Bugs I found in the Windows 7 64-bit version

1) The Soft Proofing Menu selection in the Develop Module isn't displayed but typing S works
2) Scale to fit paper is always turned on in the Print Module even if Enlarge/reduce printing is unchecked  in Page setup.
3) Probably not a bug but a "feature" but changes made to Profile: and Intent: in Soft Profing are not caried forward to the Print Module.  In that you have to set them again before you print.  I could easly argue that settings for them in soft proofing should be caried forwward to the print module.  I assume, but have not varified that other changes, such as saturation, color, etc. made in soft proffing are applied when you go to the print module.  If so, why not profile and intent?

Are you missing Soft Proofing in the View menu, or the checkbox on the toolbar?  Press T if the latter.

Similar Messages

  • No LaserJet M1319f software bundle for Windows 7 (64 bit) version.

    Does anyone know if HP is going to have the entire software bundle for the HP LaserJet M1319f Multifunction Printer under the Windows 7 (64 bit) version? After updating my software,firmware and drivers for my new Win7-64bit pc I realized there was no software bundle installed. The drivers installed and I can print but no other software. It looks like they have it for the Win7-32bit and I tried to install it just to see if it would work and of course in errored out incompatible. Any information would be appreciated.  

    Below is a link to the HP site to download the printer software for Win 7x64. You will also notice an option to download a printer firmware update that is available for this model printer.
    I hope this helps..
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4063&lc=en&cc=us&dlc=en&sw_lang=&product=3547...
    Dave M.
    Say Thanks by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as Accepted Solution.
    I am an HP employee.

  • Can I download a program, nitro pro 7 onto mac pro when it says it's for windows?  If so do I choose the 32 or 64 bit version?

    Can I download a progran (Nitro pro 7) onto my mac pro notebook when it says it's for windows?  If so do I choose the 32 or 64 bit version?

    First, this forum is for the tower Mac Pro system. The MacBook Pro forum can be found here:
    MacBook Pro
    Anyway, Windows programs do not natively run on Macs. You may be able to get Nitro to run, though either via Boot Camp or one of the virtualization solutions, such as Parallels Desktop, VMWare Fusion, or VirtualBox, that allow you to run a "guest" OS under Mac OS X. You'll need to confirm whether Nitro will run in such circumstances, and if it will, you'll need a copy of Windows. Whether you choose the 32-bit or 64-bit version of Nitro will depend on what release of Windows you choose, or can, run. I'd suggest asking for advice in the Nitro forums, if the developer provides customer forums.
    Regards.

  • HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

  • For the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    for the 2013 versions of macbook pro should I purchase 32 bit windows or 64 bit version to be able to install it on macbook and use windows with bootcamp?

    Then you might check at any of the other university book stores or software stores or any computer store in town for the 64-bit version.
    If you want to use the 32-bit version from the school (you probably get it for free or very cheap) then you could purchase Parallels and run it as a virtual machine concurrently with OS X. There are some caveats:
    1. You have to purchase Parallels (there may be an academic discount.) List is $79.95.
    2. Your computer needs minimally 4 GBs of RAM, but realistically 8 GBs would be better.
    3. Parallels creates a pseudo-drive on your hard drive. It could easily require 50 GBs of disk space.
    Accommodating these might be more costly than buying 64-bit Windows 7. And, if you look online you may find them with an academic discount (or may be able to order it through the school.)

  • When is flash player going to work on the windows 7 64 - bit browser ?

    I have to use 3 different 32-bit  browsers because some things don't work on one browser and works on others...Cant use my 64-bit browser with out the flash player because my games don't work with out it...Just like to know when there going to come up with a flash player that will work for the windows 7 64-bit browser ? like to get it were i only need one...

    http://forums.adobe.com/message/5067997#5067997
    http://helpx.adobe.com/flash-player/release-note/fp_116_air_36_release_notes.html
    I suspect the 11.6 release will fix this up for you.
    Thanks,
    Chris

  • Hey. I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all... I searched drivers for the windows 8 32 bit but couldn't find any... Any solutions guys?

    Hey everyone, 
    I want to install windows 8 32bit on my mac pro (mid 2012). I upgraded the windows 7 I already had, but now I dont have drivers at all...
    I searched drivers for the windows 8 32 bit but couldn't find any...
    Any solutions guys?
    Thanks a lot.
    Sincerely,
    Chiponn

    There's been an update for OSX ML which addresses the issue for installing Windows 8 on bootcamp.
    It's NOT recommended that you Upgrade.. However, the way to get the drivers is:
    You'll need an external USB drive formatted as FAT for this.
    1) In OSX, start the Bootcamp Assistant
    2) Press Next
    3) UNTICK 'Remove WIndows 7 or Later Version'
    4) TICK Download the Latest Windows Support Software from Apple
    5) Insert USB drive
    6) Press CONTINUE
    The drivers should download, and copy a WIndowsSupport folder onto the USB drive.
    I did notice that Windows 8 still requires beta drivers for some aspects such as VGA (the Radio HD Card), which you can get on the AMD website.
    Futhermore, why are you using Windows 8 "32" bit when you blatently have a powerful 64bit?
    Anyway, hope this post helps ;-)

  • I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5 I am getting the following "The older version of Bonjour cannot be removed.  Contact your tech."  I've tried a good number of remedies to no avail.  Can anyone help?

    I have Windows XP, 32 bit version 2002 Svc Pack 2 and when trying to download iTunes 10.5.1 I am getting the following "The older version of Bonjour cannot be removed.  Contact your technical support."  I've tried a good number of remedies to no avail.  Can anyone help?

    For general advice see Troubleshooting issues with iTunes for Windows updates.
    The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
    Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
    If you are running 64-bit Windows and the above steps haven't helped try installing the version of iTunes that can be downloaded from this support document. iTunes 12.1 for Windows (64-bit — for older video cards)
    If you still have no luck try reinstalling iTunes 12.0, links in the user tip.
    tt2

  • My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

    My macbook pro (10.6.8 version) the screen turns blue, can not operate, forced shutdown, I installed the windows 7 Home Basic version.

    To fix your issue is too complicated and lengthy to go into all of it here, it will require the services of person very familiar and experienced with Mac's to first recover your data and then restore OS X back to a functional state, then hopefully achieve the goals you were attempting.
    I advise you hire the services of a local Mac computer support technician experienced in these matters.
    Have them look at your Wifi and computer backup proceedures in the process.
    Good Luck.

  • What is the windows server 2013 license version than I need to install workflow manager 1.0

    what is the windows server 2013 license version than I need to install workflow manager 1.0?
    enterprise or standard? can I install it on datacenter?
    please provide me with the reference.
    thanks

    Workflow Manager will work with either SharePoint Enterprise or Standard.  It doesn't work well with Foundations since it depends on User Profiles to pass user identity to the workflow.  And yes you can install it on Windows Server datacenter edition.
     Here are the supported platforms for installation
    http://msdn.microsoft.com/en-us/library/jj193487(v=azure.10).aspx
    This article talks about integration with SharePoint and states that Foundation is not supported, but it doesn't differentiate between the Server editions, so any edition will do.
    http://technet.microsoft.com/en-us/library/jj658588.aspx
    Paul Stork SharePoint Server MVP
    Principal Architect: Blue Chip Consulting Group
    Blog: http://dontpapanic.com/blog
    Twitter: Follow @pstork
    Please remember to mark your question as "answered" if this solves your problem.

  • HT1222 i found itunes for windows 8 64 bit but after downloading it iwas told it cant work in my system. what can i do to make it work?

    i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

    i found itunes for windows 8 64 bits after downloading it i got an error message saying it cant work on my system. what can i do to make it work?

  • Premere Elements 8 on (Windows 7) 64 bit version

    I've seen alot of complaints about Premere and Windows 64 bit on other forums. Many are older versions, 4 and others. I'm currently running it in 32 bit Vista but I can't always leave good enough alone. I seen the new desktops at Walmart and found most come with the new Windows 7 in the 64 bit version along with a 6GB ram capacity and I thought I'd put the question out there.
    Premere Elements 8 on (Windows 7) 64 bit version
    YES or NO

    Ok I think I know the reason for this.
    Toshiba provides a password plugin with their finger print manager software. After I updated my laptop with the finger print manager, Firefox stopped working, like described above.
    Solution is pretty easy:
    1) Boot firefox in safe-mode
    2) Go into Tools->Add Ons->Extensions
    3) Hit disable on the 'Automatic password input in FX 1.0' extension
    4) Restart firefox in normal mode

  • ITunes for Windows 7, 64-bit version not connecting to iPod

    Hi, everyone! I'm having problems connecting my iPod Touch to iTunes version 11.0.1.12. I'm running Windows 7, 64-bit version on my PC. Whenever I open iTunes with my iPod Touch connected to my PC, iTunes immediately gives me the following error message:
    "This iPod cannot be used because the required software is not installed. Run the iTunes installer to remove iTunes, then install the 64-bit version of iTunes."
    This confuses me because I already have the 64-bit version for Windows 7 installed on my PC. I've already uninstalled and reinstalled the 64-bit version three times; however, I'm still getting the same error message whenever I connect my iPod Touch and open iTunes.
    Any help would be greatly appreciated. Thanks!

    now nothing happens when I connect the iPod by USB - it's not even charging.
    Do you have a laptop, Nin?
    If so, the following document might be of some assistance with that:
    [iPod not recognized when connected to Windows laptop over USB|http://support.apple.com/kb/TS1401]
    (That issue seems to match your recognition and charging symptoms.)

  • ActiveX problem in windows 7 64 bit version...

    I have x64 bit windows 7 version operating system i used my all report as printmode="Activex"
    1. http://i41.tinypic.com/k9861g.png
    Check this URL.
    I just want to know after installed the printconrol.dll, how the printcontrol.dll get registered / also in register
    entry.
    Let me know the procedure...
    2.i hAVE INSTALLED THIS Crystal Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit) IN MY
    WINDOWS 7 64 BIT VERSION ON MY LOCAL PC WHICH HAS NO INTERNET ACCESSS
    FROM THIS LINK
    http://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes_boj/sdn_oss_boj_bi/sap
    (bD1lbiZjPTAwMQ==)/bc/bsp/spn/scn_bosap/notes
    %7B6163636573733d36393736354636443646363436353344333933393338323636393736354637333631373036453646373436353733354636
    453735364436323635373233443330333033303331333633343335333033303336%7D.do
    YOU HAVE SHOWN HOW TO REGSITER FOR vs2010..
    regsvr32 "%programfiles(x86)%SAP BusinessObjectsCrystal Reports for .NET Framework 4.0CommonCrystal Reports
    2011crystalreportviewersActiveXControls
    BUT IM NOT FINDING THE PATH LIKE the above TO REGISTER MY PRINTCONTROL.DLL IN WIN7 64BIT AFTER INSTALLING Crystal
    Reports Basic for Visual Studio 2008 x64 Redistributable Package (64 bit)
    so would you please tell me how the above location comes for you..? to REGISTER DLL for us we are not getting the
    location in my pc.
    3. I COPIED PRINCONTROLL.DLL IN D: drive of win 7 64bit THEN I USED rEGSVR32 D:PRINTCONTROL.DLL IT SHOW DLL
    REGSITER succesfully on clicking print button in CR toolbar the print dilogues comes get disapper?let me know whats
    the problem. I applied the same pocedure on windows xp machine it works fine..
    4. I have printcontrol.dll in downloaded prgram file. I just want to register the dll, it is no registering, please
    let me know how to register.
    thanks lot to Ludek Uher and Don Williams hows support are very good.. I hope i will get all the aboves in details

    1) After Installing this software https://smpdl.sap-ag.de/~sapidp/012002523100009351332008E/CRBasicVS2008_redist_x64.zip what i have to do let me know other steps and will active x print control works or i have to do some more things...
    2) i asked you above if i have internet in win 7 64 bit pc on clicking print button it shows me this dialogue
    http://i41.tinypic.com/k9861g.png
    after clicking Install Printcontrol.dll  it goes to C:\Windows\Downloaded Program Files so how it register i want to know..?
    2 point is my important want....
    Thanks for your quick reply
    Edited by: Priya_here on Nov 16, 2011 6:14 PM

  • How can I reinstall Bluetooth drivers after loading windows 7 64 bit version on my 2010 iMac?

    I have just uninstalled windows 7 32 bit version which I have been using for ages and upgraded to the 64 bit version. I did this from the windows partition in my bootcamp divided hard drive. I then reinstalled the drivers using the application DVD which came with my machine but the Bluetooth driver is missing. One thought I have is whether I would be able to use the driver DVD which came with my 2011 MacBook Air (which has been running fine on windows 64bit version since I bought it)
    Would this work or any other ideas?

    moirl wrote:
    5.  I can not get anything off the Blackberry (photos etc.).
    As was stated above:
    1. Go to Options >> Media Card (or Memory)
    (some themes or BlackBerrys may call this "Settings >> Media Card")
    2. Check the following settings (if they are not listed this way, then change to reflect the following:
    a) Media Card Support: On
    b) Mass Storage Mode Support: On
    c) Auto Enable Mass Storage: Yes
    3. Save the settings and exit
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for