}' token
    /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
    /usr/include/sys/siginfo.h:437: error: parse error before '}' token
    In file included from /usr/include/sys/procset.h:24,
    from /usr/include/sys/wait.h:25,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1096,
    from os.c:21:
    /usr/include/signal.h:111: error: parse error before "siginfo_t"
    /usr/include/signal.h:113: error: parse error before "siginfo_t"
    *** Error code 1
    make: Fatal error: Command failed for target `os.o'
    Current working directory /web-download/apache_1.3.33/src/os/unix
    *** Error code 1
    The following command caused the error:
    for i in regex os/unix ap main lib modules; do \
    echo "===> src/$i"; \
    case ".Solaris 2100" in \
    .OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
    *) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED ' RANLIB='ranlib' OPTIM='') || exit 1;; \
    esac; \
    echo "<=== src/$i"; \
    done
    make: Fatal error: Command failed for target `subdirs'
    Current working directory /web-download/apache_1.3.33/src
    *** Error code 1
    The following command caused the error:
    case "xi86pc-sun-solaris2.2100" in \
    x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
    esac; \
    cd ./src; make SDP=src/ all
    make: Fatal error: Command failed for target `build-std'
    Current working directory /web-download/apache_1.3.33
    *** Error code 1
    The following command caused the error:
    make -f ./Makefile root= build-std
    make: Fatal error: Command failed for target `build'
    I am newbie with Solaris and gcc so I have no so much idea what is missing there.
    Thanks,
    Juan

  • How to compile DNG SDK with GCC?

    I tried to compile DNG SDK with GCC, but I got stuck to the following error message:
    ... dng_flags.h:33:28: error: RawEnvironment.h: No such file or directory ...
    In other words, it seems that file 'RawEnvironment.h' is missing. I cannot find this file from DNG SDK or XMP SDK. Do you know where I could find this file or do you know how to compile DNG SDK with GCC?
    Regards Sami

    Please define either qMacOS or qWinOS (i.e., in your list of preprocessor defines). As you can see in line 32 of dng_flags.h this is required.

  • Compiling Apache 1.3 with gcc

    Hi all,
    I have trying to set up Apache server in Soalris 10, and to compile with gcc but I am having problems.
    The first part of ./configure --prefix=... is fine, but when I type make I am getting this:
    # make
    ===> src
    ===> src/regex
    <=== src/regex
    ===> src/os/unix
    gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED `../../apaci` os.c
    In file included from /usr/include/sys/wait.h:24,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:292: error: parse error before '}' token
    /usr/include/sys/siginfo.h:294: error: parse error before '}' token
    /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
    /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
    /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
    /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
    /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
    /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
    /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
    /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
    /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
    /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
    /usr/include/sys/siginfo.h:426: error: parse error before '}' token
    /usr/include/sys/siginfo.h:428: error: parse error before '}' token
    /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
    /usr/include/sys/siginfo.h:437: error: parse error before '}' token
    In file included from /usr/include/sys/procset.h:24,
    from /usr/include/sys/wait.h:25,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1096,
    from os.c:21:
    /usr/include/signal.h:111: error: parse error before "siginfo_t"
    /usr/include/signal.h:113: error: parse error before "siginfo_t"
    *** Error code 1
    make: Fatal error: Command failed for target `os.o'
    Current working directory /web-download/apache_1.3.33/src/os/unix
    *** Error code 1
    The following command caused the error:
    for i in regex os/unix ap main lib modules; do \
    echo "===> src/$i"; \
    case ".Solaris 2100" in \
    .OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
    *) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED `./apaci`' RANLIB='ranlib' OPTIM='') || exit 1;; \
    esac; \
    echo "<=== src/$i"; \
    done
    make: Fatal error: Command failed for target `subdirs'
    Current working directory /web-download/apache_1.3.33/src
    *** Error code 1
    The following command caused the error:
    case "xi86pc-sun-solaris2.2100" in \
    x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
    esac; \
    cd ./src; make SDP=src/ all
    make: Fatal error: Command failed for target `build-std'
    Current working directory /web-download/apache_1.3.33
    *** Error code 1
    The following command caused the error:
    make -f ./Makefile root= build-std
    make: Fatal error: Command failed for target `build'
    # svcadm
    Usage: svcadm [-v] enable [-rt] {FMRI | pattern}...
    svcadm [-v] disable [-t] {FMRI | pattern}...
    svcadm [-v] restart {FMRI | pattern}...
    svcadm [-v] refresh {FMRI | pattern}...
    svcadm [-v] mark [-It] {degraded | maintenance} {FMRI | pattern}...
    svcadm [-v] clear {FMRI | pattern}...
    svcadm [-v] delegate restarter_FMRI {FMRI | pattern}...
    svcadm [-v] milestone [-d] milestone_FMRI
    # svcadm -v
    Usage: svcadm [-v] enable [-rt] {FMRI | pattern}...
    svcadm [-v] disable [-t] {FMRI | pattern}...
    svcadm [-v] restart {FMRI | pattern}...
    svcadm [-v] refresh {FMRI | pattern}...
    svcadm [-v] mark [-It] {degraded | maintenance} {FMRI | pattern}...
    svcadm [-v] clear {FMRI | pattern}...
    svcadm [-v] delegate restarter_FMRI {FMRI | pattern}...
    svcadm [-v] milestone [-d] milestone_FMRI
    # make
    ===> src
    ===> src/regex
    <=== src/regex
    ===> src/os/unix
    gcc -c -I../../os/unix -I../../include -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I../../lib/expat-lite -DNO_DL_NEEDED `../../apaci` os.c
    In file included from /usr/include/sys/wait.h:24,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:292: error: parse error before '}' token
    /usr/include/sys/siginfo.h:294: error: parse error before '}' token
    /usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
    /usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
    /usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
    /usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
    /usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
    /usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
    /usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
    /usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
    /usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
    /usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
    /usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
    /usr/include/sys/siginfo.h:426: error: parse error before '}' token
    /usr/include/sys/siginfo.h:428: error: parse error before '}' token
    /usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
    /usr/include/sys/siginfo.h:437: error: parse error before '}' token
    In file included from /usr/include/sys/procset.h:24,
    from /usr/include/sys/wait.h:25,
    from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1079,
    from os.c:21:
    /usr/include/sys/wait.h:86: error: parse error before "siginfo_t"
    In file included from ../../include/ap_config.h:1096,
    from os.c:21:
    /usr/include/signal.h:111: error: parse error before "siginfo_t"
    /usr/include/signal.h:113: error: parse error before "siginfo_t"
    *** Error code 1
    make: Fatal error: Command failed for target `os.o'
    Current working directory /web-download/apache_1.3.33/src/os/unix
    *** Error code 1
    The following command caused the error:
    for i in regex os/unix ap main lib modules; do \
    echo "===> src/$i"; \
    case ".Solaris 2100" in \
    .OS390 | .TPF) ( cd $i && make SDP='src/' OPTIM='') || exit 1;; \
    *) ( cd $i && make SDP='src/' CC='gcc' AUX_CFLAGS=' -DSOLARIS2=2100 -DUSE_HSREGEX -DUSE_EXPAT -I./lib/expat-lite -DNO_DL_NEEDED `./apaci`' RANLIB='ranlib' OPTIM='') || exit 1;; \
    esac; \
    echo "<=== src/$i"; \
    done
    make: Fatal error: Command failed for target `subdirs'
    Current working directory /web-download/apache_1.3.33/src
    *** Error code 1
    The following command caused the error:
    case "xi86pc-sun-solaris2.2100" in \
    x*390*) C89STEPS="0xffffffff"; export C89STEPS;; \
    esac; \
    cd ./src; make SDP=src/ all
    make: Fatal error: Command failed for target `build-std'
    Current working directory /web-download/apache_1.3.33
    *** Error code 1
    The following command caused the error:
    make -f ./Makefile root= build-std
    make: Fatal error: Command failed for target `build'
    And I have no idea what is the problem. Has anyone experience the same?
    I am newbie so...
    Thanks,
    Juan

    Compiling Apache 1.3 with gcc on linux or unix? If you are using unix, I would be compiling with cc and not gcc. You have gcc set to compile using regular expressions and I believe that has to be specified during SunOS install as posix compliant.

  • OCCI compilation issue with gcc-3.2.3 on Red Hat ES 2.1

    Hello,
    If I use OCCI of Oracle 10g and try to compile it with gcc-3.2.3 on Red Hat ES 2.1, I get linking errors.
    The same works if I try to compile OCCI on Red Hat ES 3.0.
    Any clues about how to compile the OCCI on RedHat ES/AS 2.1?

    Yes, I downloaded the OCCI for gcc-3.2.3.
    As I said it works on Red Hat 3.0.
    I want to compile it on Red Hat ES 2.1.
    I have installed gcc-3.2.3 on Red Hat ES 2.1. But the occi compilation wont succeed onto it.

  • Compiling with GCC/makefile : apparent link edition fail

    Hello all Apple developers ,
    I have a slight GCC compiling issue (actually, a makefile one) : it says it can't find the header files for the standard llibraries, stdio and stdlib. What's up with that ? What am I missing to get it working ? I know I had to plaay around with the system a bit to get makefile anyway, but it should work ... Thanks in advance for your help !

    Alright that did work for what I intended it to do - i.e. have gcc and make available in /usr/bin and functionning correctly. Now Xcode in itself however ... crashes everytime upon opening. Not that I need it now, but I certainly will someday - and not in that long a time, in all probability. It says it could not load the iPhone emulator plugin - and it is just the last of many errors, it says. Check Xcode's crash details out here. Thanks a lot already though !

  • Problems with GCC version - compiling OpenOffice

    I am trying to compile OpenOffice 4.1.1 to run on 10.6.8. When I run the ./configure it runs for a few seconds then shows the following error:
    "checking the GNU gcc compiler version... configure: error: found version "1.0.2", use version 3+ of the gcc compiler"
    If I run:
    gcc -v
    I get:
    gcc version 4.2.1 (Apple Inc. build 5659)
    Any ideas on how to fix this?
    Thanks

    I suppose the real incentive is to be able to just continue using 10.6. But it seems from other feedback that the problem with OpenOffice 4.1 is dependencies on libraries in 10.7, rather than the GCC version. I know that I could probably eventually code around those dependencies, but it would certainly involve more time and effort than I am currently able to devote to it.
    I have tried LibreOffice in the past, but frankly I found it so horrible and slow (I think because of its dependency on Java) that I ended up using the X11 version of OpenOffice - which in itself was not a terrific user experience, but was a lot better than the alternative.
    I will try the version you have mentioned, but I also note that this is planned to be obsolete by May next year, and is also the last version that will support 10.6 or 10.7 (10.8 will be the lowest requirement). Which will leave a fair number of 64-bit intel machines unsupported, since some of those are only able to run 10.7. Thanks for the feedback.

  • How to compile .so with gcc?

    I want to make a .so file (library for linux). How could I compile with gcc to have this output. My input file is in .c.
    Thanx

    gcc -I/$JAVA_HOME/include -I/$JAVA_HOME/include/linux -shared myCfile.c -o libMYLIB.so
    //Anders ;-D

  • Programming in C compiling with gcc

    Hi there,
    I've been working on this for a few days but can't seem to figure it out. I am taking an intro to programming class in which we are supposed to write command line C programs, to be compiled with gcc and tested on Linux's, specifically using Kate.
    I have installed Xcode and the Command Line Tools and have checked in xcode preferences and confirmed the install of command line tools worked. For some reason my "developer" folder is not where it should be, in usr.
    I know that v4 of Xcode works differently in this way but I am confused as to what this means for me and trying to write in C on my mac!
    Thanks everyone

    Xcode is a plain old OS X application now.
    There is no developer folder.

  • Debugging servers with gdb and compiled with gcc

    I have trouble debugging my servers on Solaris.
    Setup: Solaris 8 (2.8?)
    [user@ ~]$ gcc -v
    Reading specs from /usr/local/lib/gcc-lib/sparc-sun-solaris2.8/3.2.3/specs
    Configured with: ../configure disable-nls with-as=/usr/ccs/bin/as --with-
    ld=/usr/ccs/bin/ld
    Thread model: posix
    gcc version 3.2.3
    [ ~]$ gdb -v
    GNU gdb 5.0
    Copyright 2000 Free Software Foundation, Inc.
    GDB is free software, covered by the GNU General Public License, and you are
    welcome to change it and/or distribute copies of it under certain conditions.
    Type "show copying" to see the conditions.
    There is absolutely no warranty for GDB. Type "show warranty" for details.
    This GDB was configured as "sparc-sun-solaris2.8".
    I can run the server, debug and step through the code, inspecting variables. But when i
    type "cont" to continue and let the server finish, what heppens is:
    The server finishes (bec i get my result back to the client)
    GDB hangs saying "Continue" and i wont get the GDB-promt back.
    I have to kill the gdb from the unixprompt
    Question: Has anyone tried to run and debug tuxedo servers using gcc and gdb?
    any input is of value even if someone has had success on linux with gcc and gdb.
    My guess is that it has to do with the threading of gdb and tuxedo that will not match.
    Mats Gårdstad Friberg
    Datarutin AB Sweden

    options=('debug' 'staticlibs')
    these are the options i have set in the PKGBUILD, i might try giving CFLAGS directly, but compiling libc on this old dualcore takes quite a bit of time unfortunately

  • How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?

    How compile OCCI Demo of Oracle 9i with gcc on Redhat Linux 9?
    When I use gcc-3.22 compile,error:undefined reference to 'typeinfo for oracle:occi:SQLException'.
    Reputedly gcc-2.95 or gcc-2.96 is the official supported version , did you try it?
    Can you help me compile it successfully?
    Thank you!
    Alex Clark

    For details
    compile cmd:make -f demo_rdbms.mk occipool
    compile result:
    make -f /opt/oracle/product/9.2.0/rdbms/demo/demo_rdbms.mk buildocci
    EXE=occipoo
    l OBJS=occipool.o
    make[1]: Entering directory `/opt/oracle/product/9.2.0/rdbms/demo'
    /usr/bin/g++ -L/opt/oracle/product/9.2.0/lib/
    -L/opt/oracle/product/9.2.0/rdbms/
    lib/ -o occipool occipool.o -locci -lclntsh `cat
    /opt/oracle/product/9.2.0/lib
    /sysliblist` -ldl -lm
    occipool.o(.gcc_except_table+0xe8): undefined reference to `typeinfo for
    oracle:
    :occi::SQLException'
    occipool.o(.gnu.linkonce.t._ZN8occipoolC1Ev+0x18): In function
    `occipool::occipo
    ol[in-charge]()':
    : undefined reference to
    `oracle::occi::Environment::createEnvironment(oracle::o
    cci::Environment::Mode, void*, void* (*)(void*, unsigned), void* (*)(void*,
    void
    *, unsigned), void (*)(void*, void*))'
    occipool.o(.gnu.linkonce.t._ZN8occipoolD1Ev+0xf): In function
    `occipool::~occipo
    ol [in-charge]()':
    : undefined reference to
    `oracle::occi::Environment::terminateEnvironment(oracle
    ::occi::Environment*)'
    occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x355): In function
    `occipool::
    select()':
    : undefined reference to
    `oracle::occi::SQLException::SQLException[in-charge](or
    acle::occi::SQLException const&)'
    occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x395): In function
    `occipool::
    select()':
    : undefined reference to `oracle::occi::SQLException::getErrorCode() const'
    occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x3db): In function
    `occipool::
    select()':
    : undefined reference to `oracle::occi::SQLException::getMessage() const'
    occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x44f): In function
    `occipool::
    select()':
    : undefined reference to `oracle::occi::SQLException::~SQLException
    [in-charge]()'
    occipool.o(.gnu.linkonce.t._ZN8occipool6selectEv+0x466): In function
    `occipool::
    select()':
    : undefined reference to `oracle::occi::SQLException::~SQLException
    [in-charge]()'
    collect2: ld returned 1 exit status
    make[1]: *** [buildocci] Error 1
    make[1]: Leaving directory `/opt/oracle/product/9.2.0/rdbms/demo'
    make: *** [occipool] Error 2

Maybe you are looking for

  • Single Sign On - SAPSSOEXT - Can't find Dependant Libraries

    HI   I am trying to implrement SSO to another server running in IBM Websphere 5.1 In my java code System.LoadLibrary fails for SAPSSOEXT and error message is "Can't find Dependant Libraries" concerned java code is public static String SSO2TICKETLIBRA

  • How to create and implement a new work schedule rule successfully?

    Dear Community, How to create and implement a new work schedule rule successfully? In other words, what are all the basic steps to create and implement a new work schedule rule successfully? Thanks in advance.

  • I can't activate face time & iMessages on my iPad mini ?

    I've bought a new iPad mini . And when I try to activate face time & iMessages , with my apple id  I get this message " the Username or password was incorrect Try again "  knowing I'm sure that e-mail and password are correct , I use them every day t

  • Can the IMAQ 1424 be configured for other digital cameras?

    I hope the answer is yes! Because when I read: �Compatible with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras� I didn�t take that to mean �ONLY COMPATIBLE with Cohu, Dalsa, Hamamatsu, Kodak, and Pulnix cameras� That is to say I was operating unde

  • BO4 Crystal Client Login Issues

    Hi Experts, We have recently installed BO4.0 and are using Crystal CE / 2011, and the installation went smooth [both for client and server]. What happens is when we connect to our BO server for development purpose using Crystal Client Application it