BugId: 6647572; Exceptions and Alerts are not generated by getIFExists()

Hi
Does anyone have more information on this Bug Or know where the bug register for JCAPS is located.
I am basically after a quick description of how the bug manifest itself e.g. does the code continue as normal or does the getIFExists() call just block, etc
I am having issues with a production environment and this could be related.
The fix for this is part of the JCaps 5.1.3 rollup 3 and I am wondering if it would help solve my issues.
Cheers for any help
Tony

Hi Tony,
I am not sure what bug you are relating to, but I have used getIfExists() a bit without any issues, and am not aware of any bugs
If I remember correctly getIfExists() was introduced in 5.1.2 to eliminate a problem with the get() method
get() will retrieve a file from a folder and store it's contents as a data payload, now if NO file exists in the folder then get() throws an exception
In a lot of cases having no file in a folder when get() runs is part of normal business process (as it is a timing issue between file appearing and get() method execution), therefore no exception should be raised
Hence getIfExists() was introduced, this will NOT throw exception if no file is found in folder, and is normal expected behaviour
Hope that's what you're after
Marc

Similar Messages

Alerts are not generated at all

Hello.
Please, help me with following problem.
I have Site Server (SCCM 2012 with SP1) installed on server (Win 2008 R2 w SP1). On this server also installed MP, DP, FSP, RSP, Site Database, SUP. On second server (win 2008 R2 wSP1) installed MP and SUP.
I want to monitor some SCCM functionallity with Alerts. I configure alerts for MP Health, SUP Synchronization failures, Database low disk space and so on.
When i stop service (SMS Agent Host) on second server (or disconnect server from network) i can see Management Point status (in Site Status Status) changed to Critical (also appropriate event appears in event log). But no alert generates in SCCM.
In test environment (this is not copy of production environment.. simply clean install of SCCM with some configuration changes for testing purpose) alert successfully generates.
In test environment I see the following messages in smsdbmon.log:
SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:25:36 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)RCV: UPDATE on AlertForTrigger for SMS_Alert_upd_SMSProv_AlertForTrigger [16777224 ][72057594038089152] SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>set quoted_identifier on;set ansi_warnings on;set ansi_padding on;set ansi_nulls on;set concat_null_yields_null on;set arithabort on;set numeric_roundabort off;set DATEFORMAT mdy; SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spNotifyProvider @Component=N'SMS_Alert_upd_SMSProv_AlertForTrigger', @TableName=N'AlertForTrigger', @Action=2, @Key1=N'16777224', @Key2=N'', @Key3=N'' SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>delete from TableChangeNotifications where RecordID in (72057594038089152) SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>exec dbo.spGetChangeNotifications SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:29:01 3192 (0x0C78)SQL>>>>> Done. SMS_DATABASE_NOTIFICATION_MONITOR 28.11.2013 17:34:01 3192 (0x0C78)
In production system this messages not generated.
Also no alert generates for SUP Sync failure
mcp, mcdba, mcsa, mcse, ccna

Hello. No, problem not solved.
We agreed with customer, that we can use event viewer subscriptions instead of sccm alerts.
OK, but exactly how did you setup the alert?
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ

Lines are not generated for holidays and sundays

Hi
creating a sale order shcedule lines are not generated for sunday for a particular plant .
Schedule lines are generated for subsequent monday only.
the plant calander is also correct
with regards
partha

Hi
I would really double check the factory calendar ans the of the plant and sales organisation
regards,
Sidi

Mails are not generated in background Jobs and not shown in SOST.

Dear All,
I have facing issue regarding to system mails. I want to send mails the various reports automatically from SAP System to different recipients. So I scheduled that reports at background and in their spool list recipient I have added distribution list.
But that mails are not generated, it is not shown in transaction SOST also. When I send mails manually it goes successfully to only our company domain recipients. But not other domains. How should I resolve this problem?
Please help me out.
Thanks in advance.
Amit

Hi Srihari,
I have checked the background jobs they showed it finished. Following logs are shown in job logs. Is problem is due to 3rd log??
18.03.2012 14:23:34 Job started    00           516          S
18.03.2012 14:23:34 Step 001 started (program RFITEMAP, variant PDC FARMAR, user ID DEVELOPER1)      00           550          S
18.03.2012 14:23:37 No items selected (see long text)                                              MSITEM         033          I
18.03.2012 14:23:42 Spool request (number 0000026302) created without immediate output               SY           355          S
18.03.2012 14:23:46 Job finished                                                                     00           517          S
When I saw further details of 3rd log it following message.
No items selected (see long text)
    Message no. MSITEM033
Diagnosis
    No line items meeting your selection criteria could
    be for the following reasons:
    1.) No corresponding items have been posted.
    2.) You are not authorized to display this data.
    3.) The items have already been archived.
Please help me out.
Thanks
Amit

I receive an error stating user name and password are not valid on my ipad and iphone 3Gs when attempting to load email from my icloud account. When I log onto icloud from my Mac, it wont load the email either.

One day, my ipad and iphone pick up my emails (.mac account) from icloud just fine. the next day, I recieved error messages that say my user name and password are not accurate. I removed the icloud program on both devices and added it back on to both devices and get the same message. I logged into icloud from my Mac and while I can log in, it times out when I select email and wont load the email there either. Any Suggestons?

I am having the same problem; it started about 24-36 hours ago.
I know my ID/PW combo are correct because I can access all other aspects of iCloud except mail.
iPhone -- returns incorrect ID / Password
iPad -- Same
Mail.app on Mac -- returns incorrect password error
icloud.com -- allows me to log in and use all functions accept mail. When I try to use mail it stays on a white screen for about 60 seconds then returns a dialogue box that indicates a server error.
I contacted Apple and they placed my iCloud account into something called "Troubleshooting" mode. They generated a new strong password and sent it on to "Engineering."
I suspect there are a small number ofo users like you who are affected with the same problem I am. Too small a number for it to be reported as an outtage. I suggest you call Apple and open a case to have your mail investigaged.
Hope this helps...

HT201272 I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore the

I purchased three autobooks from itunes last weekend and after updating my ios to 7 they no longer appear. I looked at my purchse history and they are not showing in my purchase history. I do have the receipts for the charge. How do I restore these?

"I did make a full back up of my phone prior to updating the iOS"
Itunes content is not incliuded in the backup that itunes performs.
Audiobooks are not part of icloud and cannot be redownloaded.
You can try contacting itunes support and asking for an exception.

Columns PRIMARY_UNIT_OF_MEASURE and ENGINEERING_ITEM_FLAG are not updateabl

Hi All,
I'm getting this error while updating an item in a 11.5.10 instance using the PL/SQL API call EGO_ITEM_PUB.PROCESS_ITEM:
The columns PRIMARY_UNIT_OF_MEASURE and ENGINEERING_ITEM_FLAG are not updatable
Does anybody know what this is about? I'm not passing any of those values (not even sure if there is an ENGINEERING_ITEM_FLAG at all). I found this note, but I'm not sure if it is related to my problem in any way:
R12 Important Alert Regarding Dual-Control UOM Unit of Measure and Migration/Conversion Issues from 11i [ID 1198583.1]
btw: Item creation works fine...
If this is not the right forum for item/inventory questions, please let me know!
Thanks,
Konrad

Sandeep Gandhi, Independent Consultant wrote:
1) Check if you are using a template that is updating these fields.No, no template...
2) General SCM Discussion might be a better forum.Thanks, I will post this question over there!
Konrad

Report Alerts are not shown on crystal server 2011

Hi,
I have created alerts on From date and To Date. The alert is shown when the difference between From Date and To Date is more than an year. It is shown properly in the crystal report designer. When I am uploading the same report to the server the alerts are not shown on the server.
Can someone help me with the same.
Thanks,
Simran

Hi Jawahar,
I have uploaded the report in CMC using Add--> Local Document.
For Alerts I have checked the Box 'Enable Alert'. Still I am not getting a Pop Up which I get in the crystal report designer. Is the Alert sent on Crystal Server by email? I have currently selected default setting in Configure Alert Notification.
Regards,
Simran

Emails are not generated in CUP To approver, manager

Hi ALL,
I Configured one work flow in CUP. I did SMTP Server setting, EMAIL Remainder setting.
When I create new account request , CUP is provisioning access properly and automatic mail is going to that user. Mail is not coming to Approve r.
When I create other requests (change account etc) provisioning is done properly, but mails are not generated to user, approve r, manager .?
How can I fix this? Please suggest.
Thanks,
Joseph

Joseph,
There can be only 2 issues here:
1) SMTP server config is not correct or CUP is not able to reach SMTP server.
Ask Basis person to ping the SMTP server from CUP. If it works, then don't worry about 1).
2) Email reminder job is not running or emails are going to junk email
Check the log for email reminder job and make sure it is activated and running. check your junk mail folder.
Rgds,
Alpesh

Outbound Idocs are not generated for some material number MATNR

Hi all,
We are using a custom program to process the IDOCS to some other thirdparty systems.
but the problem is the IDOCS are not generated and also we can't find the IDocs in TRFC also.
But it is working for the other matnr.
I have already debug the custom program, and it is taking all the inputs correctly.
plz guide me guys

Hi Praveen,
This is the code I am using
LOOP AT GS-MATNR_WERKS ASSIGNING <MATNR_WERKS>
GS-COUNT = GS-COUNT + 1.
    GS-TEXT = 'IDOC for Material & & (& of &) is just being created'(001).
    REPLACE '&' WITH <MATNR_WERKS>-MATNR INTO GS-TEXT.
    REPLACE '&' WITH <MATNR_WERKS>-WERKS INTO GS-TEXT.
    REPLACE '&' WITH GS-COUNT            INTO GS-TEXT.
    REPLACE '&' WITH GS-LINES            INTO GS-TEXT.
    CONDENSE GS-TEXT.
    CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
         EXPORTING
              TEXT = GS-TEXT
validation code for the MATNR & WEKRS
CALL FUNCTION 'Z_MASTERIDOC_DISTRIB_ZCOPEBOM'
         EXPORTING
              MATNR        = <MATNR_WERKS>-MATNR
              WERKS        = <MATNR_WERKS>-WERKS
              MESSAGE_TYPE = P_MESTYP
GS-CREATED = GS-CREATED + 1.
    GS-COMMIT = GS-COMMIT + 1.
    IF GS-COMMIT >= 100.
      GS-COMMIT = 0.
      COMMIT WORK.
    ENDIF

Alerts are not sending mails

Hi All,
Alerts are not sending any mails in my oracle applications 11i.
Wf test mails are working fine.Periodic Alert Scheduler also scheduled and run smoothly.
I am not understand where we missed any setups.
any one can help me...
Regards
Raghu

Raghu,
See other threads for the same issue in this forum.
https://forums.oracle.com/forums/search.jspa?threadID=&q=alert+%2Bnot+%2Bsending+email&objID=f475&dateRange=all&userID=&numResults=30&rankBy=10001
Hope this helps,
Sandeep Gandhi

Ical alerts are not working on Lion

I've got a problem with the new ical on Lion: alerts are not working. Any clues?
(The "turn off all alerts" is unchecked )

Same problem, alerts are not being triggered. I am getting fast and perfect syncronizing between iCal, MobileMe Cal, and iPhone. But alerts are not happening consistantly.
Unreliable notification is a big problem.
I looked in my user preferences as noted by "xbarn" but there's no iCal login item. Can't imagine that iCal would need to be running for events to activate, since they are syncing correctly without iCal open.

Alerts are not working for Site collections in a content database

Hi,
We have been into a strange issue that alerts are not working for site collections from a particular content database. When user subscribed for the alerts, they are getting mail about their subscription but not after that for any new items/documents added
or changes happen in the list/document library.
We have tried with Immediate as well as scheduled alerts both are not working.
FYI, Alerts for all other site collections from different content database for the same web application are working without any issues.
Any help would be appreciated.
Thanks
Ramkumar

Looks like an Timer job Issue for your web application. Can you please check if these jobs are enabled and check error log for the alerts Timer jobs .Check whether the "Immediate Alerts" job is enabled for your web application.
job-immediate-alerts
job-daily-alerts
job-weekly-alerts
Please check this wiki -
Troubleshooting Steps for SharePoint Alert Email Does Not Go Out
Thanks
Ganesh Jat [My Blog |
LinkedIn | Twitter ]
Please click 'Mark As Answer' if a post solves your problem or 'Vote As Helpful' if it was useful.

Date fields for info structure S032 are not generated

Hi Experts,
I am trying to update set up tables for '02' using OLI2BW. I excluded some plants from selection and executed the set up. But the job run for few mins and completed with the message "Date fields for info structure S032 are not generated".
I couldn't see any records in RSA3.
Please through some light on this issue.
Points reward for usefull help.
Please no wild guess.
Regards,
-N-

Did you find out why. I am getting same message.
Thanks
Shalini

Emails have been sent from my iphone and they are not from me. what do I do to secure this doesn't happen again? I've already changed password

emails have been sent from my iphone and they are not from me. what do I do to secure this doesn't happen again? I've already changed password

I have this problem too, it's called "spoofing" aparently.
There isn't much you can do except change your email address which is a huge problem if like me you have an Apple one and can't change it without losing your whole iTunes and App purchase history which is a billiantly stupid bit of design on Apple's part.
There's some interesting stuff here: http://www.bluehostforum.com/showthread.php?132-how-to-stop-spoofed-email-addres ses
but I don't think there's much chance of applying it to iCloud but I am not an expert.

BugId: 6647572; Exceptions and Alerts are not generated by getIFExists()

Similar Messages

Maybe you are looking for