Bug with Mac OS X 10.5.3

Hello,
Sorry for my english but I'm french.
So,
When my computer is standed by during many hours, if I want launch Monitor, the process PmTool take 100% of my processor...
After launch and close Monitor, my system is "a big bug". All is slow, and I think that pmtool is running back.
Why ?

You do need a driver, and that's a driver for your "cable" (which really is a midi interface), not for your keyboard.
Try this:
http://www.yamaha-europe.com/yamahaeurope/download/products/30_computer_related_products/Drivers_Utilities/Drivers/ USB_Driver/USB_Driver_for_MAC_OSX_Ver__1_11.zip
You might have a driver already, since GB seems to recognize it. So make sure that
• You are recording to a software instrument track in GB
• You have the "midi out" of your keyboard connected to the "midi in" of the interface cable.

Similar Messages

Filevault bug with Mac Intel & bootcamp

Hello,
I try to use filevault on my Mac Intel with bootcamp, during the process I get an alert: I don't have enough space to us it, the message said I would require 4064,0 Gb... my hardrive's size is 250 Gb ! (I have the screenshot). So I try the same process on MacBook with the same personal document folder it works. I reinstall my MacBook with a fresh install of MacOS X and then setup bootcamp. afterward I try fileVault and it didn't works...
Does somone know this bug ? is there a fix ?
Thanks
HDR

I have the same problem on a MBP, the same error message, but I do not have bootcamp installed on my mac… so it may not have anything to do with that app you are using.
Cheers
tschotsch

Graphic bugs with Mac os x

I installed Labview 8.5 Student on my Mac but i get this bugs when displaying the properties of elements:
I tested Labview 8.5 on my Macbook Pro (10.5) and on my imac (10.4) - same results.
Anyone here has some advice for me?
Attachments:
Fehler2.jpg ‏69 KB

There is no work around that I know of at this time. I will look into it and post what I find. This bug will likely be fixed in a future release of LabVIEW, but I cannot guarantee this will ne addressed in the 8.5.1 release.
Mark
LabVIEW R&D

I am using a mac mini (10.8.3) with Mac Mail 6.3 (1503). Whenever I try to forward an email with attachments, the attachments do not make it. They show being sent, but the attachments never are sent.

Hey Guys,
The title says it all. Whenever I receive an email with attachments, I will try to forward the email to someone with the attachments. Mac Mail shows that the attachments are attached, but the receiver says the attachments are not there. Our mail host is Rackspace. We are setup with IMAP. It should be noted that we are experiencing similar issues with OS 10.5.8 with Mac Mail 3.6 (936).
We assumed Rackspace was the problem, so we logged into their webmail portal and tested it and the attachments were received as normal, which points everything back to Mac Mail. We even had an ISP change but the problem do not change.
I have researched the problem, and there seems to be evidence of this being a known bug with Mac Mail, but I am hoping there is a workaround. The company is unwilling to move to a different mail client since they use Daylite 4, which does not support Thunderbird.

Back up all data.
1. Triple-click the line below to select it:
~/Library/Mail/Bundles
Right-click or control-click the highlighted line and select
Services ▹ Open
from the contextual menu. A folder may open, or you may get an error message that the item can't be found. Either result is normal. If the folder does open and has contents, move the contents to the Desktop. Relaunch Mail and test. If there's no change, put the contents of the folder back and quit Mail again.
2. Repeat with this line:
/Library/Mail/Bundles
This time you may be prompted for your login password when you remove the items. Make sure they're removed from the folder and not just copied to the Desktop. If necessary, copy them first and then move the originals to the Trash.

Seekbar bug with firefox browser on Mac

hi.
i found a bug in seekbar using Mac with mozilla firefox (but not with safari who works fine and also windows pc with IE and mozilla work fine).
i tried to visit www.opensourcemediaframework.com and to drag the seekbar and with the mouse clicked i exit from the flash stage where the video is playing.
i release the mouse but the seekbar dont't receive the mouse released event (and the stop drag) and if i try to move the mouse (not clicked) into the video area the seekbar continue to follow the mouse.
thanks a lot.

hi.
only with mozilla on Mac, i have this:
page: http://www.opensourcemediaframework.com/
1. click whith button left of the mouse the thumb (the arrow) of the seekbar (button left clicked)
2. the player go to pause and i start to drag (button left clicked)
3. i move right the mouse (the thumb follow the mouse and video is paused - correct) (button left clicked)
4. i move down the mouse outside the stage of the video (button left clicked)
5. i release the mouse (unclick the button left): the video don't start because dont't receive the stop drag event
6. i move the mouse on the stage area of the video and the thumb of seekbar follow the mouse (continue the drag but the button left is not clicked)
7. so, i have to click on the thumb to stop the drag and the video go to play.
i don't receive any error message, it's only a not so correct behavior of seekbar drag.
With Windows IE and mozilla works fine, also with Mac Safari.
The problem is only (i think) for Mac platform with mozilla.
Thanks.
flavio

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

Will Office 2004 work with Mac OS 10.4.11?

I'm currently running Office 2004 with Mac OS 10.4.2 but will soon be upgrading to Mac OS 10.4.11. I'm wondering if the Office currently installed on my computer will work with OS 10.4.11.
(All the component apps of Office are marked as Version 11.2, except Entourage, which is marked as Version 11.2.1.)
I'd appreciate any thoughts. THANK YOU.
-Bob

Shouldn't be any problem. I used Office 2004 with 10.4.11 for quite a while until I bought Office 2008.
You might want to update your Office apps, though, with the latest security updates and bug fixes. My Office 2004 apps are all 11.3.something versions.
charlie

Blocking bug with 10.8.3+Adobe Lightroom+Canon iPF5000 (but workaround found)

Hi all,
since I have updated my MacBook Pro (early 2011 model) with 10.8.3, I have a blocking bug with Adobe Lightroom (either 4.3 or 4.4) for launching prints on my Canon iPF5000 (firmware 1.33, either MacOS driver 2.67 or 3.06, connection through USB).
When I was under 10.8.2 with the Canon's driver 3.06, everything works fine.
Basically, after clicking Print a Copy or Print... in Lightroom, the file spooled to the driver stays in MacOS printer queue. Within the printer queue window, the printer is in pause mode, and each time I try to resume the printing processing, the driver put it on hold immediately. When I look into the history on the Console, the driver complains about an unknown error... The data stay within the driver, as my Canon iPF5000 "Data" led indicator stays unlit.
My print settings are 600dpi or 300dpi, print sharpening Standard/Glossy, 16 bit output. And Color managed by printer (because I let the Canon driver managing my B&W prints).
Strangely enough, when I launch a print from Preview application, the drivers does its job and sends it successfully to my Canon iPF5000...
As this was driving me crazy, I have tried a clean install of MacOS 10.8.3 (as 10.8.2 is no more available from Apple servers...). No success, same blocking issue.
Eventually, I've found the workaround: using the imagePROGRAF Advanced Preview. You have to click on "Print..." in Lightroom in order to see the driver settings window, and then check the "Preview before printing" option in the main tab of the driver settings. Then I can preview my Lightroom printing work and then launch successfully my printing.
Simple workaround, but very strange bug...
For me, the root cause could be multiple and not very obvious.
Is it Mac OS 10.8.3 ? But why can I make prints from Preview application for instance, and not from LR ?
Is it the Canon driver ? But this lead me to the same question.
Is it Lightroom ? Does it send corrupted data that make the driver crazy but not the imagePROGRAF Advanced Preview ?
So, if any user of Canon iPF5000 + Mac OS 10.8 + Lightroom is around, please share your experience.
And if any Apple, Adobe or Canon engineer read this, please try to fix this.
Happy printing,
Amaury

It's different how applications write print data. If you use Advanced Preview from the driver then it calculates already the output which afterwards is only sent to the printer.
Have you once tried to print with fast graphic process switched off (option of advanced settings)?
Hope it helps
Renate

Authentication problem - solved, but maybe a bug in Mac OS X?

Hi,
I've a rather small installation with only a handful of users configured on a Mac mini (Mac OS X Server, 10.6.8). All of them use the mail, calendar and addressbook server on the Mac, nothing more. They use it with Mac, iPhone and iPad. Everything worked fine for months but suddenly all of them were faced authentication problems: it was not possible to login on the imap server, the calendar server, the addressbook server. It was possible to login using the admin account on the server directly. Moreover, all users disappeared from the workgroup manager, however they still were available on the servers LDAP server and findable using ldapsearch.
First, I used to completely restart the server to solve the problem, but it reappeared after only few hours again.
Second, after understanding more about the authentication process, I found the "killall DirectoryService" was sufficient to solve the problem, but it still reappeared after few hours.
Then I found the, once the problem occured, there was nearly no more communication to the local LDAP server on port 389 on localhost. When everything was working fine, the was a lot of such communication, including queries for usernames, when a login attempt was made. I started a "tcpdump -n -i lo0 port 389" and waited for the problem again. After the problem occured, I found in the pcap files that there were a few final query attempts, actually attempts the open a port 389 TCP connection to the slapd running on localhost, which were answered with a TCP RST. Then, no more attempts were made until l restarted the DirectoryService. Using the logfile of the slapd I found that this happened exactly at the time the slapd was stopped and restarted. And - surprisingly for me - stopping and restarting the slapd happened exactly once an hour.
I then found that it happened exactly at the time the time machine backup process was started and indeed it was possible to trigger the event of restarting the slapd by manually starting a time machine backup.
(Indeed, I switched my backup strategy from SuperDuper to time machine the other day and maybe that was the time the problem occured for the first time. I know that time machine is not considered as the best backup strategy for a server but I wanted to try on my own.)
Google helped my to find a hint that time machine will actually stop and restart slapd - which is a generally a good idea, since otherwise a backup from some open database files would be made, which could work but may fail. So, I thing, someone of the developers thought about that problem too and has considered time machine for backups of a server.
However, a not running slapd can not answer queries from a DirectoryService and a stopping or starting process might indeed end up with TCP SYNs answered with TCP RST.
My solution was to disable time machine again and from that time the problem does not occur again.
I'm wondering why the DirectoryService process isn't starting to query the slapd again after a failed connection. Isn't this a bug? After this experience I consider time machine as not only the not preferred backup solution for a server but as completely incompatible with Mac OS X server - although, as I said, it seems that someone thought about backing up the LDAP database using time machine.
(On a Lion server this problem does not occur, the slapd will not be stopped and restarted when time machine is running. Moreover, I saw a com.apple.slapd.start notification in the slapd.log ... maybe this tells DirectoryService to try again.)
Cheers,
Wolfgang

Another problem I found with the MacOS X key bindings: the 6 key doesn't work!
In the config that ships with SQL Developer, I found this:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">6</Item>
</data>
</second>
</Item>
which should be:
<Item class="oracle.javatools.util.Pair">
<first class="java.lang.String">DOCUMENT_6_CMD_ID</first>
<second class="oracle.ide.keyboard.KeyStrokes">
<data>
<Item class="javax.swing.KeyStroke">meta 6</Item>
</data>
</second>
</Item>

External iSight microphone not working with Mac Pro

i have researched this extensively to no avail.
i have an external iSight camera plugged into a pci express firewire port (i got one hoping to solve the problem). the camera works fine except for the mic. it shows up in audio inputs in system preferences but will not produce sound.
i have troubleshot it by plugging it into a Powerbook G4 and the mic worked perfectly. i have also tried different firewire cables and plugged the iSight into the firewire ports on the machine.
does anyone know if there are know bugs with leopard and external iSight...seems so weird that it would work on a G4 and not my Mac Pro.
any insight or help would be greatly appreciated!

Welcome to  Discussions, bigboi78
I do not have an iNtel Mac, but external iSight, including its mic, work fine on my 10.5.6 G5 DP tower.
As I understand, you have checked System Preferences, found external iSight as a Sound > Input device, and selected iSight's Mic. However, adjusting the "Input volume:" slider there while you make some sounds does not effect the fact that the "Input level:" digital VU meter there never flickers regardless of input volume setting.
I also understand that you used the same Firewire cable with your external iSight on both Macs, so we can eliminate a possible cable problem.
If my understanding is correct, I can think of two possibilities that may give you a fix before you seek help from an Apple Authorized Service Provider (AASP.)
(1) Be sure to test with ALL other Firewire devices disconnected to avoid Possible Hardware or Software Conflicts with iSight. If you have any untested third party iSight or AV software, you might even consider whether that could be causing a conflict.
(2) Applying the latest Combo Updater often solves strange problems. Do it this way:
• Download http://support.apple.com/downloads/MacOS_X_10_5_6_ComboUpdate
but do not install it yet.
• Disconnect all Firewire devices (if not already done) and restart your Mac
• Repair permissions
• Apply the 10.5.6 Combo Updater
• Immediately after the restart that finishes the update, repair permissions again
• Reconnect iSight (only) to test whether the problem is solved
• If so, reconnect your other Firewire devices (if any) one at a time and test again
• If the problem returns when you have multiple FW devices connected,
you need to keep the others disconnected while using iSight's mic.
(3) My only remaining suggestion is to seek help from an AASP.
We will watch for your status update.
EZ Jim
G5 DP 1.8GHz w/Mac OS X (10.5.6) PowerBook 1.67GHz (10.4.11) iBookSE 366MHz (10.3.9) External iSight

InDesign bug with wacom intuos

Hello! I have a problem with In design. Since I got a new wacom intuos pen and touch, I have a bug with In Design, it won't save or save as, can't even do UNDO. Does anybody has ever experience this kind of problem? I have mac OS X version 10.6.8 and Adobe CS5.
Thank you!

Yes. But working in CS6. Can't save. Wacom stylus doesn't respond until I tap somewhere out of the CS6 environment and then tap back in the CS6 environment. Then sometimes stylus responds. Also try edit/purge/all action. It seems to help, but in reality this is no way to work.

PDF edits with Mac OS X Lion Aperçu don't show up on iPad: anyone with this issue?

I am using a MacBook Pro with Mac OS X Lion, and an iPad 2 with iOS 5. If I edit PDF files with Aperçu, the drawings or texts I have added do not display on the iPad 2. Is this a known Apple bug? Does anyone else have this problem?

Actually, it is in iBooks that I have this problem with PDF files that have been edited with Aperçu. With iPad Safari, the PDF edits are displayed correctly, through Google docs PDF viewer; I have not tried with iPad Safari independantly from Google docs, but I think it won't work. It does not work in iPad mail for such edited PDF files that are attached to a message.

Can someone confirm a possible bug with Universal Access?

Can someone confirm a possible bug with Universal Access?
I have a Mac Pro 3,1, 10.7.1 but if you could confirm or not this possible bug with any model.
In Energy Saver preference pane:
Set Mac to never sleep.
Set Display Sleep to ~2 minutes.
In Desktop & Screen Saver:
Set screen saver to start at ~1 minutes.
In Universal Access:
Check Enable access for assistive devices.
Check radio button Zoom to On.
Zoom in window not checked.
Confirm that Zoom works by pressing:
⌥⌘= (option, command, =).
Set screen back to normal by pressing ⌥⌘-.
Let screen sleep after screen saver starts.
Wake screen and see if ⌥⌘= still works.
Thanks … Ken

Other than the time intervals (smallest Screen Saver kick-in is 3 minutes), it works fine for me - at least I can still zoom in/out after waking the display.
Tested on two different MacBook Pro models in 10.7.1

Keychains bug with german umlaut

Recently i found a strange behavior within keychains. If the name of a keychain contains a german umlaut e.g "geschäftlich" i'm not able to activate sync keychain with .mac. i set the marker at "sync keychain with .mac" and click save. When i open the keychain settings again the dotmac setting is again NOT enabled and the keychains don't get synced.
If i make a new keychain "geschaeftlich" which contains the same items as "geschäftlich" everything works fine.
As far as i remember keychains worked with "umlaute" until at least 10.5.2

Probably one of many issues with the transition to MobileMe. I'd file a bug.

Problems with FileVault 2 on my iMac mid 2007 with Mac OS LION on it

Hi guys !
Get a problem with FileVault 2 on my iMac mid 2007 with MAC OS LION on it. FileVault 2 works, but after rebooting my system, it was unpossible to select an account with the cursor of my trackpad. No chance.
Before activate Filevault 2 the trackpad works fine. No problems to select an account. Anybody else with the same problem ?
Regards
Volker

Hi EVO67 !
I checked out your solution, but.... sorry it doesn't works.
So I cut off the bluetooth connection of the magic trackpad from my iMac and pair it again, but the problem is the same.
May be it's bigger bug with LION, so I need an update for this function.
But thank you very much for your help.
Regards
Volker

Bug with Mac OS X 10.5.3

Similar Messages

Maybe you are looking for