BugCheck ERROR 1001 Server 2012

Kindly Assist,
I am experiencing the error below on one of my Cluster Nodes.
Event 1001, BugCheck
The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 (0x0000000000000000, 0xfffffa80c3640028, 0x00000000b6000000, 0x0000000000040150). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 082714-46893-01.
I Tried to analyze the minidump and am getting the info below
hal.dll hal.dll+2d965
fffff801`13403000 fffff801`1346f000
0x0006c000 0x50875a79
10/24/2012 6:03:21 AM Microsoft® Windows® Operating System
Hardware Abstraction Layer DLL 6.2.9200.16442 (win8_gdr.121023-1503)
Microsoft Corporation C:\Windows\system32\hal.dll
ntoskrnl.exe ntoskrnl.exe+160ef9
fffff801`1346f000 fffff801`13bbb000
0x0074c000 0x51a966cd
6/1/2013 6:13:17 AM Microsoft® Windows® Operating System
NT Kernel & System 6.2.9200.16628 (win8_gdr.130531-1504)
Microsoft Corporation C:\Windows\system32\ntoskrnl.exe
How do I fix this issue?

Hi,
This Forum is not the best place for dump file analyzing. It's suggested to contact Microsoft Customer
Support Services (CSS) so that a dedicated Support Professional can help you on this issue.
To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS¡¯
If you are outside the US, please refer to
http://support.microsoft.com for regional support phone
numbers.
Thanks for your understanding.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Similar Messages

Log error "Could not load file or assembly 'BarcodeConversion' or one of its dependencies. Access is denied. This code work fine in server 2008 but get this error in server 2012

This code work fine in server 2008, but get this error in server 2012. Do yo have any idea?

Need some more info as to where this is installed and how.
First thing to try would be to uninstall the solution and reinstall.
Check the GAC for your assembly as well as web.config.
If you don't see it in one of those places, something went wrong with the install and you'll need to start over.
Brandon James SharePoint Developer/Administrator

Server Manager Error, Windows Server 2012 Standed

Windows
Server 2012 on my desktop
and I've been in it then
open Server Manager "ServerManager.exe - This application could not be started"
error this time. In it,
the option is YES and
NO. YES is open
to the side of .net.
Please help me as soon as possible.

Hi,
Please check the event viewer to get more detailed error information about this issue.
You can also remotely access it from another server by adding this server in the server manager of the remote server, and try to access the roles and features from the remote server, and tackle the problem from there.
I hope this helps.

File/Storage Errors in Server 2012

Hi
We are running Server 2012 (proper, downloaded from licensing portal) and are using it as an NFS server for some of our VM Ware machines.
Yesterday the NFS storage went offline for approx. 15 minutes, and then came back online. The following errors are found in Event Viewer, these errors appear to have been happening since 21/08 but this the first time the NFS server has gone offline.
This error is found in the Applications Log:
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.
). Please check previous event logs for details.
And is accompanied by this error:
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath:
LDAP://mydc.mydomain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=mydc,DC=local). Please check that the claims list configured for
this machine in Group Policy exists in Active Directory.
Additionally the following error appears in the System log, but not at the same time as the above:
The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before
the next startup or logon for this user, and this may result in slow startup and boot performance.
Our PDC is Server 2003 R2, we have a 2008R2 DC and the 2012 server seems to be authenticating with this DC. There are no errors on that DC.
Any help appreciated.
Many thanks

I thing the following site gives a solution:
It is a schema problem...
Event ID 12339 and 12344: File Server Resource Manager failed to find claim list
Problem: You are running a Windows Server 2012 file server and you see the error messages in your logs every 15 minutes or so.
1) Event ID: 12339
File Server Resource Manager failed to find the claim list 'Global Resource Property List' in Active Directory (ADsPath: LDAP://dc1.domain.local/CN=Global Resource Property List,CN=Resource Property Lists,CN=Claims Configuration,CN=Services,CN=Configuration,DC=domain,DC=local).
Please check that the claims list configured for this machine in Group Policy exists in Active Directory.
2) Event ID: 12344
File Server Resource Manager finished syncing claims from Active Directory and encountered errors during the sync (0x80072030, There is no such object on the server.) Please check previous event logs for details.
Solution: You can either upgrade the Active Directory schema to version 56 (Windows Server 2012) or safely ignore the error messages.
If you can update the schema of your domain. Follow these steps:
1)
log on to Windows Server 2012 as Administrator of your domain
2)
Copy from "support \adprep" in the media of Windows Server 2012 to "c:\"
3)
run this command
c:\adprep\adprep.exe /forestprep
THANKS to KIM HELLMAN
Search for kim hellman blogspot and the error message

Bare metal restore of full server backup fails with RPC error 0x800706BA (server 2012)

With Windows Server 2012, after creating a successful windows server backup (full server), I am unable to do a bare metal restore of the system.
EFI System Partition, C:, D: are the volumes on a single array (Raid 5).
Loading WinRE and launching re-image, the full server restore stops after completing the C: restore just after beginning the D: drive restore (data volume) with the error with the message about RPC error 0x800706BA, unavailable.
The system will not boot as a result of the failure.
What may be causing this?
[edit]
I think I have two things working against me here... one, Volume Shadow Copy service wasn't running in WinPE and two.. the D: volume contains data deduplication.
I think this is causing some of my problems.
Is there an additional service that I need to start in WinPE to get a volume that was deduplicated restored perhaps using wbadmin?

Hi,
Thanks for the reply Shaon.
The hardware system is identical; however, I am increasing storage capacity from 12TB to 16TB. Basically, the system is the same, just new hard drives (4x4TB versus 4x3TB). Drives are all identical enterprise class drives and I am actually using
the same system (backup, swap drives then restore).
I tried both using the WinRE restore (re-image) with the backup set, and tried using wbadmin. Both produce same RPC unavailable messages (although using the GUI based tool via WinRE provides the additional error code #).
I do not have any idea what to look at to try to figure this one out.
[edit]
I was just informed of this posting:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/147efccc-e0e9-4458-852e-c3a44ae5cb64/the-system-image-restore-failed-error-details-he-rpc-server-is-unavailable-0x800706ba?forum=windowsbackup
and in my case, this lab server does in fact act also as a DC as well as a file server... do I need to spin up a secondary controller (perhaps in a VM on another machine) to do this restore?

Setup closed with exit code: 0x84C40013 - Silent Install error - SQL Server 2012 express management studio SP1

I am trying to create a silent installation package for SQL Server 2012 Express Management Studio SP1. (both x86 & x64)
Prior to installation I have performed the following :
1. Turned ON the Windows feature 'Microsoft .NET Framework 3.5.1' (I had read somewhere on the internet that this is required prior to installation)
2. Installed Microsoft .NET Framework 4.0
I am using the following command line to perform an unattended install :
<EXENAME> /Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
However, the installation fails abruptly.
The application installs successfully with the following command line :
<EXENAME> /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
The error occurs only while attempting to install the application with the /Q switch appended.
Please help.

Hello Fanny,
Thanks for providing the link to the SQL Server 2012 unattended install guide.
However, I must highlight that I was running the setup.exe with "Run As a Administrator" option and still facing the issue.
Anyways, I found out the root cause and I must say that it was a rather silly one.
As I had stated previously, the following command line was causing the issue :
<EXENAME>
/Q /IACCEPTSQLSERVERLICENSETERMS /ACTION=install /FEATURES=Tools
I simply changed it to the following and it worked....
<EXENAME>
/QUIET /IACCEPTSQLSERVERLICENSETERMS /ACTION=INSTALL /FEATURES=TOOLS
It so seems that everything must be in CAPITALS for this to work.
Regards,
Soumen

Continued DCOM Errors on Server 2012

We started noticing this error reoccurring after I set up a Powershell routine that sends daily emails to us with the errors from the systems Event Viewer log. At first it was once or two a day and today it was 5 yesterday it was 7. We are constantly
getting the follow error on our 2012 server:
The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display the message, or you may not have permission to access them. The following information
is part of the event:
'{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
When I use a Powershell routine that returns information about all the DCOM's I get this:
Application ID: {73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}
Caption: Microsoft WMI Provider Subsystem Host
Description: Microsoft WMI Provider Subsystem Host
Installation Date:
Name: Microsoft WMI Provider Subsystem Host
Status:
So Powershell script says it says it is there. Then how can we get the error message that the DCOM cannot be found? We have ran a malware program on the server and come up with nothing. Checked the registry key and everything there seems to be
set correctly. Checked for server updates and there are none. Checked for Firmware updates (Dell PowerEdge Server) and nothing there either.
Of the 10 or so servers we have, this one with Server 2012 on it is the only one that giving us these errors, or any errors (not including Terminal Service errors), and we would like to find out what the problem is and correct it.
Thank you for any suggestions.
Mark

I am still getting these errors more than 10 times a day during the week but hardly any on the weekends.
Server
Event Time
Type
EventID
Source
Message
VOLCANO
08/27/2014 07:54:11
Error
10010
DCOM
The description for Event ID '10010' in Source 'DCOM' cannot be found. The local computer may not have the necessary registry information or message DLL files to display
the message, or you may not have permission to access them. The following information is part of the event:'{73E709EA-5D93-4B2E-BBB0-99B7938DA9E4}'
I had changed the power settings to every 5 hours which should have only given me 5 or 6 a day but I was getting as many as 15. Hard Drives were set to not power down. So I am not sure that the 'Sleep' suggestion in the one article is correct. But
this morning I went and put the power setting to never for the display.
Any other suggestions?

SQL Server 2012 Install Errors on Server 2012

I am getting an error when installed a new copy of Microsoft SQL Server 2012 Service Pack 1 on a newly created Server 2012 that has all its updates. About 90% of the way through the installation this is the error I received below:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
Attempted to perform an unauthorized operation.
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xDC112D1C%25400xBB814387
Second Error when continuing:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Click 'Retry' to retry the failed action, or click 'Cancel' to cancel this action and continue setup.
For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3128.0&EvtType=0xBA6E21AA%25400x9A41B222
I clicked cancel on both errors but I don't know if this will impact my application. After the installation completes I can see everything passed except the Database Engine. Any thoughts on this issue?

Hello,
If this is a VMware machine, please read the following article:
http://support.microsoft.com/kb/2799534
If the above is not the case please share the Detail.txt log file with us. The following article may help you locate the file on disk:
http://msdn.microsoft.com/en-us/library/ms143702(v=sql.110).aspx
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Infamous 0x80072EE6 error WSUS (Server 2012)

Hi Folks
In a test test lab I have setup a windows 2012 R2 server (home-dc-01.pcecorp.com) and a few domain joined windows 8 clients. The server has WSUS installed and I have configured a group policy with WSUS settings.
However the test clients report the Infamous error: 0x80072EE6 when I try to run an update.
client log snip:
2014-10-21 14:45:18:403 884 960 EP FATAL: SLS: Failed to construct full endpoint URL, error = 0x80072EE6
I have tried setting WUServer and WUStatusServer in group policy to combinations of:
home-dc-01.pcecorp.com
http://home-dc-01.pcecorp.com
http://home-dc-01.pcecorp.com:8530 (I understand this is what I should use!)
the client is picking up the settings from group policy policy as [HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate] is getting populated
I can query DNS and ping 'home-dc-01.pcecorp.com'
Date/time and zone are correctly set
I have disabled the firewall on both the server and client
Dropped a test.htm file on the server in "C:\Program Files\Update Services\WebServices\Root"and I can sucsesfully access this from a client in a browser at: http://home-dc-01.pcecorp.com:8530/test.htm
Bindings on the 'WSUS Administraton' site are as default:
http: 8530
https: 8531
Any other ideas?
Thanks in advance

Hi,
The error code 0x80072EE6 means that the client can't recognize the protocol.
Plese post the complete windowsupdate.log here. It may give some hints.
Besides, could you try to run the WSUS Client Diagnostic Tool on the client?
To download WSUS Client Diagnostic Tool, please click the link below,
http://www.microsoft.com/en-us/download/details.aspx?id=30827
Best Regards.
Steven Lee
TechNet Community Support

Windows Update error 80246003 Server 2012 / 2012 R2

Hi All,
I'm running into a problem trying to apply an update from WSUS 3.2.7600.226. Other updates have succeeded OK but I'm left with this one failing on more than one server. All the other updates seem fine but once this update fails windows update appears broken
and will no longer update anything.
The update is KB2538243. I've attached the error to this post and also included some logs below.
So far I've removed the servers from wsus. Stopped the wuauserv service and deleted the "software distribution" folder. used gpupdate to detect them again. Nothing seems to work. The patches have been applied to wsus to allow updating of W8 and
2012.
reportingevent.log
{C8746CA9-B4D1-444C-A328-9DD4C55D5B7F} 2014-04-10 14:12:52:638+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{D7B6F804-F14F-496A-8441-AB3C208E846F} 2014-04-10 14:12:53:388+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
{0879984E-30B9-4D9B-AF57-BC1C7D79D2C5} 2014-04-10 15:15:53:126+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{7CE18B21-4171-4C2A-9721-10B3A0065E1D} 2014-04-10 15:15:53:126+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{606FD01F-1067-42BE-B79F-70FA7D4E786C} 2014-04-10 15:15:53:954+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
{F2B3147F-9BA2-469C-94E7-2AE5ABCED6D9} 2014-04-10 15:15:56:798+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{4C24E5FF-754E-4FDE-A94A-EA3FC05421E9} 2014-04-10 15:15:56:798+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{8CA4C3D4-6863-4024-8B0C-64B4E3D67E82} 2014-04-10 15:15:57:767+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
{587487B1-5F5C-4020-88D8-D455DBFF3600} 2014-04-10 15:18:32:569+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{AA9B99F1-B716-43A8-A5B0-F500D139202B} 2014-04-10 15:18:32:569+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{82AF887E-C294-41C6-95EF-69349940BEA8} 2014-04-10 15:18:33:491+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
{38E21A73-07B7-45B0-83BF-E6647E19AFCF} 2014-04-10 15:18:35:913+0100
1 147 [AGENT_DETECTION_FINISHED]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Software Synchronization Windows Update Client successfully detected 1 updates.
{1D60C4A7-A5E8-404F-9D03-6468C5C35A05} 2014-04-10 15:18:35:913+0100
1 156 [AGENT_STATUS_30]
101 {00000000-0000-0000-0000-000000000000}
0 0
AutomaticUpdatesWuApp Success
Pre-Deployment Check Reporting client status.
{762EE1E6-106F-4AFF-885B-04B91F472AA7} 2014-04-10 15:18:36:866+0100
1 161 [AGENT_DOWNLOAD_FAILED]
101 {729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdatesWuApp Failure
Content Download Error: Download failed.
windowsupdate.log
2014-04-10 15:18:36:569
704 3c0
AU ## START ## AU: Download updates
2014-04-10 15:18:36:569
704 3c0
AU #########
2014-04-10 15:18:36:569
704 3c0
AU # Found no download approved updates.
2014-04-10 15:18:36:569
704 3c0
AU #########
2014-04-10 15:18:36:569
704 3c0
AU ## END ## AU: Download updates
2014-04-10 15:18:36:569
704 3c0
AU #############
2014-04-10 15:18:36:804
704 a18
DnldMgr BITS job {61E23E31-6C46-4638-8145-8CDB273C62E1} completed successfully
2014-04-10 15:18:36:804
704 a18
DnldMgr CUpdateDownloadJob::GetNetworkCostSwitch() Neither unrestricted or restricted network cost used, so using current cost
2014-04-10 15:18:36:804
704 a18
IdleTmr WU operation (DownloadManagerDownloadJob, operation # 3451) stopped; does use network; is not at background priority; will NOT start idle timer (task did not previously stop it
2014-04-10 15:18:36:804
704 a18
IdleTmr Decremented PDC RefCount for Network to 0
2014-04-10 15:18:36:804
704 a18
IdleTmr Decremented idle timer priority operation counter to 2
2014-04-10 15:18:36:819
704 a18
Misc Validating signature for C:\Windows\SoftwareDistribution\Download\49b9fcd994be15e2906948beef673948\470640aa4bb7db8e69196b5edb0010933569e98d:
2014-04-10 15:18:36:851
704 a18
Misc Microsoft signed: Yes
2014-04-10 15:18:36:851
704 a18
DnldMgr Download job bytes total = 4479832, bytes transferred = 4479832
2014-04-10 15:18:36:851
704 678
DnldMgr *********** DnldMgr: New download job [UpdateId = {542F36E8-38E5-49AE-9AEE-F35C6FF7107D}.103] ***********
2014-04-10 15:18:36:866
704 678
DnldMgr WARNING: Update validation failed, error 80246003.
2014-04-10 15:18:36:866
704 678
DnldMgr FATAL: DM:CAgentDownloadManager::DownloadUpdate: pDownloadJob->Init failed with 0x80246003.
2014-04-10 15:18:36:866
704 678
DnldMgr WARNING: Got error (hr = 80246003) starting update 0 in call 20. Notifying call.
2014-04-10 15:18:36:866
704 678
DnldMgr Error 0x80246003 occurred while downloading update; notifying dependent calls.
2014-04-10 15:18:36:866
704 26c
AU >>## RESUMED ## AU: Download update [UpdateId = {729A0DCB-DF9E-4D02-B603-ED1AEE074428}]
2014-04-10 15:18:36:866
704 26c
AU # WARNING: Download failed, error = 0x80246003
2014-04-10 15:18:36:866
704 678
DnldMgr *********
2014-04-10 15:18:36:866
704 678
DnldMgr ** END ** DnldMgr: Download Call Complete [Call 20 for caller AutomaticUpdates has completed; signaling completion.]
2014-04-10 15:18:36:866
704 678
DnldMgr *************
2014-04-10 15:18:36:866
704 26c
AU Download call completed, hr = 0x80246003
2014-04-10 15:18:36:866
704 26c
AU #########
2014-04-10 15:18:36:866
704 26c
AU ## END ## AU: Download updates
2014-04-10 15:18:36:866
704 26c
AU #############
2014-04-10 15:18:36:866
704 678
DnldMgr FATAL: DM:CAgentDownloadManager::LoadUpdateMetadataFromDatastore: GetUpdates failed with 0x80248007.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {587487B1-5F5C-4020-88D8-D455DBFF3600}
2014-04-10 15:18:32:569+0100 1
147 [AGENT_DETECTION_FINISHED] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Software Synchronization
Windows Update Client successfully detected 1 updates.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {AA9B99F1-B716-43A8-A5B0-F500D139202B}
2014-04-10 15:18:32:569+0100 1
156 [AGENT_STATUS_30] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Pre-Deployment Check
Reporting client status.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {82AF887E-C294-41C6-95EF-69349940BEA8}
2014-04-10 15:18:33:491+0100 1
161 [AGENT_DOWNLOAD_FAILED] 101
{729A0DCB-DF9E-4D02-B603-ED1AEE074428}
103 80246003
AutomaticUpdates Failure
Content Download Error: Download failed.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {38E21A73-07B7-45B0-83BF-E6647E19AFCF}
2014-04-10 15:18:35:913+0100 1
147 [AGENT_DETECTION_FINISHED] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Software Synchronization
Windows Update Client successfully detected 1 updates.
2014-04-10 15:18:36:866
704 678
Report REPORT EVENT: {1D60C4A7-A5E8-404F-9D03-6468C5C35A05}
2014-04-10 15:18:35:913+0100 1
156 [AGENT_STATUS_30] 101
{00000000-0000-0000-0000-000000000000}
0 0 AutomaticUpdatesWuApp
Success Pre-Deployment Check
Reporting client status.
2014-04-10 15:18:36:866
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:36:866
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:36:866
704 678
Report CWERReporter::HandleEvents - WER report upload completed with status 0x8
2014-04-10 15:18:36:866
704 678
Report WER Report sent: 7.9.9600.16422 0x80246003(0) 729A0DCB-DF9E-4D02-B603-ED1AEE074428 Download 101 Managed
2014-04-10 15:18:36:866
704 678
Report CWERReporter finishing event handling. (00000000)
2014-04-10 15:18:36:882
704 26c
IdleTmr Decremented idle timer priority operation counter to 1
2014-04-10 15:18:36:882
704 308
AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
2014-04-10 15:18:36:882
704 308
AU WARNING: GetUpdateMetadata2 failed, error = 0x80248007
2014-04-10 15:18:38:585
704 208
AU BeginInteractiveInstall invoked for Install
2014-04-10 15:18:38:585
704 208
AU Auto-approved 0 update(s) for install (for Ux), installType=0
2014-04-10 15:18:38:585
704 208
AU WARNING: BeginInteractiveInstall failed, error = 0x8024000C
2014-04-10 15:18:38:585
704 870
AU AU received handle event
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Wu Exemption info from NLM, assuming not exempt, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU Triggering Offline detection (non-interactive)
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:585
704 870
AU #############
2014-04-10 15:18:38:585
704 870
AU ## START ## AU: Search for updates
2014-04-10 15:18:38:585
704 870
AU #########
2014-04-10 15:18:38:585
704 870
IdleTmr WU operation (CSearchCall::Init ID 21) started; operation # 4008; does not use network; is at background priority
2014-04-10 15:18:38:585
704 870
IdleTmr Incremented PDC RefCount for System to 1
2014-04-10 15:18:38:585
704 870
Agent *** START *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 21]
2014-04-10 15:18:38:585
704 870
AU <<## SUBMITTED ## AU: Search for updates [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:585
704 654
Agent *** END *** Queueing Finding updates [CallerId = AutomaticUpdates Id = 21]
2014-04-10 15:18:38:585
704 654
Agent *************
2014-04-10 15:18:38:585
704 654
Agent ** START ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 21]
2014-04-10 15:18:38:585
704 654
Agent *********
2014-04-10 15:18:38:585
704 654
Agent * Online = No; Ignore download priority = No
2014-04-10 15:18:38:585
704 654
Agent * Criteria = "IsInstalled=0 and DeploymentAction='Installation' or IsPresent=1 and DeploymentAction='Uninstallation' or IsInstalled=1 and DeploymentAction='Installation' and RebootRequired=1 or IsInstalled=0
and DeploymentAction='Uninstallation' and RebootRequired=1"
2014-04-10 15:18:38:585
704 654
Agent * ServiceID = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7} Managed
2014-04-10 15:18:38:585
704 654
Agent * Search Scope = {Machine & All Users}
2014-04-10 15:18:38:585
704 654
Agent * Caller SID for Applicability: S-1-5-18
2014-04-10 15:18:38:929
704 654
Agent * Found 0 updates and 66 categories in search; evaluated appl. rules of 287 out of 594 deployed entities
2014-04-10 15:18:38:929
704 654
Agent *********
2014-04-10 15:18:38:929
704 654
Agent ** END ** Agent: Finding updates [CallerId = AutomaticUpdates Id = 21]
2014-04-10 15:18:38:929
704 654
Agent *************
2014-04-10 15:18:38:929
704 654
IdleTmr WU operation (CSearchCall::Init ID 21, operation # 4008) stopped; does not use network; is at background priority
2014-04-10 15:18:38:929
704 654
IdleTmr Decremented PDC RefCount for System to 0
2014-04-10 15:18:38:929
704 26c
AU >>## RESUMED ## AU: Search for updates [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:929
704 26c
AU # 0 updates detected
2014-04-10 15:18:38:929
704 26c
AU #########
2014-04-10 15:18:38:929
704 26c
AU ## END ## AU: Search for updates [CallId = {46E5E308-CC0D-49A1-A033-DA0A05BA7E9E} ServiceId = {3DA21691-E39D-4DA6-8A4B-B43877BCB1B7}]
2014-04-10 15:18:38:929
704 26c
AU #############
2014-04-10 15:18:38:929
704 26c
AU All AU searches complete.
2014-04-10 15:18:38:929
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037
2014-04-10 15:18:38:929
704 26c
AU WARNING: Failed to get Network Cost info from NLM, assuming network is NOT metered, error = 0x80240037

The patches have been applied to wsus to allow updating of W8 and 2012.
Looks to me like you've installed KB2734608 on the WSUS server and then failed to perform the required post-installation client-side procedures, resulting in the WUA being unable to validate the installation file (because it doesn't have the SHA-2 hash cached
in the client-side datastore).
2014-04-10 15:18:36:866 704
678 DnldMgr WARNING: Update validation failed, error 80246003.
0x80246003
-2145099773
WU_E_DM_UNKNOWNALGORITHM
The file metadata requested an unknown hash algorithm
Lawrence Garvin, M.S., MCSA, MCITP:EA, MCDBA
SolarWinds Head Geek
Microsoft MVP - Software Packaging, Deployment & Servicing (2005-2014)
My MVP Profile: http://mvp.microsoft.com/en-us/mvp/Lawrence%20R%20Garvin-32101
http://www.solarwinds.com/gotmicrosoft
The views expressed on this post are mine and do not necessarily reflect the views of SolarWinds.

Wsus installation error in server 2012

Hi
when i am choosing the content directory path in wsus i am geting this error
Log file is located at C:\Users\Administrator\AppData\Local\Temp\1\tmp9249.tmp
Post install is starting
Fatal Error: A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
Can any one help me to fix this issue

Hi,
could you please check if this is correct:
- is Named pipes/TCP enabled in SQL Server Configuration manager?
- Is Remote Connection Allowed?
- Is Windows Firewall on or off?
- If it is On, did you create an exception for port 1433 in Windows Firewall?
- Could WSUS contact SQL server?
Please click on Propose As Answer or to mark this post as and helpful for other people. This posting is provided AS-IS with no warranties, and confers no rights.

Error in server 2012 r2 dashboard.exe

Good Morning.
I've failed UN Several Days That gives me the dashboard in the event viewer and placement That keeps me open , and sea In Safe Mode or normal .
It gives me the following codes :
Exception Code : 0xe0434352
Offset Errors: 0x3b94
Path: C : \ Program Files \ Windows Server \ Bin \ Dashboard.exe
Path access module with errors: C : \ Windows \ system32 \ KERNELBASE.dll
Identifier report: 491cea6e - b5ca - 11e4-9450 - b4b51fa695a5
Some find no solution , see if you could help me .
Thanks in advance.

Hi,
Could you please describe the isse more detail?
Did you mean you could not open the event viewer?
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

BSOD with BugCheck Error 1001 Memory Dump Help

Hello, I need a bit of help. My computer just crashed with a blue screen of death suddenly while I was doing some audio editing (I do this frequently, never had an issue before). I have no idea what to do with this memory dump I got, so I was
hoping someone could help me.
https://onedrive.live.com/redir?resid=3BE2487D830FFF04!107&authkey=!ANb7Ny6ZZXtBfL8&ithint=file%2c.dmp
That's the link to the memory dump file. Let me know if you need any other data from me. Thanks!

Thompa2
This was Related to
lvrs64.sys Kernel Audio Improvement Filter Driver from Logitech Inc. I would install the newest driver available. Yours is ~ 2years old.
Product: WinNt, suite: TerminalServer SingleUserTS Personal
Built by: 7601.18247.amd64fre.win7sp1_gdr.130828-1532
Machine Name:
Kernel base = 0xfffff800`03407000 PsLoadedModuleList = 0xfffff800`0364a6d0
Debug session time: Thu Feb 27 00:37:31.119 2014 (UTC - 5:00)
System Uptime: 0 days 15:35:44.212
BugCheck 1000007E, {ffffffffc0000005, fffff88002ec1fc6, fffff88007de3758, fffff88007de2fb0}
Probably caused by : lvrs64.sys ( lvrs64+2fc6 )
SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e)
This is a very common bugcheck. Usually the exception address pinpoints
the driver/function that caused the problem. Always note this address
as well as the link date of the driver/image that contains this address.
Some common problems are exception code 0x80000003. This means a hard
coded breakpoint or assertion was hit, but this system was booted
/NODEBUG. This is not supposed to happen as developers should never have
hardcoded breakpoints in retail code, but ...
If this happens, make sure a debugger gets connected, and the
system is booted /DEBUG. This will let us see why this breakpoint is
happening.
Arguments:
Arg1: ffffffffc0000005, The exception code that was not handled
Arg2: fffff88002ec1fc6, The address that the exception occurred at
Arg3: fffff88007de3758, Exception Record Address
Arg4: fffff88007de2fb0, Context Record Address
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
lvrs64+2fc6
fffff880`02ec1fc6 45396924 cmp dword ptr [r9+24h],r13d
EXCEPTION_RECORD: fffff88007de3758 -- (.exr 0xfffff88007de3758)
ExceptionAddress: fffff88002ec1fc6 (lvrs64+0x0000000000002fc6)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 00000000003cd464
Attempt to read from address 00000000003cd464
CONTEXT: fffff88007de2fb0 -- (.cxr 0xfffff88007de2fb0;r)
rax=0000000000000000 rbx=fffffa800eb37970 rcx=0000000000000001
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002ec1fc6 rsp=fffff88007de3990 rbp=00000000003cd440
r8=0000000000000000 r9=00000000003cd440 r10=0000000000000002
r11=00000000003cd440 r12=fffffa800eb33df0 r13=0000000000000000
r14=00000000003cd440 r15=00000000003cd440
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
lvrs64+0x2fc6:
fffff880`02ec1fc6 45396924 cmp dword ptr [r9+24h],r13d ds:002b:00000000`003cd464=????????
Last set context:
rax=0000000000000000 rbx=fffffa800eb37970 rcx=0000000000000001
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff88002ec1fc6 rsp=fffff88007de3990 rbp=00000000003cd440
r8=0000000000000000 r9=00000000003cd440 r10=0000000000000002
r11=00000000003cd440 r12=fffffa800eb33df0 r13=0000000000000000
r14=00000000003cd440 r15=00000000003cd440
iopl=0 nv up ei pl zr na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010246
lvrs64+0x2fc6:
fffff880`02ec1fc6 45396924 cmp dword ptr [r9+24h],r13d ds:002b:00000000`003cd464=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT
PROCESS_NAME: System
CURRENT_IRQL: 0
ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
EXCEPTION_PARAMETER1: 0000000000000000
EXCEPTION_PARAMETER2: 00000000003cd464
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800036b4100
GetUlongFromAddress: unable to read from fffff800036b41c0
00000000003cd464 Nonpaged pool
FOLLOWUP_IP:
lvrs64+2fc6
fffff880`02ec1fc6 45396924 cmp dword ptr [r9+24h],r13d
BUGCHECK_STR: 0x7E
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from 0000000000000001 to fffff88002ec1fc6
STACK_TEXT:
fffff880`07de3990 00000000`00000001 : fffffa80`00000000 00000000`00000000 00000000`00000000 fffffa80`12f495f0 : lvrs64+0x2fc6
fffff880`07de3998 fffffa80`00000000 : 00000000`00000000 00000000`00000000 fffffa80`12f495f0 00000000`00000000 : 0x1
fffff880`07de39a0 00000000`00000000 : 00000000`00000000 fffffa80`12f495f0 00000000`00000000 00000000`00000000 : 0xfffffa80`00000000
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: lvrs64+2fc6
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: lvrs64
IMAGE_NAME: lvrs64.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 505cb9b9
STACK_COMMAND: .cxr 0xfffff88007de2fb0 ; kb
FAILURE_BUCKET_ID: X64_0x7E_lvrs64+2fc6
BUCKET_ID: X64_0x7E_lvrs64+2fc6
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7e_lvrs64+2fc6
FAILURE_ID_HASH: {4d85bbe7-3359-5d02-03c0-19e8d54c8fdc}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

SQL Service error on SCCM 2012 R2 Evaluation VHD

Hi
I've downloaded the VHD SCCM 2012 R2, but, SQL Server evaluation is out of date
http://www.microsoft.com/en-us/download/details.aspx?id=40840
I've one error "SLQ Server 2012 has expired...."
How I do now ?
Thanks at all
Scorpio92

Or you could fix this Microsoft?
This issue is at least 2 years old going back to the previous product (SCCM 2012 SP1):
https://social.technet.microsoft.com/Forums/en-US/151f6aa0-5391-4396-998f-d5d5782ed08f/system-center-2012-service-pack-1-configuration-manager-evaluation-vhd
How was this not fixed when you created the 2012 R2 VHD?
This is literally unfathomable how you could do this even once - you create a VHD for evaluation with a date specific eval of SQL? But then you imbeciles manage to do it at least a second time?
None of you at the team behind this deserve your jobs.

Server 2012 VM Guest (AppassureCore) keeps getting BugChecks...not sure whereto start?

Bear with me here as there is a lot of technical data I need to present I believe so that I can help you all help me :)
I have a Server 2012 VM Guest running on Hyper-V on a Server 2012 host.
The VM is running my main Appassure core - I have a replicated core also but am having no issues with it at all.
The Host machine has 2 XEON E5540s, for a total of 8 cores. It has 48 GB of memory.
There is also another VM guest running on this host and that is a Server 2008 R2 that is my FSMO master and has no issues whatsoever.
Both guests are running Virtual Memory with starting memory of 512 and max of 49152.
Both VMs and the host each have their own GBe dedicated NIC.
The problem 2012 VM is setup with 4 virtual processors. The Server 2008 R2 (non-problem) VM is running on 8 Virtual processors.
Since the 2012 machine is running Appassure, I have an iSCSI connection to a NAS device. This is the same setup as the replicated Appassure core in every way except that the replicated core is a physical machine.
All integration services are installed and available.
For the most part, just before each bugcheck, I get a rapid succession of around 350 errors that happen within 2 minutes, then the crash...
I won't list them all, but here are the main ones:
EVENT 12293, VSS (I get 4 of these in a row.)
Volume Shadow Copy Service error: Error calling a routine on a Shadow Copy Provider {b5946137-7b9f-4925-af80-51abd60b20d5}. Routine details IVssSnapshotProvider::QueryVolumesSupportedForSnapshots(ProviderId,8388617,...) [hr = 0x8000ffff, Catastrophic failure
Operation:
   Query volumes supported by this provider
Context:
   Provider ID: {b5946137-7b9f-4925-af80-51abd60b20d5}
   Snapshot Context: 8388617
Event 20, iScsiPrt
Connection to the target was lost. The initiator will attempt to retry the connection.
Event 7, iScsiPrt (2 of these)
The initiator could not send an iSCSI PDU. Error status is given in the dump data
Then another 12293, VSS error
EVENT 481, ESE
AppRecovery.ExchangeCheckHost (3840) DSM_JET_INSTANCE: An attempt to read from the file "C:\ProgramData\AppRecovery\MountPoints\064ab6b0-e8e9-4862-9756-e47f19ca248f\E__\Microsoft\Exchange Server\Mailbox\First Storage Group\Mailbox Database.edb" at
offset 7934615552 (0x00000001d8f0a000) for 8192 (0x00002000) bytes failed after 30 seconds with system error 121 (0x00000079): "The semaphore timeout period has expired. ". The read operation will fail with error -1022 (0xfffffc02). If
this error persists then the file may be damaged and may need to be restored from a previous backup.
Event 419, ESE
AppRecovery.ExchangeCheckHost (3840) DSM_JET_INSTANCE: Unable to read page 968580 of database C:\ProgramData\AppRecovery\MountPoints\064ab6b0-e8e9-4862-9756-e47f19ca248f\E__\Microsoft\Exchange Server\Mailbox\First Storage Group\Mailbox Database.edb. Error -1022.
EVENT 454, ESE
AppRecovery.ExchangeCheckHost (3840) DSM_JET_INSTANCE: Database recovery/restore failed with unexpected error -1022.
I then get about 6 more of the VSS errors 12293
Then comes the motherload - a flood of Ntfs errors. Here are some examples:
EVENT 55, Ntfs
A corruption was discovered in the file system structure on volume C:\ProgramData\AppRecovery\MountPoints\064ab6b0-e8e9-4862-9756-e47f19ca248f\E__.
The Master File Table (MFT) contains a corrupted file record. The file reference number is 0x800000000050e. The name of the file is "<unable to determine file name>".
EVENT 131, Ntfs
The file system structure on volume C:\ProgramData\AppRecovery\MountPoints\064ab6b0-e8e9-4862-9756-e47f19ca248f\E__ cannot be corrected.
Please run the chkdsk utility on the volume C:\ProgramData\AppRecovery\MountPoints\064ab6b0-e8e9-4862-9756-e47f19ca248f\E__.
I then get about 300 more of the EVENT 55, Ntfs errors that are all exactly the same except that they reference a different 'File Reference Number'
Then the bugcheck happens.
Now, I ran WinDBG and it pretty much gave me an answer that didn't really help all that much:
REFERENCE_BY_POINTER (18)
Arguments:
Arg1: 0000000000000000, Object type of the object whose reference count is being lowered
Arg2: fffffa8305c6e040, Object whose reference count is being lowered
Arg3: 0000000000000010, Reserved
Arg4: fffffa8301d642a1, Reserved
The reference count of an object is illegal for the current state of the object.
Each time a driver uses a pointer to an object the driver calls a kernel routine
to increment the reference count of the object. When the driver is done with the
pointer the driver calls another kernel routine to decrement the reference count.
Drivers must match calls to the increment and decrement routines. This bugcheck
can occur because an object's reference count goes to zero while there are still
open handles to the object, in which case the fourth parameter indicates the number
of opened handles. It may also occur when the object’s reference count drops below zero
whether or not there are open handles to the object, and in that case the fourth parameter
contains the actual value of the pointer references count.
Debugging Details:
Page 198c7b not present in the dump file. Type ".hh dbgerr004" for details
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: 0x18
PROCESS_NAME: Core.Service.e
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from fffff80160a0c5ae to fffff80160868440
STACK_TEXT:
fffff880`05822418 fffff801`60a0c5ae : 00000000`00000018 00000000`00000000 fffffa83`05c6e040 00000000`00000010 : nt!KeBugCheckEx
fffff880`05822420 fffff801`608c4841 : fffffa83`01b92940 00000000`00000001 fffff880`05822800 00000000`00000000 : nt! ?? ::FNODOBFM::`string'+0x4bfe4
fffff880`058224c0 fffff801`608ad4d1 : fffffa83`0209ab68 fffffa83`01b92940 fffffa83`00000011 fffff801`00010224 : nt!ExpWaitForResource+0xa1
fffff880`05822550 fffff880`01960447 : 00000000`00000002 00000000`00000000 fffffa83`02099180 fffffa83`075ab010 : nt!ExAcquireResourceExclusiveLite+0x1e1
fffff880`058225c0 fffff880`01960809 : fffffa83`075ab010 fffffa83`02099180 ffff8975`f1909000 00000000`00000000 : Ntfs!NtfsVerifyCorruption+0x9b
fffff880`05822670 fffff880`0183b0b4 : fffffa83`075ab010 00000000`00000000 fffffa83`02513010 00000000`00000001 : Ntfs!NtfsProcessAttachedCorruptions+0x85
fffff880`058226e0 fffff880`0183b1c6 : fffffa83`00240000 fffffa83`075ab010 00000000`00000000 fffffa83`02513010 : Ntfs!NtfsCleanupIrpContext+0x574
fffff880`05822730 fffff880`018c07aa : 00000000`00000000 fffffa83`008c7f20 00000000`c0000022 00000000`00000000 : Ntfs!NtfsExtendedCompleteRequestInternal+0xd6
fffff880`05822770 fffff880`019276fb : fffffa83`075ab010 fffff8a0`01ff0e00 00000000`00000000 00000000`00000000 : Ntfs!NtfsLockVolume+0x2e9
fffff880`05822830 fffff880`01926f06 : fffffa83`02513010 00000000`00000000 00000000`00000000 00000000`00000000 : Ntfs!NtfsUserFsRequest+0x547
fffff880`05822870 fffff880`00a83845 : fffffa83`04abb5c0 fffff801`60c40cc5 fffffa83`025131b8 fffffa83`02513010 : Ntfs!NtfsFsdFileSystemControl+0x126
fffff880`05822970 fffff801`60c3d6c7 : fffffa83`025131b8 fffffa83`02513010 fffff880`05822cc0 fffff880`02c62180 : fltmgr!FltpFsControl+0x165
fffff880`058229d0 fffff801`60c58fa6 : 00000000`00000002 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopXxxControlFile+0x7e5
fffff880`05822b60 fffff801`60867453 : 00000000`4273b7f8 00000000`4273b1e0 00000000`0807c568 00000001`80994dc8 : nt!NtFsControlFile+0x56
fffff880`05822bd0 000007fa`02ad2f7a : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiSystemServiceCopyEnd+0x13
00000000`4273b198 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : 0x000007fa`02ad2f7a
STACK_COMMAND: kb
FOLLOWUP_IP:
nt! ?? ::FNODOBFM::`string'+4bfe4
fffff801`60a0c5ae cc              int     3
SYMBOL_STACK_INDEX: 1
SYMBOL_NAME: nt! ?? ::FNODOBFM::`string'+4bfe4
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5165e551
BUCKET_ID_FUNC_OFFSET: 4bfe4
FAILURE_BUCKET_ID: 0x18_nt!_??_::FNODOBFM::_string_
BUCKET_ID: 0x18_nt!_??_::FNODOBFM::_string_
Followup: MachineOwner
If you have made it this far, I thank you. I really have no idea where to go with this and am worried because obviously it involves my main backup so any help would be greatly appreciated.
It should be said that I am also creating a backup of this actual machine from within the machine itself, using AppAssure. Not sure why that matters much except that I am guessing the VSS errors are referring to the actual machine itself - not a protected external
machine.
Thanks again!
Mike

I have done a chkdsk on our core and it still pulled this error today. It gives the 474 error:
Description: AppRecovery.ExchangeCheckHost (5648) DSM_JET_INSTANCE: The database page read from the file "C:\ProgramData\AppRecovery\MountPoints\6b27d60b-b8b3-4f79-9a4c-82ef68e71cba\H__\Microsoft\Exchange\IDP-EX01-JRNL1\IDP-EX01-JRNL1.edb" at offset 63335301120
(0x0000000ebf140000) (database page 1932839 (0x1D7E27)) for 32768 (0x00008000) bytes failed verification due to a page checksum mismatch. The expected checksum was [714d714d506b3ced:6b1894e799aebc30:ed5612a95c689a54:cbbd3442bc4760a4] and the actual checksum
was [8fad7052506b3ced:6b1894e799ac3638:ed5612a95c6a105c:cbbd3442bc45eaac]. The read operation will fail with error -1018 (0xfffffc06). If this condition persists then please restore the database from a previous backup. This problem is likely
due to faulty hardware. Please contact your hardware vendor for further assistance diagnosing the problem.

BugCheck ERROR 1001 Server 2012

Similar Messages

Maybe you are looking for