Bug with Space Designer EQ and Filter Envelope?

In Logic Pro X I've noticed the window below the IR waveform only shows the volume envelope information. The EQ window does not appear making it impossible to use EQ. Anyone else notice this?

Jup, I checked it out and indeed doesn't happen when you startup a project and open the Space Designer for the first time. When you close Space Designer and open it again, the bug apears. And in various ways too. Sometimes the EQ window stays fixed, eventhough I click Filter Env. Sometimes the Filter Env stays fixed, eventhough I click reverse or EQ etc.
I actually just called apple support on this. The guy from the servicedesk was actually very helpfull. He's checking if the problem still exists in 10.0.4 (which will be released soon I think?). He's going to call me back in a few minutes. I think he was able to reproduce it too, so we are definately not alone on this
Hopefully it's fixed in 10.0.4 or maybe he can at least report this bug directly to the Logic developers. I'll keep you posted!

Similar Messages

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!

Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities

BUG: With same name jpg and RAW in same folder

OK, we have established that you can't import same filenames RAW/jpg into the same folder, but you can drag them in later. This is useful for stacking.
Bugs that occur when jpg and RAW with same name together in same folder. (have not tested for psd, tif etc.
1. If you rename the jpg, the RAW also gets renamed
2. You cannot move the jpg properly within the folder in grid mode.
Most of my landscape shots need to go to photoshop. I developed a nice workflow which integrates PS quite well with LR...see post here:
http://www.adobeforums.com/cgi-bin/webx/.3bc34679/5
I created the workflow so that I could retain same name RAW/jpg stacks in the same folder. I have altered the workflow slightly so the jpg gets autorenamed with filename_# ... see the link above.
Kev

It's the same design issue Kevin. Sidecar files get renamed automatically and these are treated as sidecars.

Impulses with space designer

I have been talking with a friend.He was telling me that i can download impulses to load into space designer.That model like neve pre amps and stuff alike.Where can i get these impulses? I actually think i found them, i downloaded them and it looks like a bunch of munbers and symbols.Is this right? If so what do i do with them once i get them.How do i load them into the space designer?Any advice would be greatly apprecieated.
Thanx
MikeY B

Mikey B,
follow these instructions.
SvK
http://discussions.apple.com/thread.jspa?messageID=2485267&#2485267

Space designer pop and clicks

Hi guys,
I have two work stations in my studio. on my secondary wrokstation, I run a 1.8 dual powermac with the latest Logic 7.2. Ever since I upgraded to OSX 10.4.10 I'm having problems with the space designer. it starts creating clicks, pops and distortions. I know it's the space designer, because when I remove it, everythings fine again.
any idea what's wrong? help is much appreciated! thanks

Have you tried increasing the audio buffer size by one notch to see if that fixes it?

Space Designer Presets and Impulses... Gone?!

I'm stymied...
Been wanting to audition some Space Designer reverbs, but for some reason all of the presets were gone from the settings menu. I don't remember what I did exactly, but I found them and moved them into the SD settings folder somewhere on my system. And now I have all of my presets back. But...
Every time I load one of the presets, Logic asks me where the .sdir file is for it.
This never used to be a problem. Why it's different today is beyond me. But anyway...
Can someone please tell me where .sdir files are supposed to be located? And also, just so I'm sure everything is where it should be, where should the SD preset settings live?
-=iS=-

Works perfectly.
For some reason my impulse responses and settings were in two places:
iSchwartz HD/Library/Logic/Impulse Responses
...and...
~/Library/Applications Support/Logic/Impulse Responses
Weird...
Anyway, thanks again.

Bug with use of TRn and nX editting in formatting and non advancing output

Hello.
I am using non-advancing output to print data values in columns in tables. Where a column doesn't have values
I use the TRn editor to skip over the column field. However, this doesn't work with non advancing output.
e.g., the following code doesn't work properly. The output is missing the 10 spaces between the data items.
(I tried changing TR10 to 10X and that didn't work either).
a = 1.0
b = 2.0
! Write data
write(10,'(F10.4)',advance="no") a
! Skip 10 places
write(10,'(TR10)',advance="no")
! Write data
write(10,'(F10.4)',advance="no") b
This works fine on all my other compilers, just not the one that comes with oracle studio 12.2.
Edited by: davidb on 16-Oct-2011 15:06

My original post wasn't too clear (sorry). The bug is with TR.
The following code should write the numbers 1 to 10 with four spaces separating each value. But no spaces are written.
program tst2
integer :: i
do i=1,10
write(10,'(I4)',advance='no')i
write(10,'(TR4)',advance='no')
end do
close(10)
end program tst2
In fact the file fort.10 which is produced contains
12345678910
Whereas, with gfortran, open64, ifort, nag Fortran compilers I get (there are four spaces, this forum just doesn't show them all):
1 2 3 4 5 6 7 8 9 10
Edited by: davidb on 16-Oct-2011 15:07

Parental controls bug with 10.6.4 and Safari 5?

When Safari is locked in Parental Controls it only opens approved sites. If a user tries to go to a non-approved site a dialog appears allowing an admin to add the site. If the admin authorizes ongoing use, the site should be added to the Safari bookmarks bar.
That's not working any more. The site is not added. THe Admin has to drag the url to the bookmarks bar and reauthenticate. If the admin does not do this the authorization will not stick.
Anyone else see this?

Hi Carolyn. Is there any special reason repairing permissions would work for this? I stopped doing that years ago since I never had it fix anything. (OS X Permissions have deep and seemingly intractable problems, but the repair function doesn't seem to help.)
Thanks for the OpenDNS tip. I have used them in the past. Their new family filter is a good feature, but it's just a packaged version of their standard filtering (and it will have the same problem with local address drift as their standard feature - OpenDNS fails when your public IP address changes, you need to run a DNS updater). I need finer grained control than OpenDNS offers.
Apple seems to break Parental Controls with abandon. Sometimes I think the engineers hate PC.

Bug with 1.2 (podcasts and on-the-go playlists)

Previously, I was able to add podcasts to an On-The-Go playlist, and listen to them one after another just like a group of songs. Great for mowing the lawn. And yes, I think I will have to have one of the new shuffles.
Anyway, after installing 1.2 (on my Windows formatted 60GB 5G iPod) it's not letting me do that any longer. I do the same procedure as before, but when I click a podcast track in the on-the-go playlist, it just repeats that track over and over like it does when picking it from the podcasts menu.
Just for kicks I tossed both music tracks and podcasts in the OTG playlist to see what happens. Same as above if I start with a podcast. If I start with a music track it flips through the songs normally and ignores the podcasts.
Anyone else notice this?
PS: I'm addicted to Texas Hold'em. Nice work with that one!

Yes, there's no way this can be considered proper operation. After reading this thread and doing some more experimentation, I have found that the work-around is to uncheck the "Skip when shuffling" option for each podcast. However, this is definitely a bug for the following reasons:
Set the iPod's Shuffle setting to none. Then go to a playlist (or make an on the go playlist) with a Podcast who's "Skip when shuffling" option is checked. The bug is still present. If this were an intentional change for playlists to honor the "Skip when shuffling" setting of a song or podcast, then it shouldn't have any effect when not shuffling.
The second thing is to think about what is meant by the "Skip when shuffling" setting. In iPod firmware 1.1.2 (the last one), if you picked "Shuffle Songs" from the iPod main menu, it wouldn't select songs/podcasts with the "Skip when shuffling" setting checked. However, anything a user added to a playlist should always be played when playing that playlist. This is what the 1.1.2 iPod software did and it is what users expect. Having to uncheck the "Skip when shuffling" setting for every podcast that gets downloaded before they can be used in a playlist is ludicrous.

Labview XY graph with space between data and top/bottom of graph

In Labview, how do I modify the properties of the XY Graph so that there is some empty space (of say 1 unit) between the top and bottom of my graph and the data points I'm plotting. For example, I have a sine wave and when its autoscaled, the top point is at the very top of the graph but I want some space between the top of the graph and the highest point of the sine wave. I could "unautoscale it" and edit the minimum and maximum to be 1 above and below the data points but is there a way to set it so it stays that way regardless of the data points that I input?
Thanks,
Kevin

elset191 wrote:
I don't know how big of a cushion it gives, but it's there.
if you want to programmatically set it you can also do this (as I learned a bit ago right here on these forums!)
Message Edited by for(imstuck) on 05-24-2010 03:45 PM
Message Edited by for(imstuck) on 05-24-2010 03:46 PM
CLA, LabVIEW Versions 2010-2013
Attachments:
graphScale.PNG ‏9 KB

Need help with space between bullet and text in list

I've been trying to increase the space between my bullet and text in my list. Everytime I increase the margin-left or padding everything moves to the right but the space between the bullet and text stays the same. Would someone help me figure out what I'm doing wrong. Website is located here. http://www.webassistantsllc.com/clients/sport
Thanks
Lynne

Thanks for the help. That worked perfectly.
Another question on my bullet:
Is there a way to adjust the position of my bullet in a list? http://www.webassistantsllc.com/clients/sport
Thanks
Lynne

17" laptop with space for hdd and ssd?

I'm looking for my next laptop. I want a 17" but i'd like an ssd and a hdd. Please could someone tell me which models can have both drives? Budget is a factorand a high spec isnt really necessary.thanks!

Most HP Envy 17t-j100 series notebook computers should support 2 HDDs and possibly an mSATA SSD as indicated in the HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC Maintenan.... Please see "Page 2 - Chapter 1 - Product description" for specifics. HP Envy 17t-k000 series may also meet your requirements.
Please see HP USA - Home & Home Office Store computers and their prices.
If you have any further questions, please don't hesitate to ask.
Please click the White KUDOS "Thumbs Up" to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Bug With iTunes 6 cut and paste?

I've just installed iTunes 6, when I try to cut and paste lyrics into the lyrics box, it doubles the paste (it does it twice). I'm not having this problem in any other app, and I've rebooted, and it is still happening. Very very very annoying. Has anyone else had this problem. Is there a work around? I've replicated the problem on my G5 desktop.

Yes, but that was posted before 6.0.1, and they didn't fix it in 6.0.1...
He did not say it would be in the next update (6.0.1) which cam out very quickly, but that it would be fixed in a future update. At least you know they are aware of the problem and are working on it.

New IMG1.9 bug with space used (HD vs SD) on external drives

I hooked up a 2TB drive, and was very impressed about how well it works and how easy it was to set up, thanks so much.
That said, I noticed that the tally for recorded content on the external drive is not working exactly correctly for me, in a minor way. When I go to the Drive Status menu item on the DVR menu and press the right arrow to go to the External Drive status screen It is saying something like "23 hours of HD content, 42 hours of SD content". But I have never recorded anything in SD, and have even gone back and verified that none of the content that I have recorded at all is in SD.
The same list on the internal drive status screen seems to work exactly as it should.
Minor issue, but figured I'd report.

2 things to try.
First would be the Set Top Box Aut-Correction in the menu under In Home Agent. Cures many minor ills.
The other (that worked under 1.8 when the internal drive misreported percentage) is a simple re-boot of the box (either from the menu or by pulling the power).
I have been using a 1 TB external drive for a year now (beta tester) .and have never seen this behavior.
Hope one of the suggestions fixes it for you.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

Space Designer resets Wet + Dry mix amounts when sample dragged

Hi,
There is a fairly annoying bug with space designer. Try this:
1. Insert space designer on a track.
2. Turn down the DRY mix to zero, and the WET mix to full.
3. Open the Logic browser, and find a wav file to drag into space designer.
4. Drag the wav file in.
You'll see that the dry mix and wet mix reset themselves. This happens each time you drag in a file.
Am I missing something?

Bug with Space Designer EQ and Filter Envelope?

Similar Messages

Maybe you are looking for