BUG WITH "UPDATE ALL APPS":

I have taken notice that in the last two iTunes Updates, it has affected the function of the “Update All APPS.”  If there are APPS to be updated and you click on the button “Update All APPS” it may update just one of the APPS and does not continue updating the remaining APPS.  I either have to click on each APP individually, and choose UPDATE or EXIT iTunes and reopen it and sign in again.  Even in doing so; iTunes may only UPDATE one APP and then stop; other times it will continue to finish the updating the remaining APPS.
This can be quite frustrating especially when you have to go to each individual APP and choose UPDATE.   I think this is a bug that needs to be examined in iTunes.  I have uninstalled iTunes in the correct steps and reinstalled iTunes, but the problem still continues to happen.
I am sure that you want your software to be consistent and felt I should bring this to your attention.
Thank you for reviewing my feedback.  If you have any questions or comments, please do not hesitate to contact me.
Sincerely,
Joseph Snook
[email protected]
718-863-1012

It's still there for me (iOS 5.0.1), I used it a couple of hours ago.
Have you tried closing the App Store app completely and then re-opening it ? From the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Similar Messages

  • ITunes 11 for Mac "Update All Apps" grayed out, requiring relaunch to update again

    On iTunes 11.2.1 (1) "Update All Apps" grays out after I update once. I need to relaunch iTunes to get it to be clickable again. I am definitely logged in, etc., so it seems like a bug with iTunes, yes?

    The last several versions of iTunes have had this bug. The "Update All Apps" works once, and then it's greyed out after that until you quit and relaunch.
    As a workaround, you can click the first app, hold down the shift key, and click the last app to select them all. Then right click on one of the apps and select "Update X Apps."

  • Folders disappear after updating all apps

    Spend all this time organizing apps in folders, then as soon as I "update all apps" the folders disappear and the apps are in alphebetical order again. This has happened several times. Also some of the apps will be gone because there are too many to fit without folders. What good is the folder feature if they won't stay there? Anyone know if I'm doing something wrong or if this is a bug with i0S4? I have a 2nd gen. Ipod touch. The folder feature is supposed to work with it.

    Painthead--
    I have a 2nd Gen iPod touch. The folders feature does work with it; I've had no issues...yet.
    Try this: once you have moved apps into folders--before doing the update all apps--let the iPod synch. You then should be able to update apps to your hearts content, because both the iPod and iTunes understand your folders.
    Doc

  • Itunes crash during update all apps or even a few apps at a time in windows

    My itunes crashes when I click "update all apps" or even when I just update manually a few apps at a time.  Its not related to the version of itunes it seems the issue has occured during the passed few versions.  I've tried logging off the store account and relogging in.  I've reinstalled itunes.  I've uninstalled all apple programs from the pc and itunes and reinstalled everything fresh. I've deleted the library files and let itunes create new ones and the issue still persists. Any ideas?
    Thanks

    Hi dj_alien,
    If you are having an issue with iTunes for Windows quitting unexpectedly during use, I would suggest that you troubleshoot using the steps in this article - 
    iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • "Update all apps" button - only one app is downloaded!

    Every time if I click on "Update all apps" to update more than one app, iTunes is downloading one app only. I have to click a second time on the button to download the rest.

    I have just updated iTunes my credit was there before update and now I can't download updates for Apps I have alreaady purchased, receive an error message to the effect 'due to a temporary problem with accounts......use an alternative payment' I don't need to pay for the update and am afraid to Redeem another gift voucher in case it goes missing too I was in MAS this morning and my credit was definitetly there but since the update it has vanished from MAS and iTunes
    Edit: I can update my apps via my iPhone without the issues iTunes has atm
    Message was edited by: minib

  • ITunes 'Update all apps' button only updates single app.

    I want to update all my apps.
    I click 'Update all apps' button.
    iTunes asks for my password.
    iTunes updates one app.
    I click 'Update all apps' button.
    iTunes updates all the other apps.
    Why oh why oh why doesn't iTunes just update all the apps after I enter my password in the first place?

    I have just updated iTunes my credit was there before update and now I can't download updates for Apps I have alreaady purchased, receive an error message to the effect 'due to a temporary problem with accounts......use an alternative payment' I don't need to pay for the update and am afraid to Redeem another gift voucher in case it goes missing too I was in MAS this morning and my credit was definitetly there but since the update it has vanished from MAS and iTunes
    Edit: I can update my apps via my iPhone without the issues iTunes has atm
    Message was edited by: minib

  • Update all apps automatically

    Why is it any alternative to use update all apps automatically in iOS like the function in Mac OS X Mountain Lion 10.8?

    No and that is exactly my question, why can not update apps in iOS as it goes with Mac Mountain Lion Power Nap updates?

  • Update all apps missing

    Suddenly "update all apps" is missing?? Causing me to have to update updated apps individually. Don't know where it went! But updating updated apps individually is not a fun thing to do. How this could "disappear" I find rather strange.

    It's still there for me (iOS 5.0.1), I used it a couple of hours ago.
    Have you tried closing the App Store app completely and then re-opening it ? From the home screen (i.e. not with the App Store 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Update all apps does not work

    Since the previous version of iTunes and including the new one I just installed (11.3) doe not work as expected, or as it used to. When I check for my installed Apps, and there are more than one app to update, I click the option in the bottom right that says 'Update all apps', but when you do that, it only updates the first one, and you then have to click it again for each individual app. What is the purpose of an 'Update ALL apps' if it doesn't do that?
    Also, why has the option to sign in and stay signed in gone? I used to be able to do that, so when I opened iTunes I was automatically logged in and could continue, but now I have to login each time I open iTunes. This is annoying.
    Thanks for the help.

    Welcome to the Apple Community.
    Assuming this is not the first time you have used your Apple TV
    You might try restarting the Apple TV by removing ALL the cables for 30 seconds.
    Also try restarting the router. (Also try removing it’s power cord for at least 30 seconds)
    If the problem persists, try a restore, you may want to try the previous procedures several times before doing this.
    If restoring from the Apple TV doesn't help, try restoring from iTunes using a USB cable.
    If this is a new Apple TV, in addition to trying the above, it may also be that your network router is not allowing access to the timeserver, check that your router allows access over port 123.

  • "Update All Apps" in iTunes only downloads one at a time.

    From Library / Apps (left pane), clicking "Update All Apps" button (bottom-right), I'm prompted for my Apple ID password, I enter it, it's accepted…and only one app update downloads. I click the button again, and the next downloads.
    Why don't all updates download?
    iTunes for Mac 11.2.2 (3)
    2011 13" MacBook Pro
    Mac OS X 9.3 Mavericks

    With some notable exceptions like audio apps that actually run in the background, most apps on the task bar are not actually running.  They are not actually doing anything, just sitting there in a suspended state until the next time you execute them by bringing them up on the screen.  There really is no need nor reason to be constantly clearing them away.

  • What happened to Update All Apps???

    I can no longer select UPDATE ALL apps on my iPhone. For some insane reason, if I have 4 updates, I have to go to the App store, select an app, click on Free, click on install, then watch it start loading the program, then go BACK to the app store, and repeat the process for every app?
    And I no longer get update notifications or options in iTunes? Is this for real??

    Yes, now none of my applications will open. The application attempts to open, the goes back to the desktop screen. I had this happen once before, but when I "updated all" it fixed the problem. Now non of my applications work!!
    I have attempted deleting all applications and reloading them, but no dice. I says I have already loaded installed the applications. I reinstall, but it still does not work.
    Anyone have a solution for this?

  • Last time I synced with iTunes all apps (except the originals) and all the work I'd put in them got erased. Any way to stop that?

    Last time I synced with iTunes all apps (except the originals) and all the work I'd put in them got erased. Any way to stop that?

    Your apps didn't get erased.  They're still there in your iTunes Library, you just didn't tell iTunes to sync all Apps when you synced.  You have to either choose the specific apps you want to sync or say sync all apps.

  • I successfully unlocked my iPhone 4S (AT&T, iOS 7.0.2) and many apps are missing. Went to app store and updated all apps. If I manually update a single app it will show up. Solution to get all apps back in place?

    I successfully unlocked my iPhone 4S (AT&T, iOS 7.0.2) and many apps are missing. Went to app store and updated all apps. If I manually update a single app it will show up. Solution to get all apps back in place?

    Hi downeyjdm,
    Welcome to the Support Communities!
    To resolve this issue, I would suggest updating your iOS to the latest version, which is 7.0.3.
    iOS 7.0.3
    http://support.apple.com/kb/DL1691
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If your purchased apps are still not appearing on the iPhone, you can redownload them:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store
    http://support.apple.com/kb/HT2519
    Cheers,
    Judy

  • IPhone 4s with ios6 all apps crashing after opening

    iPhone 4s with ios6 all apps crashing after opening. Yesterday  my phone started to crash. Everytime i started whatsapp or others, it stars working at first than goes back main screen. Resetted the device by pushing home and lock buttons. Nothing happened. Tried to format and it's worked again. But i don't want to set my phone from beginning.  When i restored from backups nothing happened. Only hard format fixed. what else can i do with this situation ?

    @alperkilislioglu,    
         Try restoring it but set it up as a new iPhone this time. If that does not work then bring it to Apple.

  • Am I the only one who has bugs with closing any app after the iOS 7.1 update?

    Several times the screen freezes after I close any app with three fingers, but once I had to shut it down by pressing home and top button, cause my pad didn't respond to anything.

    Close all apps in the multi-task window
    1.Double-click the Home button.
    2. Swipe the app's preview up to close it.
    3. Preview will fly off the screen.

Maybe you are looking for

  • XSTRING with Binary of PDF - display R3 report in portal

    Hello, We have a requirement to show an R/3 report on portal as PDF. User will then be able to Print/Save the same. I have browsed through different posts on SDN and The idea I have is: 1. Print the report to spool (Backend). 2. Convert the spool to

  • How do i redirect wifi sync in iOs 5 to a different computer user

    how do i redcirect wifi sync to a different user on the same computer? how do I redirect wifi sync to a different computer on the same network?

  • Acrobat Distiller Standard In Win 2k3 Server

    Hi,     We have a service running in a win 2k3 server which converts office files to PDF using acrobat distiller standard 8. Often some PDF files misses table borders or some images gets distorted. If I rerun, proper PDF files are rendered.  And the

  • Bevel and emboss comes out wrong in pdf

    I am using bevel and emboss in indesign on objects i created in illustrator and copy/pasted in. when i export the piece to pdf the bevel and emboss looks wrong. not smooth at all. how can I fix this?

  • Creating Menus with CMs made in DVDSP4

    I'm not quite sure how to explain what I want but here goes...I encode my movies using BitVice, but before doing so I have to open the movie in QT Pro and turn on the text track so that BitVice will recognize the chapter markers. For some reason toda