Bugged display mode after cable switch

Im using the dvi-vga adapter supplied with the mini with my dell 2005fps. It has been working fine until I plugged in a DVI cable to check out the mini on my TV which has a DVI-in. It worked on the TV but after using that DVI cable the display only shows up correctly on my 2005fps when using a DVI cable.
When I use my VGA cable only the 1680x1050 display mode is bugged. 1600x1000 works like it supposed to but it dosnt fill the screen completely. And this isnt the only computer using the display, so yes I want to use the VGA cable.

Somehow changing those cables did somthing to my displays settings. I did a factory reset on my moniter and Im not having the problem anymore.
I did not make any changes to the moniter either before or durning the problem.

Similar Messages

Why not all fields dimmed or show in display mode after system status TECO and CLSD for Project

Dear All,
When Sets the system status TECO or even CLSD all fields for WBS Elements are not goes to Display mode. User can still edit them or change then.
The fields are:
1. WBS Element Description, technical name: PRPS-POST1
2. Person responsible number, technical name: PRPS-VERNR
Other Progress and Customer enhancement tab pages for WBS Element all fields there also editable in TECO and CLSD system status.
The client do not want to set LOCK system status for master data option.
Is there any enhancement or standard way of doing that?
Regards
Saqib Usman

Dear Saqib,
Its a standard behavior of the system. In CLSD status, transactional data like Procurement gets restricted along with WBSE no and its scheduling details. But it allows to you change like WBSE desc./Responsible person.
Also go thru the below link for clarification of WBSE system status:
http://help.sap.com/saphelp_470/helpdata/en/ee/41f82246ee11d189470000e829fbbd/content.htm
For locking all master data, as above experts suggest, you should use MDLK/LKD.
Regards
Shishir

ME22N : Change PO Line item to Display Mode, After All quantity has GRN

Hi Experts,
In ME22N, PO change mode if the line item has checked with 'Delivery Completed' Indicator in 'Delivery' tab I want to shows that row always in 'Display' mode. Please help me to modify that table control within the exit. I'm using,
Enhancement : MM06E005
Exit Name : EXIT_SAPMM06E_012
Regards,
Rajasekaran.S

Hi Raja,
Think that this is a late reply but might be helpfull to others.
To make an item in display only mode you will have to create an enhancement implementation in the below method,
Class --> CL_TABLE_VIEW_MM
method -->MODIFY_SCREEN_TC_LINE
in implicit enhancement at the end of this method i code as below.
data : lv_ekpo type ekpo.
if <DYN_DATA> is assigned.
move-corresponding <DYN_DATA> to lv_ekpo.
if lv_ekpo-XXX is not initial.
loop at screen.
screen-input = 0.
modify screen.
endloop.
endif.
hope this helps.
If you have a better solution kindly share the same.
Regards,
Taher

Transaction goes to display mode after an error message / POPUP - Urgent

Hi All,
    We have a requirement that, in the Service order transaction IW31/ IW32 in the components tab , based on the material numbers entered by the user we need to call a Popup and inform user to fill in the correct value for special stock indicator.
   I tried using the BADI Workorder_update , but within that I could not call a pop up or a message. I tried using the exit EXIT_SAPLCOMK_014 where
   in I collect the incorrect components and call a POP UP with all of them. But once I call the POP UP the IW31/IW32 screen in the background goes
   to display mode and then we are not able to change the value as per information from the POP UP. This is the same problem that we faced with the
   BADI.
Please let me know if this could be handled in any other way.
Regards,
Prabaharan.G

check with exit
Transaction Code - IW31                     Create Order
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
Transaction Code - IW32                     CHANGE ORDER
Exit Name           Description
IWO10012            Maintenance order: Priority handling on central header
No of Exits:          1
USER EXIT
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.sap-img.com/ab038.htm
http://help.sap.com/saphelp_46c/helpdata/en/64/72369adc56d11195100060b03c6b76/frameset.htm
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci982756,00.html
Rewards if useful.........
Minal

Change on process chain not visible in display mode after transport

All,
We have changed a process chain where message notification was active in development.
We have deleted the notification and created a transport. This has been released and implemented into the QA system without a problem.
When displaying the new process chain in QA the change was not visible. But in change mode it is.
Can anyone tell us what might be a cause/solution for this? Also for future changes.
Gui error??
Thanks in advance.

hi,
Try activating the PC again in the QA.
if still it does reflect the message notification, then try creating the request again
in DEV and transport.
make sure you r out of the Process chains in DEV nad QA when transport happens.
This is just a practice.
Regards,
Dhanya.

Bug: Target Display Mode + optical audio cable = black screen

Using Target Display Mode on my iMac 27" (late-2012) with my MacBook Air (mid-2013) always resulted in a black screen on the iMac.
Hardware used:
MacBook Air mid-2013 (Mac OS X 10.8.4)
iMac 27" late-2012 (Mac OS X 10.8.4)
Thunderbolt cable between MBA and iMac
optical audio cable in iMac (digital audio out through optical mini jack plug)
Now, enter Target Display Mode on the iMac keyboard (Cmd+F2).
Result: black screen on the iMac (MBA is okay, optical audio is okay)
Workaround: unplug optical audio cable before entering Target Display Mode. Plug in the optical digital audio out cable after TDM is working and all is fine.
I sent a bug report through the feedback form. Just posting here to save others the few hours I had to spend finding the cause and workaround!
-- Richard

Thank you!! Saved me a trip to the Genius Bar.
Confirmed: Bug also exists in the new 2013 iMac under Mavericks. Unplugging the optical cable before entering Target Display Mode solved the problem.

HT1766 My Iphone 4s dont open up after i switched off it. when i open it it is stuck in the apple logo mode. I cannot switch it on again. is their any way to backup my photos since i cannot switch on my phone?

My iphone 4s dont open up after I switch off it. When I click the switch on button it blinks the apple logo in the black background. Is there anyway that i can backup my photos since I cannot open my phone?

Hello Ganewee,
Thank you for posting in the Apple Support Communities. It is certainly impossible to use your iPhone if it won't power on. I found some steps that can help with an issue like this:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 15 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
If you get to step 6 where you have to restore your iPhone and your iPhone is recognized in iTunes, I would try backing it up before going through the restore. You can find steps to backup your iPhone here:
iOS: How to back up
http://support.apple.com/kb/HT1766
I hope this helps!
Best,
Sheila M.

Iphone in recovery mode after update to bug fix on IOS 7

Iphone 4 has gone into recovery mode after updating a bug fix on IOS 7. Is there any way to fix it without having to restore?

No.
http://support.apple.com/kb/ht1808
1. Turn off device
2. Connect USB cable to computer; leave the other end alone
3. Press and hold the Home button down and connect the docking end of cable to device
4. Continue holding the Home button until you see the "Connect To iTune" screen
5. Release the Home button
6. Open iTune
7. You should see "iTunes has detected the device in recovery mode"
8. Use iTune to restore device
Note: You need to be patient and repeat the above many times to recover your device
Here's a link that discusses recover mode: http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm

TS3775 Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the

Hi I am trying to connect my mba mid 2011 with an imac 27" 2011 with target display mode tdm. When I am using a thunderbolt cable nothing will work. When I use a minidisplay cable, both screens turn blue but eventually nothing happens. What is the problem

Your answer is likely in Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support If you are familiar with this document, please re-read it and I suspect you may find something you either missed or are doing incorrectly.

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

My classic video ipod won't switch back to regular video mode after using it on an elliptical. The port still allows me to charge and works on the elliptical and treadmill but it will no longer change modes to allow me to watch my shows on the ipod screen

From the iPod's Main Menu choose Videos -> Settings and make sure TV Out is set to Off.
Otherwise, try a hard reset as well. To do this, press and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
B-rock

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Apex 4.2.1: Icon display mode bug

Minor but very annoying bug in 4.2.1. The App Builder application home page (4000:1) has a link in the right sidebar to choose Display Mode (Icons or plain text) for the 5 big buttons at the top (Run App, Supporting Objects, Shared Components, Utilities and Export/Import).
I prefer the Hide Icons setting and it is saved as a Per User preference and defaults to Icons so one would expect that once I set it to Hide Icons that's that.
But the Edit Page nn and Application nn links in the Developer toolbar on a rendered page are like f?p=4000:4150:953853045141::NO:*1*,4150... So they clear out the cache for page 1 and it resets to the default Icon view :-(
Could this please be fixed? I love the artwork and the quality of the icons but I really don't want it taking up so much screen real estate.
Thanks
Edited by: VANJ on Jan 9, 2013 2:56 PM

Hi Vikas,
I have the issue as bug# 16095793.
BTW, are you sure that the value is normally saved as a user preference? Because I did a quick test, changed to Hide Icons, logged out and then logged in again and the Builder showed the icons again. Could also not find it in the code that the value is stored as a preference.
Regards
Patrick
My Blog: http://www.inside-oracle-apex.com
APEX Plug-Ins: http://apex.oracle.com/plugins
Twitter: http://www.twitter.com/patrickwolf

HT4211 How do you switch from multitasking mode back to normal display mode?

How do you switch from multitasking mode back to normal display mode?

You mean switch from showing the recently used apps bar or dock back to regular home screen display mode?
If so, select the Home button.

I Mac 21 post 2012 don not switch to Target Display Mode

I connec a MiniDisplay to VGA adpter ion the Thunderbolt soket and connect it to a PC.Bur CMD+F2 does not switch my IMac to TDM
Any hint?
Thanks

Sorry but its just not going to work. In order to have TDM work on a 2011-2013 iMac your PC would need a Thunderbolt port that supports video out, chances are extremely slim you PC has that ability.
Please read Apple's FAQ on TDM and they will spell it out for you, you can get it by clicking Target Display Mode: Frequently Asked Questions (FAQ)

After Start the Query, change Display Mode. WHERE ??? QD-BI7.0

Hello Gurus,
where can I change my Display Mode of the Query. I have 12 rows, but shows me only 4 rows. Then I have to scroll right with a button.
Where Can I change something like that ?
Thanks

Vasanth,
This is what I'm already doing in the program by setting the edit mode for the column '3_ATWRT'. But I want to switch from edit to display mode and back again. This is not working. Only when I buildup the fieldcatalog this is working?
Kind regards,
Richard Meijn

Bugged display mode after cable switch

Similar Messages

Maybe you are looking for