Bug with placement of audio controls

I have run across a potential bug in the iBooks application. When using <audio> tags in book chapters with the linear ="no" setting in the <spine> section of the .opf file, the placement of the <audio> controls is incorrect, even somewhat random. I have tried various structures - paragraphs, tables, lists, they all have this same problem.
These same .xhtml files work perfectly when viewed through a browser or when viewed in iBooks with linear="yes".
Has anyone seen this problem before?

Thank you Steve. I do have Liz Castro's books, they are very good. Creating the audio content is not the problem, have done it many times. The problem is I believe a bug in iBooks that incorrectly places the audio controls when the section of the eBook set as linear="no" in the <spine>. This setting takes the section out of the linear reading flow of the book and opens it up in a new page, outside of the book. It's very useful for large tables, etc. Liz has examples of this on her site also. It works very well, except for the audio controls. While the function, it seems impossible to control their location on the page.

Similar Messages

Bug with 22 KHz audio

When I load an MP3 using new Sound(new URLRequest("path"));,
and then subsequently play it with an argument passed to the play
method indicating how many miliseconds into the file Flash should
begin playing the audio... it always starts twice as far into the
file as it's supposed to if the file is encoded at 22 KHz instead
of 44 KHz.

Thank you Steve. I do have Liz Castro's books, they are very good. Creating the audio content is not the problem, have done it many times. The problem is I believe a bug in iBooks that incorrectly places the audio controls when the section of the eBook set as linear="no" in the <spine>. This setting takes the section out of the linear reading flow of the book and opens it up in a new page, outside of the book. It's very useful for large tables, etc. Liz has examples of this on her site also. It works very well, except for the audio controls. While the function, it seems impossible to control their location on the page.

Bug with creation of DVR controls/indicators

When creating a DVR control/indicator from the "New Data Value Reference" primitive on the block diagram, the control is created with "Size to Text" behaviour turned OFF for its label/caption. This is easily seen by attempting to modify the name of any newly created DVR control/indicator.
This is inconsistent with all other LabVIEW controls where "Size to Text" is ON by default.
The issue seems to occur for ALL situations where a DVR control/indicator is created from a block diagram object, leading me to think that it is likely an issue with the DVR control's template, wherever that is...
Chris Virgona

Hi Chris,
This was reported to R&D (#175625) for further investigation. Thanks again for the feedback, Chris! Have a great day!
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

Bug with placement new

I'm trying to compile a library that makes use of placement
new to perform its own allocations, I've attached a simple .cpp
file that demonstrates the problem. When compiling with alchemy I
get the following errors:

This is supposedly a problem with the OSX version of alchemy
which is fixed by using the -DOSX compiler option, however using
this gives the following errors
WARNING: While resolving call to function 'main' arguments
were dropped!
WARNING: While resolving call to function 'stub_null'
arguments were dropped!
WARNING: While resolving call to function 'stub_zero'
arguments were dropped!
WARNING: While resolving call to function 'stub_zero'
arguments were dropped!
WARNING: While resolving call to function 'stub_zero'
arguments were dropped!
WARNING: While resolving call to function 'stub_zero'
arguments were dropped!
WARNING: While resolving call to function 'stub_zero'
arguments were dropped!
Trying to run the resulting swf gives the following runtime
error:
RangeError: Error #1506: The specified range is invalid.
at
cmodule.pnew::FSM__ZStlsISt11char_traitsIcEERSt13basic_ostreamIcT_ES5_PKc/work()
at cmodule.pnew::CRunner/work()
at <anonymous>()
at flash.utils::Timer/_timerDispatch()
at flash.utils::Timer/tick()
More investigation is needed...

Bugs with Linking and Audio Solo buttons

* Solo function doesn't work properly
Stereo audio pair on A7 & A8. Audio in viewer shows pan set to -1 for normal stereo. Solo button for A7 give you audio in the left channel. Solo button for A8 gives you NO AUDIO. This button should give you audio in the right channel and yet it doesn't.
* Can't relink multiple clips
Select a group of clips and use command+L to unlink them. You should be able to reverse this process and relink them all with the same operation but YOU CAN"T. NOW YOU HAVE TO RELINK EACH CLIP INDIVIDUALLY by laboriously selecting the video, then the audio, and then invoking command+L for every single clip. This is stupid and counter-intuitive.
Hello Apple???? Are you listening??????
Message was edited by: Dave Berges

Select a group of clips and use command+L to unlink them. You should be able to reverse this process and relink them all with the same operation but YOU CAN"T.
CMD-Z (undo) doesn't work?
Stereo audio pair on A7 & A8. Audio in viewer shows pan set to -1 for normal stereo. Solo button for A7 give you audio in the left channel. Solo button for A8 gives you NO AUDIO. This button should give you audio in the right channel and yet it doesn't.
Is this ONLY if the audio is on A7 and A8? Well, I tried that on my end and it worked, no matter WHAT tracks I were on. Try trashing preferences.
Shane

Gigaworks S750 audio control pod - headphone jack

Apparently the headphone jack in the audio control pod has stopped working. I plug a working pair of headphones in and get no sound at all. If I fiddle around with wires in the sub, I get some clicking, but no other audio comes through.
The only thing I can think of is a recent storm knocked out power while my headphones were plugged in. Previously I had been using them with just the audio control pod hooked up (recent move), and they were working fine. Anyways just wanted to see if anyone had any ideas.
Thanks!

From my search to this forum, I found some possible causes which I will try of course and will help also people with future problems:
Posted by digant:
Hi
According to my broken POD (see page 26 to know about my problem), unfortunately I found that the CPU (the 24 pins chip named M34502E4FP) is broken.
In order to help other guys, having similar problems, I explain the problem I found in my POD in order you can verify if your POD can be repaired or not.
The probelm in my POD is in the RESET pin (pin 6) of the CPU. It is SC (internally) while it should be set to 5 V (5V is applied to R9 which is then connected to C and also to the RESET pin of the CPU. C is then connected to the ground). In case the RESET pin is not set to a value about 5 V, all the LEDs in the POD are switched off and you cannot also switch on the system.
Unfortunately this chip cannot be replaced with a new one (you can buy on Internet) because it has also to be programmed (e.g. it contains also EPROM, CMOS controlling the volume for bass, sub etc...).
My problem is now to buy a new POD. Can someone of you sell me a working POD?
So in this case looks like, the cause is the pod. Now looking for new pod...

Problem with Creative Audio Control Panel

) Heya, I just bought a SB X-Fi Xtreme Audio and I've encountered a problem with Creative Audio Control Panel. My OS is Win7 x64; I have installed the newest drivers for SB. The problem is that I can't set my setup for headphones. I mean I can do that and it's working untill I turn off the PC or restart the system. After that it always sets for 2/2. Speakers. Any ideas how to make this thing to remember my settings the way I want it's Thanks!

- The problem seems to be fixed Here's the solution for my card: <a rel="nofollow" target="_blank" href="http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493" title="Linkification: http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493"]http://forums.creative.com/t5/Sound-Blaster/SB-P7X-Series-Support-Pack-2-5-02-06-200-AudigySE-Value-LS/m-p/5493[/url]

Have lost all audio with our pavilion g6, checked volume, audio controls, tried rebooting no luck

paviliong6, windows 7 home,just purchased in july, 2011. AUdio stopped working, including output thru dvd, headphones, etc, have tried rebotting, volume,audio controls, accessories, etc. not luck. ran virus scan, came clean. any help?

Hi,
If this has just happened recently, try running Windows System Restore. If you have Norton Internet Security installed, you will need to disable Nortons Tamper Protection as shown in Step 2, on the link below.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20091112171719EN&ln=en_US
Once you've done this, shut down the PC. Windows System Restore is usaully best run in Safe Mode. Tap away at f8 as you start the PC to enter Windows Recovery Console. Use the arrow keys to select Safe Mode and hit enter. When this has loaded, from the Start Menu, click All Programs, click Accessories, click System Tools and launch System Restore. Pick a restore point at least 24 hours before the audio issue and then proceed with the restore process. When complete, Windows will reboot as normal.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

Annoying bug with Control Center

hello guys
i have this really annoying bug with control center
when you open, for example sms app, the keyboard shows, and you want to pull CC up.
just do it slowly and you'll see how your finger is typing smth like " bgt", ios for some reason isn't blocking keyboard when i'm trying to use control center
when you'll it fast, there is 100% chance to type space or one extra letter
i think people can accept such kind of bug on galaxy phones, but not on iphone.
is there something that i can do to fix this?

Keyboard clicks don't register unless you lift your finger when it's on a key; while the fact that you are dragging your fingers over the letters when swiping up for Control Center causes keyboard keys to be pressed is certainly annoying and admittedly kind of dumb, it shouldn't result in any letters getting actually typed. I just tried this myself, and although I do manage to "hit" a key on each row of the keyboard, they keys themselves never register with the Messaging app because my finger doesn't lift until the end of the swipe to bring Control Center up.
Drew

I am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

i am having bugs with the ios 5, after it got the update it is unable to make outgoing calls. in-place the incoming and outgoing texts are working please help me asap...!

Sometimes and this is network dependant if they suspect the phone to be lost or stolen as in this case with change of Sim card and provider then the origonal network can and some will block the phone untill you have rang them and proven it's not the case or if you have bough this 2nd hand then the origonal seller may have stopped paying the contract bill and thus the phone is blocked

Motorola S9-HD audio controls don't work with 3GS?

I'm the recent and proud owner of a 3GS and Motorola S9-HD headset. The headset easily pairs with the phone and plays music flawlessly (sounds awesome too). Only catch is that the only controls that work on the headset are the volume. The audio controls don't work at all.
Anyone know of a work around for this or if I'm just out of luck...

Word is the OS3.O for iPhone does not support full implementation of music controls via Bluetooth. Not a defect of your headset. As we all know, Apple has been dismal at implementing Bluetooth on its devices. However, word is that OS3.1 update for iPhone will fix this. I have both the Motorola S9-HD headset and the Motorola S805. Neither has full control with my iPhone 3GS using the current OS.

[ PROBLEM ] Audio Control app wont recognise card properly

Hi
I have a X-Fi ExtremeGamer card in my Win 7 home premium setup and am struggling to set it up properly.
Long story short , I pulled out the X-Fi card and tried the onboard audio as I was getting an issue with the audio playing around using the creative drivers ( volume changes mid song, positional audio in games was often unusal ).
The Realtek stuff wasnt too bad but I wanted to try my X-Fi card again, it is suppose to be better after all.
Anyways...
I disabled the onboard audio , safe mode and cleaned all the realtek drivers out and any lingering creative drivers with Driver Sweeper, used CCleaner to clean up the reg and rebooted.
Installed the BETA drivers from creative and the audio works fine, but when I try use the crystaliser or other SB features the app complains
" The audio device supported by this application is not detected. The application will exit. "
I installed Daniel_K's drivers from a CD ISO he put out a while back, and the applications worked fine but the audio dropped in and out, so I downloaded the official creative drivers for my card and OS, and the application worked fine again but as with Daniels drivers the audio dropped in and out so I reverted to the beta drivers... and the audio dropped in and out as well.
I worked it out to being the volume controls on the creative 5. speakers , which every set of speakers I have bought from creative have had the same issue, the volume slider on the cable... after some use it messes up the audio and it becomes safer just to adjust the volume in the software.
After deciding the issue was with the volume slider on the cable, I wanted to re-install Daniel_K's driver pack so I could access the other features, now it suddenly doesnt recognise the device anymore, nore does the official none beta drivers from creative, nor does the latest PAX drivers ... all report the same issue:
" The audio device supported by this application is not detected. The application will exit. "?
I am starting to tear my hair out here, the audio works and the card is recognised in the Device Manager as 'Creative SB X-Fi' , I have clean the drivers , the registery , used the patch that fixes a bug where the update wouldnt recognise cards properly , re-re-re-re-re-re-re-re-re-re-re-re installed the drivers.... carefully EACH time.
I triple checked I was downloading the Win 7 64bit OS ver of the X-Fi ExtremeGamer drivers.
What now ?
ALSO Who thought it was a bright idea to put up the volume to 87% when you install drivers ? It also unmutes the volume if you mute it before restart, and it puts the volume back up to 87% if you dare to lower the volume before rebooting the PC to complete the install.
( NOTE: It only does this after the initial reboot to complete the install, subsequent re-boots leaves the volume alone )

I give up...
I sent a form to the tech guys , detailing the problem and outlining the steps I took to fix the issue...and they direct me to http://support.creative.com/kb/ShowA...aspx?sid=55438?, oh I can use Device Manager to uninstall , oh and Control Panel - Programs to unistall the Creative stuff ( note: I am being very sarcastic here ).
This is the information I sent the tech:
Detailed Problem Description:
Creative audio application does not recognise SB X-Fi card , card audio functions just cant control the feature set. Error msg : " The audio device supported by this application is not detected. The application will exit. " Suspect nVidia installing of HD audio drivers causing 4 (four) additional High Definition Audio Devices to appear in the device manager screen. Unable to uninstall these devices as Win7 auto re-reinstalls with generic MS drivers, can only disable. Creative SB X-Fi card listed in audio devices as 2 - SB X-Fi. Suspect the audio control application looks in the first slot and doesnt recognise the device and fails, doesnt look at the 2 ( second slot ? ) Tried a full uninstall including going to safe mode and removing drivers with Driver Sweeper, CCLeaner to clear out registry entries and removed the card, booted to windows without the card , re-seated the card and re-installed the drivers. Forum entry for this problem at: http://forums.creative.com/t5/Sound-Blaster/PROBLEM-Audio-Control-app-wont-recognise-card-properly/td-p/57930
Thank you
and this is the advice I got ...
Thank you for contacting Creative Labs.
To avoid installing the incorrect driver on your soundcard, we suggest that you do a full uninstallation using the guidelines, steps provided in our website. Shutdown your PC then take out the card and make sure to place it on another slot. Second, disable your onboard audio and if your graphic card comes with any audio support as well, disable this feature.
Uninstalling Sound Blaster Drivers and Applications(Windows 7)
http://support.creative.com/kb/ShowA...aspx?sid=55438
Do not hesitate to add as much information in the next reply so we can understand the entire issue and assist you find the right solution or suggestion.
Best Regards,
... seriously ?

Mac OS X, WoW Wireless headset Audio Control Panel

Any updates on the Audio Control panel? As far as I know no mac user has gotten it to work with the headset. The error I found and posted (emailed as well) i hope would have been a lead to fixing it. Any news would be great.
Posting the error again just incase it's gotten over looked (posted in an other thread).
This is about a bug I found in the os X version of the wow wireless headset control panel.
Running the "Audio Control Panel" in the "Sound Blaster World Of Warcraft Audio Control Panel app" I get the following error. (.app are really just packages, so right click on it and view package and you'll find the real app in there under Contents\MacOS\Audio Control Panel).
Last login: Thu Jul 15 00:32:25 on ttys000
/Applications/Sound\ Blaster\ World\ Of\ Warcraft\ Audio\ Control\ Panel.app/Contents/MacOS/Audio\ Control\ Panel ; exit;
XXX-Mac-Pro:~ XXX$ /Applications/Sound\ Blaster\ World\ Of\ Warcraft\ Audio\ Control\ Panel.app/Contents/MacOS/Audio\ Control\ Panel ; exit;2010-07-15 00:34:59.905 Audio Control Panel[2854:903] *** Illegal NSComboBoxCell data source (<IlluminationViewController: 0x128010>). Must implement numberOfItemsInComboBoxCell: and comboBoxCellbjectValueForItemAtIndex:H
IDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.HIDBuildMultiDeviceList: Couldn?t open IOHIDManager.logout
[Process completed]
From a google search this site seems to say you've linked the data to the cell not the actual ComboBox.
http://www.cocoabuilder.com/archive/xcod
e/267584-nscomboboxdatasource-problems.h
tml
Aslo could be looking for HIDBuildMultiDeviceList in the wrong place?
Mac OS X 10.6.4
MacPro4,1
SB WoW Wireless Headset:
Product ID: 0x30d9 Vendor ID: 0x041e (Creative Labs) Version: 1.00 Speed: Up to 12 Mb/sec Manufacturer: Creative Technology Location ID: 0x5d100000 Current Available (mA): 500 Current Required (mA): 100
Thanks,
Casey

The headset works for me... but the control panel does not.
I get this error:
None of the features work. Not EQ, not voice FX, not THX - NOTHING.
And there is no way to clean uninstall to reinstall the drivers - I am having to manually sniff around the system folder... Try and resintstall - same issue.
Is there not a Beta Driver we can try and help with?
Cause this is an expensive failure right now.

Beats audio controls not working

Using my beats headphones this morning with my MacBook Air and iTunes. Everything is up to date. Although today now the audio controls on the cord won't work. Normally I can pause iTunes or control the volume. I do this multiple times a day but no go today.
Is this another 10.10.2 bug? Illustrator 2014 CC no longer works properly with my external monitor. I'm getting frustrated with all these bugs.
Also, in my 'About This Mac' info window, it shows my OS as "135122" instead of "Mac OS X" - I'm sure that's not normal.
Any thoughts, anyone?

I did a reboot and repaired permissions, which solved the beats headphones controls not working.
Still concerned about the Mac OS version display though. Curious to know if anyone else has that as well.

Sound Blaster ZXR Creative Audio Control panel

Hi. I bought a soundblaster ZXR. I uninstalled the driver for the old sound blaster X-Fi card, then shut off my computer and installed the ZXR card (which fits into a different slot than the X-Fi did), then restarted the computer and installed the software for the ZXR.
My situation is as follows: when I click on the Creative Audio Control panel, I get a message saying "The audio device supported by this application is not detected". I looked thru the internet and the general advice seems to be that the software for the older X-Fi card is not easily removed, and to remove it, I should uninstall the ZXR software, remove the ZXR card, re-install the old X-Fi card, then use some rather advanced techniques to make sure all of the software for the X-Fi card is uninstalled, then turn off the computer and take out the X-Fi card, then install the ZXR card, and re-install the software for the ZXR card. With some reluctance, I was about to do that, but then I noticed a folder called Sound Blaster Z Series was installed, so I opened it and clicked on Sound Blaster Z Series Control Panel, and a program opened up which allows me to make some changes to my sound set up.
My question is - When I click on the Creative Audio Control panel, am I supposed to get a message saying "The audio device supported by this application is not detected", because the Sound Blaster Z Series Control Panel is taking it's place? ...or does that error message tell me that there's something that I should address to avoid any future problems. I want to learn how to work with various sound programs, like sound forge, cakewalk, acid pro, kontakt, etc. and I want to start with a proper setup to help me avoid any unneeded frustrations. I have a fairly new computer with an ASUS P8H77 motherboard. Under Device Manager - Sound, Video and game controllers, I have the following entries:
High Definition Audio Device
Sound Blaster Audio Controller
Sound Blaster ZxR
Sound Blaster ZxR DBpro
I right clicked the High Definition Audio Device, then disabled it, but that didn't help so I enabled it again.
Thanks.

The Creative Audio Control Panel is a single entry leftover from your old X-FI. Uninstall just that. Then you can make a shortcut to the other you were speaking off and put that shortcut wherever you wish. I uninstalled an X-FI before and I had that control panel left over even after uninstalling what I thought was everything.

Bug with placement of audio controls

Similar Messages

Maybe you are looking for